Cisco VUSB - Feature Suggestions (and some Questions)

Similar Questions

• WinXPsysytem: The upgrade and have questions

  Have a dell e521 that I train and some questions.  Have already updated to 3 GB of memory on x 86 operating system.  Bios version active what 1.1.6 4/7/2007.  Have checked Dells site and they offer a version of bios 1.1.11 released on 04/09/2007.  Having checked their previous versions and mine is not yet in there.  Don't know if I should go with the 1.1.11 version or stick with what is on mine, any suggestions?  Also, I put in a 500 GB seagate HDD.  Have a 80 GB drive there now which is pretty maxed out.  Playing with the idea to put xp pro on the 80 GB and using the programs and storage 500 GB.  I would like to know if it's a good idea or not!  Could use pointers and how much others who have more experience I have of course on my best options for installation.  for performance and features.  Thank you in advance, Ron.

  It's sad to say, you should probably have spent your money on a new computer rather than on the RAM and a new hard drive.  Windows XP (you posted in a forum of Windows XP, that's what I assume you have) will be supported is no longer starting in April 2014. This means no more security updates and therefore increases the vulnerability to malware.

  That said, your system now-updated can probably support Windows 7. You must run the Windows 7 Upgrade Advisor to check the remaining material.

  As you say, Dell does not list the intervening versions of BIOS with 1.1.4, 1.1.10, so unless someone at Dell or in the Dell forums can tell you what "improvements" in your version or with your version 1.1.10, you have no way of determining that. Based on omissions, I think there were only minor changes in these versions.

  Normally, I would leave the BIOS alone.  Note, however, that Dell "recommends" 1.1.10 be installed because
  The update contains improvements or changes that will keep your system current and compatible with other system modules (firmware, BIOS, drivers and software) software.
  If you want to stick with XP, I would leave the BIOS alone. If you want to install Windows 7 (assuming that there are Windows 7 drivers for all your hardware), I would Setup 1.1.11.  Be sure to read and follow instructions carefully.

  BTW, it's a little surprising that you only have a 80 GB drive.  CNET review of the Dimension E521 said he came with a 320 GB drive.

• When you try to update Photoshop and some other programs in CC, I get an error '49' update failed. Any suggestions?

  When you try to update Photoshop and some other applications in CC I get an error 49, update failed. Any suggestion?

  Hello

  Please see the instructions later links:

  Error download or update Adobe Creative Cloud applications

  CC of Photoshop update failed. Download error 49

  Download error 49

  If you still have the same question,

  MAC:

  • Right-click on the icon in the Finder and select the 'Go - To' folder option.
  • You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  • Then browse the newspaper > Adobe Download > DLM. LOG - Open this file and scroll to the bottom of the appearance of the page for a link http; swupdl find that link and it should download the patch file to update.

  WINDOW:

  • Go to: RUN > type %temp% > Adobe Download > DLM. LOG - Open this file and scroll to the bottom of the appearance of the page for a link http; swupdl find that link and it should download the patch file to update.

  Let us know if that helps.

  Kind regards

  Bani

• How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  Feel free to change the title

  How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  You're talking about Facebook?

  Try the gyration of the Secure Browsing

  http://www.Facebook.com/help?page=1079

• Hi, I recently installed experimental Photoshop CC, despite having 2 GB of memory, the program gives me this message: "3D features and some filters (Flame tree/Picture Frame) require a minimum of 512 MB of VRAM.» Photoshop has detected less than on

  Hi, I recently installed experimental Photoshop CC, despite having 2 GB of memory, the program gives me this message: "3D features and some filters (Flame tree/Picture Frame) require a minimum of 512 MB of VRAM.» Photoshop has detected less than on your system. »

  I installed additional 2 GB for a total of 4 GB and continues the message without giving me a chance to use the 3D. I prefer that you help me to uninstall creative cloud to avoid these drawbacks. Thanks Edwin

  VRAM is not the same as ram.

  Check the specifications of your card and video program.

• Master Page Items question: I use master pages for a 60 page document and just found out that some of my master page items are multiplying! There are some boundaries on the pages and some of them are constantly a quantity apparently endless on top of e

  Master Page Items question: I use master pages for a 60 page document and just found out that some of my master page items are multiplying! There are some boundaries on the pages, and some of them are constantly a quantity apparently without end on top of the other. For example, I replace to change the color of the border and notice a black there's below him so I deleted the extra and there is another and another and another... EEK. I can easily hide them, BUT I fear they will lead to complications in the case of pre-press printing. What is the cause? What can I do to prevent it? How can I get rid of the stack-up?

  It's always haapening, if you substitute any element on the page and later master you reapply the same or another master. I would NEVER say to replace any itme master page in the page. Instead create another master based on the first, make the substitutions and apply this master. Substitutions on the pages should be avoided in all cases, not only for the problem you described above, other issues of accessibility will also come into play.

• Open the characteristics of Michael Ferrante on forms 12 c :) and some c omplaints

  I had seen that he's open to talk about new features, but I think that most of the oracle forms is not very well defined, and maybe someone want some comment on that.

  Hello Michale Ferrante I have some questions for you.

  I am a certified oracle developer forms and oracle database and our company has worked with oracle, more than ten years ago.

  (1) the design and the niche in the market that Oracle Forms and the need for advanced graphic features

  I remember a beta version of forms, I think that it was 3.2, it has all the features to move and draw on the screen, and for some oracle of reason which rejected, and I think it was OK under the strategy of a client database, this isn't a software to make the games.

  But as time passes, the customer needs more features visual, I must acknowledge the work of François Degrelle in forms look and feel project .

