Chronology of the break to allow several slidelets to play

Similar Questions

• Chronology of the break for a specified time

  I need to make an interactive presentation, I did earlier in a presentation by force.

  I thought I could take just the buttons that make progress animation and exchange the sym.stop (); functions for something that everything stops the timeline for a given amount of milliseconds, but I can't for the life of understand me how this function would be. I'm not a programmer, so please: babysteps

  Thank you...

  Thus, in the example above, I use setTimeout-

  {setTimeout (function ()}

  SYM. Stop();

  (}, 2000);

  {setTimeout (function ()}

  SYM. Play();

  (}, 4000);

  This stops the animation after 2 seconds, then sym.play(1000) fires after 4 seconds. Similarly, you can change to 15 seconds for your particular case.

  Thank you and best regards,

  Roger Simon

• Chronology of the break on a HTML5 canvas file

  Hello

  Someone at - he paused a code of create.js or something, that would allow me to put the timeline in flash for a specified time?

  I am struggling to find something that actually works, as part of a timeline.

  Thank you

  answer to the question in the message 5.

• audit trail helps the poster and allows several track audit on a table

  Hi all
  
  Can I update to audit on the view?
  
  Can I allow multiple tracks of verification on the hz_cust_acct_sites_all table?
  
  Concerning

  I try to interpret your post...

  1. If you want to say "I can check update to the poster", then Yes.
  2. you can audit multiple operations on a single table, such as audit select, update and insert on the table hz_cut...

• Chronology of the break?

  I am currently working on a project that requires me to interrupt the timeline, without pause is selected manually, and then play again with a button. I did a fair bit of research and you do not answer, find someone here could help please?

  use stop()

• Error in uncheck allow several resource object in the console design

  Hello

  I need to uncheck the allow several object resource into Console design, but operation generates an error, and the change is not applied.

  IOM will be 11 GR 1 material.

  DB read: select distinct ugp.ugp_key, ugp.ugp_name, ugp.ugp_display_name of the PMU PMU, gpg gpg where ugp.ugp_key = gpg.ugp_key and (gpg.gpg_ugp_key (23))
  [2013 03-21 T 06: 24:27.516 - 07:00] [oim_server1] [NOTIFICATION] [] [XELLERATE. PERFORMANCE] [tid: [ASSETS].] [ExecuteThread: '3' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [ecid: 91039ee4d5030ad9:6a4e2a3a:13d88717e95 :-8000-0000000000005521,0] [APP: IOM #11.1.1.3.0] query: DB: LOAD 0: 0, TOTAL: 0
  [2013 03-21 T 06: 24:27.516 - 07:00] [oim_server1] [NOTIFICATION] [] [XELLERATE. DATABASE] [tid: [ASSETS].] [ExecuteThread: '3' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 91039ee4d5030ad9:6a4e2a3a:13d88717e95 :-8000-0000000000005521,0] [APP: #11.1.1.3.0 IOM] DB read: SELECT count (*) as count of oug WHERE obj_key = 7 and (ugp_key in (1,5,6,7,8,9,10,11,12,13,14,15,16,17,18,20,21,22,23)) and oug_write = '1'
  [2013 03-21 T 06: 24:27.517 - 07:00] [oim_server1] [NOTIFICATION] [] [XELLERATE. PERFORMANCE] [tid: [ASSETS].] [ExecuteThread: '3' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [ecid: 91039ee4d5030ad9:6a4e2a3a:13d88717e95 :-8000-0000000000005521,0] [APP: IOM #11.1.1.3.0] query: DB: LOAD 0: 0, TOTAL: 0
  [2013 03-21 T 06: 24:27.517 - 07:00] [oim_server1] [NOTIFICATION] [] [XELLERATE. DATABASE] [tid: [ASSETS].] [ExecuteThread: '3' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 91039ee4d5030ad9:6a4e2a3a:13d88717e95 :-8000-0000000000005521,0] [APP: #11.1.1.3.0 IOM] DB read: select evt.evt_key, evt.evt_name, evt.evt_package dob dob, evt evt, dvt dvt where dob.dob_key = dvt.dob_key and dvt.evt_key = evt.evt_key and (dob.dob_name = 'com.thortech.xl.dataobj.tcOBJ' or dob.dob_name = dob.dob_name = 'com.thortech.xl.dataobj.tcDataObj' or 'com.thortech.xl.dataobj.tcTableDataObj') and dvt.dvt_pre_update_sequence > 0 by dvt.dvt_pre_update_sequence order
  [2013 03-21 T 06: 24:27.518 - 07:00] [oim_server1] [NOTIFICATION] [] [XELLERATE. PERFORMANCE] [tid: [ASSETS].] [ExecuteThread: '3' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 91039ee4d5030ad9:6a4e2a3a:13d88717e95 :-8000-0000000000005521,0] [APP: IOM #11.1.1.3.0] query: DB: 1, LOAD: 0, TOTAL: 1
  [2013 03-21 T 06: 24:27.518 - 07:00] [oim_server1] [ERROR] [] [XELLERATE. SERVER] [tid: [ASSETS].] [ExecuteThread: '3' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 91039ee4d5030ad9:6a4e2a3a:13d88717e95 :-8000-0000000000005521,0] [APP: IOM #11.1.1.3.0] class/method: tcDataObj/save error: failed to update data
  [2013 03-21 T 06: 24:27.518 - 07:00] [oim_server1] [NOTIFICATION] [] [XELLERATE. DATABASE] [tid: [ASSETS].] [ExecuteThread: '3' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 91039ee4d5030ad9:6a4e2a3a:13d88717e95 :-8000-0000000000005521,0] [APP: #11.1.1.3.0 IOM] DB read: select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity of err where err_code ='DOBJ. UPDATE_FAILED'
  [2013 03-21 T 06: 24:27.519 - 07:00] [oim_server1] [NOTIFICATION] [] [XELLERATE. PERFORMANCE] [tid: [ASSETS].] [ExecuteThread: '3' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 91039ee4d5030ad9:6a4e2a3a:13d88717e95 :-8000-0000000000005521,0] [APP: IOM #11.1.1.3.0] query: DB: 1, LOAD: 0, TOTAL: 1
  [2013 03-21 T 06: 24:27.519 - 07:00] [oim_server1] [ERROR] [] [XELLERATE. DATABASE] [tid: [ASSETS].] [ExecuteThread: '3' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 91039ee4d5030ad9:6a4e2a3a:13d88717e95 :-8000-0000000000005521,0] [APP: IOM #11.1.1.3.0] class/method: tcDataBase/rollbackTransaction some problems: Rollback performed [[...]
  java.lang.Exception: Rollback performed
  at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(tcDataBase.java:578)
  at com.thortech.xl.dataobj.tcDataObj.rollback(tcDataObj.java:904)
  at com.thortech.xl.dataobj.tcDataObj.doRollback(tcDataObj.java:867)
  at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:538)
  at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2906)

