Cisco IOS VPN Site to Site use SHA2 interoperability with Swan

Similar Questions

• Cisco 877 + VPN Site to Site

  Hello

  I'm new im this forum.
  I've set up a Site VPN site with 2 Cisco 877.

  SITE A:

  Address IP Adreess public: static
  Internal IP Adrees: 192.168.0.XXX
  Mask: 255.255.255.0

  SITE B:

  IP address public Adreess: Dynamics
  Internal IP address: 192.168.2.XXX
  Mask: 255.255.255.0

  I managed to do a ping on both sides, but I can't access file shares, and could rdp on any server in site A, by the internal IP address.

  Fix, is the SITES A and B SITE startup configs.

  Could you please someone help me?

  Hi Marcos,

  Really happy to know that the problem is solved. There is no need to apologize. Please mark this message as answered if there is nothing more.

  Rregards,

  Assia

• Cisco ASA VPN Site to Site WITH NAT inside

  Hello!

  I have 2 ASA 5505 related to IPSEC Tunnel VPN Site to Site.

  A 192.168.1.0/24 'remotely' inside the network and a local "192.168.200.0/24' inside the network (you can see the diagram)

  The local host have 192.168.200.254 as default gateway.

  I can't add static route to all army and I can't add static route to 192.168.200.254.

  NAT the VPN entering as 192.168.200.1 or a 192.168.200.x free to connect my host correcly?

  If my host sends packet to exit to the default gateway.

  Thank you for your support

  Best regards

  Marco

  The configuration must be applied on the SAA with the 192.168.200.0 subnet it is inside, there must be something like this:

  permit 192.168.1.0 ip access list VPN_NAT 255.255.255.0 192.168.200.0 255.255.255.0

  NAT (outside) X VPN_NAT outside access list

  Global (inside) X Y.Y.Y.Y (where the Y.Y.Y.Y) is the ip address

  If you have other traffic on the vpn through the tunnel that requires no nat, then you must add external nat exemption rules since these lines above obliges all traffic through the asa to have a nat statement.

  See if it works for you, else post your config nat here.

• Cisco Asa vpn site-to-site with nat

  Hi all

  I need help
  I want to make a site from the site with nat vpn
  Site A = 10.0.0.0/24
  Site B = 10.1.252.0/24

  I want when site A to site B, either by ip 172.26.0.0/24

  Here is my configuration

  inside_nat_outbound to access ip 10.0.0.0 scope list allow 255.255.255.0 10.1.252.0 255.255.255.0

  tunnel-group x.x.x.x type ipsec-l2l
  tunnel-group ipsec-attributes x.x.x.x
  pre-shared-key!

  ISAKMP retry threshold 10 keepalive 2

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  card crypto outside_map 2 match address inside_nat_outbound

  card crypto outside_map 2 pfs set group5
  card crypto outside_map 2 peers set x.x.x.x

  card crypto outside_map 2 game of transformation-ESP-AES-256-SHA

  NAT (inside) 10 inside_nat_outbound

  Global 172.26.0.1 - 172.26.0.254 10 (outside)

  but do not work.

  Can you help me?

  Concerning

  Frédéric

  You must ensure that there is no NAT 0 ACL statement because it will take precedence over the static NAT.

  You don't need:

  Global 172.26.0.1 - 172.26.0.254 10 (outside)

  NAT (inside) 10 access-list nattoyr

  Because it will be replaced by the static NAT.

  In a Word is enough:

  nattoyr to access ip 10.0.0.0 scope list allow 255.255.255.0 10.1.252.0 255.255.255.0

  access extensive list ip 172.26.0.0 vpntoyr allow 255.255.255.0 10.1.252.0 255.255.255.0

  public static 172.26.0.0 (inside, outside) - nattoyr access list

  card crypto outside_map 2 match address vpntoyr

  card crypto outside_map 2 pfs set group5

  card crypto outside_map 2 defined peer "public ip".

  card crypto outside_map 2 game of transformation-ESP-AES-256-SHA

  outside_map interface card crypto outside

  tunnel-group "public ip" type ipsec-l2l

  tunnel-group "public ip" ipsec-attributes

  pre-shared key *.

