Circle cursor starts spinning, 25 to 80% but CPU usage no program running in windows 7

Similar Questions

• zcfgsvc.exe running after start and 80 to 90% of CPU usage

  I have a Toshiba Satellite runnig XP home uptodate all - it is slow - like zcfgsvc.exe takes 80 to 100% of cycles cpu, I can finish it in process Explorer, but if I disable it at startup until my without wire does not connect course, anyone has an idea why this forum works after the start, and why it would take that much CPU cycles

  Thanks to two of your answers.  I ran Malwearbytes nothing found, have not found anything this either with intel active in the machine, well keep looking.

  Thanks again

  Maybe a little clarification is required.

  The wireless adapter should be "managed" to connect to wireless networks.

  The manufacturer of the chip - in your case Intel - provided a utility to do this.  zcfgsvc.exe belongs to who and why stop using the Task Manager causes your wireless adapter stop working.

  ALSO Microsoft provides a utility to manage wireless cards and include it in Windows XP.  It's called Wireless Zero Configuration or WZC and there are various files that compose, including wzcsvc.dll.

  Although there must be an active utility to manage the wireless card, it can only be one active utility at the same time.  Thus, most of the utilities provided by the manufacturers have an option, somewhere in their menu 'Préférences' or 'Settings' to turn off in favor of Windows WZC.  I do not use Intel PRO/Set, so I don't know exactly where he is, but if you right-click on the icon of PRO/Set in the Notification System (next to the time display) area you should see a way to get into the preferences of the utility.

  As Windows WZC is concerned, open network connections (start > run > ncpa.cpl > OK), right-click on the icon for your wireless adapter and select Properties.  Click the "Wireless networks" tab and at the top you will see a checkbox "Use Windows to configure my wireless network."

  MVP Jack has an account here: http://www.ezlan.net/wzc.html

• a windows 7 starter edition on the old drive that I upgraded to Home Premium, got windows 7 starter again on new drive but my upgrade key keeps failing

  You can use key upgrade once, or what I need to get the latest updates to work

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Any new application does not open, circle of mouse cursor keeps spinning

  Number description: -.
  some time user can't open\run\ right click on any application except running applications also does not work
  the user can open multiple files by running the app, but not able to open a new application (such as the command line, the the Task Manager, MS Word)
  User facing this problem up to 8 - 12 times per day

  Error: -.
  do not get an error after you have started the question, one circle cursor mouse keeps spinning on screen

  Action taken: -.
  Reinstalled MS Antivirus, access connection,
  I tried sfc/scannow, chkdsk, virus scan
  No event log, antivirus connects generating
  Change virtual memory,
  also tried to re-imaging with Windows 7 Professional SP1 system

  System configuration: -.
  Lenovo X 230 type 2330,
  8 GB RAM, 300 GB HARD DRIVE
  BIOS date: April 22, 2014
  Windows 7 Professional with two drives
  MS Office 2010 Std
  Lenovo Fingerprint Software for authentication

