Cisco Anyconnect Always on
My question is how still works activated when connecting to wifi networks where you can drop in their net comments to authenticate on a Web page?
Could deduct the initial communication and then kick VPN requirements?
Hey, Derrick.
This portal of comments is usually called "Captive portal", and Cisco AnyConnect has an option to detect captive portals. For more information, see:
Tags: Cisco Security
Similar Questions
-
AnyConnect-Always-on does not work
Hello
I have been always - on VPN on ASA5510 (version 9.1 of the software).
I used a Windows PC to connect, the always-on the job very well.
But on the iphone (ios8.1.2) or android smartphone the always - it did not work.
Tried specific to the list of servers "always connect" in profile anyconnect Alway-on still not connect.
My reference document:
http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...
Hi Mike,.
Always active and TND is not supported on mobile platforms. Yes, you are referring to the correct document however he speaks the Windows and Mac OSX, and he doesn't speak of mobile platforms. Please see below why it is not supported.
- Always on (forced) VPN - tie-ins including Web Security Appliance *.
Always On cannot be implemented on iOS because of the limitations of the operating system. Also, this feature might not at all desirable from the user point of view, because it would have repercussions on the life of the battery and could be talkative that the iPhone has left wifi to 3 g and back in weak signal conditions.
- Detection of trusted network
TND is not possible on iOS due to limitations of the operating system. The best thing is to use the "VPN on demand" feature, which can be used to direct the AnyConnect to launch whenever we communicate with the hosts specified IOS.
Let me know if that answers your question.
Thank you
Vishnu
- Always on (forced) VPN - tie-ins including Web Security Appliance *.
-
Cisco AnyConnect 2.5.1025 on Win7 x 64 Ultimate edition (SP1)
Dear Sirs and Madams,
I experience hard attempts to establish a VPN connection in above mentioned environment on a UMTS device (which works fine on my X 61, running Win7 x 64 Enterprise (SP1)).
VPN session is launched, research for client-config (/ day) pass through, but then the session gets closed with two error messages, see:
"The Client VPN could not check the IP forwarding table changes. A VPN connection can be established. »
and
"He could not establish aa connection with the specified AnyConnect secure gateway. Please try to connect. »
1: no, I have no 'Hello' - service installed (or running).
2nd: services cross-checked with my laptop - began to those running stopped there, those who stopped there-> the same behavior.
3rd: install 1 package (.msi) of the web-deployment times & the other inside IE9 (via ActiveX). always the same.
4th: disabled Windows Defender, Avira FreeAV, added compensation for the customer of firewall and VPN server to the "trusted sites". Also been clarified 1This IE cache. Nothing.
5th: Ciscos and Reporting diagnostic tool-> he ran.
Found 1 very interesting event (in eventviewer | applications and services: cisco anyconnect VPN client) says:
Function: XmlLocalACPolMgr::addAttribute
File:... \Common\Xml\XmlLocalACPolMgr.cpp
Online: 679
Analyzed local security policy file version is newer than the current AnyConnect Client. Can cause unexpected behaviors.Later, I get a lot of warning events, saying:
Function: (various)
.
.
Description: TLV_ERROR_NO_ATTRIBUTE
2 more errors while modifying routing table, the latter described with:
Description: ROUTETABLE_ERROR_CREATEIPFORWARDENTRY_FAILED
another warning:
Index of entry way questionable in "Modified" table: 15
another error:
Function: CRouteMgr::modifyRoutingTable
File:.\RouteMgr.cpp
Line: 962
Called the function: CChangeRouteTable::VerifyRouteTable
Return code:-33095654 (0xFE07001A)
Description: ROUTETABLE_ERROR_UNACCOUNTED_ROUTE_TABLE_ENTRYfollowed by another error:
Function: CHostConfigMgr::applyRouteConfiguration
File:.\HostConfigMgr.cpp
Line: 676
Called the function: CRouteMgr::modifyRoutingTable
Return code:-33161202 (0xFE06000E)
Description: ROUTEMGR_ERROR_ROUTE_TABLE_VERIFICATION_FAILEDfollow-up of the caveat:
Function: CIPv4VistaRouteTable::AddRoute
File:.\Utility\IPv4VistaRouteTable.cpp
Online: 107
Called function: CreateIpForwardEntry
Return code: 5010 (0 x 00001392)
Description: The object already exists.and so on. Any other ideas? I'm really excited about it. Help, please.