  After you apply BP06, let the Multiple Option cannot be changed from true to False [1556385.1 ID]

• ___I accidentally hidden this bar at the top of the screen that allows me to hide/close several documents...

  ___I accidentally hidden this bar at the top of the screen that allows me to hide/close several documents... I pressed something, but I don't know what--it's hard to hide PS now (Version CS6)

  Two possible options:

  Windows > Application Frame

  If it is off - activate

  Second:

  You have more than one monitor?

  If so there may be a small slice of the title bar on your follow-up right that you can use to drag the frame of the application down

• several resources configured by the access policy, allow multiple set to no

  Hi Experts,
  
  I have a problem with the automatic supply of the resource based access policy Ad and Exchange resource (or any two resources that are dependent on each other).
  
  That's what I'm doing (11.1.1.3 bp2):
  The user of the ad and the Exchange are the two auto-save, auto - prefill and do not allow several. Exchange depends on the AD Server (which assigns the user ad). Based on a rule, the user gets a role, having an access policy giving the user of the ad server and Exchange resources.
  
  Because my AD Server/user implementation updates the user profile during deployment of the access policy is either revalued. At this point the resource Exchange has not any State yet, even if it is waiting on the AD resource to be configured. Accordingly, another Exchange resource is added to a kind of queue, no AD resource yet again in a wait state. As soon as the resource AD is supplied all the wait resource Exchange are provided leading to many Exchange resources.
  
  On a side note, when a resource is assigned manually in the interface web IOM, that once all void tasks are made (or failed) the resource appears on the tab "resources" for a user. I think it would be more logical that this resource is listed immediately to the provision of status. Maybe it's to be able to perform a restore or validation occurs only after all the tasks are performed.
  Bundle 4 Patch did not help at all.
  
  Suggestions are welcome.
  
  Kind regards
  
  Jan Willem Beusink

  Hello

  Thank you, we did the debug more. The real problem was setting a value on the profile of the user, by a membership rule added a user to a different role, leading to the evaluation of access policies. in the process of AD in combination with prepopulators on the Exchange form that take time to complete (a few seconds). If Exchange prepops where not ready before access where assessed to new policies, we got two exchange resources. We solved the problem by using (a variant of) your suggestion leaving the task of Exchange processes a UDF and adapt the rule to check for this field's initial membership.

  Hi low (member of the team of Jan Willem)

• Problem with the change of a 'State' the substitution of one break of the chronology of the objects

  Here is my setup: I have a single slide for learning select 9 melodies 'text buttons' to view 9 different definitions.  To do this, I set myself to each buttons to change the "State" of the original image for the introduction of a 'legend of text' containing the definition of that label of buttons.  I also three navigation buttons (output, back and next; button_19 _20 & _21) with breaks built into the end of the timeline. coinciding with the end of the audio narration for this slide.

  Here's my problem: the calendar runs and stops as it should until the learner chooses one of the 'text' buttons after that the timeline is suspended; how it seems to send a command to "continue" and substitutes at the break, and brings the learner to the next slide.

  This has something to do with the function "States"?  I used to do exactly the same thing in Cap 7 with stocks advanced without any problem.

  Thanks in advance for the help.

  v/r

  Jay

  

  If it's 9 Captivate, locate the box continue a project of play in the Actions section and deselect buttons for each.

