Cisco VPN 3060 - Cisco ASA conversion

We are about to embark on the passage of all extensions L2L and network (Cisco ASA 5505 s) of the Cisco VPN 3060 concentrator to a Cisco ASA 5520.

We bsemblable woul to see if there is a simple method to do this as a converter?  Also, there are lessons learned?  We run 8.4.3 so that we know that the NAT configuration has differed.  The 3060 configuration can be changed in anyway for help in configuring the ASA?

Thank you

Dwane

Thank you for your understanding Dwane.

Please mark this message as answered.

Good day.

Tags: Cisco Security

Similar Questions

  • Cisco ASA 5505 VPN Site to Site

    Hi all

    First post on the forums. I have worked with Cisco ASA 5505 for a few months and I recently bought a 2nd ASA to implement tunnel VPN Site to Site. It seems so simple in the number of videos watched on the internet. But when I did he surprise it did work for me... I've removed the tunnels, a number of times and tried to recreate. I use the VPN Wizard in the SMA to create the tunnel. Both the asa 5505 of are and have the same firmware even etc..

    I'd appreciate any help that can be directed to this problem please.  Slowly losing my mind

    Please see details below:

    Two ADMS are 7.1

    IOS

    ASA 1

    Nadia

    :

    ASA Version 9.0 (1)

    !

    hostname PAYBACK

    activate the encrypted password of HSMurh79NVmatjY0

    volatile xlate deny tcp any4 any4

    volatile xlate deny tcp any4 any6

    volatile xlate deny tcp any6 any4

    volatile xlate deny tcp any6 any6

    volatile xlate deny udp any4 any4 eq field

    volatile xlate deny udp any4 any6 eq field

    volatile xlate deny udp any6 any4 eq field

    volatile xlate deny udp any6 any6 eq field

    2KFQnbNIdI.2KYOU encrypted passwd

    names of

    local pool VPN1 192.168.50.1 - 192.168.50.254 255.255.255.0 IP mask

    !

    interface Ethernet0/0

    switchport access vlan 2

    Speed 100

    full duplex

    !

    interface Ethernet0/1

    link Trunk Description of SW1

    switchport trunk allowed vlan 1,10,20,30,40

    switchport trunk vlan 1 native

    switchport mode trunk

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    interface Vlan1

    No nameif

    no level of security

    no ip address

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP 92.51.193.158 255.255.255.252

    !

    interface Vlan10

    nameif inside

    security-level 100

    IP 192.168.10.1 255.255.255.0

    !

    interface Vlan20

    nameif servers

    security-level 100

    address 192.168.20.1 255.255.255.0

    !

    Vlan30 interface

    nameif printers

    security-level 100

    192.168.30.1 IP address 255.255.255.0

    !

    interface Vlan40

    nameif wireless

    security-level 100

    192.168.40.1 IP address 255.255.255.0

    !

    connection line banner welcome to the Payback loyalty systems

    boot system Disk0: / asa901 - k8.bin

    passive FTP mode

    summer time clock GMT/IDT recurring last Sun Mar 01:00 last Sun Oct 02:00

    DNS domain-lookup outside

    DNS lookup field inside

    domain-lookup DNS servers

    DNS lookup domain printers

    DNS domain-lookup wireless

    DNS server-group DefaultDNS

    Server name 83.147.160.2

    Server name 83.147.160.130

    permit same-security-traffic inter-interface

    network obj_any object

    subnet 0.0.0.0 0.0.0.0

    ftp_server network object

    network of the Internal_Report_Server object

    Home 192.168.20.21

    Description address internal automated report server

    network of the Report_Server object

    Home 89.234.126.9

    Description of server automated reports

    service object RDP

    service destination tcp 3389 eq

    Description RDP to the server

    network of the Host_QA_Server object

    Home 89.234.126.10

    Description QA host external address

    network of the Internal_Host_QA object

    Home 192.168.20.22

    host of computer virtual Description for QA

    network of the Internal_QA_Web_Server object

    Home 192.168.20.23

    Description Web Server in the QA environment

    network of the Web_Server_QA_VM object

    Home 89.234.126.11

    Server Web Description in the QA environment

    service object SQL_Server

    destination eq 1433 tcp service

    network of the Demo_Server object

    Home 89.234.126.12

    Description server set up for the product demo

    network of the Internal_Demo_Server object

    Home 192.168.20.24

    Internal description of the demo server IP address

    network of the NETWORK_OBJ_192.168.20.0_24 object

    subnet 192.168.20.0 255.255.255.0

    network of the NETWORK_OBJ_192.168.50.0_26 object

    255.255.255.192 subnet 192.168.50.0

    network of the NETWORK_OBJ_192.168.0.0_16 object

    Subnet 192.168.0.0 255.255.0.0

    service object MSSQL

    destination eq 1434 tcp service

    MSSQL port description

    VPN network object

    192.168.50.0 subnet 255.255.255.0

    network of the NETWORK_OBJ_192.168.50.0_24 object

    192.168.50.0 subnet 255.255.255.0

    service object TS

    tcp destination eq 4400 service

    service of the TS_Return object

    tcp source eq 4400 service

    network of the External_QA_3 object

    Home 89.234.126.13

    network of the Internal_QA_3 object

    Home 192.168.20.25

    network of the Dev_WebServer object

    Home 192.168.20.27

    network of the External_Dev_Web object

    Home 89.234.126.14

    network of the CIX_Subnet object

    255.255.255.0 subnet 192.168.100.0

    network of the NETWORK_OBJ_192.168.10.0_24 object

    192.168.10.0 subnet 255.255.255.0

    network of the NETWORK_OBJ_84.39.233.50 object

    Home 84.39.233.50

    network of the NETWORK_OBJ_92.51.193.158 object

    Home 92.51.193.158

    network of the NETWORK_OBJ_192.168.100.0_24 object

    255.255.255.0 subnet 192.168.100.0

    network of the NETWORK_OBJ_192.168.1.0_24 object

    subnet 192.168.1.0 255.255.255.0

    object-group service DM_INLINE_SERVICE_1

    the tcp destination eq ftp service object

    the purpose of the tcp destination eq netbios-ssn service

    the purpose of the tcp destination eq smtp service

    service-object TS

    the Payback_Internal object-group network

    object-network 192.168.10.0 255.255.255.0

    object-network 192.168.20.0 255.255.255.0

    object-network 192.168.40.0 255.255.255.0

    object-group service DM_INLINE_SERVICE_3

    the purpose of the service tcp destination eq www

    the purpose of the tcp destination eq https service

    service-object TS

    service-object, object TS_Return

    object-group service DM_INLINE_SERVICE_4

    service-object RDP

    the purpose of the service tcp destination eq www

    the purpose of the tcp destination eq https service

    object-group service DM_INLINE_SERVICE_5

    purpose purpose of the MSSQL service

    service-object RDP

    service-object TS

    object-group Protocol TCPUDP

    object-protocol udp

    object-tcp protocol

    object-group service DM_INLINE_SERVICE_6

    service-object TS

    service-object, object TS_Return

    the purpose of the service tcp destination eq www

    the purpose of the tcp destination eq https service

    Note to outside_access_in to access list that this rule allows Internet the interal server.

