CineForm Codec blocks Media Encoder CS4

Try the Cineform Neoscene current evaluation version. Regardless of the Codec settings, exporting with Cineform Codec blocks my SOUL (PPro CS4). Eventually only a hard reboot will get things running again. Other codecs work very well.  Hoping for some suggestions to this address.

I need to intermediate rendering - one of the 3 bands of project (all images a XHA1 on nine cassettes HD) is corrupted and I have to drag the audio autour and export synchronized clips of this tape images capture with frames has fallen/red resulting in quirky (not not adrift, aparrently) audio/video synchronization. (Same - or worse - capture problem with split HDV and Cineform captures also. Renounced Digest footage synched after days of attempts.) Have successfully captured many hours of DV with the system with the exception of this one band.

The export problem occurs with any of the images (not included) I put on a timeline in any format of project I tried (including DV). It occurs if the body runs, reduced or closed when the SOUL is executed.

(This installation of CS4 works well otherwise, although - to solve some recent and accidents-on-quit performance slowdowns - I couldn't reinstall the program unless I added a second user/admin account. Adobe don't know why).

I made this firewall and anti-virus are disabled when the two installation/relocation of this and during the execution of these exports. XPpro is a new facility with all the drivers and all of the updated components. BIOS flashed recently updated.

I feel also a modest success doing this little project HD on a pair of lowish-spec PCs (one is a backup) and rents cameras in part to determine my next update (PC or Mac, FCP - body do not know what the HD camera) for an optimised system HD.

The technique I use is minimal, but acceptable for something Cineform, according to the readme file. I expect that at least the smaller settings would work, but all this crash identically - a few seconds after clicking "start queue"; always before any progress are tabbed/shown.  A notice of accident replaces SOUL, including a window to report the accident to Adobe. I send that and try again. Finally, the system goes up to 100% CPU use after one of those accidents and remains there, despite attempts by Bishop of task or flaps to close the body/SOUL. Each TEA attempt adds another instance of PProHeadless to the list of processes, but the performance is all too crashy from the first through the last attempt.

I tried all the solutions that my research has updated. Suggestions appreciated.

CS4
P4 3 GHz
3.2 GB of ram
GEforce 8800 GT
7200 RPM SATA drives

CineForm works well on the system.  Finally, there was an update I don't have CS4 and SOUL.  Cineform has said to install those and the codec works very well.

Tags: Premiere

Similar Questions

  • Adobe Media Encoder CS4 will not convert video .mov

    Hello

    I have Adobe Media Encoder CS4 installed on my computer and I am trying to convert a .mov video in a format that can be edited on windows movie maker, and when I convert the video converts audio very well, but there is only a black screen. Any ideas as to why this could happen?

    Thanks in advance.

    John Marks

    Right on happy it worked. Now, technically, we could probably use FFmpeg convert these into something that WMM would accept, and you should really be style, then.

    Let's try this: duplicate the BAT file, I sent and replace the name 'mov2avi '. Right-click and select Edit, and then replace the last line with this:

    for %%a in (*.mov) do ffmpeg -i "%%a" -vcodec mjpeg -qscale 1 -acodec pcm_s16le -f avi -y "%%~na".avi
    

    Save, and then run it. This will make a larger file, but you should be able to import this right in WMM. Let me know!

    Yes, just downloaded WMM Live 2011 (or whatever it is called) and the import AVI in full. I would certainly recommend that, instead of convert twice.

  • Where is the DeInterlace in Adobe Media Encoder CS4?

    How is you video deinterlacing using Adobe Media Encoder CS4? In CS3, there are deinterlacing checkbox in the video output tab but there is not one in CS4?

    I use 29.97 FPS 720 x 486 interlace SD images edit and export the final product Flash flv.

    Thank you!

    Joe

    Deinterlacing is now automatically applied if the source and destination are different according to their order of the frames is concerned. In other words:

    • Source--> destination interlaced interlaced = no deinterlacing
    • Progressive source--> progressive destination = no deinterlacing
    • Source interlaced--> progressive destination = automatic deinterlacing

    The order of the fields in the output setting option determines if deinterlacing is applied. Don't forget to check the 'Quality to make Maximum usage' option in the menu. It will take 4 to 5 times more time to make, but with better results.

