Intel R WIDI and Catalyst Control does not

Similar Questions

• ATI CATALYST CONTROL DOES NOT

  my computer hp pavilion 6 1310 tx g laptop
  OS - win 7 Enterprise 64-bit
  ATI radeon hd 6470 m

  Recently I faced the failure of the system, so I formatted win 7. also, I need more space so I created new partitions and formatted disks. Now, I installed win 7 64-bit enterprise edition. I downloaded all the drivers from this link:http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5208...
  When I tried to install the ati drivers what they normally installed without displaying any errors. But I could not locate the catalyst control center after their installation .He is not displayed in the start menu, nor that I can use switchable graphics option.
  I only use intel hd graphics card or my ati radeon.
  in the Device Manager it shows the driver as it used to be earlier
  "ati radeon hd 6470 m.
  This device does not work correctly
  driver date 25 July 11
  driver version: 8.830.6.6000

  So what do I do now, I tried searching in many forums and downloaded many drivers... Tutorials followed, but nothing has worked. Please help me as soon as possible.

  Installation of a non - HP Catalyst Control Center and driver for your laptop will not work. You must download it from your laptop support portal and make uninstalling two-step and install that I have described.

• _doPostback(), calendar and dropdown control does not work on blackberry: RIM's support that?

  Hi all

  I develop mobile site in ASP.NET 2.0, which should work on most common browsers includes blackberry.

  but javascript _doPostback(); fuction does not work, also dropdown selectedIndexChange event also does not work.

  drop-down list and calendar control internally uses _doPostback().

  RIM who makes? If not, then what is the alternative for the drop-down list (I have a lot on my pages).

  Please, give me your feedback if RIM supports _doPostback(); or not.

  Thanks in advance.

  great! It works fine now.

  Thank you all for posting.

• FN keys and volume control does not not on Satellite A210-131

  Hello
  I have a Satellite A210-131 for 3 days now, and the FN keys do not work. The numeric keypad using FN works fine, just the F1-12 combined with FN do nothing. I have the latest drivers and utilities from the website...

  In addition, my touch volume control works quite stupid, it takes less than 20 seconds to set and then its way too hard... I always have to go to the sound control menu to change...
  Help, please!

  Hello

  It's very strange. Usually, if you press the FN key and keep down flash cards must be indicated at the top of the screen. Please try to restart flash cards: start > all programs > TOSHIBA > utilities > restart Flash Cards.

  I don't know what the problem with the touchpad and the control volume but friends Satellite X 200 (the same tablet like on your A200) works well. Problem described is quite strange, and to be honest, I don't know.

• HP 15-500LA OMEN: HP OMEN LIGTH CONTROL DOES NOT WORK

  Hello

  I just got a 15 HP on August 22 and omen control does not change the diodes.  The first thing I did is you update Windows 8 Windows 10. OS is in Spanish

  Control of omen for change the light does not work.

  Can sombody help me to make it work? I'd appreciate help amny

  Thank you so much IMaxx

  I've updated the utility HP System Event and after the reset of the system, it works now

  Thank you once again

• Remote control does not work, and the load does not appear on Apple TV

  Hello

  I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted.

  Apparently that was the case.   He seems to have just died.

  I did pay for more than two hours and it still does not appear under devices Apple TV.

  My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.

  If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.

  Any suggestions on how to fix this?

  A reset is complete? Restart... no change.

  Thank you

  Bob

  1. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
  2. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
  3. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
  4. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.

• My speakers stopped working suddenly. the message I get is good card can be used, but the volume control does not appear and when I go into sounds and devices, everything is gray.

  My speakers suddenly stopped working. I went to audio and I received a message sound card may be in use. The volume control does not appear atr from the bottom of the screen and when I go into properties, everything is gray.

  Hi BarbaraEvanchik,

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  For reference: no sound in Windows

• My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

  My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

  Original title: control sign Vaio

  Hello

  According to my research, the actions must be enabled for individual applications. Check out the following link and activate the gesture for Power Point and Cyberlink PDVD.

  https://us.en.kb.sony.com/app/answers/detail/a_id/36487/~/how-to-configure-vaio-gesture-control-settings.

  For more help, you can contact Sony support.

  https://community.Sony.com/?XID=M:kb_header:eSupport

  Hope that the information provided is useful. Do not respond if you need more help.

