Cisco HX system connection vSphere Client Web show error internal

Similar Questions

• Server.getCredential () and vSphere client web 5.5.0b

  When connected customer orchestrator Server.getCredential () returns an object of the current user's credentials... However, if you run this method in a workflow from the web client, it does not seem to pass through and you end up with a null value.

  Anyone else see this issue?

  See you soon,.

  When you lo in vCO customer, you provide a user name and password, one internally, this is represented by an object of type UserToken

  When you run a workflow of vSphere Web Client, it calls the REST API of vCO not passing the name user and password, but token SSO - one object of type SamlToken. In this case, there is no available password so we cannot construct the appropriate UserToken object. That's why this particular API returns null.

  If you must pass the name of user and password to your technical workflow of customization and want to be able to invoke this workflow from vSphere Client Web - it is impossible to do, because there is no way to get the password of the user logged into vSphere Web Client. You can only get the user name.

• Saving a vCenter Server in vSphere Client Web (5.5)

  Hello

  I was wondering if it is possible to save multiple vCenter servers (all vCenter Server devices) with a single instance of vSphere Web Client that runs on one of these devices to vCenter?

  VCSA1 > use built in Web Client to manage all vCenter servers.

  VCSA2 > register with VCSA1.

  VCSA3 > register with VCSA1.

  I find no 5.5 specific information but what I've read I think it's possible on 5.1. The ' admin - cmd.sh' script does not seem to be present in my 5.5 VCSA however.

  VSphere Documentation Centre

  The Server system, a device to vCenter Server vCenter is pre-recorded with the vSphere Client Web inside the unit. To register for another system of vCenter Server with the vSphere Client Web installed as part of a vCenter Server Appliance, you must use the admin-app script from the command line rather than the Web-based administration tool.

  vCenter Infrastructure Navigator 5.7 Documentation Center

  /usr/lib/VMware-vSphere-client/scripts/Admin-cmd.sh register https://WebClient.mydomain.com:9443 / vsphere client Director of VC.mydomain.com 'CENSORSHIP'

  Thanks for any help.

  The admin app is no longer available with vCenter 5.5. If you register all the vCSA to a SSo central, they will all see the place in the web client unique management this SSO Server vCenter.

• Suite of spring and vSphere Client Web plugins

  Hi, I'm new to this environment.  I'm developing VMware vSphere Client Web plugins.  Installing vSphere Web Client plugins, it is stated that favorite tools include Suite of spring, which is a derivative of the eclipse.  It is an optional component to use the tool, FlashBuilder.  Eventually, the VMware documentation states that you can use Eclipse instead of the spring tool Suite, but different configuration is necessary.

  I write here (instead of VMware/AST) for the following reasons.  I am able to set up the environment without the tool, FlashBuilder.  I am able to develop plugins Web Client without the tool, FlashBuilder.  However, I believe that the FlashBuilder tool will facilitate the development.  When I try to get the FlashBuilder to load, I get no longer things to work; I can't develop plugins Web Client.  Finally, the FlashBuilder tool is the only piece of the puzzle that is a licensed product, and therefore, I won't be able to buy the product if I can't get the trial version to work.

  FlashBuilder has an installer of plugin for Eclipse.  I tried to install the plugin following spring tools, and I tried to install the plugin in a regular version of the eclipse.  In both cases, the problem I encounter is that I cannot locate VMware files and does not have the Virgin service which is present when I didn't have the plugin installed FlashBuilder.

  Someone has no experience or knowledge in FlashBuilder getting to work in this type of installation?  Clearly, it's doable, but using all the documents that I can find online, I can't FlashBuilder work in my environment.

  Thanks for any help or suggestion you may have.

  You should post questions Flash Builder Flash Builder Forum.

  http://forums.Adobe.com/community/flash_builder?view=discussions

• VSphere client web - Remote Console error: unable to connect to the connection of mks (name of user and password) incorrect

  Hello

  I am running vmware Fusion on my mac computer. I created a domain with 2 vm ESXI, VSPHERE client and a DC inside the merger. My mac is not inside the area, but can access the area through clearOS router which is also inside the virtual machine. my mac has IP 192.168.2.x and my management in the 10.0.0.x field segment

  When I try to access a virtual machine on my esxi from my mac, I get the error failed to connect to the connection of mks (name of user and password) incorrect. I guess it has something to do with my mac is not in the area, but no idea how I can solve this problem?

  Thank you

  solved by adding the ip address of my ESXI in my macs hosts file

• Error installing vSphere client web 29700

  Hello

  When I run the vCenter Server 5.5 Update 1 installation on Windows Server 2012 Standard, I have an error at the stage of the vSphere Web client. The error is "error 29700. Clean the additional files for Log Browser failed. Please check vminst.log in the temporary folder of the system for more details. »

  In vminst.log, the associated line are:

  VMware vSphere Web Client-build-1441075: 02/04/14 18:22:33 exec - CA: VMLogBrowserCleanUp

  VMware vSphere Web Client-build-1441075: 02/04/14 18:22:33 Getting CustomActionData property = C:\Program Files\VMware\Infrastructure\vSphereWebClient\logbrowser\

  VMware vSphere Web Client-build-1441075: 02/04/14 18:22:33 did not find any child files or directories to C:\Program Files\VMware\Infrastructure\vSphereWebClient\logbrowser\, (5)

  VMware vSphere Web Client-build-1441075: 02/04/14 18:22:33 failed to remove directory, error 5

  VMware vSphere Web Client-build-1441075: 02/04/14 18:22:33 ERROR: cannot remove C:\Program Files\VMware\Infrastructure\vSphereWebClient\logbrowser\.

