circle LED

Similar Questions

• Sansa Fuze V2 problems wheel [HELP PLEASE]

  So, I recently got my Sansa Fuze.  I was very happy with it.  Initially, I had some problems, but I sucked in and resolved.  Although now, the wheel of my sansa fuze is what I believe to be, die.  The drive itself is not even a month, and I do not use it pretty close.  The LED around the wheel is really go wacko.  The whole circle LED flashes, and the lower right corner of the wheel would not light up unless I actually press on this subject.  I had this problem before, but I found that the sides were loose and that I just pressed it back, which made the point.  2 weeks after it happened.  I don't know what is happening.  I have searched, but nothing was very useful for me.  Is there a way to fix this?  In addition, how would I know if my drive is still under warranty?

  You say you have "recently." How recently? It is probably still under warranty (1 year in the United States). This looks like something that will do better or that you can fix yourself. It's a hardware problem; call that SanDisk technical support and they'll most likely replace them for you.

• How to run 4 LED in a circle

  Hello guys,.

  I have a situation that uses a clock (called every 5 seconds).  When a timer is called, there are 4 LEDS which are in action. I have travel blick in a circluar for the next 5 seconds, and then the control is passed to another series of LED that performs the same operation.

  My question is, how can make a set of 4 leds blink and close way circluar (ONE IE 1, 2-ON-1 FARM, 3-ON-2 OFF, 4-on-3, Ontario - 4 OFF 1 OFF and so on). in such a way that they are visible to the user.

  Thanks and greetings

  Roussel

  This looks like a good application for arrays of LED control; You can find an example distributed with CVI, called ledctrlarray, or examples of application here or here

  Your existing timer would trigger, which is to launch a second "clock LED" operating at 5 / 4 = 1.25 s (or faster), so that each 1.25 s a LED is on and the last LED is off. You will also need a counter so that after one (or more) full circles the second timer and so the flashing is off again

• I want to install and access on my second computer to the creative cloud, but all options led me in circles. I am a paying user and I need help, I want to install and access on my second computer to the creative cloud but all the options that brings me

  I tried to open creative cloud on my new mac, but after hours and hours of being returned to the circles, I'm officially sick. Is there a simplified way of the opening to the top of your creative cloud custom on a second computer?

  It works no different that on your first system – app install CC, log in, install the programs. If you have specific questions, you need to better explain and provide the necessary technical information such as specification of the system.

  Mylenium

• Led plugin causes my pc to crash constantly. What can I do to stop this?

  One out of three times my pc does not load at startup. The small circle who shows me something, but then absolutely nothing happens, the screen goes black and the keyboard does not work. Finally (after 5 minutes or more) will pop up to tell me that led plugin still works. On a few occasions another window pop up and tell me, that the windows firewall and my security software are disabled. So in summary: I don't know what this record is all about, but it does not seem to cause damage on my computer. Where can I find it and how do I turn it off? Thanks for your help :-)

  1. Open your Firefox browser and type Subject: config in the address bar
  2. Enter Search and filter.
  3. Check all channels as 'INTERMEDIARY' - and rightclick-reset content...

  Try to use the extension SearchReset reset preferences to default values.

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  To learn more

  • http://malwaretips.com/blogs/remove-conduit-apps-search-and-toolbar/
  • http://www.flocked.NET/topic/computing/item/485-how-to-remove-conduit-search-from-Firefox

• Satellite A300-1NO - webcam does not work, but the LED lights

  Hello!

  I have a laptop Satellite A300-1NO, with Win 7 installed. My problem is that my webcam does not work always, when I want to use it. Sometimes, it works perfectly in Skype, WLM etc... but sometimes I see a white or a black screen with a 'loading circle' in there. Blue is the LED light, I can see it in Device Manager too, but there is no picture, just 'loading '. I tried to uninstall the driver and then reinstall it, I installed the new "camera Assistant for Toshiba", without success.

  Is there any solution for this?

  > Is there any solution for this?
  I put t think there is solution for this. If I understand you right there is a problem with software pre-installed. It is not easy to say why this is happening.

  I have Satellite A300 too and use it with Win7 32 bit. Webcam works fine all the time.

  One more thing: have you noticed this problem in the first moments after installing Win7 or later?
  Have you installed something that may be the reason for this?

• BACKFLIP: Where is... Led notification and Alerts notification for Facebook/MySpace?

  I have a few questions. My first question is, I have a lot of apps that say they can warn my by LED light. I put it to inform me, but when I get a text or message twitter the led lights. The circle of the speaker a light? If so is there a setting I have to go to?