    Notice on the outside_access_in of the access-list allowed:

    Comment from outside_access_in-list of FTP access

    Comment from outside_access_in-RDP access list

    Comment from outside_access_in-list of SMTP access

    Note to outside_access_in to access list Net Bios

    Comment from outside_access_in-SQL access list

    Comment from outside_access_in-list to access TS - 4400

    outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_1 any4 Internal_Report_Server

    access host access-list outside_access_in note rule internal QA

    Notice on the outside_access_in of the access-list allowed:

    Comment from outside_access_in-HTTP access list

    Comment from outside_access_in-RDP access list

    outside_access_in list extended access permitted tcp any4 object Internal_Host_QA eq www

    Notice on the outside_access_in of the access-list access to the internal Web server:

    Notice on the outside_access_in of the access-list allowed:

    Comment from outside_access_in-HTTP access list

    Comment from outside_access_in-RDP access list

    outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_3 any4 Internal_QA_Web_Server

    Note to outside_access_in to access list rule allowing access to the demo server

    Notice on the outside_access_in of the access-list allowed:

    Comment from outside_access_in-RDP access list

    Comment from outside_access_in-list to access MSSQL

    outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_4 any4 Internal_Demo_Server

    outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_5 any object Internal_QA_3

    Note to outside_access_in access to the development Web server access list

    outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_6 any object Dev_WebServer

    AnyConnect_Client_Local_Print deny any4 any4 ip extended access list

    AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq lpd

    Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

    AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 631

    print the access-list AnyConnect_Client_Local_Print Note Windows port

    AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 9100

    access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

    AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.251 any4 eq 5353

    AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

    AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.252 any4 eq 5355

    Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

    AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 EQ. 137

    AnyConnect_Client_Local_Print list extended access permitted udp any4 any4 eq netbios-ns

    Payback_VPN_splitTunnelAcl list standard access allowed 192.168.20.0 255.255.255.0

    permit outside_cryptomap to access extended list ip 192.168.10.0 255.255.255.0 192.168.100.0 255.255.255.0

    pager lines 24

    Enable logging

    information recording console

    asdm of logging of information

    address record

    [email protected] / * /.

    the journaling recipient

    [email protected] / * /.

    level alerts

    Outside 1500 MTU

    Within 1500 MTU

    MTU 1500 servers

    MTU 1500 printers

    MTU 1500 wireless

    no failover

    ICMP unreachable rate-limit 1 burst-size 1

    ASDM image disk0: / asdm-711 - 52.bin

    don't allow no asdm history

    ARP timeout 14400

    no permit-nonconnected arp

    NAT (inside, outside) source Dynamics one interface

    NAT (wireless, outdoors) source Dynamics one interface

    NAT (servers, outside) no matter what source dynamic interface

    NAT (servers, external) static source Internal_Report_Server Report_Server

    NAT (servers, external) static source Internal_Host_QA Host_QA_Server

    NAT (servers, external) static source Internal_QA_Web_Server Web_Server_QA_VM

    NAT (servers, external) static source Internal_Demo_Server Demo_Server

    NAT (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

    NAT (servers, external) static source Internal_QA_3 External_QA_3

    NAT (servers, external) static source Dev_WebServer External_Dev_Web

    NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

    NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

    Access-group outside_access_in in interface outside

    Route outside 0.0.0.0 0.0.0.0 92.51.193.157 1

    Timeout xlate 03:00

    Pat-xlate timeout 0:00:30

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    identity of the user by default-domain LOCAL
    the ssh LOCAL console AAA authentication
    Enable http server
    http 192.168.10.0 255.255.255.0 inside
    http 192.168.40.0 255.255.255.0 wireless
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
    Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
    Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
    Crypto ipsec ikev2 AES256 ipsec-proposal
    Protocol esp encryption aes-256
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal AES192
    Protocol esp encryption aes-192
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal AES
    Esp aes encryption protocol
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 proposal ipsec 3DES
    Esp 3des encryption protocol
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal OF
    encryption protocol esp
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec pmtu aging infinite - the security association
    card crypto outside_map 1 match address outside_cryptomap
    card crypto outside_map 1 set pfs
    peer set card crypto outside_map 1 84.39.233.50
    card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
    outside_map card crypto 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
    outside_map interface card crypto outside
    trustpool crypto ca policy
    IKEv2 crypto policy 1
    aes-256 encryption
    integrity sha
    Group 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 10
    aes-192 encryption
    integrity sha
    Group 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 20
    aes encryption
    integrity sha
    Group 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 30
    3des encryption
    integrity sha
    Group 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 40
    the Encryption
    integrity sha
    Group 5
    FRP sha
    second life 86400
    Crypto ikev2 activate out of service the customer port 443
    Crypto ikev1 allow outside
    IKEv1 crypto policy 10
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    Telnet timeout 5
    SSH 77.75.100.208 255.255.255.240 outside
    SSH 192.168.10.0 255.255.255.0 inside
    SSH 192.168.40.0 255.255.255.0 wireless
    SSH timeout 5
    Console timeout 0

    dhcpd 192.168.0.1 dns
    dhcpd outside auto_config
    !
    dhcpd address 192.168.10.21 - 192.168.10.240 inside
    dhcpd dns 192.168.20.21 83.147.160.2 interface inside
    paybackloyalty.com dhcpd option 15 inside ascii interface
    dhcpd allow inside
    !
    dhcpd address 192.168.40.21 - 192.168.40.240 Wireless
    dhcpd dns 192.168.20.21 83.147.160.2 wireless interface
    dhcpd update dns of the wireless interface
    dhcpd option 15 ascii paybackloyalty.com wireless interface
    dhcpd activate wireless
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    internal Payback_VPN group strategy
    attributes of Group Policy Payback_VPN
    VPN - 10 concurrent connections
    Ikev1 VPN-tunnel-Protocol
    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list Payback_VPN_splitTunnelAcl
    attributes of Group Policy DfltGrpPolicy
    value of 83.147.160.2 DNS server 83.147.160.130
    VPN-tunnel-Protocol ikev1, ikev2 clientless ssl
    internal GroupPolicy_84.39.233.50 group strategy
    attributes of Group Policy GroupPolicy_84.39.233.50
    VPN-tunnel-Protocol ikev1, ikev2
    Noelle XB/IpvYaATP.2QYm username encrypted password
    Noelle username attributes
    VPN-group-policy Payback_VPN
    type of remote access service
    username Éanna encrypted password privilege 0 vXILR9ZZQIsd1Naw
    Éanna attributes username
    VPN-group-policy Payback_VPN
    type of remote access service
    Michael qpbleUqUEchRrgQX of encrypted password username
    user name Michael attributes
    VPN-group-policy Payback_VPN
    type of remote access service
    username, password from Danny .7fEXdzESUk6S/cC encrypted privilege 0
    user name Danny attributes
    VPN-group-policy Payback_VPN
    type of remote access service
    Aileen tytrelqvV5VRX2pz encrypted password privilege 0 username
    user name Aileen attributes
    VPN-group-policy Payback_VPN
    type of remote access service
    Aidan aDu6YH0V5XaxpEPg encrypted password privilege 0 username
    Aidan username attributes
    VPN-group-policy Payback_VPN
    type of remote access service
    username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
    shane.c iqGMoWOnfO6YKXbw encrypted password username
    username shane.c attributes
    VPN-group-policy Payback_VPN
    type of remote access service
    Shane uYePLcrFadO9pBZx of encrypted password username
    user name Shane attributes
    VPN-group-policy Payback_VPN
    type of remote access service
    username, encrypted James TdYPv1pvld/hPM0d password
    user name James attributes
    VPN-group-policy Payback_VPN
    type of remote access service
    Mark yruxpddqfyNb.qFn of encrypted password username
    user name brand attributes
    type of service admin
    username password of Mary XND5FTEiyu1L1zFD encrypted
    user name Mary attributes
    VPN-group-policy Payback_VPN
    type of remote access service
    Massimo vs65MMo4rM0l4rVu encrypted password privilege 0 username
    Massimo username attributes
    VPN-group-policy Payback_VPN
    type of remote access service
    type tunnel-group Payback_VPN remote access
    attributes global-tunnel-group Payback_VPN
    VPN1 address pool
    Group Policy - by default-Payback_VPN
    IPSec-attributes tunnel-group Payback_VPN
    IKEv1 pre-shared-key *.
    tunnel-group 84.39.233.50 type ipsec-l2l
    tunnel-group 84.39.233.50 General-attributes
    Group - default policy - GroupPolicy_84.39.233.50
    IPSec-attributes tunnel-group 84.39.233.50
    IKEv1 pre-shared-key *.
    remote control-IKEv2 pre-shared-key authentication *.
    pre-shared-key authentication local IKEv2 *.
    !
    Global class-card class
    match default-inspection-traffic
    !
    !
    World-Policy policy-map
    Global category
    inspect the dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    Review the ip options
    inspect the netbios
    inspect the pptp
    inspect the rsh
    inspect the rtsp
    inspect the sip
    inspect the snmp
    inspect sqlnet
    inspect sunrpc
    inspect the tftp
    inspect xdmcp
    inspect the icmp error
    inspect the icmp
    !
    service-policy-international policy global
    192.168.20.21 SMTP server
    context of prompt hostname
    no remote anonymous reporting call
    call-home
    Profile of CiscoTAC-1
    no active account
    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
    email address of destination [email protected] / * /
    destination-mode http transport
    Subscribe to alert-group diagnosis
    Subscribe to alert-group environment
    Subscribe to alert-group monthly periodic inventory
    monthly periodicals to subscribe to alert-group configuration
    daily periodic subscribe to alert-group telemetry
    Cryptochecksum:d06974501eb0327a5ed229c8445f4fe1

    ASA 2

    ASA Version 9.0 (1)

    !