  • Media Encoder cs4 install issue

    Hello everyone

    I tried to install master collection cs4 in a custom location. and after I finished to install this package, it seems that the media encoder is missing.

    As I tried to uninstall and reinstall again, may not be installed yet, so I was wondering if there is someone who can help me with this?

    Thank you in advance.

    I'm not sure CS4, but I know that a bug that caused the SOUL must be installed to the default location, no matter where you installed after CS5.

  • Adobe Media Encoder CS4?

    Hello,

    I'm trying to export a project from first pro cs4 via media encoder.  I have my project stored on my D drive info, media encoder says that the source of the info is on the C drive.  I can't understand how to change the source of the Media Encoder files, all settings in first pro show, it is stored on drive D.  Any ideas?

    Thanks in advance,

    Eric

    Did you remove an older version of Pr from this computer?  If the answer is "Yes"; read this:

    http://kb2.Adobe.com/CPS/407/kb407106.html

  • Adobe Media Encoder CS4, convert flv mp4 - seriously adrift sync

    (Not sure this is the right forum for it - I don't see a forum for SOUL but it is used in conjunction with Flash)

    I tried to convert a 02:54 mp4 to FLV, and when I am in fact, when you play the resulting flv file it tells me that it is now 03:37. Of course the audio runs at 02:54 so I have half a minute of silence.

    The mp4 was ripped from DVD with the brake hand.

    I tried to convert using a couple of different presets and get the same result. I can't seem to find any sort of option ' keep locked audio video "in SOUL CS4.

    It is perhaps a matter of frame rate? I don't know how to determine the frame rate of the original, but the DVD is a burn of the home video, which produces video - American format. So probably 29.97?

    Help!

    -Bob

    Yes, it seems that Youtube now offers only mp4 download.  I checked at Viddler, and when I upload a video, the download option is flv.

    Sean

  • Windows 7, CS4 Media Encoder of freezing and crashing when you click "Start Queue" - each sequence!

    Windows 7, Media Encoder CS4 crashes when the queue starts with firstsequences. However, open export sequences 'Add sequences' of Media Encoder very well. Have re-installed (without first uninstalling), question is underway. I have several important deadlines approaching soon, please help! Media cache has been cleared (automatically or in the past), computer has been defragmented and scanned for disk errors... I'm absolutely stumped!

    Create a new user account on your computer.  Give administrator privileges.  Launch RP and trying to send a sequence to the SOUL.  It work?  If so, the trash your preferences of Pr in your user account.

    In addition, if you do not use your account as an administrator, you should.  At the very least, set the Premiere Pro executable file to run as administrator.

    Jeff

  • Conversion of image sequence Cineon LOG in Apple ProRes 4444 XQ in Media Encoder CS6

    Hello

    I have a sequence of images Cineon LOG I want to convert to Apple ProRes 4444 XQ, but I'm not sure of the procedure.

    I use Adobe Media Encoder CS6 on a Macbook Pro OS 10.11.2 2012.

    Could you please tell me how to on this subject?

    Also, I find that I don't have the ProRes 4444 XQ Preset codec in Media Encoder... Can I download it somewhere?

    Thank you

    Tiya


    The problem is resolved. Here's how:

    I bought ' Glue Tools Cineon / DPX Toolkit for Mac OS X and used it with Apple Compressor 4 on my Macbook Pro (2012) running El Capitan.

    I was able to convert Log Cineon sequences of images in ProRes 4444 XQ QuickTime movies.

    Some things to note:

    • After downloading the Toolkit, you must activate it from the system preferences panel and make sure that you select the correct Conversion settings in the Cineon / DPX icon (bottom of the system preferences panel).
    • Glue Tools also have a trial / demo for you to try Mode.
    • Currently, glue tools Cineon/DPX Toolkit (4.1.2936) supports only compressor 4, but can add features for the Media Encoder and other tools in the future.
    • Use "Import a file" compressor 4 and select the first file of the Cineon or DPX image sequence when you try to get the glue tools to read them. Do not use 'Import Image Sequence'.
    • Once you have written the ProRes 4444 XQ, you may still need to correct color, but Glue Tools has excellent support.