  Installed applications as below

  Name                                                              Version
  Windows Media Player Firefox Plugin 1.0.0.8
  Lenovo Patch utility 64-bit 1.4.0.4
  Patch utility Lenovo 1.4.0.4
  For Office system Compatibility Pack 2007 12.0.6514.5001
  Microsoft Office PowerPoint Viewer 2007 (English) 12.0.4518.1014
  Microsoft Office OneNote MUI (English) 2010 14.0.4763.1000
  Microsoft Office Standard 2010 14.0.4763.1000
  Office Microsoft metadata Shared install MUI (English) 2010 14.0.4763.1000
  Microsoft Office Excel MUI (English) 2010 14.0.4763.1000
  Microsoft Office Shared MUI of metadata to install 64-bit (English) 2010 14.0.4763.1000
  Microsoft Office PowerPoint MUI (English) 2010 14.0.4763.1000
  Microsoft Office Publisher MUI (English) 2010 14.0.4763.1000
  Microsoft Office Outlook MUI (English) 2010 14.0.4763.1000
  Microsoft Office Office 64-bit components 2010 14.0.4763.1000
  Microsoft Office Shared MUI 64-bit (English) 2010 14.0.4763.1000
  Microsoft Office Word MUI (English) 2010 14.0.4763.1000
  Microsoft Office Proofing (English) 2010 14.0.4763.1000
  Microsoft Office Shared MUI (English) 2010 14.0.4763.1000
  Microsoft Office Proof (English) 2010 14.0.4763.1000
  Microsoft Office Proof (Spanish) 2010 14.0.4763.1000
  Microsoft Office Proof (French) 2010 14.0.4763.1000
  ThinkVantage Active Protection System 1.78.0.09
  Encryption of Symantec Desktop 10.3.0.9307
  Adobe Reader XI (11.0.08) 11.0.08
  Intel (r) PRO/Wireless Driver 16.01.3000.0512
  IBM NOTES 9                                                               9.0.1
  Microsoft Office Excel Viewer 2003 11.0.6412.0
  ThinkVantage Fingerprint Software 5.9.9.7282
  Before Agent 5.50.519
  Symantec Endpoint Protection 12.1.4013.4013
  Microsoft .NET Framework 4 Client Profile 4.0.30319
  Intel® PROSet/Wireless WiFi software 16.01.3000.0254
  MANDIANT Intelligent Agent 2.2.1504 response
  ThinkPad Bluetooth with Enhanced Data rate Software 6.5.1.2700

  Hello Patricia,

  Please keep us updated on the status of the issue.

  I appreciate your time and patience.

  I suggest you start Disk Defragmenter and check the issue.

  Disk Defragmenter rearranges data fragmented for your drives and readers can work more efficiently.

  Refer to this article:
  Ways to improve your computer's performance
  http://Windows.Microsoft.com/en-us/Windows/improve-performance-defragmenting-hard-disk#1TC=Windows-7

  I hope this helps.

  Thank you

• At the office, InDesign works very well. At home, it totally crashes and all I get is the reel spinning death everytime I go near "file." Is there a solution? I can open a previous file or start a new popup tutorial, but if I try to approach

  At the office, InDesign works very well. At home, it totally crashes and all I get is the reel spinning death everytime I go near "file." Is there a solution? I can open a previous file or start a new popup tutorial, but if I try to get close to 'File' to place an image, he out craps. Is there a solution?

  reset your preferences -: https://forums.adobe.com/thread/526990

• Portege Z30-A-191 - the cursor starts to move by itself

  Hello. I have a problem with the touchpad: sometimes (but quite often) the cursor starts to move by itself in a diagonal direction. Finally he stops, moving independently, but the problem can resume later. When the problem occurs, the notebook computer becomes unusable.

  I ask a technician here at my work, focus on the problem, and he said that the drivers are up to date.

  Is there any solution for this?

  Can you please do a little test. Remove the driver for the touchpad from the system and check its operation with "standard driver. Please send us comments.

• CD/DVD drive starts spinning when the Satellite X 305 - Q701 is disabled

  Hello

  I just bought X 305-Q701. Everything works fine, but the only thing bothering me.

  During his tours, DVDROM periodically starts spinning and some noise and I can eject DVD anytime, as I said the laptop is off.
  It doesn't seem strange or its ok?

  Thank you

  Resolved, brought to BestBuy and took another

• Firefox does not start because he says that it's another instance that runs in the background, but I checked and it is not a!

  Firefox does not start because he says that it's another instance that runs in the background, but I checked and it is not a! I have Linux Fedora 15 and I'm not the root. I spoke to the Manager and he said I should delete a file in the folder where firefox is installed and which can solve the problem. Can you help me?

  Thanks, Marius
  

  Upgrade your browser Firefox 8 and check

  • getfirefox.com

• I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  Sorry, but you can't activate an iPhone without a SIM card installed. It is simply not possible to do.

• I can't start my (Internet Backgammon) game, but it worked great until I upgraded my norton anti virus

  original title: games

  I can't start my (Internet Backgammon) game, but it worked great until I upgraded my norton anti virus can you help me get started?

  Hello

  Check if you have the game of Backgammon authorized by the Norton Firewall.

  The game of Backgammon Internet is bckgzm.exe.

  Check with Norton Support and in their forums.

  Norton - Support
  http://us.Norton.com/support/

  Norton - Forums
  http://community.Norton.com/Norton/?category.ID=NIS

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I try to start my computer, it does not load anything. The backlog, but the rest of it runs bad and slow. I can't open any programs that either, and my pointer always told it to load.

