Cisco Anyconnect to mobile license?

Similar Questions

• Cisco AnyConnect Secure mobility Client cannot initialize connection subsystem after updates Windows (Feb 10, 2015)

  Hello

  The customer Cisco Anyconnect Secure mobility gives me an error when I try to use it. It started after the latest updates for Windows (10 Feb. 2015).

  The error it causes is "could not initialize the subsystem of connection".

  I looked at another machine with the updates installed with same issue.

  On my machine - I back before restore point windows updates be done, and the Cisco Anyconnect Client's worked well.

  After you install the updates, it stopped working again.

  Help, please

  Michael

  I assume you are using Windows 8.1. The workaround is to set the AnyConnect Client to use Windows 8 Compatibility Mode. He has worked on several machines. After the change, you will need to log off the coast and turn it on for Windows.

  Cumulative update 11 IE KB3021952 includes KB3023607.  Apparently, it's the latest patch that causes the problem, according to what I said. (I do not even 3023607 in the history of WU, but if I type "wmic qfe" is here). However, I suggest updating leaving in place and using workaround.

• Configuration Cisco AnyConnect secure mobility assistance

  Hello!

  A partner of CIsco of Singapore asks if it would be possible on Cisco Anyconnect Secure Mobility

  If I want to use "Cisco AnyConnect Secure mobility" in Anyconnect 3.0, I can set that the user is not able to access all traffic via a wireless sound card when the VPN is established via the wired LAN port. I want to prevent any bypass between these two network ports if the VPN in place.

  In addition, to enable split tunneling so that all traffic has to go through the VPN tunnel?

  Kind regards!

  Ice Flancia

  Cisco partner Helpline Tier 2 team

  To route all traffic to the VPN tunnel, split tunnel should be turned off (not enabled).

  Under group policy configuration: split-tunnel-policy tunnelall

  Once the split tunnel is disabled, VPN users will not be able to access one of its local LAN networks (including wireless).

  Hope that helps.

• Cisco AnyConnect secure mobility Client - totally lost Newbie

  We currently have an ASA 5505 Firewall VPN configured services.  The system runs ASA Version 9.0.0 and ADSDM 7.0.2.  I installed the 'Cisco AnyConnect none mobility Client' Version 3.1.01065 on my PC to Windows 7 Ultimate.  When I try to connect to my VPN service I ge the following message is displayed:

  Security Warning: no reliable VPN server certificate!  AnyConnect cannot check the VPN server: XXX.XXX. XX. XX

  Certifiate does not match the name of the server

  Certificate comes from an untrusted source.

  Certificate is not identified for this purpose.

  Without buying a certificate from a 3rd party provider, is it possible to record a 'self' generated by certificate to get rid of this message?  If so, are there any "detailed" (e.g., simplified or not in the language of Cisco-eeze) instructions on how to configure the firewall to 'push' the certificate to the VPN client, so the message doesn't look for the user?

  I can have wrongly assumed your never worked WHAT VPN remote access.

  By comparing your error message with that I get when I tell my client to block connections to untrusted servers shows I get a unique, different warning screen (below). I suspect you may have more than just the question aside customer. You can share your configuration?

  

• Failed to download or run the customer of Cisco Anyconnect secure mobility

  I'm trying to download and install the VPN client on my laptop to access my work computer.  I tried the automatic online download and received this error:

  "Cannot install the Client AnyConnect Secure Mobility Client 3.1.00495 with the Installer error: incorrect function."  A VPM connection cannot be established. »

  I also tried the manual download, but my computer won't run the executable.  I'm running on Windows 7 64 bit.  Any help would be appreciated.

  You can try the fix below.  The user made the same mistake.

  https://supportforums.Cisco.com/discussion/11916796/AnyConnect-secure-mobility-client-3100495-Installer-error

  "I was able to install the client correctly by creating a new temporary user account and uses this account to install the client on a global scale on the machine. After successful installation, remove the temporary user account. It worked for me and it was easy. It may not work for all instances of this issue. »

  I hope this helps.

  Please evaluate the useful messages.

  Thank you.

• Cisco AnyConnect client mobility & VPN Site to Site

  Hello friends,

  I have question about on an ASA VPN services.

  Can an ASA alone to accommodate both VPN - Remote Access & Site to Site IPSec (L2L) AnyConnect?