    Payback-CIX hostname

    activate the encrypted password of HSMurh79NVmatjY0

    2KFQnbNIdI.2KYOU encrypted passwd

    names of

    !

    interface Ethernet0/0

    switchport access vlan 2

    Speed 100

    full duplex

    !

    interface Ethernet0/1

    Description this port connects to the local network VIRTUAL 100

    switchport access vlan 100

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    switchport access vlan 100

    !

    interface Ethernet0/4

    switchport access vlan 100

    !

    interface Ethernet0/5

    switchport access vlan 100

    !

    interface Ethernet0/6

    switchport access vlan 100

    !

    interface Ethernet0/7

    switchport access vlan 100

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP 84.39.233.50 255.255.255.240

    !

    interface Vlan100

    nameif inside

    security-level 100

    IP 192.168.100.1 address 255.255.255.0

    !

    banner welcome to Payback loyalty - CIX connection line

    passive FTP mode

    summer time clock gmt/idt recurring last Sun Mar 01:00 last Sun Oct 02:00

    DNS domain-lookup outside

    DNS lookup field inside

    DNS server-group defaultDNS

    Name-Server 8.8.8.8

    Server name 8.8.4.4

    permit same-security-traffic inter-interface

    network obj_any object

    subnet 0.0.0.0 0.0.0.0

    network of the host-CIX-1 object

    host 192.168.100.2

    Description This is the VM server host machine

    network object host-External_CIX-1

    Home 84.39.233.51

    Description This is the external IP address of the server the server VM host

    service object RDP

    source between 1-65535 destination eq 3389 tcp service

    network of the Payback_Office object

    Home 92.51.193.158

    service object MSQL

    destination eq 1433 tcp service

    network of the Development_OLTP object

    Home 192.168.100.10

    Description for Eiresoft VM

    network of the External_Development_OLTP object

    Home 84.39.233.52

    Description This is the external IP address for the virtual machine for Eiresoft

    network of the Eiresoft object

    Home 146.66.160.70

    Contractor s/n description

    network of the External_TMC_Web object

    Home 84.39.233.53

    Description Public address to the TMC Web server

    network of the TMC_Webserver object

    Home 192.168.100.19

    Internal description address TMC Webserver

    network of the External_TMC_OLTP object

    Home 84.39.233.54

    External targets OLTP IP description

    network of the TMC_OLTP object

    Home 192.168.100.18

    description of the interal target IP address

    network of the External_OLTP_Failover object

    Home 84.39.233.55

    IP failover of the OLTP Public description

    network of the OLTP_Failover object

    Home 192.168.100.60

    Server failover OLTP description

    network of the servers object

    subnet 192.168.20.0 255.255.255.0

    being Wired network

    192.168.10.0 subnet 255.255.255.0

    the subject wireless network

    192.168.40.0 subnet 255.255.255.0

    network of the NETWORK_OBJ_192.168.100.0_24 object

    255.255.255.0 subnet 192.168.100.0

    network of the NETWORK_OBJ_192.168.10.0_24 object

    192.168.10.0 subnet 255.255.255.0

    network of the Eiresoft_2nd object

    Home 137.117.217.29

    Description 2nd Eiresoft IP

    network of the Dev_Test_Webserver object

    Home 192.168.100.12

    Description address internal to the Test Server Web Dev

    network of the External_Dev_Test_Webserver object

    Home 84.39.233.56

    Description This is the PB Dev Test Webserver

    network of the NETWORK_OBJ_192.168.1.0_24 object

    subnet 192.168.1.0 255.255.255.0

    object-group service DM_INLINE_SERVICE_1

    service-object MSQL

    service-object RDP

    object-group service DM_INLINE_SERVICE_2

    service-object MSQL

    service-object RDP

    object-group service DM_INLINE_SERVICE_3

    service-object MSQL

    service-object RDP

    object-group service DM_INLINE_SERVICE_4

    service-object MSQL

    service-object RDP

    the tcp destination eq ftp service object

    object-group service DM_INLINE_SERVICE_5

    service-object MSQL

    service-object RDP

    the tcp destination eq ftp service object

    object-group service DM_INLINE_SERVICE_6

    service-object MSQL

    service-object RDP

    the Payback_Intrernal object-group network

    object-network servers

    Wired network-object

    wireless network object

    object-group service DM_INLINE_SERVICE_7

    service-object MSQL

    service-object RDP

    object-group service DM_INLINE_SERVICE_8

    service-object MSQL

    service-object RDP

    object-group service DM_INLINE_SERVICE_9

    service-object MSQL

    service-object RDP

    object-group service DM_INLINE_SERVICE_10

    service-object MSQL

    service-object RDP

    the tcp destination eq ftp service object

    object-group service DM_INLINE_SERVICE_11

    service-object RDP

    the tcp destination eq ftp service object

    outside_access_in list extended access allow object-group DM_INLINE_SERVICE_1 object Payback_Office object CIX-host-1

    Note to access list OLTP Development Office of recovery outside_access_in

    outside_access_in list extended access allow DM_INLINE_SERVICE_2 object Payback_Office object Development_OLTP object-group

    Comment from outside_access_in-access Eiresoft access list

    outside_access_in list extended access allow DM_INLINE_SERVICE_3 object Eiresoft object Development_OLTP object-group

    outside_access_in list extended access allow DM_INLINE_SERVICE_4 object Payback_Office object TMC_Webserver object-group

    Note to outside_access_in access to OLTP for target recovery Office Access list

    outside_access_in list extended access allow DM_INLINE_SERVICE_5 object Payback_Office object TMC_OLTP object-group

    outside_access_in list extended access allow DM_INLINE_SERVICE_6 object Payback_Office object OLTP_Failover object-group

    Note to outside_access_in access-list that's allowing access of the Eiresoft on the failover OLTP server

    outside_access_in list extended access allow DM_INLINE_SERVICE_7 object Eiresoft object OLTP_Failover object-group

    Comment from outside_access_in-access list access for the 2nd period of INVESTIGATION of Eiresoft

    outside_access_in list extended access allow DM_INLINE_SERVICE_8 object Eiresoft_2nd object Development_OLTP object-group