    Tiya

  • Media Encoder CC2014.2 crash on windows when you try to export if quicktime is installed

    Hello

    I am trying to export .mov files (created on random Mac computers in very high resolution) to reduce the size of the file and have the same output format. (possibly 1080 p H.264-> .mp4)

    I installed Media Encoder cc2014.2 on my pc (win7 64 bit, french).

    When I tested first of all, that the audio was exported. But I soon realized I did not have the right codec installed on my PC.

    (I did not read the original video file, played the audio only).

    Then, like a good boy, I have installed Quicktime from Apple (7.76.80.95)

    With QuickTime Player on my PC, I could read the original video file. (with quicktime player)

    So I opened Media Encoder again, and this time preview I can see the video with sound. But as soon as I start coding (the small green arrow) Adobe Media Encoder crash.

    I tried several output format, it is still down right when I start the file export.

    I uninstalled Quicktime and media encoder works again... but cannot export my original (.mov) with video files, only the sound.

    I tried a third-party codec (K-Lite), I can see the video + sound on my pc, but Media Encoder is always blind, without video, only the sound.

    Is there a way to add codec to Media encoder without installing Quicktime?

    Or a way to make the Media Encoder to work on my PC when Quicktime is installed?

    BTW, I'm sorry if my text is a little confusing, I'm french speaking

    Thank you in advance!

    Hi Daniel,.
    Please check the first solution in this document with regard to the reduction of the hearts of processors available for QuickTime: https://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-warning-or.html

    Thank you

    Kevin

  • How can I remove duplicate of Media Encoder Presets?

    I imported accidentally several presets for Apple ProRes. Now, I have versions in each version of ProRes double in Media Encoder.  How can I remove them?  The "delete" button (the minus sign) will not even turn on (it remains greyed out).

    Remove them manually in the folder Presets of the SOUL.

    What version of the SOUL and the operating system?

    where are stored the predefined settings in Adobe Media Encoder CS4? : Adobe After Effects

  • The installed Adobe Media Encoder product has not been activated.

    My Adobe Media Encoder CS4 worked perfectly.

    I exported even a video one morning and afternoon, he refused and gave me the following message:

    "Thank you for using Adobe Media Encoder CS4.". The installed Adobe Media Encoder product has not been activated.

    Please launch and activate this Adobe product before continuing to use Media Encoder"

    I reinstalled a couple of times, but nothing has changed.

    I uninstalled and installed CS5, it launched once and then gave me the same message all over again.

    I even tried to install it on another computer and it gives me the same result.

    I have worked on this video more a month, and I can not export it.

    Can anyone help? I have a deadline to meet

    Thank you very much

    Go to:

    C:\Program Files\Adobe\Adobe Media encode CS6

    remove the amtlib.dll

    Reach:

    C:\Program Files\Adobe\Adobe Premiere Pro CS6

    amtlib.dll copy from there to:

    C:\Program Files\Adobe\Adobe Media encode CS6

    If you are using 32-bit versions or earlier version CS6 then choose the correct folders for your case.

  • Adobe Media Encoder to Premiere Pro CS4 stops working on the same frame every time...

    Currently, I have Adobe Premiere Pro CS4 and have never had these problems before export. My calendar is less than 3 minutes long, but it deals with several large files. He made perfectly and it plays perfectly in the timeline. When I try to export using Media Encoder, however, it freezes at the same frame every time (which is actually a few seconds in!) then exit breaks down, while I force. I tried to export as many different codecs and the problem persists... same frame. I tried to create a new project from scratch and whisk a few titles and export that to see if it's just export anything. The new project exported very well, however, which I suppose is good news. But yes, my work on this project is very important for me and I reallllly want to export it. Help, please!

    What are the details of the alleged audio file?