Thank you very much in advance,
Roman
Update: checked eventviewer on laptop. same errors as above from there. Establish VPN, however.
Hi RRoman_404,
I suggest you perform the clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
If this doesn't help, you may need to contact the vendor of the application.
It will be useful.
-
Setup for use with Cisco Anyconnect VPN IPsec
So, I had trouble setting up VPN on our ASA 5510. I would use IPsec VPN so that we don't have to worry about licensing issues, but what I have read you can do with and always use Cisco Anyconnect. My knowledge on how to set up VPN especially in iOS version 8.4 is limited, so I've been using a combination of command line and ASDM.
I am finally able to connect from a remote location, but once I log in, nothing else works. What I've read, you can use IPsec for client-to-lan connections. I use a pre-shared for this. Documentation is limited on what should happen after have connected you? Shouldn't be able to local access on the vpn connection computers? I'm trying to implement work. If I have VPN from home, should not be able to access all of the resources at work? According to me, because I used the command-line as ASDM I confused some of the configuration. In addition, I think that some of the default policies are confused me too. So I probably need a lot of help. Here is my current setup with the changed IP address and other things that are not related to deleted VPN.
NOTE: We are still testing this ASA and is not in production.
Any help you can give me is greatly appreciated.
ASA Version 8.4 (2)
!
ASA host name
domain.com domain name
!
interface Ethernet0/0
nameif inside
security-level 100
the IP 192.168.0.1 255.255.255.0
!
interface Ethernet0/1
nameif outside
security-level 0
IP 50.1.1.225 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
No nameif
security-level 100
IP 192.168.1.1 255.255.255.0
!
boot system Disk0: / asa842 - k8.bin
passive FTP mode
DNS domain-lookup outside
DNS server-group DefaultDNS
!
permit same-security-traffic intra-interface
!
network of the NETWORK_OBJ_192.168.0.224_27 object
subnet 192.168.0.224 255.255.255.224
!
object-group service VPN
ESP service object
the purpose of the tcp destination eq ssh service
the purpose of the tcp destination eq https service
the purpose of the service udp destination eq 443
the destination eq isakmp udp service object
!
allowed IP extended ip access list a whole
!
mask 192.168.0.225 - 192.168.0.250 255.255.255.0 IP local pool VPNPool
no failover
failover time-out period - 1
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 645.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.0.224_27 NETWORK_OBJ_192.168.0.224_27 non-proxy-arp-search to itinerary
!
the object of the LAN network
NAT dynamic interface (indoor, outdoor)
Access-group outside_in in external interface
Route outside 0.0.0.0 0.0.0.0 50.1.1.250 1
Sysopt noproxyarp inside
Sysopt noproxyarp outdoors
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = ASA
Configure CRL
crypto ca server
Shutdown
string encryption ca ASDM_TrustPoint0 certificates
certificate d2c18c4e
864886f7 0d06092a c18c4e30 308201f3 3082015c a0030201 d 020204 2 0d 010105
0500303e 3110300e 06035504 03130741 53413535 3130312a 2 a 864886 30280609
02161b 41 53413535 31302e64 69676974 616c 6578 7472656d 65732e63 f70d0109
3131 31303036 31393133 31365a 17 323131 30303331 39313331 0d 170d 6f6d301e
365a303e 3110300e 06035504 03130741 53413535 3130312a 2 a 864886 30280609
02161b 41 53413535 31302e64 69676974 616c 6578 7472656d 65732e63 f70d0109
6f6d3081 9f300d06 092 has 8648 86f70d01 01010500 03818d b 30818902-00-818100-2
8acbe1f4 5aa19dc5 d3379bf0 f0e1177d 79b2b7cf cc6b4623 d1d97d4c 53c9643b
37f32caf b13b5205 d24457f2 b5d674cb 399f86d0 e6c3335f 031d54f4 d6ca246c
234b32b2 b3ad2bf6 e3f824c0 95bada06 f5173ad2 329c28f8 20daaccf 04c 51782
3ca319d0 d5d415ca 36a9eaff f9a7cf9c f7d5e6cc 5f7a3412 98e71de8 37150f02
03010001 300 d 0609 2a 864886 f70d0101 05050003 8181009d d2d4228d 381112a 1
cfd05ec1 0f51a828 0748172e 3ff7b480 26c197f5 fd07dd49 01cd9db6 9152c4dc
18d0f452 50f5d0f5 4a8279c4 4c1505f9 f5e691cc 59173dd1 7b86de4f 4e804ac6
beb342d1 f2db1d1f 878bb086 981536cf f4094dbf 36c5371f e1a0db0a 75685bef
af72e31f a1c4a892 d0acc618 888b53d1 9b 888669 70e398
quit smoking
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev2 access remote trustpoint ASDM_TrustPoint0
