Cisco 800 VPN to a NetScreen-25

Similar Questions

• integrated macOS Sierra Cisco IPsec VPN does not work anymore (impossible to validate the server certificate)

  Hello

  I just upgraded to macOS Sierra and built-in Cisco IPsec VPN no longer works. When you try to connect, I get a "cannot validate the certificate of the server. "Check your settings and try to reconnect" error message. I use Cisco ASA with self-signed certificates and everything worked fine with previous versions of OS X.

  Please help me, I need my VPN Thx a lot

  I am having the same problem with StrongSwan and help cert signed with the channel to complete certificates included in the pkcs12 file imported to the keychain. It was working properly in El Capitan, but now broken in the Sierra.

• Cisco AnyConnect VPN Client maintains reconnection

  Hello

  We have recently installed an ASA5505 and activated the VPN access.

  Two of my colleagues have no problems connecting to the VPN using Cisco AnyConnect VPN Client, but I do.

  I am still disconnected after a few seconds with the message:

  "A VPN reconnect gave rise to different configuration settings. VPN network interface is to be reset. Applications using the private network may be required to restart. »

  Cisco AnyConnect VPN Client Version 2.5.2019

  I work with Windows 7 but the same thing happens when I try to connect using my computer that is running Windows Vista.

  My colleagues also using Win7

  I also tried to disable the Windows Firewall.

  Any help would be appreciated.

  Best regards

  Peter

  TAC has been able to solve the problem.   For webvpn mtu changed default from 1406 to 1200.

  Not sure why 2 other ASAs we work very well otherwise though!

  WebVPN
  SVC mtu 1200

• CISCO ANYCONNECT VPN CISCO VPN CLIENT

  Hi, I was in the process of configuring cisco anyconnect vpn for ip phones to our local obtained the license for them either, the question that I get is that I already have remote configured cisco connect via the old cisco vpn client.

  now, if I activate the anyconnect ssl on the same outside the interface both can exist without conflict or maybe I need to migrate users to install the end customer for anyconnect system software to connect.

  I also need help with authentication of certification.

  concerning

  You can run both VPN at the same time without problems.

  However, you should try and migrate everyone to the latest technology Anyconnect SSL anyway.

• Cisco AnyConnect VPN Client (connection attempt failed because the network or pc problem cisco)

  Hi all

  I am trying to connect to my Cisco AnyConnect VPN Client but everytime I try, I get an error (connection attempt failed because the network or pc problem cisco)

  Can anyone help me please with this.

  Thank you

  Zia

  What is the local firewall on your computer?

• Cannot access the internal network with Cisco easy vpn client RV320

  I have a cisco RV320 (firmware v1.1.1.06) and created a tunnel easy vpn (= split tunnel tunnel mode), then I installed the cisco client vpn v5.0.07.0290 in Windows 7 64 bit, I can connect to the vpn, but I do not see the other pc ping nor them, no idea?

  Thank you

  Hello

  1. is the firewall on the active Windows 7 computer? If so, please disable it

  2. can you check that you get a correct IP address in the range of the POOL of IP configured?

  3. When you perform the tracert command to access an internal server, it crosses the VPN¨?

  4. is the tunnel of split giving you access to internal IP subnets defined?

  5. on the RV320 you see the user connected and sending and receiving bytes?

  Don t forget to rate and score as correct the helpful post!

  David Castro,

  Kind regards

• BlackBerry 10 BB10 actually supported Cisco AnyConnect VPN?

  I am confused when I click Cisco AnyConnect VPN gateway Type list, and then turned to BlackBerry World looking for Cisco AnyConnect. But he has not named any application. BB10 really takes it? or it is my mistake to miss. Help, please... Thank you.

  Hello

  Maybe you can check it out here:
  http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/Cisco-AnyConnect-VPN/m-p/303...

• Cisco Anyconnect VPN client cannot establish a connection.

  Hello

  I am trying to connect to my server license from the University. I use 'Cisco Anyconnect VPN', but when it is goinh to initialize the connection it gives me the error "unable to establish a connection to the VPN client. At this point, the network of my Cisco anyconnect adapter gets disable automatically.

  I have no antivirus, and also it happens even when I turn off my firewall.

  Please help me solve this problem that prevents me from my all of the work!

  Thank you in advance.

  In addition to the advice of John I would also look at this document from Cisco for possible help...

  http://www.Cisco.com/image/gif/paws/100597/AnyConnect-VPN-Troubleshooting.PDF

  Cisco help as much as possible...

  http://www.Cisco.com/en/us/products/ps8411/tsd_products_support_series_home.html

  Its also possible you may have to run or reinstall the Cisco client in compatibility mode, if they do not have a version of Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/help/compatibility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-program-compatibility-Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Otherwise contact your university network administrators may also be a viable option.