  Except the license, there are all the points to be considered while hosting them both on the same device.

  Thanks in advance.

  Krishna

  Hello

  You can deploy the L2L VPN and remote access VPN (Anyconnect) on the same ASA.
  There is no any precondition nonspecific to deploy them together too long you have the configuration and the correct licenses.

  In fact, most deployments have these 2 types of VPN at the same time used these days.

  Concerning
  Dinesh Moudgil

  PS Please rate helpful messages.

• Cisco Anyconnect Essentials License - What is it

  Hello community.

  I managed to install an ASA with Anyconnect. The Anyconnect client on my laptop works very well.

  But why now to buy a Cisco Anyconnect Essentials License, what exactly is this license?

  AnyConnect works fine without this license.

  But I can not connect with my IPhone with the Cisco Anyconnect for Iphone App. should I buy the Anyconnect for Mobile license and this license just for a single device or all devices. Because this license is really cheap. Cisco licenses normally are expensiv.

  Thank you and best regards patrick

  If you have not all AnyConnect Premium licenses, then you are limited to two simultaneous connections if you do not have the license of anyConnect Essentials. You are right, for i-devices (and Android...) you need the AnyConnect Mobile license.

  AnyConnect Essentials both AnyConnect Mobile are approved by ASA, not user connections. And AnyConnect Mobile needs AnyConnect essential or Preimium AnyConnect license must be activated.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• ACLog.dll missing killing Cisco Anyconnect Secure Mobiltiy customer

  I use 'Cisco AnyConnect Secure Mobility Client' on Windows 7 for a year now with no problems.
  All started yesterday when I try to connect I get this error message:

  dialog title: vpnui.exe - system error

  message: "the program can't start because aclog.dll is missing on your computer.  Try reinstalling the program to fix this problem. »

  So, of course, I tried to reinstall, but without success.

  I keep reading that aclog.dll is a windows system dll.
  No idea how to solve this problem?

  I installed Visual Studio SP1 of 2015, the other day and it looked like there were a few errors in the final dialog box.  Would he have the issue?

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Cisco AnyConnect "RSPC not enabled."

  Hello!

  I configured an AnyConnect VPN (IPSec) on a Cisco ASA firewall, but I can't download the profile that neither could not connect to the security gateway by downloading the profile manually on my pc to the path C:\Users\%user%\AppData\Local\Cisco\Cisco AnyConnect Secure Mobility Client.

  I used already AnyConnect installed from an another security gateway and everything works correctly by the bridge, but the moment where that I tried to install the new security gateway AnyConnect (uninstalled the older first), I can not connect more to the old security gateway get the same error of the new.

  The version of installed AnyConnect is "anyconnect-victory - 3.1.01065 - k9.pkg. By AnyConnect mobile, I can connect without any problems.

  Any suggestion?

  Thanks to for the support anyway.

  Luigi Celeste

  Try to put a more recent client AnyConnect on your ASA.

• AnyConnect Secure Mobility - disable the auto launch at the connection

  Hello

  I recently put the hands on the last client of v3.1.01 Secure VPN mobility.  We are upgrading the former client anyconnect 2.4 there are many changes that is catch us by surprise.

  The biggest problem I have right now, it's the new mobility VPN starts automatically when a user logs into a machine.  We would like to disable this connection automatic/launch.  With the former client 2.4 we simply disabled the AnyConnect Service in Services.msc default and it starts when a user is ready to connect.

  Any suggestions on how to do it?

  John,

  I'm sorry, I missed actually version "3.1".

  To disable the "AutoConnectOnStart" Please add the previous piece of code to the XML profile:

  fake

  The XML profile is located in the following path:

  The directory path of the BONE

  Windows 7 and Vista

  C:\ProgramData\Cisco\Cisco AnyConnect secure mobility Client\Profile\

  Windows XP

  C:\Document and Settings\All Users\Application Data\Cisco\Cisco AnyConnect secure mobility Client\Profile

  Mac OS X and Linux

  / opt/cisco/anyconnect/profile /.

  I enclose you an example of the XML profile.

  Additional information:

  Auto Connect on start now disabled by default

  HTH.

  Portu.

