Choosing a date, then to have this date fill in the next two weeks.

Similar Questions

• Windows 7 updates have been a failure for the past two weeks.

  The download of updates, restart computer, Setup starts and then message comes back saying it failed and returning from changes.

  Hi Tassie8655,

  ·         What is the error message or the error code you get?

  This problem may occur if one of the security software and updates of Windows services are not started.

  Follow the steps to check the error code.

  1. click Start , and type Windows Update in Start the Search.
  2. click on view Update history in the left pane.
  3. law click on Update that failed to install and click on see Details.

  Make a note of the error code and provide the same.

  However, you can reset the Windows Update components, download the Microsoft fix - it from the link below and run, this automatically resets the components of Windows on the computer.

  How to reset the Windows Update components?: http://support.Microsoft.com/kb/971058

  I suggest that you temporarily disable the security software on the computer, and then run Windows updates. Make sure that you enable the security software on the computer after you run Windows updates.

  If the problem persists always, however, try the steps manually described in the article.

  You cannot install some programs or updates: http://support.Microsoft.com/kb/822798

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

  Original title: someone help please?

  Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

  So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

  Hello

  1. have you made changes on the computer before this problem?
  2 - what you want to say that you receive this error message during the installation of Windows XP?

  Check to see if the following is useful.

  Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

  Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

• Why I have this message? Error: the floppy drive seek failure

  Original title: why I have this message?

  floppy drive seek failure. I don't have a floppy drive on my cumputer.

  Hello

  This problem occurs if the following two conditions are met:

  The computer has no floppy drive.
  1. the floppy drive is enabled in the BIOS settings.
  2. for example, this problem may occur if the floppy drive is enabled in the BIOS settings by default.

  To resolve this issue, use the system setup program to disable the floppy drive in the computer BIOS. You can contact the manufacturer of your computer to help make these changes.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved.
  Changes to settings are at your own risk.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I get Microsoft updates in windows update. I don't have this option available in the settings?

  * Original Title: windows update

  How can I get Microsoft updates in windows update. I don't have this option available in the settings? TIA

  Yes other MS is installed, I updated them. I stupidly reinstalled Win7 and unchecked ticks for all updates of MS. I reinstalled agent but no joy.

  Attaches with a registry change.

• I have an iMac 3.06 GHz with only 4 GB of memory.  During last two weeks, whDurin the past two weeks, when I click on 'Edit', it does not hold the menu drop down.    Need my Mac 'cleansing' and how do I get rid of unnecessary files?

  I have an iMac 3.06 GHz with only 4 GB of memory.  During the last two weeks, when working with documents, buttons on the desktop did not have in the drop down menus.    How can I get rid of unnecessary files and wipe the hard drive?

  Drop down menus stay open at other times? Have you tried another mouse? More information please write an effective communities of Apple support question

• How can I save a form so that the data is visible.  Currently, I don't see what has been typed on the form by clicking on the cell and then it disappears when I move to the next cell.

  How can I save a form so that the input data are visible.  When I click on the cell, I can see what has been entered, but when I go to the next cell, the data is hidden again.  I would like to print the file with the visible information that has already been entered.

  To clarify what mentioned TSN, forms PDF that are used and saved by the application on a Mac are corrupt in a number of ways. When a form that has been corrupted by the Preview is opened in Acrobat/Reader, one of the symptoms is exactly what you describe. If you have access to Acrobat and the original form, empty, not corrupted, you can export the form data in a data file (e.g., FDF) and import the shape of FDF data in the blank form.

• date fill in the dimension with the correct values

  Hi all
  
  I have a 'simple' problem, but can't get it resolved! The calculations of the CDA in the cube not 'reset' at the right moment in time (they should 'reset' on the exercise, but it actually seems to happen on the normal calendar year).
  
  Our dimensions and cubes are MOLAP. There is a relational table that contains columns with values for both a calendar hierarchy as well as a hierarchy of exercise. This table tells the date dimension (only the tax hierarchy as MOLAP, we have just a fiscal hierarchy). The result seems correct in the data viewer.
  
  The cube is filled with both relational sources. A perspective provides the measurement values and CODE (distinctive signs of business) values for each dimension involved. In the case of the date dimension, it provides the code for the involved level value in which we cube (months).
  
  I made a very simple testcase with only 1 dimension (date) and 1 small cube. The cube uses only the dimesion of date (to load the cube on the fiscal hierarchy at the month level) and has 1 base measure that is loaded with a simple number and 1 calculated measure that calculates the value of the CDA for this basic measure. The calculated measure is added to the cube designer OWB by using the button 'generate calculated measures' and choosing the function 'Year to Date'.
  
  When complete the cube and using the data viewer to verify the results, CDA values don't 'reset' at the end of the year. They seem to reset at the end of the normal calendar year!
  After some tests, I have concluded that this has to do with the values I provide to fill the date dimension, but I can't figure out what should be the change, and I can't find examples anywhere.
  
  Someone out there a calculation for a YEAR of work in MOLAP?
  