    Note to outside_access_in access from the 2nd IP Eiresoft access list

    outside_access_in list extended access allow DM_INLINE_SERVICE_9 object Eiresoft_2nd object OLTP_Failover object-group

    outside_access_in list extended access allow DM_INLINE_SERVICE_10 object Payback_Office object Dev_Test_Webserver object-group

    outside_access_in list extended access allow DM_INLINE_SERVICE_11 object Payback_Office object External_TMC_OLTP object-group

    outside_cryptomap to access extended list ip 192.168.100.0 allow 255.255.255.0 192.168.10.0 255.255.255.0

    pager lines 24

    Enable logging

    asdm of logging of information

    Outside 1500 MTU

    Within 1500 MTU

    ICMP unreachable rate-limit 1 burst-size 1

    don't allow no asdm history

    ARP timeout 14400

    no permit-nonconnected arp

    NAT (inside, outside) source Dynamics one interface

    NAT (inside, outside) static source CIX-host-1 External_CIX-host-1

    NAT (inside, outside) static source Development_OLTP External_Development_OLTP

    NAT (inside, outside) static source TMC_Webserver External_TMC_Web

    NAT (inside, outside) static source TMC_OLTP External_TMC_OLTP

    NAT (inside, outside) static source OLTP_Failover External_OLTP_Failover

    NAT (inside, outside) static source Dev_Test_Webserver External_Dev_Test_Webserver

    NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

    NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

    Access-group outside_access_in in interface outside

    Route outside 0.0.0.0 0.0.0.0 84.39.233.49 1

    Timeout xlate 03:00

    Pat-xlate timeout 0:00:30

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    identity of the user by default-domain LOCAL

    the ssh LOCAL console AAA authentication

    Enable http server

    http 92.51.193.156 255.255.255.252 outside

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac

    Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit

    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac

    Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit

    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac

    Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit

    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac

    Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit

    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac

    Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit

    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac

    Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit

    Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac

    Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit

    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac

    Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit

    Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac

    Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit

    Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac

    Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit

    Crypto ipsec ikev2 ipsec-proposal OF

    encryption protocol esp
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 proposal ipsec 3DES
    Esp 3des encryption protocol
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal AES
    Esp aes encryption protocol
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal AES192
    Protocol esp encryption aes-192
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 AES256 ipsec-proposal
    Protocol esp encryption aes-256
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec pmtu aging infinite - the security association
    card crypto outside_map 1 match address outside_cryptomap
    card crypto outside_map 1 set pfs
    peer set card crypto outside_map 1 92.51.193.158
    card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
    outside_map card crypto 1jeu ikev2 AES AES192 AES256 3DES ipsec-proposal
    outside_map interface card crypto outside
    trustpool crypto ca policy
    IKEv2 crypto policy 1
    aes-256 encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 10
    aes-192 encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 20
    aes encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 30
    3des encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 40
    the Encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    Crypto ikev2 allow outside
    Crypto ikev1 allow outside
    IKEv1 crypto policy 10
    authentication crack
    aes-256 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 20
    authentication rsa - sig
    aes-256 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 30
    preshared authentication
    aes-256 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 40
    authentication crack
    aes-192 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 50
    authentication rsa - sig
    aes-192 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 60
    preshared authentication
    aes-192 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 70
    authentication crack
    aes encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 80
    authentication rsa - sig
    aes encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 90
    preshared authentication
    aes encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 100
    authentication crack
    3des encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 110
    authentication rsa - sig
    3des encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 120
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 130
    authentication crack
    the Encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 140
    authentication rsa - sig
    the Encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 150
    preshared authentication
    the Encryption
    sha hash
    Group 2
    life 86400
    Telnet timeout 5
    SSH 77.75.100.208 255.255.255.240 outside
    SSH 92.51.193.156 255.255.255.252 outside
    SSH timeout 5
    Console timeout 0

    dhcpd outside auto_config
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    internal GroupPolicy_92.51.193.158 group strategy
    attributes of Group Policy GroupPolicy_92.51.193.158
    VPN-tunnel-Protocol ikev1, ikev2
    username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
    tunnel-group 92.51.193.158 type ipsec-l2l
    tunnel-group 92.51.193.158 General-attributes
    Group - default policy - GroupPolicy_92.51.193.158
    IPSec-attributes tunnel-group 92.51.193.158
    IKEv1 pre-shared-key *.
    remote control-IKEv2 pre-shared-key authentication *.
    pre-shared-key authentication local IKEv2 *.
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect esmtp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the sip
    inspect the netbios
    inspect the tftp
    Review the ip options
    inspect the icmp
    !
    global service-policy global_policy
    context of prompt hostname
    no remote anonymous reporting call
    Cryptochecksum:83b2069fa311e6037163ae74f9b2bec2
    : end

    Hello

    There are some clear problems I see on a quick glance. These are not related to the actual VPN configuration but rather the NAT configurations.

    All your configuration of NAT CLI format above are configured as manual NAT / double NAT in Section 1. This means that the appliance NAT configurations have been added to the same section of the NAT configurations and scheduling of the NAT inside this Section rules is the cause of the problem for the L2L VPN connection for some.

    Here are a few suggestions on what to change

    ASA1

    Minimal changes

    the object of the LAN network

    192.168.10.0 subnet 255.255.255.0

    being REMOTE-LAN network

    255.255.255.0 subnet 192.168.100.0

    NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

    no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

    That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

    Finally, we remove the old rule that generated the ASDM. It would do the same thing if it has been moved to the top, but I generally find the creation of the 'object' with descriptive names easier on the eyes in the long term.

    Other suggestions

    These changes are not necessary with regard to the VPN L2L. Here are some suggestions how to clean a part of NAT configurations.

    PAT-SOURCE network object-group

    source networks internal PAT Description

    object-network 192.168.10.0 255.255.255.0

    object-network 192.168.20.0 255.255.255.0

    object-network 192.168.40.0 255.255.255.0

    NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

    No source (indoor, outdoor) nat Dynamics one interface

    no nat (wireless, outdoors) source Dynamics one interface

    no nat (servers, outside) no matter what source dynamic interface

    The above configuration creates a "object-group" that lists all internal networks that you have dynamic PAT configured so far. It then uses the ' object-group ' in a command unique 'nat' to manage the dynamic PAT for all internal networks (with the exception of printers who had nothing at first). Then we remove the old PAT dynamic configurations.

    Contains the command "nat" "car after" because it moving this "nat" configuration to the bottom of the NAT rules. For this reason its less likely to cause problems in the future.

    network of the SERVERS object

    subnet 192.168.20.0 255.255.255.0

    network of the VPN-POOL object

    192.168.50.0 subnet 255.255.255.0

    NAT (servers, external) 2 static static source of destination of SERVERS SERVERS VPN-VPN-POOL

    no nat (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

    The above configuration is supposed to create a NAT0 configuration for traffic between the network and the pool of Client VPN server. To my knowledge the old configuration that remove us is not used because the traffic would have matched PAT rule dynamic server yet rather than this rule which is later in the NAT configurations and would not be addressed.

    no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

    It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

    ASA2

    Minimal changes

    the object of the LAN network

    255.255.255.0 subnet 192.168.100.0

    being REMOTE-LAN network

    192.168.10.0 subnet 255.255.255.0

    NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

    no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

    That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

    Finally, we remove the old rule that generated the ASDM.

    Other suggestions

    PAT-SOURCE network object-group

    object-network 192.168.100.0 255.255.255.0

    NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

    No source (indoor, outdoor) nat Dynamics one interface

    The above configuration is supposed to do the same thing with the other ASA. Although given that this network contains only a single subnet it cleans the "nat" configurations exist that much. But the order of the "nat" configurations is changed to avoid further problems with the NAT order.

    no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

    It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

    I suggest trying the changes related to VPN L2L first NAT0 configurations and test traffic. So who gets the work of connectivity, then you could consider changing other NAT configurations. There are other things that could be changed also in what concerns THAT static NAT servers but that probably better left for another time.

    Hope this makes any sense and has helped

    Remember to mark a reply as the answer if it answered your question.

    Feel free to ask more if necessary

    -Jouni

  • Problem with the VPN site to site for the two cisco asa 5505

    Starting with cisco asa. I wanted to do a vpn site-to site of cisco. I need help. I can't ping from site A to site B and vice versa.