• Adobe Premiere 6.5 - chronology of the changes - did I click on something?

  Could I have clicked something that I never knew - who made these changes...

  I used the Adobe Premiere 6.5 since 2002 and now, in the last two hours.

  all of a sudden the timeline screen looks different

  1) there is division much more time in the upper part of the chronology...

  instead of 10:32 it shows 7-seater 0,10,32,00.

  (2) I love customizing my video dissolves or fades using the elastic...

  There is no line rubberband running through the video, they are just blocks...

  (the audio was a rubberband on her line and I could raise and lower the volume)...

  (3) my firewire does not record the new device when I am attaching my DV camcorder to it...

  I even changed on the USB cable firewire to make sure that it was not the culprit

  and I changed the camcorder to make sure that it was not more...

  So for now, it's not capture, changed the thoroughness in the timeline

  also do not allow me to do choices customized on the timeline for the video...

  I have something inadvertently affected?  Ideas?

  I would be recognizing all input on this topic, thanks a lot!  Dee. Douglas

  So much WORSE... once I have shut down the computer and waited for several hours, I was able to jump start the CAPTURE feature... ranging from playing the video, the record button, power on/off, unplug the firewire, opening various windows where the video was stored... the camera he finally arrived!  I tried yesterday, but maybe with this CP and closing time - was the combination of what it takes to get going again... Hope Santa gets me the new computer and editing for Christmas software... fingers crossed.  Dee.  PS. the elastic line meet again running through the video and audio!  However, the timeline has still much more information in the upper part of the chronology... figure I click an involuntary element?

• How to prevent the button to allow to appear?

  Almost everytime I go on a legitimate site, firefox displays a button at the top right of the screen called "allow."
  Sometimes, I have to click several times. How can I get rid of him?

  I use windows 7 and do not remember having the problem on XP. I currently use version 28.0

  Thank you

  Hello, you can turn off these warnings, when you go to firefox > options > advanced > General > warn me when websites try to redirect or reload the page.

• the old version allowed me to save all open tabs by giving it a name, i.e. on 29 April, but I can't find it in the new version. Is there something like this? If so, I really want to come back

  Tonight, for example, I have several tabs open that I would close but reopen tomorrow.

  I would like to save them all as '30 April' in my favorites... the 0ld version allowed me to do, but I can't find it in the new version.

  The only way I don't seem to lose these tabs open, I work with is making "Contol + delete", but I know that this should not be done all the time...

  There must be a better way, but if it does not exist, I would be able to come back and work with the old version?

  Some menu entries are hidden by default and only appear if you use the keyboard to open the menu.

  You can see the difference if you use Alt + F or Alt + B to open the menu 'File' and 'Favorites' and compare them to what see you if you use the mouse to open the menu after completing the bar menus visible by pressing Alt, or by pressing F10.

  • "To bookmark all tabs" (Shift + Ctrl + D) is no longer present in the menu bookmarks unless you open the bookmarks menu via the keyboard (Alt + B).
  • 'Bookmark this Page' is accessible through the context menu of the browser page.
  • "To bookmark all tabs" are available through the context menu of a tab on the tab bar.

  See also:

  • / KB/How - do - i - use - Bookmarks

• Why is the iPhoto online allow you to place orders in the "basket" and avoid each item being shipped and invoiced separately ($ 5.99 each)?

  Why is the iPhoto online allow you to place orders in the "basket" and avoid each item being shipped and invoiced separately ($ 5.99 each)?

  Why? It's their policy. Several copies of an order can be combined, but not multiple orders.

• Photosmart 5520 transforms the unique items in several separate files when scanning to the imac

  My 5520 when scanning for my imac (on OSX10.6.8) wireless began to separate a page I'm scanning in several separate files that contain certain words or images, but not all of the content. I have reset to factory settings, but the problem remains the scanner are useless. Can someone help me set it up so it parses everthing on the page in one file please?

  Hello
  The default analysis workflows configured to detect separate elements. don't forget to change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan the image.

  Kind regards
  Shlomi

• How to change the settings to allow the Streak to install non-market apps?

  I would like to install on my Dell Streak non-commercial apps.

  When I try to do, I get a blocked message indicating 'Install.  For security, your device is configured to block the installation of applications not from not not in Android Market. »

  Clicking the settings button on this message opens Application settings screen, which lists manage Applications and development.  Where is the setting to allow me to install non-market apps?  How do I change these settings?

  Kalmus M

  Here's how to break the stifling grip of the AT & T on your state of factory (build 6601) Dell Streak:

  1. Dial * #* #307 #* #* on your Streak. Other than a quick flash on the screen, it will look like nothing happened.
  2. Go to your app drawer/program menu and tap a new icon called EMList. If the icon is not there, turn off the Streak. It should be there when you turn it on again.
  3. Scroll to the bottom and press app_security.
  4. Press update of unknown resource property to activate it.

  That's all!

  To confirm that it worked, press Home, and then Menu-> Settings-> Applications. You should now see the option 'unknown Sources '. Now you can download and install any application compatible 1.6 you will find with ease!

  To uninstall EMList, dial * #* #* #* #308 on your Streak. Enjoy!

  Fox