  VMware vSphere Web Client-build-1441075: 02/04/14 18:22:33 showing the error message 29700

  The logbrowser directory is created during installation, but the process deletes the directory vSphereWebClient and pop up this error.

  Simple or custom installation doesn't change anything so I tried installing vCenter Server 5.5, same error.

  Someone at - it had the same error?

  The problem has been resolved. To solve it, I changed my OS language in the United States (in English) and installation work.

• questions of vSphere Client Web - (noob)

  Hello! I'm not sure if this question goes here or not, if not could someone move it to the right forum? Thank you

  IM pretty new to VMWare, but have a number of hosts running ESXi 4 and 5.0, each is a separate host managed by the vSphere client. We recently received a new server and installed ESXi5.5 to findout we vSphere Web Client to manage the virtual machines. My question is can I use a web client of vSphere to monitor multiple physical hosts?

  Our facility is 4 physical hosts all versions the ESXi running, all independent - nothing fancy. We also have a San with two physical hosts in a cluster off site in another data center (a different IP address connected via WAN). This host is configured with the Id like to, at least temporarily, where I want to manage the new vSphere web ESXi5.5 Server client. Is this possible? I get errors when adding it.

  Thank you!

  You can manage everything from a single Web Client vSphere since all hosts are added to vCenter and hosts are compatible with your server vCenter... you must ensure all the required ports are open through your WAN link. To configure a new Web Client vSphere you still need a compatible version of vCenter.

• No Manager of NSX in vSphere client Web

  Hello.

  I installed and used NSX Manager 6.1 for several days. Even had some time to install and configure the controller of the nsx.

  A few days later I lost NSX Manager in vSphere client to web.

  I restarted NSX Manager several times without success.

  NSX Manager point of view, it seems to be ok.

  I am login as [email protected].

  Where can I start troubleshooting?

  All advice please!

  Thank you!

  Reregister the Lookup service and vCenter server NSX Manager.  (re-enter the information again)

• vSphere Client Web - VM not found after add to the inventory

  Hello!

  We use device and Web Client Version 5.5.0 Build 1750785 vSphere vCenter.

  Machine virtual VM1 in the resource POOL1 pool configured on cluster1. DRS on in manual mode.

  I create user USER1 in AD with no privileges and allow it to turn on VM1. (User1 is a member of the Group GROUP1 and power on permission set GROUP1 POOL1 level.)

  Everything works very well.

  After I have remove the inventory VM1 and add to the inventory again.

  Then I login to vSphere Web Client with the User1 credentials and try to power on VM1, but get error not found "VM".

  I relog to vSphere Web Client with administrative rights and try to turn on VM1. VM1 on successfully.

  I check the permission for User1 on VM1. Everything was ok.

  Can I use vSphere Client Version 5.5.0 build 1746248 (not web) to USER1 qualifications and try to turn on VM1. VM1 lit with success!

  But I need User1 to power on VM1 from WebClient.

  Do you have any suggestions?

  Thank you

  later I try to adjust the power on the authorization of USER1 (VM1), level of the virtual computer object. VM1 on WEB Client successfully!

  But I have put on leave at POOL1

  Yes, you are right.

  I solved the problrem. Thank you.

  After re - add to the discovered inventory updated VM1 on virtual machine file.

  I put read-only role in GROUP1 without spread on discovered virtual machine folder.

  VM1 powered with success on the web client and the vSphere Client.

• you see only not lacp in vsphere client web

  I do not see the lacp seting in vsphere client of web

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2034277

  the WIS is 5.1 and the host is 5.1. vCenter is also 5.1

  Nevermind I found it now. Thank you

• A tree inventory implemented in vSphere client web 5.1 does

  Hello

  I develop a vsphere client 5.1 web plugin.

  I need to implement the inventory tree in my plugin. The documentation guide and programming example speaks on the list of entities as the 'inventory' and not a hierarchical (tree inventory), as shown in the snapshot below.

  I've traveled "vSphere Web Client Extensions for vSphere 5.1 Programming Guide" and samples provided as "chassis-ui", but don't find anything (point/api extension) to view vsphere/custom entities in a hierarchical manner, as seen in vcenter section on the web client.

  Is it possible to display the objects tree in vSphere web client plugin?

  

  No, it is not possible to add your custom in the inventory tree in the left objects.  Our user interface will further hierarchical display of items because it is not scale upward (we left the inventory tree in this version to help people make the transition :-)

  Of course, you can create your own Flex Tree component to display what you want in your own opinion.

• vRealize Operations Manager vSphere Client Web plugin does not work!

