VPN site to site by using the host name on cisco asa 5540 - dyndns

Similar Questions

• Remote touch the codec using the host name - matching cache of IPv4

  Pairing for some of the features of my remote client contact is often lost/broken. It uses the DHCP protocol for codecs and uses dynamic DNS entries as 'host name' at the time of the twinning contact to the codec devices.

  While this works for pairing at first, it seems the cache keys resolved IPv4 address of the codec instead of the host name. Whenever the IP address of the codec changes, the pairing is lost.

  Am I wrong? I came to the conclusion that codecs must be treated using static IPs or DHCP reservations for Peel remote to work reliably
  Click Select codec manually..., enter the IP address or host name of the codec and tap Start matching.

  THX
  / David

  Appears this is a limitation of the Touch and/or codec, see bug CSCua05282.  The contact must use the IP address, which is why when you entered the hostname of the endpoint it solved its IP address and used it.

• Impossible to connect from my VIC to the host using the host name.

  Hi guys,.

  When I try to log in from my VIC to the host, I get this message (see photo) but if I use the work just the IP address. I check my DNS and host VMware was not there so I created a PTR record that connects the IP with hostname, I update the DNS, but still nothing happens. Any idea?

  Thank you.

  I was almost positive it is a dns issue...

  You can test the host name of the workstation that you are trying to connect from? try clearing your cache dns on the local workstation-

  > ipconfig/flushdns

  If for some reason that doenst work, and then add the host name of the node to your hosts file

  -

• Cannot add a host with the host name in VC

  Hi all

  Nice day.

  I just finished the installation of 2 servers esx4.0, Vartual Center Server and domain controller server in my home test harness. I added both the host esx server in DNS records. then I tried to add hosts to VC by using the host name, then I get the error message like

  "Unable to contact the (xxxxx) host specified. "the host may not be available on the network, a network cofiguraion problem can exhist or that management on this host services may not respond.

  I checked that all are ping and found no network configuration problem. I am able to add a host using the IP address, but not with the host name. I checked services in VC, all services run very well. Earlier I never had this problem.

  Please help me if someone has the solution.

  Thanks in advance

  Kind regards

  Suresh

  I would check the article below under additional information

  http://KB.VMware.com/kb/1027672

• Workstation 8: Upload failed: Curl error: could not resolve the host name

  I have workstation 8 connected to our ESX host, it shows all the machines and allows me to connect to their end. But when I try to copy/paste/drag and drop a local virtual machine over there he said "Vmware workstation 8: Upload failed: Curl error: could not resolve the host name.

  Someone at - he fell on this or have any ideas why this would be. I think that if it does not find the host name, I could not navigate or connect to my Virtual Center.

  Hello

  Whats is your ESX host name? I would recommend using with full ESX host name during the connection. You can connect to the ESX host using the host name, but to download the VM in this topic, you will need to use FULL of ESX host of domain name when connecting.

  Please try to do it and let us know if it solves your problem.

  Thank you

  Deep

• HTTPS connection to the server with the host name which has its IP address

  Hi all
  
  I work in a development of the solution where a server application is running in a machine and hosts of Application Service SOAP over HTTPS. The server has the certificates for its IP address. My client application tries to use the SOAP Service; but when I connect to the Application Server using the HOST name in the URL, I get the SSLException indicating that the HOST name does not match name the object.
  
  If I use the IP address in the URL, it works well - but I do not like the server application can move to different IP dynamiccaly - if you are using DNS is our solution to hide this complexcity from client applications.
  
  Help, please.
  
  Kind regards
  Kaja

  the HOST name does not match name the object.

  The host name does not have the name of the topic in the server certificate. He agrees with host.domain name.

• How to configure the local and logging remotely using the host profiles, not with advance options

  Help, please

  Hello

  Local and remote syslog feature can be configured for a cluster of similar hosts using the host profiles.

  For more information, see guide installation and Set Up Syslog of the section of the Interface of host profiles in vSphere Installation.

  Connect the Server vCenter by using the vSphere Client.

  Click home.

  Under the administration section, click host profiles.

  Create a new profile or modify an existing profile.