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »

• Cisco 1700 Setup as a hub for Cisco Anyconnect VPN

  The complete configuration for the router is attached. Additional configuration includes forwarding port 443 (the two tcp/udp), udp 4500, udp 500 and udp 50 to 192.168.1.20.

  Objective: Configure Cisco 1700 router as a VPN server, which a Cisco Anyconnect VPN client in. The VPN server is behind a NAT.

  Question 1: The Cisco Anyconnect client pulls its set of configuration of the router? I just need to point to the correct IP address and hit connect and it will do the rest? If not, what additional client side configuration must be done? I noticed, it tries to connect on port 443 to my router, but I don't really know why and I know that my router is not listening on this port, so I know I'm missing something:-D.

  Question 2: What are the features specifically include easy vpn server? I am confused as to exactly what it is. From what I can tell when you configure easy vpn server you simply set up a regular VPN.

  Question 3: Cisco Easy VPN remote has something to do with Cisco Anyconnect or they are completely distinct?

  Sorry for the newbie questions. It's really hard to understand the different systems and features on it and most of the examples I found dealt with the VPN router to router rather than configurations just for computers of end users, but I'll be the first to admit that I am new on this hahaha.

  Thanks for your help.

  PS: Any comment on the misconfigs are welcome. I'm still trying to understand fully exactly what each command does.

  Grant

  Grant,

  AnyConnect can do SSLVPN or IPsec (with IKEv2), ezvpn is all about IKEv1, it won't work.

  There (part 3) customers who will be able to connect to ezvpn, as well as the former customer Cisco VPN, but AC is not.

  BTW... it's not 50/UDP, this is IP protocol 50 (or sometimes 51) - ESP (or AH).

  You don't have TCP and UDP 443 for IPsec, but you may need them for SSL.

  And seriously... series of 1700? Wow, this is a 'retro' kit :-) Support ended 6 years ago.

  M.

• Select the timeout on ASA Cisco Anyconnect VPN

  Hello world

  I use the Cisco Anyconnect VPN client with the ASA 5540 firewall. I need allow a time-out on the VPN clients, so they log off after x hours of inactivity.

  Thank you to

  Best respect

  Hello

  To my understanding of the default timeout value is 30 minutes

  You should be able to change this setting in the "username" configurations (if you use LOCAL AAA on the SAA) or under the configurations of the 'group policy' .

  The command is

  VPN-idle-timeout

  Here is the link of the commands reference

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/ASA-command-reference/...

  -Jouni

• Cisco SSL VPN

  We currently have Cisco ASA 5520 s with 8.4.3.  What we would like to do is to configure a Cisco SSL VPN, where we would have a web user in a site, https://oursite.oursite.com and having an agent a download after authentication has been accepted.  Once completed, it reserved the right to have the agent remains on the device or remove it completely with no residual.

  Is it possible today on the Cisco ASA? Are there examples of configuration for this?  I have to download the last file anyconnect?

  Thanks to you all

  Dwane

  If you mean the AnyConnect Client when you talk about the 'agent', then you can do it like that. The only difference will be that the function to remove the client after disconnecting is not available any more in the latest software.

  The best way to configure this is via the VPN Wizard of the AMPS. You can enable the preview in the preferences command if you are interested in the CLI config resulting.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Cisco AnyConnect VPN connection has not changed my public IP address on Windows 7 64 bit

  Hello

  I installed a customer Cisco AnyConnect VPN from my school, so that I can access school of my Windows 7 laptop at home network. I was able to connect, but when I used http://www.whatismyip.com/, it still shows the IP address assigned by my ISP.  The "network and sharing Center", I have my original LAN and LAN VPN upward but access to LAN VPN type is 'without Internet access. The VPN connection seems to have activities based on evolution bytes sent and received.

  I searched the Web for solutions and changed something like adding the entry door. But it did not help.

  Thanks for your help.

  Split tunnel is probably configured so that traffic destined to school networks pass through the VPN tunnel, and traffic destined to the Internet goes outward through your local ISP. That's why whatismyip show your public IP address from ISP.

• PlayBook & cisco Easy VPN Server 831

  I don't seem to be able to connect to my router 831 cisco easy vpn server is configured by using my Blackberry Playbook.  Looking at the console of the router I can see Debugging but don't know what it means.  I have attached debugging as well as glued my setup, if someone is able to help me at all it would be much appreciated.  Thank you very much.