    Cisco Config asa1

    interface Ethernet0/0
    switchport access vlan 1
    !
    interface Ethernet0/1
    switchport access vlan 2
    !
    interface Vlan1
    nameif outside
    security-level 0
    IP address 172.xxx.xx.4 255.255.240.0
    !
    interface Vlan2
    nameif inside
    security-level 100
    IP 192.168.60.2 255.255.255.0
    !
    passive FTP mode
    network of the Lan_Outside object
    192.168.60.0 subnet 255.255.255.0
    network of the NETWORK_OBJ_192.168.1.0_24 object
    subnet 192.168.1.0 255.255.255.0
    network of the NETWORK_OBJ_192.168.60.0_24 object
    192.168.60.0 subnet 255.255.255.0
    object-group Protocol DM_INLINE_PROTOCOL_1
    ip protocol object
    icmp protocol object
    object-group Protocol DM_INLINE_PROTOCOL_2
    ip protocol object
    icmp protocol object
    object-group Protocol DM_INLINE_PROTOCOL_3
    ip protocol object
    icmp protocol object
    Access extensive list ip 192.168.60.0 Outside_cryptomap allow 255.255.255.0 192.168.1.0 255.255.255.0
    Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
    Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
    Inside_access_in list extended access allow DM_INLINE_PROTOCOL_2 of object-group a
    network of the Lan_Outside object
    NAT (inside, outside) interface dynamic dns
    Access-group Outside_access_in in interface outside
    Inside_access_in access to the interface inside group
    Route outside 0.0.0.0 0.0.0.0 172.110.xx.1 1
    Timeout xlate 03:00
    Pat-xlate timeout 0:00:30
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    Floating conn timeout 0:00:00
    dynamic-access-policy-registration DfltAccessPolicy
    identity of the user by default-domain LOCAL
    AAA authentication http LOCAL console
    Enable http server
    http 192.168.60.0 255.255.255.0 inside
    http 96.xx.xx.222 255.255.255.255 outside
    No snmp server location
    No snmp Server contact
    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
    Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
    Crypto ipsec ikev2 ipsec-proposal OF
    encryption protocol esp
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 proposal ipsec 3DES
    Esp 3des encryption protocol
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal AES
    Esp aes encryption protocol
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal AES192
    Protocol esp encryption aes-192
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 AES256 ipsec-proposal
    Protocol esp encryption aes-256
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec pmtu aging infinite - the security association
    card crypto Outside_map 1 corresponds to the address Outside_cryptomap
    card crypto Outside_map 1 set peer 96.88.75.222
    card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
    card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
    Outside_map interface card crypto outside
    trustpool crypto ca policy
    IKEv2 crypto policy 1
    aes-256 encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 10
    aes-192 encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 20
    aes encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 30
    3des encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 40
    the Encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    Crypto ikev2 allow outside
    Crypto ikev1 allow outside
    IKEv1 crypto policy 10
    authentication crack
    aes-256 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 20
    authentication rsa - sig
    aes-256 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 30
    preshared authentication
    aes-256 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 40
    authentication crack
    aes-192 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 50
    authentication rsa - sig
    aes-192 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 60
    preshared authentication
    aes-192 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 70
    authentication crack
    aes encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 80
    authentication rsa - sig
    aes encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 90
    preshared authentication
    aes encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 100
    authentication crack
    3des encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 110
    authentication rsa - sig
    3des encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 120
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 130
    authentication crack
    the Encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 140
    authentication rsa - sig
    the Encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 150
    preshared authentication
    the Encryption
    sha hash
    Group 2
    life 86400
    Telnet timeout 5
    SSH stricthostkeycheck
    SSH timeout 5
    SSH group dh-Group1-sha1 key exchange
    Console timeout 0
    inside access management

    dhcpd address 192.168.60.50 - 192.168.60.100 inside
    dhcpd allow inside
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    WebVPN
    AnyConnect essentials
    internal GroupPolicy_96.xx.xx.222 group strategy
    attributes of Group Policy GroupPolicy_96.xx.xx.222
    VPN-tunnel-Protocol ikev1, ikev2
    username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
    tunnel-group 96.xx.xx.222 type ipsec-l2l
    tunnel-group 96.xx.xx.222 General-attributes
    Group - default policy - GroupPolicy_96.xx.xx.222
    96.XX.XX.222 group of tunnel ipsec-attributes
    IKEv1 pre-shared-key *.
    remote control-IKEv2 pre-shared-key authentication *.
    pre-shared-key authentication local IKEv2 *.
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect esmtp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the sip
    inspect the netbios
    inspect the tftp
    Review the ip options
    inspect the icmp
    inspect the icmp error

    ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    Cisco ASA 2 config

    interface Ethernet0/0
    switchport access vlan 1
    !
    interface Ethernet0/1
    switchport access vlan 2
    !
    interface Vlan1
    nameif outside
    security-level 0
    IP address 96.xx.xx.222 255.255.255.248
    !
    interface Vlan2
    nameif inside
    security-level 100
    IP 192.168.1.254 255.255.255.0
    !
    passive FTP mode
    permit same-security-traffic inter-interface
    permit same-security-traffic intra-interface
    network of the Lan_Outside object
    subnet 192.168.1.0 255.255.255.0
    network of the NETWORK_OBJ_192.168.60.0_24 object
    192.168.60.0 subnet 255.255.255.0
    network of the NETWORK_OBJ_192.168.1.0_24 object
    subnet 192.168.1.0 255.255.255.0
    object-group Protocol DM_INLINE_PROTOCOL_1
    ip protocol object
    icmp protocol object
    object-group Protocol DM_INLINE_PROTOCOL_2
    ip protocol object
    icmp protocol object
    object-group Protocol DM_INLINE_PROTOCOL_3
    ip protocol object
    icmp protocol object
    object-group Protocol DM_INLINE_PROTOCOL_4
    ip protocol object
    icmp protocol object
    Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_2 of object-group 192.168.1.0 255.255.255.0 192.168.60.0 255.255.255.0
    Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
    Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
    Inside_access_in list extended access allow DM_INLINE_PROTOCOL_4 of object-group a
    pager lines 24
    Enable logging
    asdm of logging of information
    Outside 1500 MTU
    Within 1500 MTU
    no failover
    ICMP unreachable rate-limit 1 burst-size 1
    don't allow no asdm history
    ARP timeout 14400
    no permit-nonconnected arp
    NAT (inside, outside) static source NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.60.0_24 NETWORK_OBJ_192.168.60.0_24 non-proxy-arp-search of route static destination
    !
    network of the Lan_Outside object
    dynamic NAT (all, outside) interface
    Access-group Outside_access_in in interface outside
    Inside_access_in access to the interface inside group
    Route outside 0.0.0.0 0.0.0.0 96.xx.xx.217 1
    Timeout xlate 03:00
    Pat-xlate timeout 0:00:30
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    Floating conn timeout 0:00:00
    dynamic-access-policy-registration DfltAccessPolicy
    identity of the user by default-domain LOCAL
    AAA authentication http LOCAL console
    Enable http server
    http 192.168.1.0 255.255.255.0 inside
    http 172.xxx.xx.4 255.255.255.255 outside
    No snmp server location
    No snmp Server contact
    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
    Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
    Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
    Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
    Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
    Crypto ipsec ikev2 ipsec-proposal OF
    encryption protocol esp
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 proposal ipsec 3DES
    Esp 3des encryption protocol
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal AES
    Esp aes encryption protocol
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal AES192
    Protocol esp encryption aes-192
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 AES256 ipsec-proposal
    Protocol esp encryption aes-256
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec pmtu aging infinite - the security association
    card crypto Outside_map 1 corresponds to the address Outside_cryptomap
    card crypto Outside_map 1 set peer 172.110.74.4
    card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
    card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
    Outside_map interface card crypto outside
    trustpool crypto ca policy
    IKEv2 crypto policy 1
    aes-256 encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 10
    aes-192 encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 20
    aes encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 30
    3des encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 40
    the Encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    Crypto ikev2 allow outside
    Crypto ikev1 allow outside
    IKEv1 crypto policy 10
    authentication crack
    aes-256 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 20
    authentication rsa - sig
    aes-256 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 30
    preshared authentication
    aes-256 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 40
    authentication crack
    aes-192 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 50
    authentication rsa - sig
    aes-192 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 60
    preshared authentication
    aes-192 encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 70
    authentication crack
    aes encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 80
    authentication rsa - sig
    aes encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 90
    preshared authentication
    aes encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 100
    authentication crack
    3des encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 110
    authentication rsa - sig
    3des encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 120
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 130
    authentication crack
    the Encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 140
    authentication rsa - sig
    the Encryption
    sha hash
    Group 2
    life 86400
    IKEv1 crypto policy 150
    preshared authentication
    the Encryption
    sha hash
    Group 2
    life 86400
    Telnet timeout 5
    SSH stricthostkeycheck
    SSH timeout 5
    SSH group dh-Group1-sha1 key exchange
    Console timeout 0