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 10
Console timeout 0
management-access inside
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
AnyConnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 2
AnyConnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3
profiles of AnyConnect VPN disk0: / devpn.xml
AnyConnect enable
tunnel-group-list activate
internal VPN group policy
attributes of VPN group policy
value of server WINS 50.1.1.17 50.1.1.18
value of 50.1.1.17 DNS server 50.1.1.18
Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
digitalextremes.com value by default-field
WebVPN
value of AnyConnect VPN type user profiles
always-on-vpn-profile setting
privilege of xxxxxxxxx encrypted password username administrator 15
VPN1 xxxxxxxxx encrypted password username
VPN Tunnel-group type remote access
General-attributes of VPN Tunnel-group
address (inside) VPNPool pool
address pool VPNPool
LOCAL authority-server-group
Group Policy - by default-VPN
VPN Tunnel-group webvpn-attributes
enable VPN group-alias
Group-tunnel VPN ipsec-attributes
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
class-map ips
corresponds to the IP access list
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the http
class ips
IPS inline help
class class by default
Statistical accounting of user
I would recommend buy AnyConnect Essentials. The cost of the license is nominal - list of US $150 for the 5510. (piece number L-ASA-AC-E-5510 =)
Meawwhile you can use the Cisco VPN client inherited with IKEv1 IPSec remote access VPN using profiles *.pcf.
I believe you can also use the client Anyconnect client SSL or DTLS transport access remotely (non-IPsec) without having to buy the license Anyconnect Essentials for your ASA focus.
As an aside, note that if you want to use AnyConnect Mobile (e.g. for iPhone, iPad, Android, Blackberry etc.clients) you will also get the additional license for it (L-ASA-AC-M-5510 =, also price US $150)
-
HotSpot iOS 9.3.1 works do not with Cisco AnyConnect
Does anyone else have this problem? Since the upgrade to 9.3.1 iOS I am more able to use one of the hotspot from my iPhone to connect to the VPN from my company using Cisco AnyConnect. I can still connect via Wi-Fi, but not with the iPhone 5s or 6s hotspot feature.
Ideas?
TIA,
DM
Hello, I'm from the Italy, and I have the same problem on my 5 64 GB iPhone.
I have updated to iOS 9.3.1 and now I don't have the Hotspot feature in the phone settings Menu.
What is happen? I work with this feature and now I need to change the phone!
-
Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.
I have win 7 x 64 enterprize edition on my laptop.
I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.
But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.
Please help me to solve this problem as soon as possible.
Hi Manish,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.
I also recommend that you contact the VPN support to help:
https://supportforums.Cisco.com/community/NetPro/security/VPN
-
ACLog.dll missing killing Cisco Anyconnect Secure Mobiltiy customer
I use 'Cisco AnyConnect Secure Mobility Client' on Windows 7 for a year now with no problems.
All started yesterday when I try to connect I get this error message:dialog title: vpnui.exe - system error
message: "the program can't start because aclog.dll is missing on your computer. Try reinstalling the program to fix this problem. »
So, of course, I tried to reinstall, but without success.
I keep reading that aclog.dll is a windows system dll.
No idea how to solve this problem?I installed Visual Studio SP1 of 2015, the other day and it looked like there were a few errors in the final dialog box. Would he have the issue?
Hello
Thank you for visiting Microsoft Community and we provide a detailed description of the issue.
I suggest you to send your request in the TechNet forums to get the problem resolved.
Please visit the link below to send your query in the TechNet forums:
https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer
Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.
-
Cisco AnyConnect disabled after the installation of update KB3092627
After the execution of automatic updates on 03/10/15, AnyConnect would not start and was not in my system tray. I uninstalled the update (KB3092627) and the returned icon and am now able to use Cisco AnyConnect. Anyone know if there is a specific problem here and I need the update?