  -Make sure that it not there no NAT ACL 0 including the above statements and check if NAT happening (sh xlate) and the

  traffic is being encryption (sh cry ips its)

  Federico.

• Cisco ASA vpn site to site with access internet, error

  Hello

  I have two offises, Central and removed, with the external IP addresses. They are connected to the site to site vpn, LAN works fine, then NAT is disable, but then there is no internet access, then I Internet in NAT is working well, but then there is no access to the local network.
  Where would be the problem?

  There's config:

  ASA Version 8.4(4)1
!
hostname SalSK-ASA
domain-name ld.lt
enable password xxx encrypted
passwd xxx encrypted
names
!
interface Ethernet0/0
 nameif outside
 security-level 0
 ip address 81.X.X.X 255.255.255.0
!
interface Ethernet0/1
 nameif inside
 security-level 100
 ip address 192.168.204.254 255.255.255.0
!
interface Ethernet0/2
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Ethernet0/3
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Management0/0
 shutdown
 no nameif
 no security-level
 no ip address
!
ftp mode passive
clock timezone EET 2
dns server-group DefaultDNS
 domain-name lietuvosdujos.lt
object network LAN
 subnet 192.168.204.0 255.255.255.0
 description Local Area Network
object network LD_Lanai
 subnet 192.168.0.0 255.255.0.0
 description LD lanai
access-list inside_access_in extended permit ip any any
access-list outside_access_in extended permit ip any any
access-list vpn extended permit ip any 192.168.204.0 255.255.255.0
access-list vpn extended permit ip 192.168.204.0 255.255.255.0 any
access-list vpn extended permit ip object LD_Lanai 192.168.204.0 255.255.255.0
access-list vpn extended permit ip 192.168.204.0 255.255.255.0 object LD_Lanai
access-list outside_cryptomap_1 extended permit ip object LAN any
access-list outside extended permit ip any any
pager lines 24
logging enable
logging list VPN_events level informational class auth
logging list VPN_events level informational class vpdn
logging list VPN_events level informational class vpn
logging list VPN_events level informational class vpnc
logging list VPN_events_ID message 713120
logging list VPN_events_ID message 713167
logging list VPN_events_ID message 602303
logging list VPN_events_ID message 713228
logging list VPN_events_ID message 113012
logging list VPN_events_ID message 113015
logging list VPN_events_ID message 713184
logging list VPN_events_ID message 713119
logging list VPN_events_ID message 602304
logging monitor debugging
logging buffered debugging
logging trap VPN_events_ID
logging asdm informational
mtu outside 1500
mtu inside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source dynamic LAN interface inactive
access-group outside in interface outside
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 81.7.77.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server ISE protocol radius
aaa-server ISE (inside) host 192.168.200.48
 key *****
user-identity default-domain LOCAL
aaa authentication enable console ISE LOCAL
aaa authentication http console ISE LOCAL
aaa authentication serial console ISE LOCAL
aaa authentication ssh console ISE LOCAL
http server enable
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set tripledes esp-3des esp-sha-hmac
crypto map outside_map 1 match address outside_cryptomap_1
crypto map outside_map 1 set peer 213.X.X.X
crypto map outside_map 1 set ikev1 transform-set tripledes
crypto map outside_map interface outside
crypto isakmp identity address
crypto ikev1 enable outside
crypto ikev1 policy 1
 authentication pre-share
 encryption 3des
 hash sha
 group 2
 lifetime 86400
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
management-access inside
threat-detection basic-threat
threat-detection statistics host
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 192.168.201.200 source inside prefer
webvpn
group-policy DfltGrpPolicy attributes
 vpn-tunnel-protocol ikev1 l2tp-ipsec
group-policy SalGP internal
group-policy SalGP attributes
 vpn-filter value vpn
 vpn-tunnel-protocol ikev1 l2tp-ipsec
username Admin password LVPpyc4ATztEAWtq encrypted privilege 15
tunnel-group 213.X.X.X type ipsec-l2l
tunnel-group 213.X.X.X general-attributes
 default-group-policy SalGP
tunnel-group 213.X.X.X ipsec-attributes
 ikev1 pre-shared-key *****
!
class-map global-class
 match default-inspection-traffic
!
!
policy-map global-policy
 class global-class
  inspect dns
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect ip-options
  inspect netbios
  inspect rsh
  inspect rtsp
  inspect sip 
  inspect skinny 
  inspect sqlnet
  inspect sunrpc
  inspect tftp
  inspect xdmcp
  inspect icmp
 class class-default
  user-statistics accounting
!
service-policy global-policy global
prompt hostname context
no call-home reporting anonymous
call-home
 profile CiscoTAC-1
  no active
  destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
  destination address email [email protected]/* */
  destination transport-method http
  subscribe-to-alert-group diagnostic
  subscribe-to-alert-group environment
  subscribe-to-alert-group inventory periodic monthly
  subscribe-to-alert-group configuration periodic monthly
  subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:d8c29755eff807b1530e38b9ead9edd5
: end