    dhcpd address 192.168.1.50 - 192.168.1.100 inside
    dhcpd allow inside
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    WebVPN
    AnyConnect essentials
    internal GroupPolicy_172.xxx.xx.4 group strategy
    attributes of Group Policy GroupPolicy_172.xxx.xx.4
    L2TP ipsec VPN-tunnel-Protocol ikev1, ikev2
    username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
    tunnel-group 172.xxx.xx.4 type ipsec-l2l
    tunnel-group 172.xxx.xx.4 General-attributes
    Group - default policy - GroupPolicy_172.xxx.xx.4
    172.xxx.XX.4 group of tunnel ipsec-attributes
    IKEv1 pre-shared-key *.
    remote control-IKEv2 pre-shared-key authentication *.
    pre-shared-key authentication local IKEv2 *.
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect esmtp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the sip
    inspect the netbios
    inspect the tftp
    Review the ip options
    inspect the icmp
    inspect the icmp error
    inspect the http

    For IKEv2 configuration: (example config, you can change to encryption, group,...)

    -You must add the declaration of exemption nat (see previous answer).

    -set your encryption domain ACLs:

    access-list-TRAFFIC IPSEC allowed extended LOCAL REMOTE - LAN LAN ip

    -Set the Phase 1:

    Crypto ikev2 allow outside
    IKEv2 crypto policy 10
    3des encryption
    the sha md5 integrity
    Group 5
    FRP sha
    second life 86400

    -Set the Phase 2:

    Crypto ipsec ikev2 ipsec IKEV2-PROPOSAL
    Esp aes encryption protocol
    Esp integrity sha-1 protocol

    -set the Group of tunnel

    tunnel-group REMOTE-PUBLIC-IP type ipsec-l2l
    REMOTE-PUBLIC-IP tunnel-group ipsec-attributes
    IKEv2 authentication remote pre-shared-key cisco123


    IKEv2 authentication local pre-shared-key cisco123

    -Define the encryption card

    address for correspondence CRYPTOMAP 10 - TRAFFIC IPSEC crypto map
    card crypto CRYPTOMAP 10 peer set REMOTE-PUBLIC-IP
    card crypto CRYPTOMAP 10 set ipsec ikev2-IKEV2-PROPOSAL
    CRYPTOMAP interface card crypto outside
    crypto isakmp identity address

    On your config, you have all these commands but on your VPN config, you mix ikev1 and ikev2. You have also defined political different ikev2. Just do a bit of cleaning and reached agreement on a 1 strategy for the two site (encryption, hash,...)

    Thank you

  • Cisco ASA, connect an IP address on the OUTSIDE of the VPN remote access

    Hello

    I tried to find resources on the net but could not find a solution, then post it here. Maybe someone can help.

    So the problem is that I'm trying to access a server on the cloud for remote VPN access (cisco asa 5510).

    The server on the cloud (54.54.54.54) is only accessible from the outside interface (192.168.11.2) NY Firewall (cisco asa 5510)

    I added some ACE for this in the ACL of VPN tunnel to divide.

    NY-standard host allowed fw # access - list vpn_remote-customer 54.54.54.54

    And I see the road added to my cliet machine after the VPN connection, but still it cannot connect to this server.

    The network INTERIOR, I can connect to the server.

    Thanks in advance.

    Hello

    This is most likely a problem with NAT hair/U-turn hairpin.

    Will need to see the configurations or you would need to check yourself

    I don't know what your version of the Software ASA is to be like who determines what is the format of NAT configuration.

    So far, you have confirmed that the ASA VPN configuration provides the VPN Client with the route to the remote server. Then in circulation should be tunnel to the ASA.

    Then, you will need to check the output of this command

    See the race same-security-traffic

    You should see the command in the output below

    permit same-security-traffic intra-interface

    If you do not, you will need to add it. This effect of controls is to allow traffic to enter an interface and exit through the same interface. In your case this applies to Internet VPN Client traffic to the remote server as it between ' outside ' and spell through the 'outside'.

    Then, should ensure that dynamic PAT is configured for the VPN Clients.

    8.2 software (and below)

    You most likely have a dynamic configuration PAT like that on the firewall, if levels of above running software version

    Global 1 interface (outside)

    NAT (inside) 1 0.0.0.0 0.0.0.0

    In this situation if we wanted to add dynamic PAT for a pool of VPN, we would add

    NAT (outside) 1

    This would allow users to use the same public IP address as LAN users, when accessing the remote VPN server

    Software 8.3 (and above)

    Because the NAT configuration format is completely different in the latest software, you could probably just add a new configuration of NAT completely without adding a

    network of the VPN-PAT object

    subnet

    dynamic NAT interface (outdoors, outdoor)

    Of course, its possible that there could be some configuration NAT already on the device which could cause problems for this configuration. If this does not work then that we would have to look at the actual configurations on the ASA.

    Hope this helps

    Let me know how it goes

    -Jouni

  • Between Cisco ASA VPN tunnels with VLAN + hairpin.

    I have two Cisco ASA (5520 and 5505) both with version 9.1 (7) with Over VPN and Security Plus licenses. I try to understand all the internet a traffic tunnel strategy VLAN especially on the 5520 above the 5505 for further routing to the internet (such as a hair/u-turn hairpin). A few warnings:

    1. The 5505 has a dynamically assigned internet address.
    2. The 5505 has sometimes no device turned on behind her, bringing interfaces down to the inside (which can cause problems from site to site).
    3. The 5520 cannot be a client of ezvpn due to its current role as a server of webvpn (anyconnect).

    Let me know if I need to post my current config. Basically, I'm starting from scratch after several attempts.

    Thank you!

    1. The 5505 has a dynamically assigned internet address.

    You can use the following doc to set up the VPN and then this document to configure Hairping/U tuning

    2. the 5505 has sometimes no device turned on behind her, bringing interfaces down to the inside (which can cause problems from site to site).

    Make sure that the interface is connected to a switch so that it remains all the TIME.

    3. 5520 the may not be a ezvpn customer due to she has current as one role anyconnect webvpn ()) server.

    You can use dynamic VPN with normal static rather EZVPN tunnel.

    Kind regards
    Dinesh Moudgil

    PS Please rate helpful messages.

  • the Cisco asa vpn processing error payload: payload ID: 1

    Hello

    I set up vpn L2TP by using ASDM and now I am not able to connect my Cisco ASA 5505.

    It is showing the error message

    3 July 7, 2011 18:57:38 IP = *. *. *. *, payload processing error: ID payload: 1

    Please suggest me how to solve this problem (by using ASDM)

    Thank you

    Hi Nikhil,

    Your config seems incomplete, command 'IPSec l2tp ipsec vpn-tunnel-Protocol' is missing, what is needed to connect L2tp try to reconfigure your firewall using the link:-

    http://www.Cisco.com/en/us/customer/docs/security/ASA/asa80/configuration/guide/l2tp_ips.html

    Hope this helps,

    Parminder Sian

  • Site to Site VPN between Cisco ASA 5505 and Sonicwall TZ170

    I'm trying to implement a VPN site-to site between our data center and office.  The data center has a Cisco ASA 5505 and the Office has a Sonicwall TZ170.  I managed to configure the two so that the vpn connects.  Each of the firewall I ping the IP Address of the internet firewall on the other side and a desktop computer I can ping the IP Address of the firewall internal datacenter but I can't carry traffic between private subnets datacenter and desktop.  Can anyone help?