• Communication satellite U500 wifi switch control does not work

  Hello

  I have problem after update of the operating system from Vista 64 bit to win7 64-bit. The problem is in the wireless communication switch command before notebok. When I was with win vista, it works fine, post off - wifi off and post-wifi on (without restarting). But when I updated to win7 and install all the drivers of toshiba upgrade dvd, my wifi switch works as follows:

  When I turn on notebook with wifi off button - its turned off all the time and the wifi does not work and fn + F8 (shortcut key for wifi) does not work too. I have to restart the PC with wifi switch in position-the wifi works fine and fn + F8 is able to turn on and turn off the wifi. But that put the material do not react to pass and - diode LED is always on (in case when I start the pc with position control on and in the case where is when off wifi LED is not clear and switching does not work).

  I've updated wifi realtek drivers but still it does not work. IAM verry sorry for my English. I was looking into Toshiba diagnostic tool and there is no modem device, but yes, wifi is perhaps problem here?

  Thank you very much for the reply. Tom

  Hello

  Different Satellite U500 (and other models) supports various wireless network cards, and that's why you'll find also different WLan card drivers.

  Your U500 seems to be equipped with an Intel Wlan card and here you can also download the right Intel Wlan card driver for this card:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• OMEN: HP Omen control does not work.

  Hello

  Until the last HP Support Assistant, HP Omen control was perfectly fine. But after the update, control Omen HP has no control over what anyone. It does not change the keyboard functions, lighting of keyboard, fan speed or f-buttons. How can I solve this problem? Well, I said that HP Support Assistant update caused the problem, but I'm not sure.

  Hi there @Hezaar,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with the control of omen. I'll be happy to help you.

  I found that a newer version of The HP System Event utility is available. If this is not enough I can get the model number, so I can help you.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Satellite M70 - 181 - slider and escape key does not

  FN with F10 keys shows no reaction.
  Check all the drivers.
  But cursor and escape keys does not.
  Need help please

  Joe

  As far as I know, FN + F10 or FN + F11 active integrated keyboard and cursor control keys.

  Satellite M70 is a fairly old machine and I do not remember which driver may be responsible for this control. Try to reinstall the Toshiba Accessibility or FN-esse utility. Maybe this will help.

  I had M70 long ago, but I've never used this option.

• Satellite X 200 - after upgrading Vista remote control does not work

  Hello

  I have upgrated my Vista Home Premium to Vista Ultimate and the remote control does not work. Well upgraded... I bought Vista ultimate and it installed.

  Is there a driver for my remote?

  You may need to install the infrared driver.
  This driver is required to activate the infrared port on your laptop.

  You can find it here in the X 200 section
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Re: Satellite L500 iCQ, as Volume Rotary control does not work

  Front volume control does not work. Volume is set to maximum and can only be controlled by the mouse and the slider control.
  Can anyone help?

  To be honest I don't think that anyone will be able to help you with this.
  As far as I know that's not used such mechanical volume on older models of computers laptops, but electronically part controlled by software, so the only thing you can do is to test the functionality with the settings and see if the problem will be the same.

  What else can you do? I do not know. Maybe update the BIOS, but I do not think that this will help you.

  Do you use pre-installed OS original you got with your laptop?
  Have you made some changes or anything that can have a negative influence in this?
  Since when you noticed this strange behavior?

• ATI Catalyst Install Manager and Catalyst Control Center help

  I just run the Windows 7 upgrade

  report from the consultant and he said that I have to uninstall the ATI Catalyst Install Manager and Catalyst Control Center and then reinstall after upgrade...

  Could someone direct me to where I could t find these programs for Windows 7

  You should not do this. Just proceed with the upgrade installation.
  On my Satellite, I got the same message, but I just kept with upgrade.
  At the end everything went well.

• Satellite P100 remote control does not work

  Hello

  Guys, I bought a toshiba satellite p100 and the remote with it does not work...

  no idea why? the battery must be fully charged... but when I press the buttons of the led on the remote control does not work or the other...

  Help, please...

  Thank you...

  Post edited by: qazam

  Hi Qazam

  How did you test the remote control?
  What do you mean who does not? Some functions does not work or a complete remote control cannot be used?

  I read the user manual and it seems that the remote will work under Windows mode with WinDVD or Express Media player, and Windows Media Player when the laptop was not started in the Windows operating system.