  Two things are here according to you needs.

  First you encrypt all the traffic on the network 192.168.204.0/24... do you intend to send all traffic on that subnet via the VPN? If this isn't the case, specify the remote subnet instead of using all the crypto ACL.

  object network LAN
 subnet 192.168.204.0 255.255.255.0access-list outside_cryptomap_1 extended permit ip object LAN any

  Second, you have not an exempt statement NAT so that encrypted traffic should not be translated.  This statement would look like the following:
  the object of the LAN network
  192.168.204.0 subnet 255.255.255.0

  being REMOTE-LAN network
  255.255.255.0 subnet 192.168.100.0

  Static NAT LAN LAN (inside, outside) destination static REMOTE - LAN LAN

  --

  Please do not forget to choose a good response and the rate

• Redundancy with double tis on cisco ASA VPN Site to Site

  Dear supporters,

  Could you help me to provide a configuration for the network as an attachment diagram.

  I am suitable with your help.

  Thank you

  Best regards

  Hi Sothengse,

  You can visit the below link and configure ASA @ head and Canes accordingly to your condition.

  You must change the configuration of the similar example with ends... Double TIS @ ends in your scenario...

  http://networkology.NET/2013/03/08/site-to-site-VPN-with-dual-ISP-for-BA...

  I hope this helps.

  Concerning

  Knockaert

• What VPN Cisco IOS VPN and RADIUS client?

  Hello community,

  My company are trying to set up the remote user VPN for all of our external collaborators to the help of our existing Cisco router and a RADIUS server in Active Directory.

  I did all the AAA config on the router and set up the RADIUS, but I do not know what customer buy Cisco Remote and how to set up.

  Anyone who knows this set upwards or it uses can be me help please we don't lose our money (and my boss time!)?

  Thanks in advance.

  Paul

  Paul,

  AnyConnect lets connect you using IKEv2/IPsec and SSLVPN for IOS network head.

  There are countless examples of configuration.

  Alternatively, some clients of IKEv1/IPsec 3rd party exists and are able to connect, however is those who are not TAC (Cisco) supported. You can check the feature called ezvpn

  M.

• How can I put a shortcut icon on my site using Firefox? With IE8, I right click and click on "create shortcut".

  I know very little about PCs and could use some guidance on this. I'm sure that it's really easy, but I can't find out how to do it.

                   Thank you
  

  See how to create a shortcut on the desktop to a Web site.

  There are a few modules that can help you with this, either the Creation of a shortened or deskCut add-on can add an option to create a shortcut for the context menu.

• Web site is now in the center of the page, built the new site using 'cc', but with some problems

  Hello all I said that I would stay with the new site and as well as I have one or two small issues, starting by!