  Hi guys, I'm updating my environment Operations Manager vRealize and after that, I do not see the Web Client vSphere health status information. I followed the Migration to vRealize Operations Manager 6.0 Tutorial available in VMware Youtube channel and after change my TIME on the new server vRealize Operations Manager 6.0 Operations Manager 5.8 vCenter vCenter Operations Manager always direct plugin to my old Operations Manager vCenter VAPP environment.

  Error message:

  Unable to connect to the server vCenter operations. Check your network connection and the execution state of the virtual machines in the vCenter Operations Manager VAPP.

  Anyone know how to change the vCenter Operations Manager plugin to my new environment?

  Look at the screenshots to understand my problem.

  Thank you buddy. In fact, I had to do to solve the problem, but I removed the previous configuration before. I had to open https:///mob, locate the old configuration of Operations Manager 5.8 vCenter in content, ExtensionManager and UnregisterExtesion "com.vmware.vcops". After that, I did the same way as you have said and done! Thanks for your help.

• Problem connecting vSphere client to a host ESX or ESXi to

  I have tried with an ESXi host so an ESX host.  I spent the installation on a square between hypervisors, as well as to try on another box.  I have redownloaded the two hypervisors and check that they match checksums, I reinstalled the customer charge downloads of both vSphere host as well as the www.vmware.com/downloads.

  Whenever I try to connect to a host, I get the same error.  First of all, I get:

  Error analysis of the file "clients.xml" Server "192.168.2.195".  Logon will continue, contact your system administrator.

  After clicking on OK, I get this error:

  The initializer for type for 'VirtualInfrastructure.Utils.HttpWebRequestProxy' threw an exception.

  I would appreciate a suggestion or an explanation of what is the question.

  Thank you!

  edited for spelling.

  This is not a problem with the server on the host, there more IE7 problem. Check the 1011329 of Vmware KB

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1011329&sliceId=1&docTypeID=DT_KB_1_1&dialogID=27182245&StateID=1%200%2027180582

  AM,

  If you have found my reply to be useful, feel free to mark it as useful or Correct.

  The latest articles and articles about Virtualization:

  http://communities.VMware.com/blogs/amodi

  http://vsolutions.compare2shop.com

• QueryResultNotFoundException was lifted when a workflow is called in vsphere client web and select a cluster

  Hello

  I use vsphere vCenter 6.0 and 6.0 Orchestrator vRealize. I save the vRO the vCenter in web client vRealize Orchestrator plugin.

  VRO 6.0 here is a "Add host to cluster" workflow under vCenter-> Host-> check management. I have add this workflow in the web client, so that I can call him when I right-click on a cluster.

  

  I run this workflow and select a cluster in the first stage, and click Next. An error like this:

  com VMware.o11n.Sdk.QueryService.QueryResultNotFoundException: could not find the object of type 'VC:ClusterComputeResource' with the id 'WIN-VCENTER6.MYDOMAIN.COM/domain-c28 '.

  

  I tried a few other env but get the same error. I also tried 5.5 and 5.5 vCO vCenter, and it worked fine.

  Does anyone know if this is a bug or if I can avoid this error by configuring my env? Thanks in advance.

  Kind regards

  Vicky

  Hi Vicky,

  When you have configured the server vCenter by vRO (using 'Add a vCenter server instance' the workflow), how did you address vCenter server - as an IP (for example. 10.20.23.34) or as a fully qualified hostname (eg. WIN-VCENTER6. MYDOMAIN.COM)? Please make sure that it was the last; If you have added your vCenters vRO using IP addresses or short host names, there might be a few problems, so you need to de-register the vRO vCenter and add them again.

• Access to the VCO rest api vsphere Client Web plugin

  Hello

  I want access to vco rest api vsphere Web Client plugin. I know I can find key holder in UserSession object but I failed generate the Authorization (especially the signature part) header. I'm trying to generate the authorization as described in the message header . But still get the signature verification failed. I can't use java sdk to rest because the user credentials not available for the plugin.

  Could someone help?

  Hello

  Here are a few snippets of the existing plugin that communicates with the vCO using the REST API.

  Please let me know if that is enough or you need something more.

  import java.security.PrivateKey;
  import com.vmware.vim.sso.http.AuthCalculator;
  import com.vmware.vim.sso.http.AuthCalculatorFactory;
  import com.vmware.vim.sso.http.SignatureAlgorithm;
  import com.vmware.vise.vim.security.sso.SsoService;
  
  httpRequest.addHeader("Accept-Language", locale.toString().replace('_', '-'));  // Not sure if this is related
  
  PrivateKey keyPair = ssoService.getHokPrivateKey();  // You should have this already
  SamlToken samlToken = ... // You should have this already
  String currentToken = samlToken.toXml();
  
  String[] token = null;
  if (keyPair != null && currentToken != null) {
     AuthCalculator calc = AuthCalculatorFactory.instance(SignatureAlgorithm.RSA_SHA256);
     token = calc.computeToken(request, keyPair, currentToken);
  }
  
  if (token != null) {
     for (int i = 0; i < token.length; i++) {
        httpRequest.addHeader("Authorization", token[i]);
     }
  }
  

  Try it and let me know if you have any questions.