  My second question is, are there not facebook and Myspace apps which will inform you actually when you receive something. (message, friend request). I have not a single notification since Ive had the apps.

  Any help will be greatly appreciated.

  1. the phone has not built in LED indicator. The circle you are referring is the light sensor. It is the sensor that helps auto adjusts the screen backlight according to surrounding it.

  2. for FB and Myspace notifications, you have two options: a) check your settings online within the FB and Myspace on PC site and allow notifications no longer pushed to your email or text or b) download the official FB and Myspace application on the market. These applications have built in notifications. I suggest you go with option A as option B consumes more battery. It is preferable that you play with the first two methods to find which suits you best.

• Yoga 2 Tablet load LED can be disabled?

  I load my tablet on my bedside table and white button flashing LED PWR lights up the bedroom.

  Resolved... with a piece of black tape cut in a circle

• continuous sequence of control led

  HiHi,

  I have a problem I'm supposed to control the LED of labview. Total control of 4 LEDS using NI 9263 as an interface.

  So far, I managed only to control using 4 boolean. I need to do as one of the led light both upward and it is continuous in a circle.

  for all four leds using the DAQ Assistant total of 4 channels. So, how can I make it work? Is it possible if I use a boolean to control all the

  4 channels?

  Hello

  Something like the socket maybe?

• I can't connect my computer at home it has windows xp professional on... just go round in a circle with 30 seconds of countdown to try to open a session.

  I can't connect my computer at home it has windows xp professional on... just go round in a circle with 30 seconds of countdown to try to log on... I tried options menu that is to say; go to the last known working etc etc... but not good. Problem came when the wife has removed some material... not been able to get a blue screen connect etc. Since HELP!

  original title: help!

  If you have no Windows CD, you can not do a repair installation.

  If you have no Windows CD, the message from the moderator of the Forum Nicholas_W will not help you either.

  If the disk verification fails, there is no sense to try a repair installation because the file system was obviously some problems that must be fixed first (at least that is what I think).

  Wouldn't you want some ideas that actually work?

  The error:

  STOP: 0 X 00000024 0 X 00190203 0X82F42108, 0XC0000102, 0X00000000

  indicates a problem with your NTFS file system.  You can usually solve this by running chkdsk/r from the XP Recovery Console.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• dv9700 won't turn on no - 3 flashes battery LED

  We sent an e-mail to HP support on this issue, but I hope that someone here might have an idea as well.

  My HP Pavilion dv9700 laptop died suddenly while I was using it, and I couldn't get to on for power. I have tried everything I can think to bring back to life. Any ideas what could be the cause of the problem?

  With the battery in place, if the laptop is connected to AC power, press the power button causes the battery (Flash) LED flashes 3 times and then more nothing. By pressing one of the QuickPlay buttons (which would normally start it) brings the same result of 3 flashes.

  If the laptop is connected to an electrical outlet, the circle on the power connector will light. He is the only other answer machine watch to any action. I tried a Hard Reset (AC and battery, then holding the button for 30 seconds), unfortunately nothing has changed. I have also reinstalled the hard drives and memory modules and tried to start with each modules only memory, in turn. No change.

  Think the problem could be a faulty power adapter (as reported by another owner of dv9700 with this problem), I bought a brand new "HP NOTEBOOK 90W ADAPTER INTELLIGENT" (p/n #ABA KG298AA) and I tried to use it to power the laptop. No change, still the same answer 3 blinks when I try to turn it on.

  When I remove the battery completely and try to turn on the laptop (connected to an electrical outlet), nothing happens at all - not even the answer 3 the battery LED flashes. But, given the question led * IS * the battery LED, it doesn't seem like I can draw many conclusions.

  Any suggestions? Also has anyone seen this problem caused by something other than a bad diet? Any thoughts at all would be greatly appreciated, I'm in a real traffic jam not being able to use this machine!

  My dv9700 details are:
  p/n: KL086AV
  s/n:

  Thanks for your attention!

  Message edited by Wendy on 11/19/2009 06:48

  I thought others might be interested in the way things turned out with this laptop. HP has kindly get back to us on the issue, but since the unit is not under warranty it would have been a $400 repair to fix.

  Then we took at a local store (here in New York), which by means of an assessment of $40 were able to determine that the problem was with the circuit AC - the portable _would_ was ran out of a charged battery, but for some reason any was not able to charge the battery, or run out of power. Of course, since we have no way of charging our battery in the laptop, this information has a lot of help for us. They offered to fix it by replacing the entire motherboard, which would have cost nearly $300. We decided not to go in that direction.