  New Web site, rollover buttons with not color in place when you click

  And someone told me that it is a very good site, but do not show the images in the box with the yellow frame upwards unless I tilt the screen at a weird angle, I think he means the image of hero! and sounds

  as it uses a Tablet

  I built this website using the tutorial by David Powers l http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.htm sent to me by Hans-Günter

  I could have made one or two mistakes when creating this site, I take my hat off to you, the Web designers, it took me a week to build you could have dune in two hours lol

  Please can someone take a look and help me with problems who need a fix

  Thank you very much for your time

  It was the old site

  

  This is the new website

  

  The address is http://www.lawrenceg.com

  This is the code to the Index.html page

  <! doctype html >

  < html >

  < head >

  < meta charset = "utf-8" >

  < title > < /title > Home Page

  < link href = "styles/main.css' rel ="stylesheet"type =" text/css">"

  < style type = "text/css" >

  body, td, th {}

  color: #999999;

  }

  < / style >

  <!-the following script tag downloads a font of Adobe Edge Web server fonts to use in the web page. We recommend that you do not modify it.-->

  "< script src="jQueryAssets/jquery-1.8.3.min.js "type =" text/javascript"> < / script >

  < script >

  var __adobewebfontsappname__ = "dreamweaver".

  function MM_openBrWindow (theURL, winName, features) {//v2.0

  Window.Open (Theurl, winName, Features);

  }

  < /script >

  " < script src =" http://use.edgefonts.NET/source-Sans-Pro:N6, N2:default.js "type =" text/javascript"> < / script > "

  <!-[if lte IE 7] >

  < script type = "text/javascript" src = "js/html5shiv.js" > < / script >

  <! [endif]-->

  < / head >

  < body >

  < div id = 'wrapper' >

  < header id = "top" >

  < h1 > < img src = "images/contact_page - image_47.png" width = "43" height = "47" alt = "" / > My Studio < / h1 >

  < nav id = 'mainnav' >

  < ul >

  < li > < a href = "index.html" class = 'thispage' > home < /a > < /li > "

  < li > < a href = "About Lisezmoi.html" > about me < /a > < /li >

  < li > < a href = 'Work.html Studio' > work in Studio < /a > < /li >

  < li > < a href = 'The Gallery.html' > The Gallery < /a > < /li >

  < li > < a href = "Us.html of Contact" > contact us < /a > < /li >

  < /ul >

  < / nav >

  < / header >

  < div id = 'Heroes' >

  < section >

  < h2 > < / h2 >

  < H2 > welcome to my workshop! < / h2 >

  < p > my name is Lawrence; I'm a photographer & amp; Photographic artist < /p >

  < p > I have kept this site simple and to the point with no unwanted useless stuff, we have a system of full navigation for your wedding rings at the top if you do not have to keep coming back to the home page every time, check us on < a href = "#" onClick = "MM_openBrWindow ('https://www.facebook.com/LawrencesPhotoStudio ',' Facebook ',' location = yes, scrollbars = yes wid th = 1200)" (, height = 600') "> Facebook < /a > < a href =" # "onClick =" MM_openBrWindow ('https://twitter.com/Lawrencegtraing ',' Twitter ',' location = Yes, scrollbars = yes, width = 1200, hei ght = 600') "> Twitter < /a > < a href =" # "onClick =" MM_openBrWindow ('http://www.flickr.com/photos/lawrenceg/ ',' Flickr location ',' = yes, scrollbars = yes, width = 1200, height is 600') "> Flickr < /a > < /p > "

  < / item >

  < img src = ' home_page - image.jpg "alt ="image of the studio homepage"/ > < / div >

  < section id = 'hand' >

  < h2 > this site works best in internet explore! < / h2 >

  < p > you can always use firefox and google chrome if you want, this site looks a little better when displayed in internet explore. < /p >

  < p > if you decide to buy all our prints, framed or canvas prints! < /p >

  < p > all comes with 30 day money back guarantee guarantee and is sold through our secure payment site < a href = "#" onClick = "MM_openBrWindow ('http://lawrence-graves.artistwebsites.com/ ',' FineArtAmerica ',' location = yes, scrollbars = yes, width = 1000, height is 600')" > Fine Art America! < /a > < /p >

  < p > so, how can we help you, you are looking for something a little special to hang on your wall, perhaps you have a family to come a meeting < a href = "#" onClick = "MM_openBrWindow ('http://weddindimages.blogspot.co.uk/',",' location = yes, scrollbars = yes, width = 1000, height = 80 0') "> wedding or an important party < /a > as a new addition to the family? < /p >