  In the Edit Profile dialog box, set one or more of the five configuration options.

  If you configured using esxcli or advanced syslog configuration options and this has captured a host of reference, 5 configuration options are already visible in the Advanced Configuration option section.

  If syslog has not been previously configured, right-click the section of Advanced Configuration options and add a profile for each of the five configuration options.

  Save the profile and assign it to the hosts.

  For more information please see the documentation Center: (Documentation Centre of vSphere 5.5 )

• display the host name when using Get-VMHostAdvancedConfiguration

  I want to interview several configuration settings in configuration advanced on all ESXi hosts in my vcenter, for example, I ran the following:

  Get-VMHost | Sort-Object Name. Get-VMHostAdvancedConfiguration-name UserVars.ESXiShellInteractiveTimeOut

  who gave me the following result

  Name	Value
  ----	-----

  UserVars.ESXiShellInteracti... 300

  UserVars.ESXiShellInteracti... 300

  UserVars.ESXiShellInteracti... 300

  UserVars.ESXiShellInteracti... 300

  UserVars.ESXiShellInteracti... 300

  UserVars.ESXiShellInteracti... 300

  UserVars.ESXiShellInteracti... 300

  the problem is that it lacks the host name, in any way, I can change the cmdlets to see the host name of an extra column?

  Thank you

  I used the cmdlet Get-AdvancedSetting, not the Get-VMHostAdvancedConfiguration cmdlet

• the cutting of the domain component of the host name for the use of script

  Hello

  I'm trying to rename my < host name > local-local data warehouses.

  Pretty easy in theory as much as it is the only store of data on my host right now.

  I do this

  $vmhosts = get-vmhost-location < data center of choice >

  for each $vmhost in {$vmhosts}

  Get-vmhost $vmhost | get the data store | store game data-name '$vmhost - local.

  }

  Only they named

  myhost.mydomain.com - local instead of

  myhost-local

  I am fairly new to scripting and I do not know how to cut the $vmhost down to remove the. mydomain.com beyond the end.

  I noticed in powershell they mention that you can use .string to shorten the chains just doesn't seem to work.

  Any help would be great.

  Thank you

  You can use the Split method to do this.

  Something like that

  $shortName = $vmhost. Name.Split('.') [0]

  That what is to separate the host name in all places where there is a point.

  The result is returned as an array of strings, and we want the first string

• Extract the host name vCenter using PowerCLI

  Hi all

  I was asked to create a script that displays the host ESX, the version of the product name (I use "Get-View $_USER.USER"). «» ""Config.Product.FullName"), and what I thought, that's easy, vCenter host name." I'm having a hard time trying to figure out how to extract the host name real vCenter. I can get the vDC and the cluster, but I can't find what combination of cmdlets or vim commands can extract this nugget. Is something that is accessible via a standard cmdlet such as get-viproperty, get-view or another?

  TIA,

  g

  Does what you're looking for?

  Get-VMHost | Select Name,@{N="vCenter";E={$_.Uid.Split(':')[0].Split('@')[1]}}
  

• Use the host update utility or install ESXi4 Installable Update 2?

  I have 3 ESXi 4.0 host and you want to upgrade to 4.0 Update 2 and never really used the host update utility, but I doubt if Host Update Utility allows some dirt or something.
  
  I've read in a book but said nothing, while it records the settings of network, security and storage.
  
  What could be better? Use the host update utility or install ESXi4 Installable Update 2?

  Kind regards!

  If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.

  Host update utility is the safest way to do it - and you will save the local VMFS more your configuration.

  If you go directly to the host with the installation CD, your configuration will not be saved, just the VMFS (that with ESXi). In addition, is a way of failure to take in charge of the upgrade.

  Dirty? With ESXi, I really doubt...

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• LaserJet P1505n printer: How can I change the host name to NPI1BDC68 to meaninful something more?

  My network, a HP LaserJet P1505n printer, host name is set to NPI1BDC68. Is this cable or is there a way for me to change? Trying to solve: manuals were reviewed, Forum questions were searched, google General search conducted. I am running Win XP and a Mac Pro with OS X 10.6.8.

  Well, which took me 10 minutes to solve.  I found the answer on a HP site based in France. (I kinda changed my google query and tried again.)  The site asks on first access, if you wish to continue in English, thankfully.  http://support.HP.com/us-en/document/c01175001

  In short, use Internet Explorer or Safari, go to the IP address of your network printer.  For Win XP users, you can determine the IP address using, start/printers and faxes /(select printer)/properties/ports tab / select new/Configure button/second field printer port to down the IP address shown.

  Once connected to the network printer subsystem, select the Networking tab.  The host name is the first field which can be changed. Enter a new name from 1 to 15 characters.  Tip: He doesn't like spaces. Underscores work well and the new name can be mixed case. Press the button apply at the bottom of the screen when done.  Warning appears that access to the printer may need to be changed if the IP address has been changed.  Acknowledge the warning. Printer goes offline for a few seconds. The page automatically refreshes and the new host name can be confirmed by inspection.

• LaserJet M1536dnf: Impossible to change the host name on HP LJ M1536dnf

  Hi everyone;

  I'm changing the host name on our printer that is currently Imprimante1 that's not what I'm looking for (I have no idea how it was change or not at all).

  I tried to access the printer via IP in a browser (tried Chrome, IE and Edge) still occur. I see the host name to the title of the network, however, I am not able to change it.

  I also thought I might be able to install the software and use the Toolbox, except that during the installation, the Toolbox links are created in the start menu, but it is never installed (confirmed uninstall reinstall twice)

  So yes, here it is...

  Anyone have any ideas on the issue?

  See you soon,.

  Do not know your printer exactly, but on most of these when you go to the web page, you must go to networking and you will need to go in which change you the method of how it gets ip address or an ip.  On this screen will be the ability to set the IP in a manual address and the area that contains the host name you should be able to click on it and change the name.

• Angular 2 http.get () fails with "cannot resolve the host name.

  I am trying to get 2 angular (well, ionic 2 actually, but the call failure is part of the kinetic moment) to shoot some json from the web. My code works fine on iOS or Android (via Cordova), but fails on any call http.get () on 10 of BlackBerry. Initially, I had problems because I did not in the whitelist the URL I was trying to download, but after whitelisting now runs the get call, but always fails. The error message "cannot resolve the host name.

  Does anyone have an idea why angular is unable to resolve an external host name when running on BlackBerry 10?

  Never mind... my bad. I encounter this problem when running my Ionic/angular application on a simulator. For me to get always consistent on many simulators BB10 different IP addresses I've run, rather than to allow VMware Player feeding the DHCP server (because it does no reservations of IP), I run a TinyCore Linux server on the same virtual network as simulators, just so that I can use DHCP on the instance of TinyCore instead Allowing no reserves. Unfortunately, I did not complete the configuration of TinyCore properly so nothing on the virtual network becomes a valid gateway or the DNS server list to access the outside world.

  When I run my application on my Z10 physics, it works fine.

• Q10 Q10 blackBerry WIFI - browser error - could not resolve the host name

  Hello

  I use my Q10 while overseas for the Wifi only. My SIM card is in my 9900 (thank you BB not to tell anyone that BIS no longer works and WW BB roaming is not until after people buy OS 10 devices, anyway...) but I want to use the Q10 for Skype, browsing and Email while on WIFI.

  Skype works.

  Browser gives "Could not resolve the host name" and charge no emails.

  WiFi network is good (the 9900 is connected and works, as do other devices). I reset the phone, router, etc. etc.

  All to nothing does not.

  A telephone conversation of two hours with T-Mobile (from abroad) was unnecessary and disconnected.

  All DNS data seems to be there.

  Please help.

  Thank you

  Aviv

  Hello

  Problem solved.

  I have reset the router before, nothing helps. The only way I got it work is as follows:

  (1) turn off the router and wait for the phone to 'do not see' to the network in question.

  (2) turn off Wifi on the phone (menu setting and tap on wifi)

  (3) restart router

  (4) restart the phone

  After about 10 minutes, it is finally connected.

  Thank you all,

  I would BB would have simply kept the features of the 9900 and just made more attractive to the masses, instead of making an iphone with a keyboard...