  • Renderer AE CS4 / Adobe Media Encoder will not create a container for h.264 blu - ray

    That is the problem.

    First of all, I tried to make a model using the inside the AE render engine using the blu - ray h.264 preset.

    It was supposed to create 1 file, but I found myself with 3: track audio, video and a file with the extension .xmpses.

    I then decided to make in .mov lossless, which works fine, but 03:40 minutes occupies more than 8 GB, which is obviously unacceptable.

    After that, I put the .mov file in Media Encoder to try h.264 blu - ray there.

    Absolutely the same *.

    I use the Mac in AE CS4 version.

    Here is the screenshot of the original .mov file and the result. As you can see, he refuses to make a container. This is absolutely unacceptable

    Screen shot 2009-09-22 at 10.53.13 PM.png

    It raises another question: what settings should I encode the layout in 720 p resolution without taking up a lot of space?

    Well, it depends on if you need a master of production (something for broadcasting, for example, or to use as a source for the other tasks of coding), or if you want a version for distribution. If this is the first, there is nothing wrong with "plenty of room" - A Quicktime file with a PNG or Animation codec is a good idea, but it will take a lot of space. If it is the latter, H264 is perfect, but there is no built-in preset to take 720 material on the web.

    You could do this:

    * Choose the generic H264. You will see that it will give an error if you try to make, since the default setting uses a H264/level profile allowing you to use HD resolutions.

    * In the H264 video options, set the menu 'Profile' to 'Hand' and 'Level' 4.0. That will keep compatible for Quicktime and Flash player, while allowing larger heights and higher rates.

    * If you Webcast addressing the value flow target to 5-8 Mbps and Maximum flow at 9-10 Mbps. It's a little more that Apple uses to 720 p on the Apple TV content, for example.

    The screening of origin H264 will tell you in the comment field to expand to 640 x 480 output Module. It is useless, since you are using a profile/level combination that allows higher heights.

  • ROSS XPression Video Codec doesn't show is not in the drop-down list Adobe Media Encoder Video Codec

    I installed the ROSS XPression video Codec 5.7 on my computer, but Adobe Media Encoder does not see this codec in its list of video Codec available. Any suggestions on how to get this to appear in my video Codec codec pull down?

    Dave,

    Send me an email ([email protected]) with your version of XPression and I'll send you a link to the XPression Video Codec... In addition, you are on the Ross Video forums (community video Ross|) Homepage) for XPression? This is a place to share info and questions about all things Ross Video and XPression. Combined with this forum for Adobe, and I think you'll have a powerful set of user communities to look on...

    Patrick

  • Media Encoder CC blocks looks like 3 loading

    Whenever I load Media Encoder it blocks when "loading Looks3_AE10.plugin. I have no idea where to start to try to solve this problem. I just formatted my drive and I'm trying reinsalling and set everything up. So I just got all my stuff reinstalled and updated and was going to test something out in Media Encoder and I get the same question every time. I tried the update of the OS, restart, making sure that everything is up to date and nothing helped.

    Crash report:

    Process: Adobe Media Encoder CC [380]

    Path: / Applications/Adobe Media Encoder CC/Adobe Media Encoder Media CC.app/Contents/MacOS/Adobe encode CC

    ID: com.adobe.ame.application

    Version: 7.2.0.43 (7.2.0)

    Code type: X 86-64 (Native)

    Parent process: launchd [143]

    User ID: 501

    Date/time: 2014-02-05 11:39:48.893-0600

    OS version: Mac OS X 10.8.5 (12F45)

    Report Version: 10

    Interval since last report: 48162 sec

    Crashes since last report: 4

    Per-App interval since last report: s 74

    Per-App crashes since last report: 4

    Anonymous UUID: 244D09B4-BE79-9EB3-AE75-A679C3AA1A7A

    Crashed thread: 0 dispatch queue: com.apple.main - wire

    Exception type: EXC_CRASH (SIGABRT)

    Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

    Request for clarification:

    terminate called throwing an exception

    Abort() called

    Thread 0 crashed: Dispatch queue: com.apple.main - wire

    0 libsystem_kernel.dylib 0x00007fff90521212 __pthread_kill + 10

    1 libsystem_c.dylib 0x00007fff96fd5b24 pthread_kill + 90

    2 libsystem_c.dylib 0x00007fff97019f61 demolition + 143

    3 libc ++ abi.dylib 0x00007fff9321c9eb abort_message + 257

    4 libc ++ abi.dylib 0x00007fff9321a39a default_terminate() + 28

    libobjc 5. A.dylib 0x00007fff968cd887 _objc_terminate() + 111

    6 libc ++ abi.dylib 0x00007fff9321a3c9 safe_handler_caller (void (*) ()) + 8

    7 libc ++ abi.dylib 0x00007fff9321a424 std::terminate() + 16

    8 libc ++ abi.dylib 0x00007fff9321b58b __cxa_throw + 111

    com.Adobe.dvacore.framework 9 0x000000010022814d dvacore::filesupport::DirHelper::Create() + 813

    10 com.adobe.AMEAppFoundation.framework 0x0000000104f285e9 AME::foundation:AppUtils:GetUserPresetDir (bool) + 425

    11 com.adobe.Batch.framework 0x0000000105c0a842 AMEBatch + 2194 initialize()

    12 com.adobe.ame.application 0x00000001000273cb AME::app:AMEAppInitializer: + 811

    13 com.adobe.ame.application 0x000000010000ad6a AME::app:AMEApp:InitApplication(exo::app::AppInitArgs&) + 2426

    14 com.adobe.exo.framework 0x000000010513e77a exo::app:AppBase:Initialize(exo::app::AppInitArgs&) + 1066

    15 com.adobe.ame.application 0x00000001000141a8 AME::RunTheApp (exo::app:AppInitArgs, & std::vector < std::basic_string < unsignedShort, std::char_traits < unsigned short > dvacore::utility:SmallBlockAllocator:STLAllocator < unsigned short > >, std::allocator < std::basic_string < unsignedShort, std::char_traits < unsigned short > dvacore::utility:SmallBlockAllocator:STLAllocator < unsigned short > > > > &) + 1576

    16 com.adobe.ame.application 0x0000000100056a38 main + 424

    17 com.adobe.ame.application 0x0000000100003f74 start + 52

    Thread 1: dispatch queue: com.apple.libdispatch - Manager

    0 libsystem_kernel.dylib 0x00007fff90521d16 kevent + 10

    1 libdispatch.dylib 0x00007fff9564edea _dispatch_mgr_invoke + 883

    2 libdispatch.dylib 0x00007fff9564e9ee _dispatch_mgr_thread + 54

    Please try to change the permission for the preference folder.  This has contributed to some users solve their crash.  Please access /Users//Library/Preferences.  Then choose the information for the "Adobe" folder there and change the permissions.  You have to add yourself and give permission to "read/write".

Maybe you are looking for

  • Some basic questions please about iCloud photo library

    I am today store all my photos locally in my iOS and OSX devices. In addition, I use time machine and cloud CrashPlan backup. Recommend using iCloud library instead of my present meanneging photo? IN the affirmative. When turning on photo library fro

  • Using a standard vi in labview 2011 to print on a printer wireless?

    Is it possible using labview vi 2011 to print a barcode on a wireless printer?

  • Ports under Device Manager is not available

    I have an application that requires frequent updates of the port "com."  Usually I go in Control Panel-> system-> hardware-> device-> Ports (COM & LPT) Manager to find out which port is used for the connection.  Don't know how but my Ports (COM & LPT

  • Sentinal HARD drive

    WIN SP SP3 Is this software snakeoil - suddenly jumped on the screen while wifw surf on a news site. Can't get rid of him - says there is no space on the C: drive but more than 50 percent showing as free.  Wants to do a defrag if I pay. I tried Disk

  • Persistent [store and String]

    I am fairly new to the BlackBerry development but have a vast experiece in c# so I understand the syntax, but I'm having a hard time getting an array of String to save in the persistent store. Here's a piece of my constructor code: pObjet = Persisten