  < p > maybe you think that < a href = "#" onClick = "MM_openBrWindow ('http://childrensphotography2013.blogspot.co.uk/ portraits ',' ',' location = yes, scrollbars = yes, width = 1000, height is 800')" > special portrait of children < /a >, in order to capture a moment in time can be invaluable and don't forget your < /p > baby's first portrait

  < p > < a href = "#" onClick = "MM_openBrWindow ('http://petsimages2013.blogspot.co.uk/ ',' animals ',' location = yes, scrollbars = yes, width = 1000, heig ht = 800')" > what our pets < /a > after all what they are part of the family too! < /p >

  < p > sometimes we need a photographer to capture a very special moment, but to capture the excellence you need of an artist who can produce the results you are looking for < /p >

  < h2 > working with Photoshop! < / h2 >

  < p > sometimes your standard photographer in not right for some assignments and you need professional image editing services, check these examples below < /p >

  < p >

  < side class = "floatleft" > < a href = "#" > < img src = "images/The_art_of_alteringan_image_SMALL.jpg" alt = "working in photoshop" width = "200" height = "140" onClick ="MM_openBrWindow (' images/The_art_of_alteringan_image.jpg', 'photoshop1 ',' location = Yes, scrollbars = yes, width = 1040, height is 740')" / > < /a > < / side > "

  < /p >

  < p > side view aside, take a look at this image! This was photographed on a rooftop of the apartment on the island of Kos, Greece, when the Sun was high at about 14:00 on a very hot day. As you can see there are things that need to change in the image on the left, we had only one or two small changes! to activate this drad look image in beautiful photo! < /p >

  < p > < / p >

  < h2 > digital horizons with layer cache < / h2 >

  < p > what is a new layer digital background for this special image that needs a complete makeover! < /p >

  < p >

  "< side class ="floatleft"> < a href =" # "> < img src ="images/pets_small1.jpg"alt ="Pet Photography"width ="200"height ="140"onClick =" MM_openBrWindow ("images/pets_large1.jpg ',' PetPhotography ',' location = yes, scrollba rs = yes, width = 1060, height is 720')" / > < /a > < br >

  < / side >

  < /p >

  < p > check out it! This consisted of one of our Pet photography photo shoots we have done in 2011 for one of our customers, that they wanted both dogs in the same picture, but some dogs do not want to play. So we photographed and then separately to the angle that we wanted, so they would be present in the new digital background! < /p >

  < p > < / p >

  < p > these are some of the adjustments and improvements we can do, you can find more examples of our editing inside the work studio page! < /p >

  < p > < / p >

  < p > < / p >

  < / item >

  < id side = "sidebar" >

  < h2 > check out our gallery!

  < / h2 >

  < p > you can check out some of our work in the Gallery, loves animals, then check out some of our animals wild black and white images, portraits and photography pet < /p >

  < h2 > free reviews and tutorials! < / h2 >

  < p > you can find some camera and lens customers, more tutorials Photoshop and photography on the Facebook pages and Twitter < /p >

  < h2 > visit our store! < / h2 >

  love Art, check out < p > < a href = "#" onClick = "MM_openBrWindow ('http://lawrence-graves.artistwebsites.com/',",' location = yes, scrollbars = yes, width = 1000, hei ght = 600') "> Fine Art America < /a > < /p >

  < p > each purchase includes a money back guarantee! < /p >

  "< div class ="floatleft"id ="figcaption"> < a href =" # "> < img src ="Images/What_you_looking_at_small.jpg"alt ="Birds of prey"width ="200"height ="136"onClick =" MM_openBrWindow ("images/What_you_looking_at.jpg ',' BirdOfPrey ',' location = yes, llbars = yes, width = 1060 CORS, height is 730')" / > < /a > < / div >

  < p align = "left" > This is one of the many images, we have to sell, you can choose print, framed print or a canvas we also sell metal printing, acrylic, iphone greeting cards and galaxy phone case too! < /p >

  < h2 align = "left" > Photo restoration work! < / h2 >

  < p align = "left" > we do also some digital photo restoration work; restore the old black and white! Remove any unwanted photos and much more! < /p >