Hello
Thanks for posting your query in Microsoft Community.
Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.
Please post your question in the TechNet Forums.
-
Cisco AnyConnect VPN Client maintains reconnection
Hello
We have recently installed an ASA5505 and activated the VPN access.
Two of my colleagues have no problems connecting to the VPN using Cisco AnyConnect VPN Client, but I do.
I am still disconnected after a few seconds with the message:
"A VPN reconnect gave rise to different configuration settings. VPN network interface is to be reset. Applications using the private network may be required to restart. »
Cisco AnyConnect VPN Client Version 2.5.2019
I work with Windows 7 but the same thing happens when I try to connect using my computer that is running Windows Vista.
My colleagues also using Win7
I also tried to disable the Windows Firewall.
Any help would be appreciated.
Best regards
Peter
TAC has been able to solve the problem. For webvpn mtu changed default from 1406 to 1200.
Not sure why 2 other ASAs we work very well otherwise though!
WebVPN
SVC mtu 1200 -
Cisco AnyConnect do IPsec?
Hi guys
I have a Cisco ASA5520 with software Version 8.2 (5) in place, most my users are Mac users and I am currently looking into Cisco AnyConnect in comparison using the VPN client.
I have a few questions
(1) Cisco AnyConnect does he use IPSec or is it soley based SSL VPN?
(2) the license information I have in my ASA below, I understand that I can get max 750 vpn peers am however I have reason to say that this does not apply to Cisco AnyConnect peers? and with Cisco AnyConnect, I can only have 2 peers? Also, what are the options for mobility anyconnect for?
The devices allowed for this platform:
The maximum physical Interfaces: unlimited
VLAN maximum: 150
Internal hosts: unlimited
Failover: Active/active
VPN - A: enabled
VPN-3DES-AES: enabled
Security contexts: 2
GTP/GPRS: disabled
SSL VPN peers: 2
Total of the VPN peers: 750
Sharing license: disabled
AnyConnect for Mobile: disabled
AnyConnect Cisco VPN phone: disabled
AnyConnect Essentials: disabled
Assessment of Advanced endpoint: disabled
Proxy sessions for the UC phone: 2
Total number of Sessions of Proxy UC: 2
Botnet traffic filter: disabled
(3) when you try to configure Cisco Anyconnect on the SAA by using ASDM, I noticed that I needed to download AnyConnect client images, but when I did this by downloading the .dmg for mac machines file I got the error message 'not an image valid of the SVC'. Is it because I'm under 8.2?
Your help is highly appreciated
Concerning
Mohamed
Hi Mohammad,.
I'll answer your questions one by one:
1 cisco Anyconnect version 3.0 and above all support SSL and IPSECv2 connection. If you want the user to connect using the Anyconnect client IPSECv2 then it will consume the SSL license and not the IPsec license however if you use IPSECv2 for connections such as vpn site to site then it will consume normal IPSec VPN license.
2. one. SSL VPN peers: this license gives you information about the number of users that can connect using SSL protocol for example using the Anyconnect and web portal customer also known as the clientless VPN based on. I see here there are only 2 licenses so at any given time only 2 users can connect successfully because 750 is the total number of licenses available for the VPN on the SAA, 698 only will be available for IPSec connections.
b. Anyconnect for mobile: this license is required whenever a user connects from a Pocket like device: Iphone, Ipad, tablets etc.
c. Anyconnect of Cisco VPN phone: Cisco IP phones have the ability to connect to an ASA remote using the SSL protocol and to enable this feature, you should have this license is activated on the SAA.
d. Anyconnect essentials: Anyconnect there are two licenses, one > Anyconnect Premium and b > Anyconnect Essentials. AnyConnect essentials is less expensive as premium per report Anyconnect license. This license is for those who don't use webvpn or VPN without client. When the license is activated, the user can connect only to the Anyconnect VPN client.
3. I don't know what image you use on the ASA. Please try the image named as anyconnect-macosx-i386 - 2.5.2010 - k9.pkg.
To apply the changes using the command line, put this image on disk0: and then type this command on the CLI.
Image disk0:/anyconnect-macosx-i386-2.5.2010-k9.pkg SVC
Let me know if it helps.