  Current configuration: 2574 bytes
  !
  version 12.3
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  enable secret 5 $1$ FM71$ y4ejS2icnqX79b9gD92E81
  enable password xxxx
  !
  username privilege 15 password 0 $1$ W1fA CRWS_Ritesh $ o1oSEpa163775446
  username privilege 15 secret 5 shamilton wFLF $1$ $ 8eRxnrrgVHMXXC0bXdEGi1
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authorization exec default local
  AAA authorization ciscocp_vpn_group_ml_1 LAN
  AAA - the id of the joint session
  IP subnet zero
  no ip Routing
  !
  !
  audit of IP notify Journal
  Max-events of po verification IP 100
  No ftp server enable write
  !
  !
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  ISAKMP xauth timeout 15 crypto

  !
  ISAKMP crypto client configuration group ciscogroup
  (deleted) 0 key
  DNS 172.16.60.246 172.16.60.237
  pool SDM_POOL_3
  ACL 100
  Save-password
  include-local-lan
  !
  !
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  !
  crypto dynamic-map SDM_DYNMAP_1 1
  game of transformation-ESP-3DES-SHA
  market arriere-route
  !
  !
  card crypto SDM_CMAP_1 client authentication list ciscocp_vpn_xauth_ml_1
  map SDM_CMAP_1 isakmp authorization list ciscocp_vpn_group_ml_1 crypto
  client configuration address map SDM_CMAP_1 crypto answer
  map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
  !
  !
  !
  !
  interface Ethernet0
  IP 172.16.60.241 255.255.255.0
  IP nat inside
  no ip route cache
  !
  interface Ethernet1
  DHCP IP address
  NAT outside IP
  no ip route cache
  automatic duplex
  map SDM_CMAP_1 crypto
  !
  interface FastEthernet1
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface FastEthernet2
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface FastEthernet3
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface FastEthernet4
  no ip address
  automatic duplex
  automatic speed
  !
  local IP SDM_POOL_1 172.16.60.190 pool 172.16.60.199
  pool of local SDM_POOL_2 192.168.1.1 IP 192.168.1.100
  local IP SDM_POOL_3 172.16.61.100 pool 172.16.61.150
  IP nat inside source overload map route SDM_RMAP_1 interface Ethernet1
  IP classless
  !
  IP http server
  no ip http secure server
  !
  Remark SDM_ACL category of access list 1 = 2
  access-list 1 permit 172.16.60.0 0.0.0.255
  Note access-list 100 category CCP_ACL = 4
  access-list 100 permit ip 172.16.60.0 0.0.0.255 any
  public RO SNMP-server community
  Enable SNMP-Server intercepts ATS
  !
  Line con 0
  no activation of the modem
  line to 0
  line vty 0 4
  exec-timeout 120 0
  password xxxxx
  length 0
  !
  max-task-time 5000 Planner
  !
  end

  Stace,

  *Mar  1 06:40:15.258: ISAKMP: transform 1, ESP_AES
  *Mar  1 06:40:15.258: ISAKMP:   attributes in transform:
  *Mar  1 06:40:15.262: ISAKMP:      SA life type in seconds
  *Mar  1 06:40:15.262: ISAKMP:      SA life duration (basic) of 10800
  *Mar  1 06:40:15.262: ISAKMP:      encaps is 61443
  *Mar  1 06:40:15.262: ISAKMP:      key length is 256
  *Mar  1 06:40:15.262: ISAKMP:      authenticator is HMAC-SHA
  *Mar  1 06:40:15.262: ISAKMP (0:14): atts are acceptable.
  *Mar  1 06:40:15.262: ISAKMP (0:14): IPSec policy invalidated proposal
  *Mar  1 06:40:15.262: ISAKMP (0:14): phase 2 SA policy not acceptable! (local 14
  

  The other end offers AES 256 and SHA IPSec transform set.

  While you have configured:

  crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

  Suggestion:

  Add a new set of transofrm and apply it under crypto map.

  HTH,

  Marcin

• Unable to connect to the Internet, the error message "Cisco AnyConnect VPN agent service is not responding. Please restart this application after a minute"

  Original title: unable to connect to the internet

  Whenever I connect to my computer and get it on my desk, it goes on to say that Cisco AnyConnect VPN Service not available. How can I fix? I am not connected to the internet and I can't connect to the internet as well. He said also Cisco AnyConnect VPN service agent is not an answer. Please restart this application after a minute. Also, I can't use my firewall for some reason, if I try to allow its loading and the greenbar's going that far - then stops and says that there is an error. I forgot where I tried to activate.

  Oh thanks for the help but I fix it myself. I just did a system restore to a month before

• Easy vpn server issues of Cisco 800 series.

  Hello.

  I want to deploy the easy vpn server on cisco 876 and 877 10 routers and access from a remote location (company headquarters). When I leave the firewall of the router off the vpn server works. When I turn it on it doesn't.

  Although I allow all traffic to my ip for example 80.76.61.158 I can't access the vpn server.

  I tried a place to let the firewall off and it worked fine.

  I use SDM to configure the vpn server. Any ideas what I can do with the cause of firewall I really can't leave it "open."

  Thanks in advance.

  It would be a good idea to paste the configuration of the VPN server to the firewall.

  Kind regards

  Kamal