  < h2 > new sets of digital background! < / h2 >

  < p > Our Digital Background Sets will come with complete coverage in a layer, set of images and more < /p >

  < p > each set will come with a video tutorial showing you how to use these fabulous games with your own images < /p >

  < p > set to be launched in 2014 < /p >

  < p > or if you prefer, you can simply send us your pictures and let us do the work for you < /p >

  < p > we charge only a small fee for this service! < /p >

  < p > < / p >

  < / side >

  <>footer

  < p > & copy; Copyright 2013 my studio to lawrenceg.com < /p >

  < / footer >

  < / div >

  < / body >

  < / html >

  Photos of Laurent g 2010 says:

  New Web site, rollover buttons with not color in place when you click

  On each of your pages, you need to add the class = "brochures" to your anchor tags.

  So the link to the "about me" page looks like in below:

• On Lisezmoi.html"class ="brochures"> About Me"

'The Gallery' link on the 'Gallery' page looks like this:

• The Gallery.html"class = 'thispage' > The Gallery"

Do the same for the pages 'Studio work' and 'contact us '.

Photos of Laurent g 2010 says:

And someone told me that it is a very good site, but do not show the images in the box with the yellow frame upwards unless I tilt the screen at a weird angle, I think he means the image of hero! and sounds

as it uses a Tablet

They're all pretty a your subtle grey but that I do not see is on the page "about me". You just need to bring the gray tone to the top of a few stops.

• L2L IOS VPN question

  Hello

  I created a vpn between two routers in two different sites. The VPN works well, but I noticed something that I can ping from peer1 at peer2 however the tunnel although the ACL of the interesting traffic allows no icmp between two counterparts, it is configured as follows:

  access-list 120 allow ip 10.10.10.0 255.255.255.0 192.168.2.0 255.255.255.0

  access-list 120 allow ip 1.1.1.1 host 2.2.2.2

  No icmp is allowed, but the icmp traffic is encapsulated, encrypted, and through the tunnel, why?

  Hello moahmed1981,

  When you configure access-list for IPs, so it includes ICMP, TCP, and UDP, therefore, it is expected that you will be able to ping across the tunnel.

  If you want to change this, please configure the VPN filter to prevent the ping to the vpn tunnel.
  Here's a doc for your reference:-
  https://popravak.WordPress.com/2011/11/07/Cisco-IOS-VPN-filter/

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• How to match tunnel-group with auth ASA 8.2 and IPSec VPN Client using digital certificates with Microsoft CA

  Hello

  I set up a lab for RA VPN with a version of the ASA5510 8.2 and VPN Client 5 software using digital certificates with Microsoft CA on a Windows 2003 server. I did the configuration based on this document from Cisco's Web site:

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a0080930f21.shtml

  Now, the vpn works fine, but now I need to configure a tunnel-different groups so I can provide different services to different users. The problem I have now is that I don't know how to set it up for the certificate is the name of tunnel-group. If I do an ASA debug crypto isakmp I get this error message:

  % ASA-713906 7: IP = 165.98.139.12, trying to find the group through OR...
  % 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group via IKE ID...
  % 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group via IP ADDR...
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group using default group...
  % ASA-713906 7: IP = 165.98.139.12, connection landed on tunnel_group DefaultRAGroup

  So, basically, when using certificates I connect always VPN RA only with the group default DefaultRAGroup. Do I have to use a model of different web registration for application for a certificate instead of the user model? How can I determine the OU on the user certificate so that match tunnel-group?

  Please help me!

  Kind regards

  Fernando Aguirre

  You can use the group certificate mapping feature to map to a specific group.

  This is the configuration for your reference guide:

  http://www.Cisco.com/en/us/partner/docs/security/ASA/asa82/configuration/guide/IKE.html#wp1053978

  And here is the command for "map of crypto ca certificate": reference

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/C5.html#wp2186685

  Hope that helps.

• Cisco IOS CA

  Team,

  I use software Cisco IOS XE, Version 03.15.00.S - Standard Support version Cisco IOS software, software of CSR1000V (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5 (2) S, (fc3) SOFTWARE VERSION to support my Cisco IOS CA.