    The config below has had IPs/passwords has changed.

    External Datacenter: 1.1.1.4

    External office: 1.1.1.1

    Internal data center: 10.5.0.1/24

    Internal office: 10.10.0.1/24

    : Saved
    :
    ASA Version 8.2 (1)
    !
    hostname datacenterfirewall
    mydomain.tld domain name
    activate the password encrypted
    passwd encrypted
    names of
    name 10.10.0.0 OfficeNetwork
    10.5.0.0 DatacenterNetwork name
    !
    interface Vlan1
    nameif inside
    security-level 100
    10.5.0.1 IP address 255.255.255.0
    !
    interface Vlan2
    nameif outside
    security-level 0
    1.1.1.4 IP address 255.255.255.0
    !
    interface Ethernet0/0
    switchport access vlan 2
    !
    interface Ethernet0/1
    !
    interface Ethernet0/2
    !
    interface Ethernet0/3
    !
    interface Ethernet0/4
    !
    interface Ethernet0/5
    !
    interface Ethernet0/6
    !
    interface Ethernet0/7
    !
    passive FTP mode
    clock timezone IS - 5
    clock to summer time EDT recurring
    DNS server-group DefaultDNS
    buydomains.com domain name
    permit same-security-traffic inter-interface
    permit same-security-traffic intra-interface
    inside_access_in list extended access permit icmp any one
    inside_access_in list extended access permitted tcp a whole
    inside_access_in list extended access udp allowed a whole
    inside_access_in of access allowed any ip an extended list
    outside_access_in list extended access permit icmp any one
    outside_access_in list extended access udp allowed any any eq isakmp
    IP DatacenterNetwork 255.255.255.0 OfficeNetwork 255.255.255.0 allow Access-list extended pixtosw
    pixtosw list extended access allow icmp DatacenterNetwork 255.255.255.0 OfficeNetwork 255.255.255.0
    IP OfficeNetwork 255.255.255.0 DatacenterNetwork 255.255.255.0 allow Access-list extended pixtosw
    pixtosw list extended access allow icmp OfficeNetwork 255.255.255.0 DatacenterNetwork 255.255.255.0
    outside_cryptomap_66.1 list of allowed ip extended access all OfficeNetwork 255.255.255.0
    outside_cryptomap_66.1 ip OfficeNetwork 255.255.255.0 allowed extended access list all
    outside_cryptomap_66.1 list extended access permit icmp any OfficeNetwork 255.255.255.0
    outside_cryptomap_66.1 list extended access allowed icmp OfficeNetwork 255.255.255.0 everything
    pager lines 24
    Enable logging
    asdm of logging of information
    Within 1500 MTU
    Outside 1500 MTU
    IP verify reverse path to the outside interface
    ICMP unreachable rate-limit 1 burst-size 1
    ASDM image disk0: / asdm - 623.bin
    don't allow no asdm history
    ARP timeout 14400
    NAT-control
    Global 1 interface (outside)
    NAT (inside) 1 0.0.0.0 0.0.0.0
    inside_access_in access to the interface inside group
    Access-group outside_access_in in interface outside
    Route inside 0.0.0.0 0.0.0.0 1.1.1.1 1
    Route OfficeNetwork 255.255.255.0 outside 1.1.1.1 1
    Timeout xlate 03:00
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-registration DfltAccessPolicy
    Enable http server
    http 10.5.0.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
    Crypto ipsec transform-set esp-aes-256 walthamoffice, esp-sha-hmac
    life crypto ipsec security association seconds 28800
    Crypto ipsec kilobytes of life - safety 4608000 association
    Crypto dynamic-map ciscopix 1 corresponds to the address outside_cryptomap_66.1
    Crypto dynamic-map ciscopix 1 transform-set walthamoffice
    Crypto dynamic-map ciscopix 1 the value reverse-road
    map dynmaptosw 66-isakmp ipsec crypto dynamic ciscopix
    dynmaptosw interface card crypto outside
    crypto isakmp identity address
    crypto ISAKMP allow outside
    crypto ISAKMP policy 10
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    crypto ISAKMP policy 13
    preshared authentication
    aes-256 encryption
    sha hash
    Group 2
    lifetime 28800
    crypto ISAKMP policy 30
    preshared authentication
    aes-256 encryption
    sha hash
    Group 2
    life 86400
    No encryption isakmp nat-traversal
    Telnet 10.5.0.0 255.255.255.0 inside
    Telnet timeout 5
    SSH 10.5.0.0 255.255.255.0 inside
    SSH timeout 5
    Console timeout 0
    management-access inside
    dhcpd address 10.5.0.2 - 10.5.0.254 inside
    dhcpd allow inside
    !

    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    NTP server 66.250.45.2 source outdoors
    NTP server 72.18.205.157 source outdoors
    NTP server 208.53.158.34 source outdoors
    WebVPN
    attributes of Group Policy DfltGrpPolicy
    VPN-idle-timeout no
    username admin password encrypted
    tunnel-group 1.1.1.1 type ipsec-l2l
    tunnel-group 1.1.1.1 ipsec-attributes
    pre-shared-key *.
    !
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    message-length maximum 512
    !
    context of prompt hostname
    Cryptochecksum:7f319172e5de9c0e550804a263f8e49e
    : end

    Mattew, obvious lack of education is the rule exempt from nat for your tunnel, your access list pixtosw is similar on this example, I assume that you have gone through this link, if it does not see the configs on both sides.

    Add the statement of rule sheep in asa and try again.

    NAT (inside) 0-list of access pixtosw

    http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a008052c9d4.shtml

    Concerning

  • The profile number vpn that can be created in cisco asa 5540

    Hi all

    Want to know if there is a limit to how many anyconnect vpn profiles that can be created in a cisco asa 5540? TIA!

    https://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa80/configuration/g...

    Maximum connection profiles

    The maximum number of connection profiles (tunnel groups) that can support a safety device is a function of the maximum number of concurrent sessions of VPN for the + 5 platform. For example, an ASA5505 can support a maximum of 25 concurrent sessions of VPN to 30 tunnel groups (25 + 5). Attempt to add a group of additional tunnel beyond the results of limit in the following message: "ERROR: the limit of 30 groups configured tunnel has been reached.

    Table 32-2specifies the maximum VPN sessions and profiles of connection for each platform ASA.

    Table 32-2 maximum VPN Sessions and profiles of connection by ASA platform

     
    5505 database / security more
    5510/base/security Plus
    5520
    5540
    5550

    Maximum VPN sessions

    10/25

    250

    750

    5000

    5000

    Maximum connection profiles

    15/30

    255

    755

    5005

    5005

  • Cisco ASA 8.4 (3) remote access VPN - client connects but cannot access inside the network

    I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well

    Thank you

    interface Ethernet0/0

    Speed 100

    full duplex

    nameif outside

    security-level 0

    IP x.x.x.x 255.255.255.240

    !

    interface Ethernet0/1

    Speed 100

    full duplex

    nameif inside

    security-level 100

    IP 10.88.10.254 255.255.255.0

    !

    interface Management0/0

    Shutdown

    nameif management

    security-level 0

    no ip address

    !