  Please note all useful posts

  Post edited by: Javier Portuguez

• Delete the profile of AnyConnect secure mobility Client for Windows

  Hello

  My Cisco AnyConnect Secure Mobility Client for Windows (Version 3.1.04063 in fact) has stored some Clientprofiles. How can I remove one of these profiles if I do not need more?

  I already searched the registry and the file system but without success. I don't know where this information is stored.

  Any suggestions?

  Thank you

  They are individual xml files in a hidden directory. The location on Windows 7 is:

  C:\ProgramData\Cisco\Cisco AnyConnect secure mobility Client\Profile

  The complete inventory of their storage location for various operating systems can be found in the Guide of Administration AnyConnect.

• Cannot connect AnyConnect Secure Mobility Client IPSec 3.0

  Hello

  Our company has a configuration of IPSec VPN on a Cisco ASA 5505.  We previously using the Cisco VPN Client - Version 5.0.07.0410.  Everything worked well with this customer to date.  The problem is it is not supported in our Virtual Machine, and environment with our new version of our networks paravirtualized drivers we get the problems of inadequacy HMAC and not connect to.

  I created a file .pcf with the following information for the 5.0.07.0410 customer:

  Input connection: VC VPN

  Description: no

  Host: xxx.xxx.xxx.xxx (IP address of the Interface of the ASA VPN)

  Authentication group:

  • Name: The name of the Group
  • Password: password for pre-shared Key

  Transport:

  • Activate Transport tunnel
  • IPSec over UDP (NAT/PAT)

  I import the .pcf file in the client, the client connects, you are prompted for AD username - everything has worked well.

  We have currently met that he had to use the Cisco AnyConnect Secure Mobility Client (3.0.0629) - I tried to use the profile for that AnyConnect client editor and I can't not all profile options.  I leave all the defaults preferences (Part1), preferences (Part2), backup servers, matching certificate, Certificate Enrollment and the mobility policy.

  I in the list of servers, click Add.  I enter in the hostname, host (the host name IP address) address and group.  There are no backup servers, I change the main IPSec protocol, save the profile and place it in C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile (Win7).  Open the AnyConnect Secure Mobility Client and the profile is loaded. Trying to link returns "VPN Agent is unable to establish a connection."  ASA, I don't even see a connection attempts to the outgoing IP address.  On the client, I can ping the ASA and connect with ordinary VPN Client.

  I can't find a place to enter a pre-shared in the profile editor.

  The AnyConnect client seems also not to read the .pcf files.  Am I missing something here?

  My package DART from the failing client is attached.  Any help would be greatly appreciated!

  Kind regards

  Rich Alto

  Rich,

  AC uses IKEv2 (for IPsec) which is not yet supported on SAA. Support is planned for 8.4 ASA which is still at least a few weeks.

  HTH

  Herbert

• AnyConnect and Mobile devices

  Hello

  is there a way to limit the AnyConnect profile only to mobile devices (Android, iPad, etc.)?

  We have AnyConnect active mobile license but I would like to create a profile Anyconnect to allow only the mobile device to use. I have other profiles AnyConnect available for laptops, etc.

  Appreciated.

  Yes, you can use a dynamic access policy to drop connections using your mobile profile AnyConnect not using a specific AnyConnect client.

  

• Cisco Anyconnect mobile licenses

  Hello

  We need to buy 1200 anyconnect Apex licence, I read the ordering guide

  for anyconnect but he's confused, I have to mention that we have 2 ASA 5545 - X in cluster mode,

  I don't know how to order. It's the way that I think is true, but I'm not sure.

  part number                                                   Qty

  ----------------------------------------------------------------------

  L AC-APX-5 YR-G AC-APX-5 YR - 1 K - S 1

  L AC-APX-5 YR-G AC-APX-5 YR-100 S 2

  Thank you.

  It would be OK for a 5 years AnyConnect Apex for 1,200 users license.

  Note the Mobile feature is included with Apex or Base Anyconnect 4.x licenses.

• Installing AnyConnect Mobile licenses

  I want to clarify how exactly a Cisco AnyConnect Mobile license is applied to an ASA. Does as a PAK and then a license key is created? Y at - it a separate to enter specifically for the mobile command?

  The mobile license was delivered as a PAK who was converted into a license key.

  But today, you buy the mobile license more, instead you buy 4 AnyConnect more or APEX which includes the mobile service.

  If you already have Essentials or premium, you can get the license migration until the end of the year.