  Original title: Please HELP

  When I try to start my computer, it does not load anything. The backlog, but the rest of it runs bad and slow. I can't open any programs that either, and my pointer always told it to load. Safe mode works, but I just don't know what to do. Help, please

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Since it works fine in safe mode, I suggest you to try to perform the clean boot to safe mode and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Also, try to run the safe mode System File Checker and check if it helps:
  http://support.Microsoft.com/kb/929833

  Method 3:

  Be sure to run a full scan with your antivirus software.

  http://www.Microsoft.com/security/default.aspx

  It will be useful.

• Start/task bar freezes, but can still work on all open windows? : S

  Hello and thank you if you took the time to read this.

  I'm on Vista x 64

  I'll start by when I turn on my pc.  (and an example of what is happening)

  Turn on > enter password > windows start > if I leave my computer for a few moments without start all programs, the start bar will freeze after about 5 minutes.

  I am then unable to open all programs, if I try Ctrl + Alt + Delete I try to start the Task Manager, but it's too frozen and I can't terminate any process.

  The only thing I can do is Ctrl + Alt + Del again and shut down my computer.

  (is where it gets more weird)

  If I start my pc > fill in password > open some programs quickly before the start bar freezes (because he ends up by themselves) then the start bar freezes after a short period (1 min) (for example) Firefox/Chrome open, Photoshop, E-mail, etc. open, I am able to use all these programs, unless I have close or minimize the window for them , making it impossible to get again (even if they are still running as a process)

  If I try to Alt + Tab the real Vista Alt + animation tab that opens in the middle of the screen sits there frozen too impossible to close or change the program.

  To add to the strangeness >

  I then press Ctrl + Alt + Delete and click CLOSE in the lower right, when I do this the ' the following documents are still open you want to save before windows shuts etc etc etc...'   So I click Cancel instead of "Force Shut down" and everything will come back to working perfectly!

  I'm confused and have no idea of what I should...

  I'm guessing a repair would be useful, but there may be something im missing

  Thank you for reading if you have any help much appreciated!

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.

  After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.  Try to understand the problem.  Can I try to reinstall? Problem is on flashing screen cannot do anything.

  Original title: Windows 10

  Hello

  Thanks for posting in the Microsoft Community.

  (1) do the Windows 10 installation process is complete?

  (2) you are able to view the Windows 10 desktop?

  You can check the help below article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/troubleshoot-screen-flickering

  If the problem persists, you can reinstall Windows 10 by downloading an ISO image file to create installation media.

  To download an ISO image see the link below:

  https://www.Microsoft.com/en-us/software-download/Windows10

  To create an Installation media check out the link below.

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

  It will be useful. Please get back to us with the State of the question.

  Thank you.

• If I work for an hour or more first the cursor starts to behave correctly and then the program gets stucked

  my pc is stuck. I doubt that the fan provided within the system does not work. The problem is if I work for an hour or more first the cursor starts to behave correctly and then the program gets stucked and the pc needs a forced closure. And where the driver is placed at the bottom is very hot.

  Original title: Stucks

  Hello

  In addition to becoming the fan if it does not, if it is a desktop computer, clean the inside with a can of compressed air.

  If it's a laptop, check the vents for hair, dust, etc. and do not use a laptop when it is based on material surfaces: bedspreads, blankets, etc.

  If the problem persists, if this is a laptop (as you say only pc, no office or laptop), take it to a local computer and reliable repair shop and get them to open and clean the dust inside...

  Here is an interesting discussion about the reasons of your problem (IF your laptop):

  http://PC-trickandsolution.blogspot.com.au/2011/07/fix-laptop-overheating-shutdown-problem.html

  NB: > however 9 out of 10 cases of overheating are caused by obstruction of the air flow.

  See you soon.

• When to start the windows 7 no sound is detected, but after the closure of the session window detects sound.

  When to start the windows 7 no sound is detected, but after the closure of the session window detects sound.

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  1. don't you make changes to the computer before the show?
  2. are you referring to the startup sound?
  3. What is the brand and model of the computer?

  I suggest you try the steps from the following link:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems