Cisco para 8.0 Mobile iPhone

Similar Questions

• Cisco 526 Wireless Express Mobility Controller supports AIR-LAP1140N?

  Does anyone know if Cisco 526 Wireless Express Mobility Controller supports the AIP-LAP-1140N Access Points?

  This isn't. The WLC526 supports only the AP521.

  HTH,

  Steve

• The T-mobile iPhone 7 would work with all sim cards in the world?

  Hello

  I've been to order/buy an iPhone 7 since the US site and there FREE no. SIM OPTION!

  Currently I do not have any sim on contracts in the United States. I take this iPhone abroad, in Asia, and use it with the SIM local I'd be living here.

  SSO, I wanted to ask you if I choose the option from T-MOBILE out of the 4 options of sim, would the iPhone 7 work perfectly without a sim card and then work perfectly in ALL COUNTRIES in THE WORLD WITH ANY SIM CARD?

  Thanks yo

  Yes, about as long as the cell service supports the type of SIM card used in the iPhone. If you pay the full price for the iPhone T-Mobile, it is unlocked.

• A Virgin Mobile iPhone SIM card 5 could be integrated into an iPhone SE for the Sprint.

  I currently have an iPhone 5 to Virgin Mobile, I want to update an iPhone, but Virgin Mobile does not currently offer the iPhone SE. If I bought an iPhone for Sprint SE (Virgin Mobile is owned by Sprint) will fit my old SIM to the iPhone 5?

  No, because even if Virgin Mobile are owned by Sprint, they are a different society and in addition, we must remember that the Sprint is a CDMA provider and Virgin Mobile are GSM, so if you want a new iPhone, then perhaps to cancel your contract with Virgin Mobile and a contract with another supplier of GSM like AT & T or T-Mobile.

  If you wanted a CDMA provider, then you can take a look at Verizon.

• If I buy a T-Mobile iPhone in the Apple website, it will come with the T-Mobile SIM and unlocked?

  The SIM card is inserted inside or outside the phone booth? The model will be Global/A1688 and order numbers will follow the following criteria?

  Silver with 16 GB, 64 GB and 128 GB of storage are MKQY2LL/A, MKR42LL/A, MKR82LL/A, now with 16 GB, 64 GB and 128 GB of storage are MKR12LL/A, MKR52LL/A and MKR92LL/a.. space grey with 16 GB, 64 GB and 128 GB of storage are MKQX2LL/A, MKR32LL/A and MKR72LL/A. Finally, the Golden Rose with 16 GB, 64 GB and 128 GB of storage are MKR22LL/A, MKR62LL/A and MKRA2LL/A.

  If you buy an iPhone T-Mobile from Apple it will be locked to T-Mobile. But you can buy an unlocked Apple iPhone, then why would you buy a T-Mobile phone if you do not want to use it with T-Mobile? There is no difference in price.

• Page generated in DW CS4 - how to style for phones mobile/iphone

  Hello

  I develop the following site

  http://www.epproductions.co.UK/katebellingham

  I would like to know if I need to create a new style sheet for the site works well on an iphone?

  and how can I get the iphone to choose this style sheet? Should what settings I put in the CSS?

  Thanks in advance

  Mark

  This can become a bit complicated due to the different types of mobile devices.  For best results, build a separate mobile site - a version much simplified from your desktop site.  Then provide links to your main site for devices that can support.  Test on different devices web site.

  Build mobile Sites

  http://www.mobify.me/

  Generation iPhone, iTouch, iPad web sites & apps

  http://iWebKit.NET/

  http://Mashable.com/2009/11/26/mobile-Web-design/

  http://www.Noupe.com/how-tos/mobile-Web-design-tips-and-best-practices.html

  Or choose a liquid layout for desktop / laptop & iPhones

  http://matthewjamestaylor.com/blog/perfect-multi-column-liquid-layouts

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• connectivity issues mobile iPhone 7

  I have a new iPhone 7 jet black, so far I'm in love. But yesterday, I noticed an annoying problem. The phone loses the network connection (cell to the & t) and he no reconnect, it will remain just it saying no service. I have to go in airplane mode and outside to force it to look for the network connection.

  everyone knows this? and everybody understand what it could be?

  I already missed messages and a phone call. This could worsen as boring to become a problem. If anyone has any idea what this could be please give me a heads up!

  OH! Another thing I noticed, when the iPhone is connected my signal strength went from-102 to my 6 sec to-86 on my 7! Then when I am connected I am connected!

  Hello jpgraphx,

  Thank you for using communities Support from Apple. I know have a cell connection issue on your new iPhone, it's not what you expect. The good news are the following steps will help to solve your problem with loss of cellular data and see no Service and get your new iPhone works properly again.

  If you cannot connect to a cellular network or cellular data

  See you soon!

• Cisco 526 Wireless Express Mobility Controller

  We just bought to UC520, 526 and a LAP521 controller. We got the UC520 upward and running in 15 minutes, but the 526 does not include a lot of documentation. Can not have find the 521 AP on the network nor will it set the layer mode 2. I don't want to configure routing for a 4 Office of PC couche3. During installation, the only option it gives is layer 3 and the documentation says it will make layer 2? Can someone give me any assistance?

  First of all, set up like you would a 4400 WLC or 2106. I will attach the link configuration guide here for you.

  http://www.Cisco.com/en/us/docs/wireless/controller/4.1/Configuration/Guide/ccfig41.html

  Many of the advanced features are disabled on the 526 but you set up substantially the same.

  Dennis

• CUPS, Jabber IM for iPhone, Mobile and external access

  Hello world

  How do you provide external secure access for email Instant Jabber for iPhone client and the Cisco Mobile customer on an iPhone?

  There are so-called security SSL for Jabber Instant Messaging, but is unable to find all the information on how. The Cisco Mobile client appears to the needs of the AnyConnect VPN client and encourage users to connect via VPN, first...

  After a bit of bumping into a wall your head wondering why there was no documentation for external access to Cisco Jabber for iPhone, I realized that Cisco Jabber IM for iPhone is an entirely different product and Jabber for iPhone seems to be the new name of Cisco Mobile customers. Yet, the only documentation I can find for the Jabber Instant Messaging is that I can "security by using the Secure Sockets Layer (SSL) encryption" but no information on implimenting it with CUPS.

  On top of that, the Jabber IM for iPhone can not make calls but rather calls Cisco Mobile, which raises the question of providing external access to this too, and the only solution I've ever found is to use the AnyConnect VPN client on the device also. Suddenly, it seems to offer a solution of Cisco Unified Communications on an iPhone, I need three different and is applications is no longer quite as unified.

  Thank you

  Mark

  Conclusions you drew on the product names are correct. They are transitioning to Jabber like a brand name, but it did not in the iOS VoIP client yet. The most recent Cisco Jabber for Android is the first to include Secure Connect (remote access protected or ensure access transparent, aka). The BU seems characteristic knocking out on a single platform and then replicating them on others before moving on to the next batch of features. I don't have a specific timetable to share but expect customers to iOS updated in the coming months with Secure Connect.

  With regard to the separate clients: I can see both sides of this room. The more I use them more, I agree with the decision to keep them separated and cross-launch when necessary. If you think it is consistent with the way the user interacts already with their phone: voice and texting are two separate applications. I suspect that the developers also get some benefits by keeping things more targeted (e.g. less than test whenever they change something). The only downside to this approach is that each app consumes its own tunnel AnyConnect on the SAA.

• AnyConnect for IPhone - reconnect functionality?

  Hello world!

  I would like to implement the Cisco Anyconnect Client on our IPhones to use the Cisco's Mobile 8.1 via Wifi / 3 G

  I am looking for is:

  (1) the VPN connection does not require intervention by the user to connect.  I think that this can be accomplished using the auth certificate. Is this fair?

  (2) I need VPN to reconnect automatically if the connection is lost. The anyconnect has the function "reconnect". It works on the Iphone?

  If you can provide any good 'rapid' guide to set up the "certificate Auth" for the Anyconnect, I'll be very happy!

  Kind regards

  Martin

  Hello Martin,

  Your two statements are correct, I think that this guide will work for you:

  http://Tools.Cisco.com/Squish/B30b1

  Kind regards.

• How to connect Iphone to Satellite A200 as modem

  Hello

  So I was hitting my head on the wall, trying to figure out why I can't tie my Iphone 3 g to my laptop (Yes, I update 3.0).

  My phone says internet tethering is enabled and even my laptop recognize the phone as a modem, and I see a connection to the local network 3 with local AND INTERNET connection but when I try to use the internet IE still shows the same message, can not display the webpage.

  I finally tried my iphone with my office and it worked and all I had to do was plug it in and start using the internet andf my office is 8 years probably my laptop most recent should be able to do it too.

  Please PLEASE PLEASE If someone knows how to fix this HELP ME!

  Thank you

  Hello

  Unfortunately I m not iPhone owners (but I wish I'd be a ;)) but I read in many different magazines that this function also depends on your phone operator mobile iPhone.)
  As far as I know the it is possible to connect the iphone to a computer as a modem, but applications for data transfer on your mobile contract.

  That's all I can say about it

• Problems to connect via the Cisco VPN client IPSec of for RV180W small business router

  Hello

  I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates successfully with the XAUTH user, I put on the router, but during the negotiation, the client ends with the following, which appears several times on the router error message: ' Mar 20 Oct 19:41:53 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [34360] has no config mode.

  I've read around the internet and a number of people seem to say that the Cisco VPN Client is not compatible with the router, but the same thing happens to my iPhone VPN client.

  Is it possible that this can be implemented? Below, I have attached the full configuration files and the log files. Thank you much in advance.

  Router log file (I changed the IP addresses > respectively as well as references to MAC addresses)

  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: floating ports NAT - T with counterpart > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] WARNING: notification to ignore INITIAL-CONTACT > [44074] because it is admitted only after the phase 1.
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [4500]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received unknown Vendor ID
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received Vendor ID: CISCO-UNITY
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT detected: is located behind a device. NAT and alsoPeer is behind a NAT device
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: request sending Xauth for > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association established for > [4500] -> [44074] with spi =>.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REPLY' of > [44074]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: login successful for the user "myusername".
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser connected from the IP >
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: sending of information Exchange: Notify payload [10381]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REQUEST' of > [44074]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: ignored attribute 5
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28683
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28684
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: remove the invalid payload with doi:0.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: purged-Association of ISAKMP security with proto_id = ISAKMP and spi =>.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser Logged Out of the IP >
  Mar 20 Oct 20:03:16 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association deleted for > [4500] -> [44074] with spi =>

  The router configuration

  screen_shot_10-20 - 15_at_09.00_pm.png

  

  IKE policy

  screen_shot_10-20 - 15_at_09.00_pm_001.png

  

  screen_shot_10-20 - 15_at_09.01_pm.png

  

  VPN strategy

  screen_shot_10-20 - 15_at_09.02_pm.png

  

  screen_shot_10-20 - 15_at_09.02_pm_001.png

  

  Client configuration

  Hôte : < router="" ip=""> >

  Authentication group name: remote.com

  Password authentication of the Group: mysecretpassword

  Transport: Enable Transparent Tunneling; IPSec over UDP (NAT/PAT)

  Username: myusername

  Password: mypassword

  Please contact Cisco.

  Correct, the RV180 is not compatible with the Cisco VPN Client.  The Iphone uses the Cisco VPN Client.

  You can use the PPTP on the RV180 server to connect a PPTP Client.

  In addition, it RV180 will allow an IPsec connection to third-party customers 3.  Greenbow and Shrew Soft are 2 commonly used clients.

• iPhone 2.0 &amp; 2811 IOS VPN

  Hello

  My iPhone can establish a session isakmp and get an address IP etc with my IOS 12.4 VPN on a cisco 2811.

  However, when I try and pass traffic, the connection of 2 ipsec phase ends the tunnel.

  I get the error as

  IPSec invalidated policy proposal

  Jul 31 13:13:32.590: ISAKMP:(0:791:HW:2): politics of ITS phase 2 is not acceptable!

  and also

  CRYPTO-6-IKMP_MODE_FAILURE: fast mode processing failed with the peer to

  Someone at - it an iPhone 2.0 to work with a 2811?

  It works with an ASA (not sure which model however)

  Thank you

  Take a look at this:

  http://discussions.Apple.com/thread.jspa?MessageID=7221787�

  http://www.Cisco.com/en/us/docs/security/vpn_client/cisco_vpn_client/iPhone/2.0/connectivity/guide/iPhone.html

  "What Cisco platforms work with Cisco VPN Client on the iPhone?

  PIX firewall and Cisco ASA 5500 security equipment. We recommend the latest version of the software 8.0.x (or), but you can also use software 7.2.x.

  Routers of Cisco IOS nor series VPN 3000 Concentrators VPN supports iPhone VPN features. "

  Concerning

  Farrukh

• iPhone 4 - VPN IPSec

  Hello

  I am trying to connect to our environment by remote Cisco IPSec VPN on the iPhone 4. Here are the versions

  iPhone OS: 4.2.1

  Cisco VPN: ASA5520, version 8.0 (5)

  I am able to connect successfully, but I can't connect to a server after that VPN is established.

  At the same time, I am able to connect via VPN Internet to any PC. The difference, I have seen so far is that when a PC Internet logs, encryption of the Protocol on the ASDM shows "IKE IPsecOverNatT 3DES" for the current session. However, when I connect via iPhone encryption protocol is 'IKE IPsec 3DES.

  Is it possible to force the iPhone to connect on IPsecOverNatT. Please suggest.

  Thank you.

  Hello

  I have almost the same configuration that you have - and it works.

  There is only one difference - splitting tunnel.

  You can try your IPhone traffic have entirely in tunnel?

  HTH

  Pavel

• Download cloud creative app on iPhone 6 Plus

  How can I download cloud creative app on my mobile device which is an iPhone 6 Plus?

  Hi Scottd23085355,

  The creative application of cloud is only for desktop computers and laptops, but there are few applications that you can use on your Iphone.

  You will need to obtain from your app store.

  Please see the link below for more information:

  Adobe mobile, iPhone, iPad, Android apps | Adobe Creative Cloud

  Hope this helps!