Thank you
Vishnu Sharma
-
Record of equipment for the Cisco AnyConnect client NAM module
Hi all
Forgive me if this has been asked before or on the Cisco site somewhere (I could just find)
Are there hardware specifications for the Cisco Anyconnect Network Access Manager module?
Where can I find what wifi chipset is compatible with?
Thanks in advance for your answer.
Compatibility with the NAM module is based on the chipset not guest OS. The current operating system compatibility is listed here.
-
CISCO ANYCONNECT VPN CISCO VPN CLIENT
Hi, I was in the process of configuring cisco anyconnect vpn for ip phones to our local obtained the license for them either, the question that I get is that I already have remote configured cisco connect via the old cisco vpn client.
now, if I activate the anyconnect ssl on the same outside the interface both can exist without conflict or maybe I need to migrate users to install the end customer for anyconnect system software to connect.
I also need help with authentication of certification.
concerning
You can run both VPN at the same time without problems.
However, you should try and migrate everyone to the latest technology Anyconnect SSL anyway.
-
Cisco Anyconnect to mobile license?
Dear all:
Currently, we will activate cisco anyconnect for mobile (IPAD), our license is currently:
Material: ASA5510, 1024 MB RAM, Pentium 4 Celeron 1599 MHz processor
Internal ATA Compact Flash, 256 MBHardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
The devices allowed for this platform:
The maximum physical Interfaces: unlimited
VLAN maximum: 100
Internal hosts: unlimited
Failover: Active/active
VPN - A: enabled
VPN-3DES-AES: enabled
Security contexts: 2
GTP/GPRS: disabled
VPN SSL counterparts: 10
The VPN peers total: 250
Sharing license: disabled
AnyConnect for Mobile: disabled
AnyConnect Cisco VPN phone: disabled
AnyConnect Essentials: disabled
Assessment of Advanced endpoint: disabled
Proxy sessions for the UC phone: 2
Total number of Sessions of Proxy UC: 2
Botnet traffic filter: disabledThis platform includes an ASA 5510 Security Plus license.
as I read, so cisco anyconnect for mobile (IPAD), I need two licenses:
AnyConnect Essentials and AnyConnect for Mobile, is that correct?
If I want to activate this just for 10 users, I can do this? What are the available license I have to select by the user issues a year (or over a year?)
can my final question get these licenses from Amazon, since google shows as these offers.
Please help thanks
I would go for the license more. It is much cheaper then the VPN-only-license and you can continue to use it when you change the ASA in a newer model.
-
Hi all
I am trying to connect to my Cisco AnyConnect VPN Client but everytime I try, I get an error (connection attempt failed because the network or pc problem cisco)
Can anyone help me please with this.
Thank you
Zia
What is the local firewall on your computer?
-
BlackBerry 10 BB10 actually supported Cisco AnyConnect VPN?
I am confused when I click Cisco AnyConnect VPN gateway Type list, and then turned to BlackBerry World looking for Cisco AnyConnect. But he has not named any application. BB10 really takes it? or it is my mistake to miss. Help, please... Thank you.
Hello
Maybe you can check it out here:
http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/Cisco-AnyConnect-VPN/m-p/303...
Maybe you are looking for
-
How to choose a new calendar as a "schedule in writing"?
Thunderbird 24.3.0/Mac OS X Mavericks/Lightning 2.6.4. I have a set schedule in place for synchronization with a cloud Internet service (not Google; not iCloud). This calendar has worked well for me for months and I have many events calendar and task
-
Why can't I access the preferences of Safari?
Hi everyone - well, I've done this and have no idea how to fix this: I downloaded an absurd one Microsoft Office program, it then loaded some sort of program that changed my homepage of Bing and now I can't "find" my preference window when I try to o
-
WhenI try to join a photo etc to my e mail I have place a word block above attach or see that will not produce the Word set only & clicking. I managed to not send no problem yesterday, but today he's back for the word block. It does so not. I tried t
-
Satellite A500-18R - several problems
Hello everyone. I bought a Toshiba Satellite A500-18R (Windows 7 64 - bits) in January. During the first half of the year do not use it too, but in these last 3-4 months that I have experience several problems. I would like to know if anyone has expe
-
It flashes E95 312, ideas?