    permit same-security-traffic inter-interface

    permit same-security-traffic intra-interface

    network of the PAT_to_Outside_ClassA object

    10.88.0.0 subnet 255.255.0.0

    network of the PAT_to_Outside_ClassB object

    subnet 172.16.0.0 255.240.0.0

    network of the PAT_to_Outside_ClassC object

    Subnet 192.168.0.0 255.255.240.0

    network of the LocalNetwork object

    10.88.0.0 subnet 255.255.0.0

    network of the RemoteNetwork1 object

    Subnet 192.168.0.0 255.255.0.0

    network of the RemoteNetwork2 object

    172.16.10.0 subnet 255.255.255.0

    network of the RemoteNetwork3 object

    10.86.0.0 subnet 255.255.0.0

    network of the RemoteNetwork4 object

    10.250.1.0 subnet 255.255.255.0

    network of the NatExempt object

    10.88.10.0 subnet 255.255.255.0

    the Site_to_SiteVPN1 object-group network

    object-network 192.168.4.0 255.255.254.0

    object-network 172.16.10.0 255.255.255.0

    object-network 10.0.0.0 255.0.0.0

    outside_access_in deny ip extended access list a whole

    inside_access_in of access allowed any ip an extended list

    11 extended access-list allow ip 10.250.1.0 255.255.255.0 any

    outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1

    mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool

    NAT static NatExempt NatExempt of the source (indoor, outdoor)

    NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search

    NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1

    NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2

    NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3

    NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search

    !

    network of the PAT_to_Outside_ClassA object

    NAT dynamic interface (indoor, outdoor)

    network of the PAT_to_Outside_ClassB object

    NAT dynamic interface (indoor, outdoor)

    network of the PAT_to_Outside_ClassC object

    NAT dynamic interface (indoor, outdoor)

    Access-group outside_access_in in interface outside

    inside_access_in access to the interface inside group

    Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

    dynamic-access-policy-registration DfltAccessPolicy

    Sysopt connection timewait

    Service resetoutside

    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

    Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series

    Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

    Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

    Crypto-map dynamic dynmap 10 set pfs

    Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1

    life together - the association of security crypto dynamic-map dynmap 10 28800 seconds

    Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000

    Crypto-map dynamic dynmap 10 the value reverse-road

    card crypto mymap 1 match address outside_1_cryptomap

    card crypto mymap 1 set counterpart x.x.x.x

    card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1

    card crypto mymap 86400 seconds, 1 lifetime of security association set

    map mymap 1 set security-association life crypto kilobytes 4608000

    map mymap 100-isakmp ipsec crypto dynamic dynmap

    mymap outside crypto map interface

    crypto isakmp identity address

    Crypto isakmp nat-traversal 30

    Crypto ikev1 allow outside

    IKEv1 crypto ipsec-over-tcp port 10000

    IKEv1 crypto policy 5

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 10

    preshared authentication

    3des encryption

    sha hash

    Group 1

    life 86400

    IKEv1 crypto policy 50

    preshared authentication

    the Encryption

    md5 hash

    Group 2

    life 86400

    IKEv1 crypto policy 60

    preshared authentication

    aes-256 encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 70

    preshared authentication

    aes-256 encryption

    sha hash

    Group 1

    life 86400

    IKEv1 crypto policy 90

    preshared authentication

    aes encryption

    sha hash

    Group 2

    life 86400

    Telnet timeout 5

    Console timeout 0

    management-access inside

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    WebVPN

    internal BACKDOORVPN group policy

    BACKDOORVPN group policy attributes

    value of VPN-filter 11

    Ikev1 VPN-tunnel-Protocol

    Split-tunnel-policy tunnelall

    BH.UK value by default-field

    type tunnel-group BACKDOORVPN remote access

    attributes global-tunnel-group BACKDOORVPN

    address pool Admin_Pool

    Group Policy - by default-BACKDOORVPN

    IPSec-attributes tunnel-group BACKDOORVPN

    IKEv1 pre-shared-key *.

    tunnel-group x.x.x.x type ipsec-l2l

    tunnel-group ipsec-attributes x.x.x.x

    IKEv1 pre-shared-key *.

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    maximum message length automatic of customer

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect esmtp

    inspect sqlnet

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    Review the ip options

    !

    global service-policy global_policy

    Excellent.

    Evaluate the useful ticket.

    Thank you

    Rizwan James

  • RV082 VPN Cisco ASA

    I have seen discussions on people who make reliable VPN connections to a RV082 at a remote site to a Cisco ASA 5500 security series device in a Home Office.  Can we get a FAQ/document displays the settings on both sides so that it works?  Even if mark you it as "This is a configuration not supported, use at your own discretion", it would be better than nothing.  Each Cisco, Linksys device or otherwise, must be able to communicate with other devices, especially on a standard IPSec protocols.

    Please see attached tech note on the definition of the tunnel VPN RVxx Linksys with Cisco
  • enabling remote vpn Cisco asa

    Dear team,

    I have a Cisco asa firewall, I would enable remote vpn (ssl vpn or customer).

    Please check the joint view version and suggest which are missing or need to enable them.

    Therefore, I will obtain concrete results and enable VPN.

    concerning

    SecIT

    With the license and the software version you have, you can only run the existing IPsec VPN client.

    To run AnyConnect SSL VPN client-based, you must acquire a license AnyConnect Essentials. For your platform that would be L-ASA-AC-E -5550=. (Clientless SSL VPN would be a different reference number.)

    I also suggest upgrading your system beyond 8.2 software (2) the current recommended release would be 9.0 (3). (9.1 (5) is the last on the 5550.)

  • Cisco ASA 5505 VPN passthrough

    Hello

    @home i'f installed a Cisco asa 5505 because the provider has the modem cable in transparent mode. So I have the public IP address to my firewall.

    Also for the training because we have in the work of the asa. So I have no feeling with her.

    but sometimes I have to build a VPN session to a server at work. But I do not get a connection to the server. If I remove the ASA 5505, then the connection to the server of work is great. But if to ASA 5505 is back in its place. It does not log VPN to the outside world.

    Could someone point me in the right direction?

    It is possible to create a connection out to the Cisco ASA5505 VPN.

    Thanks in advance

    Greetings

    Palermo

    Hi Palermo,

    You do not have to mention the type of VPN connection, you use.

    If the PPTP protocol then you need to inspect the traffic for the SAA allow again from 'outside '. Try the following:

     ! class-map inspection_default match default-inspection-traffic ! policy-map global_policy class inspection_default inspect pptp ! service-policy global_policy global !

    see you soon,

    SEB.

  • Clientless vpn cisco asa

    All,

    I use the cisco ASA 5500 vpn device, and I need a specific configuration where clients vpn (vpn without customer) would authenticate in an external radius server.

    My problem is that I need to do different bookmarks for different users, so how can I do if my clients are not in the local database? (I do not even have accounts configured on the cisco device), DAP would be the solution?

    TKS in advance

    You are absolutely right. You can configure DAP to make specific bookmarks according to which the user connects via the WebVPN (Clientless SSL VPN).

  • Cisco ASA VPN session reflect a public IP of different source

    Hi all

    I tested and managed to successfully establish the vpn on my cisco asa 5520.

    On my syslog, I can see "parent anyconnect session has begun" during my setting up vpn and "webvpn session is over" at the end of my vpn session

    where public ip used to establish the vpn address is reflected. However after the line "webvpn session is over", I can see other lines in my syslog example "group = vpngroup, username = test, ip = x.x.x.x, disconnected session, session type: anyconnect parent, duration 0 h: 00m23s, xmt bytes: 0, rcv:0 bytes, reason: requested user" where x.x.x.x is not the ip address used to establish my vpn for remote access, it is not related to my vpn ip address below. I am very sure that the x.x.x.x ip failed any vpn for my cisco asa5520. So why it is reflected in my logs to asa cisco? Pls advise, TIA!

    Hello

    Think I remember some display on a similar question in the past. Did some research on google and the next BugID was mentioned in the discussion.

    113019 syslog reports an invalid address when the VPN client disconnects.
  • VPN site to site by using the host name on cisco asa 5540 - dyndns

    Can someone help me configure VPN site to site on cisco asa 5540. The other end is seen configured dyndns and so should set up her counterpart with the host name.

    If the other end is a dynamic IP address, you must configure a dynamic map and then use in the encryption card

    See the following example.

    http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a00805733df.shtml

Maybe you are looking for