  My colleague then find an eBay listing for specialists motherboard repair services in Florida, down in Miami, Florida. They announced the service of repair on any motherboard sent to them, at very reasonable prices. So, with some trepidation, we removed the motherboard of the device, packaged safely upward and delivered it to Miami. (The store was willing to take the portable set, but they charge a fee if they have to make the extraction of the motherboard & resettlement themselves.)

  Well, I can't say enough good things about Florida Motherboard service specialists! They had returned mother surprisingly fast - I think it was out of our hands for a little over a week, and I have it shipped via UPS ground down! - and for a very reasonable price (less), there we returned in perfect working order. After reassembling, the system started right and worked well since. I'm happy beyond that, to say the least and you want to send them another customer dv9720 - also completely non functional - tomorrow.

  I do not work for specialists of motherboard in Florida, nor do that I have somehow to share my experience. I'm just a very satisfied customer. There is certainly a risk with their use, but if other repair options are too expensive justify, IMHO it's at least useful to consider their service. He can be reached at the [email protected].

• Notification for the white Passport Passport blackBerry LED light

  The Passport white led notification light or not.

  Going to replace my black passport with a white.

  Saw a few video unboxing of the white pass and nowhere I see notification led flashing light.

  Attached the hi res pic of RIM blogs where led black Passport circle of notification may be given a centimeter far to the left of the lens of the camera.

  Can't say the same about the white pass in the background.

  Can someone please clarify...

  No, but I see what looks like the LED. In any case, again, I don't see why he wouldn't have it.

• Circular LED animations

  Hello world

  I want to create an animation circular LED like in this video - in particular, like the one from 01:12. I already understood how to create realistic looking LEDs in a circular arrangement, but I still have a few problems with animations. So far, I use a radial transition wipe but as each of the LEDs must be able to move the color which does not seem a good solution. I know how to create this animation using only a stroke, but that doesn't help me much...

  Can you maybe give me some advice or appoint effects that could help me?

  Thanks in advance!

  Are you new to AE? You have no experience creating layers animation effects? It is can easily be duplicated by using shape layers and light effects. Shape layers have additional animators, that you can apply as repeaters. The glow can be performed with only a couple of duplicates of the shape layer, a fast blur and the screen blend mode or add.

  Here's a quick step by step.

  1. Press the Q button until you get the Ellipse tool
  2. Make sure you have the fill set to a color you want and the race is set to your liking
  3. Draw a small circle anywhere in the model
  4. Press the U key to quickly reveal any changes to the properties of the layer
  5. Look for the size of the Ellipse path 1 - set of 25
  6. Search the fill color and set a keyframe
  7. Find 1 Ellipse path > transform > Position and set the X and Y values of 0 and -300
  8. Find the button add just above the blending Mode property in the Modes column and select Repeater
  9. Move to the Repeater and set the Repeater transform > Position at 0,0
  10. Set the Repeater Transform > anchor for 300
  11. The Rep to transform the value [Eater > Rotation about 8º]
  12. Adjust Copies of Repeater and offset of repeater to give you the number of lights you want. Animate the number and the offset to make the lights revolve around the center of the model

  You should get there ring of lights. Now, add something like the glow. Set a keyframe for color, move to the bottom of the timeline and set another keyframe. You are finished. If you want to animate color changes then you can set keyframes. Animate the offset to get the circle of circles to move. That's all there is to it. Now just add your glow effects.

  

• Updated to iOS 10.0.2 then I can't change my photos now, a circle of download appear right in the middle and never download I do not know what?

  After the update to iOS 10.0.2, tried to change my time of sev photos and download circle appear in the middle of the screen and does not download. I tried to restart the photos and restart the phone with no luck at all. How would I fix this?

  Hi jorykamel,

  I understand that your photos are does not load when you tap them in the Photos app, since you upgraded to iOS 10.  You have iCloud library enabled?  Tap Settings > Photos & camera.  If you selected active iCloud photo library and Optimizing iPhone storage , so it can take a long time to access the original photos that are in the cloud.  The speed of your internet or cell connection will affect it as well.

  You are able to access iCloud from your computer?  See images here?  You can download the original images to edit if necessary.  If the problem persists, you may need to disable your iCloud photo library, and then turn it back on to re-establish the connection.

  Get help with your iCloud photo library

  Take care.

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.