  In short, I am trying to support a FlexVPN - client VPN Win7 according to document tac 115907 id

  In this document, he says that OpenSSL CA is used but a Cisco IOS CA can also be used. In tests I am at a point where my certificates do not match the example:

  The example document TAC:

  X509v3 extensions:
  X509v3 Key use: F0000000
  Digital signature

  Non-repudiation
  Encryption key

  Data encryption

  My version of laboratory:

  X509v3 extensions:
  X509v3 Key use: A0000000
  Digital signature
  Encryption key

  How can question - I get these replacement using the IOS Cisco CA extensions?

  Chris

  Chris,

  (Shameless Plug) take a look at IOS CA config I used:

  http://www.Cisco.com/c/en/us/support/docs/security/flexvpn/115014-flexvp...

  M.

• Cisco IOS autogroups

  Hi all
  
  I recently added 90 - odd Cisco switches for installation of HQ of our Organization through the HQ command line tools.  Almost half of them, the individual switch ports have been detected and HQ automatically created autogroups for the ports on the switch.  For the rest of the switches, no switch ports have been detected automatically.  As far as I know, there is no significant difference in configuration between switches, but I'm still looking into it.  All switches are configured in central administration under the Cisco IOS platform.
  
  Has anyone experience this problem with switches?  Anyone know how the process of discovery of autogroup works for Cisco IOS/IOS Interface devices?
  
  John Miller

  Hi John,.

  I think that you run into a bug that has been discussed here:
  http://communities.VMware.com/message/1937579#1937579

• VPN site to Site on both ends using Cisco 871

  I would like to configure VPN Site to Site using the Cisco 871 templates at both ends, but a hard time to set it up. Can someone tell me how to do or if you know of a link that may help me set up as soon as possible?

  I can learn it, but it's time that banned me in the implementation. The other end is already configured to provide Internet access to all users.

  Tom,

  ########################################################################################

  Router 1 VPN config:

  Internal = 10.0.0.0/24
  Public = 196.1.161.65

  access-list 101 permit ip 10.0.0.0 0.0.0.255 10.193.12.0 0.0.3.255

  access-list 102 deny ip 10.0.0.0 0.0.0.255 10.193.12.0 0.0.3.255
  access-list 102 permit ip 10.0.0.0 0.0.0.255 any

  IP nat inside source list 102 in interface (check the name of the external interface) overload

  crypto ISAKMP policy 10
  3des encryption
  sha hash
  Group 2

  ISAKMP crypto key cisco123 address 196.1.161.66

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  MYmap 10 ipsec-isakmp crypto map
  defined by peer 196.1.161.66
  Set transform-set RIGHT
  match address 101

  interface (check the name of the interface inside)
  IP nat inside

  interface (check the name of the external interface)
  NAT outside IP
  crypto mymap map

  ########################################################################################

  Router 2 VPN config:

  Internal = 10.193.12.0/22
  Public = 196.1.161.66

  access-list 101 permit ip 10.193.12.0 0.0.3.255 10.0.0.0 0.0.0.255

  access-list 102 deny ip 10.193.12.0 0.0.3.255 10.0.0.0 0.0.0.255
  access-list 102 permit ip 10.193.12.0 0.0.3.255 all

  IP nat inside source list 102 in the fast4 interface overload

  crypto ISAKMP policy 10
  3des encryption
  sha hash
  Group 2

  ISAKMP crypto key cisco123 address 196.1.161.65

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  MYmap 10 ipsec-isakmp crypto map
  defined by peer 196.1.161.65
  Set transform-set RIGHT
  match address 101

  interface vlan1
  IP nat inside

  fast4 interface
  NAT outside IP
  crypto mymap map

  ########################################################################################

  The above is an example of configuration.
  It is always recommended to change the pre shared key to something else.

  Federico.

• VPN site to site by using the host name on cisco asa 5540 - dyndns

  Can someone help me configure VPN site to site on cisco asa 5540. The other end is seen configured dyndns and so should set up her counterpart with the host name.

  If the other end is a dynamic IP address, you must configure a dynamic map and then use in the encryption card

  See the following example.

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a00805733df.shtml