Cisco 2911 and web control

Similar Questions

• Cisco 2911 and ASA 5512 remove double NAT

  Greetings,

  I have 2 subnets on Cisco 2911 router

  192.168.3.0/24 and 192.168.1.0/24

  3rd network 192.168.4.0/24 is natting internal interface to the modem for internet access. creating 2 NAT (NAT in router) and NAT in Modem

  I just bought Cisco ASA 5512, no chance I could remove the Cisco 2911 router NAT and set the default gateway for Cisco ASA?

  Yes you are right...

  You must ensure that you get the routed LAN traffioc to hit inside the interface ASA in ASA, you can do PAT/NAT to access...

  Concerning

  Knockaert

• HP Officejet Pro 6830 E3E02A: HP Officejet Pro 6830 scan via web control panel

  Hello, I just bought the printer, and I tried to configure the analysis via the web control panel.

  When I tried to scan, I got the message:

  "You can't use this feature because it has been disabled. For more information, contact your network administrator or the person who set up the printer. »

  Given that I'm the one who created the printer and I am the network administrator in my house, there is not one that I can talk to

  I tried to find permissions in the printer itself, but I couldn't find anything.

  Can you help me configure the scanning to any computer that connects to the control panel (only designed connected to the wifi can do anyway is safe)

  Thanks, Lidor

  Hello

  Please specify what you are looking for to WebScan.

  Here is the procedure to activate Webscan (you are almost there to implement!),

  First, we assume that your printer is installed over the network (whether via a wireless or Ethernet connection)

  1. Go to your printer and to determine the IP address of the printer for example 15.37.213.128
  2. The priner key IP address in your Internet Explorer browser
  3. Go to sweep, there should be an option Webscan. If it says "you cannot use this function...". ", you will need to enable it.
  4. Activation of the Webscan: Click on 'Settings' > 'Security' > 'Administrator settings' (simply 'continue' if there are any warnings about certificates, you may need to click on "Advanced" to continue)
  5. Under 'Settings administrator', it should be a "Webscan' option, be sure to what is"checked"and"Apply"or"Save"your settings.
  6. Go back to perform a scan and you should be able to see the Scan options. Select "Document Source" to be "ADF", PDF "Type of Document' and 'start scanning '! (You can also select "Document Source" to be "JPEG")
  7. Once scanning is complete, right-click and save your file in the destination of your choice.

  Here is a relevant video showing how Webscan is done, you are right in saying Webscan can be used in any OS, the video example uses Chrome for example:

  Scanning from Chromebook

  https://goo.GL/fH4F1R

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• My grandson was playing with the keyboard and all my icons and web pages are now huge. I had this happen before, but I can't remember how to reset it. Any help?

  My grandson was playing with the keyboard and all my icons and web pages are now huge. I had this happen before, but I can't remember how to reset it. Any help? I went through properties and all that it is fine. It has something to do with the keyboard and an F key and control or ALT.

  Hi Sashaxwp,

  To get small icons in your Start menu

  Click Start on the taskbar, and then select Properties from the context menu.
  Ensure that the selected option of Start Menu as ist and click Customize to the right of the Start Menu option.
  This will display the Customize Start Menu dialog box.
  Use the Option Select an icon of Sice to Programms and now select small icons

  To configure your display appearance, wants to get small icons on your desktop

  Right click on an open area of the desktop and select Properties.
  Click the appearance tab.
  Click on 'effects' (in my Version of XP in German), perhaps you will need to click on Advanced.

  In my XP there is a "huge symbols" choice, if you have this choice, remove the hook.

  Good luck and have a nice day!

  Kind regards

  Rainer

• Service error battery Bluetooth connection problem and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device ".

  Original title: Bluetooth connection problem

  I have a bluetooth Jawbone headset which worked fine with my Dell studio 1458 until a month or two ago. I am running windows Home premium 64-bit. Now the device will connect is more to the laptop. I get an error to the stack service and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device"I returned to you can restore point, but the issue is not resolved. All solutions?

  Hi Trainfan1,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Check the drivers and the Bluetooth Support service.

  (a) click Start, type services in start search box and press enter.

  (b) Services for window open find Bluetooth Support Service and double-click it.

  (c) ensure that the service is both the value Automatic for Startup type and started for the State.

  (d) click Start, type Device Manager in the start search box and press enter.

  (e) to search for the Bluetooth device expand it and double click on the driver.

  (f) go to the tab driver and click set to update driver to update the drivers.

  (g) if the problem is still even try to Uninstall and reinstall the drivers in the same tab by clicking on the option Uninstall .

  Method 3: Remove all Bluetooth components and reinstall it from the manufacturer's Web site.