  Any help much appreciated.
  Kind regards
  Ed
  

  Hi Ed

  It can be an inherent behavior of the time dimension in the AWs where the CDA on financial is not supported out of the box, see the OLAP thread below. Have you tried just build your simple case in AWM recreate? If you can get around using a custom expression, you should be able to define this custom OWB and still keep the design you have.

  Calculated against calendar CDA CDA tax measure

  See you soon
  David

• I have this dell laptop that the screen does not come on.

  Hi, please I have this new dell laptop screen would not come on, even if the system is turned on. It's a dell inspiron and still under warranty but I move to Africa now since the United Kingdom what makes deficult to return

  can someone help me

  The Dell warranty seems all over the world, if you have a guarantee of weekday plan.

  Call Dell technical support & see where that gets you

• Is it possible to choose texts related frameworks that have only a fill color

  I have a script which will select blocks of text, but I came into a situation where I have to exclude any block of text that do not have a fill color. I don't see a Boolean property filled for the attributes of character or text blocks. Does anyone know if this is possible?

  That's what I used to select all text on all layers visible and unlocked. I don't see a way to exclude linked text frames that have no fillcolor.

  if (app.documents.length > 0 ) {
    var doc = app.activeDocument;
    var numTextFrames = 0;
    for (  i = 0; i < doc.textFrames.length; i++ ) {
        try {
        textArtRange = doc.textFrames[i];
        textArtRange.selected = true;
        } catch (e) {}
        }
    }

  Any help would be appreciated,

  Duane

  Here you go,

  if (app.documents.length > 0 ) {
      var doc = app.activeDocument;
      var numTextFrames = doc.textFrames.length;
      for (i=0; i		   

• I am a member of Netflex and they want to download me Silverlite. I do not have this program. All the ideas that will avoid this program.

  Firefox has a Patch or a program to replace Silverlite for Netflex?

  Hello, unfortunately it is not possible to videos from netflix without the plugin silverlight for now. This may change in the future when netflix transitions however its content html5 video: http://techblog.netflix.com/2013/04/html5-video-at-netflix.html

• Order form does not update grand total calculation until I have indicate a number on the next line.

  I created a purchase order with a "quantity" column, a column of job description, a unit price column and a point $ column total. I've set the total column of $ point to calculate automatically once a quantity and unit price entered, and it works immediately once the unit price and quantity entered. But my grand total at the bottom of the total column $ is set to calculate all the lines of total $ point, but the total general don't not updated to reflect the $ total for a given line (e.g. line B) until I have begin to type a number for the next line (e.g. line C). So, I always end up having to create a line of extra reserved space with a quantity of 0, just to get my total general to update. Is there a way to fix this?

  It is most likely a problem with the calculation of field order. You must ensure that the total is calculated after row grand totals.

  This can be set in form editing mode, under the order of computation of Set field - other tasks.

• Shuffle all is no longer works, I have to manually advance to the next song or listen to the same song over and over again

  Since the update to iOS 9.3.1 my iphone is more my music mix.  I can type shuffle all, but he played just the same song over and over until I manually advance to the next song.  Any suggestions on how to fix it?

  It's strange because on my iPhone 6 if I hit Shuffle All (at the top - it doesn't matter if my view of my library is on songs, Albums, artists) it certainly mixes between songs and does not play the same song over and over again.

  Just to be sure that we are talking about the same thing-, you tap my music at the bottom of the screen and then click on library above, then press Shuffle All? Because that's what I did and had no problems. Maybe try forced him to leave the music application (double clicking the HOME button, and then drag upward on music app) or even try to do a hard reset of the iPhone (now the HOME and POWER buttons until the Apple logo appears).

• I get this error message. The next (s) start or start failed to load system: aswSnx.

  Microsoft no longer offers free assistance to XP Pro. I have a reinstallation CD.  Could someone please me directly how to use; fix it witoout loseing all my files?

  Thanks in advance

  You do not specify whether or not this error is preventing your computer from starting.

  If it does not start, try to start in "Safe Mode" by repeatedly pressing the F8 key as your computer starts.

  From what I can tell, 'aswSnx' is a file associated with the program "Avast!" You can try to uninstall Avast! of your system and later re-install.  I found a few articles that explain how to uninstall Mode applications without failure (if that's the only way to boot your system):

  <>http://www.gHacks.NET/2010/07/18/how-to-uninstall-software-in-Windows-safe-mode/ >
    <>http://www.windowsnetworking.com/kbase/WindowsTips/WindowsXP/AdminTips/miscellaneous/UninstallapplicationsinSafeMode.html >

  You can also try to use "msconfig" to turn off Avast! on reboot

  "Hot to troubleshoot configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  Another suggestion is to post in the Avast"forum
    <>http://Forum.avast.com/ >

  HTH,
  JW

• HAVE CC 2014 won't open. With the help of Windows 7 - tried several fixes no help. Low = error message of HAVE before we get to the next = top message from the page. Suggestions please! Thank you - M

  JavaScript:;

  Hi Jacob,

  I just reinstalled and tried to reopen - NADA!

  I remove preferences & tried vacuuming before reinstalling.

  I have to get off this machine - have been at this for a good 8 hours - will be back at it tomorrow.

  If you have other potential solutions much appreciated - o got a serious job to do - of course!

  Thanks bunches - hope to hear back from is - M