  Install all necessary software required for Bluetooth device work properly.

• The traffic load between the power of Cisco ASA and FireSight Management Center fire

  Hi all

  I have a stupid question to ask.

  Can I know what is the traffic load and the e/s flow between firepower Cisco ASA and FireSight Management Center?

  Currently working on a project, client require such information to adapt to their network. Tried to find in the document from Cisco, but no luck.

  Maybe you all have no idea to provide.

  It varies depending on the number of events reported from the module to the CSP. No event = only health controls and policy changes are exchanged. 10,000 events per second = much more traffic.

  Generally it is not a heavy load, however.

• IPS on the version of cisco 2911 (15.0 (1) M3)

  Hello

  Could someone guide me please? I'm under cisco 2911:

  ********************

  Cisco IOS, C2900 software software (C2900-UNIVERSALK9-M), Version 15.0 M3 (1), REL

  EASY SOFTWARE (fc2)

  IPS license status: not installed

  Current date: October 8, 2011

  Expiry date: not available

  Date of extension: not available

  Loading signatures: not available S0.0

  Signature package: not available S0.0

  Cisco IOS, C2900 software software (C2900-UNIVERSALK9-M), Version 15.0 M3 (1), REL

  EASY SOFTWARE (fc2)

  ******************

  When I run the show ip ips:

  IPS license status: not installed
  Current date: October 8, 2011
  Expiry date: not available
  Date of extension: not available
  Loading signatures: not available S0.0
  Signature package: not available S0.0

  Do I have to buy a license for software only, or should I buy a saparate for IPS module work?  How would the license be about?

  Help

  You can run IOS IPS on the 2911 router, however, you must purchase the license IOS IPS to be able to run the IOS IPS feature. Not sure how the license, it is best if you ask Cisco reseller/partner and they would be able to help others with a price.

• What is the difference between Cisco NAC and ACS?

  I am currently part of a new construction project and my Cisco account manager and sales engineer recommend Cisco NAC for our new MDF. I'm confused because I don't clearly know the difference between a Cisco ACS and the NAC. What is the difference?

  Thank you

  Chris

  Chris,

  The two are completely different, maybe the sales rep could present you with more information and application. Each offers a variety of services tailored to the specific needs. I think that we need to read more in depth on the proceeds of the NAC. NAC seems an excellent solution for authentication authorization but other regulatory compliance.

  When you see ask your representative to sales for more information/demo.

  ACS is more widely use as a central point to access control to network devices routers, an example is for acs accounting management and the authority to order on all devices on the network using acs as RADIUS server. Considering that the NAC is over a central point of safety inspection on earlier systems of access to your network by via LAN or outside, an example of these respected regulatory defined could be inspections could be virus definition checks before getting lan access thus preventing access to the LAN if the system does not have regulatory compliance defined in NAC access is denied. Another example could be the unknown local host connections etc... So, it seems that NAC is a much broader product that provides endpoint security internal, not only the authentication authorization as acs... ACS has been there for a long time, NAC is rather new product.

  NAC

  http://www.Cisco.com/en/us/NetSol/ns466/networking_solutions_package.html

  http://www.Cisco.com/en/us/solutions/collateral/ns340/ns394/ns171/ns466/ns617/net_qanda0900aecd800fdd6f_ns466_Networking_Solutions_Q_and_A.html

  ACS

  http://www.Cisco.com/en/us/products/sw/secursw/ps5338/index.html

  Rgds

  Jorge

• VPN Cisco 2911

  Hello

  I am thinking purchase 2911-SEC/K9 Cisco router.

  IM wondering witch VPN types can I use to participate in the network? I think that I read that IPsec site-to-site is not a problem but im wondering PPTP or something like that. What type of VPN solution customer, I can use. IM thinking on the use of the premium Anyconnect if this is possible with the 2911 router. I also wonder how much the cost for this will be user and connection.

  Best regards Tommy Svensson

  Hi Tommy,.

  With a 2911 and the licensing of security for the IOS, you can use IPsec VPN or SSL VPN (AnyConnect).

  Traditionally IPsec VPNS allow remote clients to connect by using a client software and also helps the Site-to-Site connections other peers (ASAs, IOS devices, third party, etc.).

  SSL VPN now offers over HTTPS, which you don't need to worry about encryption at the network layer (as in IPsec).

  It will be useful.

  Federico.

• Intel R WIDI and Catalyst Control does not

  I have Dell Inspiron 15R SE new 7520 on the first day, when I installed Widi application there is a problem, any update in display driver causes an accident in one of the application object.

  There are updates available from Intel, AMD, and even from Microsoft for display drivers but I can not install updates. I checked the other forums almost every user of dell with this laptop under windows 8 have the same problem.

  Platform = Windows 8

  AMD Radeon HD 7730 M Driver version 8.982.6.0 Date: 01-8-2012 supplier AMD

  HD Graphics 4000 Driver version 8.982.6.0 Date: 01-8-2012 supplier AMD

  Intel(r) centrino (R) N2230 version 15.8.0.5 as of 25-4 - 2013 supplier Intel.

  Intel WIDI Application version 3.5.41.0

  No control of catalyst work, with a message "there is currently no setting...". »

  Its my third Dell laptop, this time I was hoping to buy a piece of high-end, but now I feel sorry for myself.

  Hi Novice_dell,

  I apologise for the inconvenience. The required drivers are updated in the support Web site. Inspiron 7520 works on the switchable graphics technology. Intel and AMD cards work in sync according to the type of application that you are running.  Simple application runs using Intel graphics card, where as a intense process are made by AMD graphics card. So update the driver on the manufacturer's Web site is unable to help.

  I recommend you to uninstall Intel, AMD drivers WiFi and video of the Device Manager. Video drivers are listed under graphics cards and wireless driver is under network adapters.  Delete folder AMD and Catalyst Control Center in programs and features.

  Reboot the system and update the drivers from the link below:

  http://Dell.to/QjjZDA

  Click on the link above, enter the system service tag and click on send, select the operating system from the menu drop down to get the drivers. Install the Intel graphics driver first, reboot the system and then install the AMD driver.

  Response for assistance.

• I use the latest version of firefox, but cannot print all downloads. I tried to use the icon to print the downloaded form and also control P

  I tried using the icon of the downloaded form printing and also control P, but only get a blank page. I even changed my printer, but it did not help. My print menu looks the same, and I have quite everything, print only with downloaded files.

  Hello, it's currently a bug in firefox's built-in pdf viewer that is studied by our developers. in the meantime, you can use a plugin third pdf as Adobe that you can enable in the firefox options > applications -scroll down and set the default action for the portable document (pdf) format.

  How to disable the built-in PDF Viewer and use another Viewer

• Pop - up ads and Web sites, since the load OSX ElCapitain latest

  Given that the last loading system updates, I have constant problems with pop-up ads and Web sites?  Any solution?  OISIN

  Click here and follow the instructions, or if it is not a type of adware is covered by them on the computer, these. If you would rather not remove it manually, you can run rather MalwareBytes for Mac.

  
  

  MalwareBytes simplifies the process of removal of adware, but does not stop it or other malware from entering the computer. It should not be invoked to prevent future incidents; Instead, avoid downloading software from sources other than the Mac App Store or Developer Web sites.

  
  (141817)

• Satellite A200-1VP - Trackpad and the control volume

  Hello

  for the first time posting here so apologies in advance if I posted this topic in the wrong place or have not included all relevant information.

  My question is about a Satellite A200-1VP I bought recently from a friend. Model number PSAE6E-08D02YEN. The laptop has been completely annihilated and installed Windows 7 Ultimate before being redeemed.

  This seems to have brought the track pad and volume control to stop working.
  Are there drivers available that I could try to help to solve this problem?

  Thanks in advance.

  Hello

  I checked on http://www.toshiba.eu/innovation/download_drivers_bios.jsp Toshiba download page, and as I can see it, your machine is fully supported for Win7 32 bit, so you need to do is install all available drivers, tools and utilities.

  What version of operating system are you using (32 or 64 bit)?
  You have installed all the drivers?

• ATI Catalyst Install Manager and Catalyst Control Center help

  I just run the Windows 7 upgrade

  report from the consultant and he said that I have to uninstall the ATI Catalyst Install Manager and Catalyst Control Center and then reinstall after upgrade...

  Could someone direct me to where I could t find these programs for Windows 7

  You should not do this. Just proceed with the upgrade installation.
  On my Satellite, I got the same message, but I just kept with upgrade.
  At the end everything went well.

• FN keys and volume control does not not on Satellite A210-131

  Hello
  I have a Satellite A210-131 for 3 days now, and the FN keys do not work. The numeric keypad using FN works fine, just the F1-12 combined with FN do nothing. I have the latest drivers and utilities from the website...

  In addition, my touch volume control works quite stupid, it takes less than 20 seconds to set and then its way too hard... I always have to go to the sound control menu to change...
  Help, please!

  Hello

  It's very strange. Usually, if you press the FN key and keep down flash cards must be indicated at the top of the screen. Please try to restart flash cards: start > all programs > TOSHIBA > utilities > restart Flash Cards.

  I don't know what the problem with the touchpad and the control volume but friends Satellite X 200 (the same tablet like on your A200) works well. Problem described is quite strange, and to be honest, I don't know.