  Most of the software in large companies are now client server, and they have too many mobile client software and others that requires the features of high graphics, from one screen to buy items, to a customer of entertainment to marketing.

  In the example: you have a restaurant, they want in an ipad, a menu, and you want to do in the form of oracle, here is where oracle has a big hole.

  This includes of course more functions for working with media types, such as audio in the database, video in the database, audio and video from other sources, like youtube, etc.

  (2) the positioning of oracle forms againt other products oracle, oracle should give a clear positioning of all products related to oracle forms and how they incorporate.

  Oracle has proposed new products, such as adf, apex, etc. and is not only my perception, much thought customer oracle forms would be replaced, but they can't because the idea of oracle is an easy tool for development and in theory with more features (it's the reason why you should have to pay more than 20,000 per customer)

  But personally, I see that I do not see BETTER in the product.

  Customers need a clear vision of how the oracle introduces their different tools in example, specifically oracle must decide where is oracle in this net of product development, client of Mr. If you want to develop, forms oracle is why adf this apex for that, for this java, etc. instead of presenting a confusing set of products ,

  Oracle gives messages are confusing, that is the reason why many customers thought oracle forms would be abandoned and they MUST migrate to adf, this message that I saw too much while reading about adf.

  If coupled with additional confusion with previous development of sun products, Oracle must order their ideas and show a structure of the tools in the suite, which is full, which makes sense, instead of "we have all the tools of development of this, study and choose one, and good luck."

  (3) improvement of the editor

  no more comments, just update the form with all editor the Editor doesn't like any other software.

  (4) new and interesting ideas, a real change of attitude of the oracle and oracle reports developer

  I think the additional graphics functionality, clarity in the relationship of forms with other products, and improvements in the editor are obvious.

  then comes something new and interesting forms oracle could present, no necessary to what the current client does, if not for the new procedures, for example a great app for ipads, a generator of models of various boxes,.

  I said something big, because until now, I had seen oracle is a tool of gray, all other tools, delphi, visual studio, adf, etc. has several very interesting improvements, but forms oracle moves like a turtle in this way, as living separated from the jurisdiction of the market development tools.

  It's like a wake-up CALL

  (5) to separate the teams of developing forms and oracle reports.

  The reason is to offer a less expensive product, and because for reports, there are cheapersolutions, plain html pages to free software as reports of jasper.

  It is is important to separate development of oracle reports and forms of the oracle team, he moves to make it really better justify the investment and the reports to be considered as an independent product compatible with other oracle products.

  In example, perhaps you could add as a solution at the apex, not only to print pdf reports.

  (6) the graphical component lost and optional free projects open (requiring the license of oracle forms-based of course)

  graph of Oracle Server customer oracle 6i, has several problems, but in a moment lost, idon't see nowadays too dificult to make a graphic really nice editor, oracle forms could make a free graphics project.

  Oracle Forms should motivate in an organized system, the developer of forms oracle to use and improve open components, it is 1) good items you need and should install 2) the elements of ther o based on ideas, you may find it useful in some way at the same time they develop to become an interesting compoennt and move to the Group 1).

  (7) the albums of other development oracle technologies Integrator

  Oracle Forms, especially for the price, I think that should be the High option and integrate all the other tools of development, it is, you can use free apex or essential to the adf, but if you want more, then purchase a license of the adf, if you want more then buy forms oracle, something like that.

  Think of this form of Oracle idea should be somehow integrated with jheadstart.

  Once you do this, then the oracle development tools will make sense, instead the attitude oracle currently has to "choose all these development tools, we have and good luck."

  In this idea, and then force to buy oracle reports might be a good idea, because it comes to the top of every thing, the best more than adf and apex, java, etc.

  (8) specialists in the oracle database

  These are the oracle forms is something important, a client for oracle, so it should support all the features of oracle databas, e this includes the posibility

  software sincronize with versions of oracle database,

  return of flame, etc. should be part of counter, create environments to test and restore the backups.

  It's don't forget Oracle their first venture is the database and their tools should complement technologies in the database.

  (9) the new age of basic developed compoements

  Anyone who wants to start a business must program all the fundamentals, it's exhange management, user management, etc..

  I've suggested previously to oracle is to create a software base (database, developer and reports), free, so you can take them and start over, this should include basci funcions to manage basic safety features such as creating a user, the user of the monitor, etc basic functionality for enterprise software, etc., clob, number, date.

  It is doing something no one had done.

  hope to be useful

  Thank you very much for your comments and dedication to the product.  We appreciate all the ideas and comments.

  I wanted to comment on some things you said.

  "... the need for... advanced graphic features. »

  Years, Oracle Forms had a sister product called Oracle Graphics.  It was a product that gave you the ability to create almost any kind of graphics or graphics that your creative mind could imagine.  However, in my opinion, it was very difficult and tedious to use.  For various reasons, Oracle has decided to stop manufacturing and chart support a long time ago.  I suspect part of the reason for the abandonment of the product was that with today's web deployed forms, add your own graphics features are easy enough using Java Beans or even product Oracle BI-haricots.

  "... "This includes of course more functions to work with media types... »

  We are planning to add that support in future versions of some media.  Exactly what version or what types of media is yet to be determined.  Development is currently studying the best approach for implementing such features.  But as for tracing, add your own support via a Java Bean is simple enough and for people who are not very well informed in Java, there are many free examples available on the Internet.  This example should provide an excellent starting point.

  "... Client of Mr. If you want to develop, oracle forms is present, adf to do this, apex to do this, for that, etc. instead of presenting a confusing the value of products, java... »

  If you read a part, documentation each product (General presentation documents), you will see that, at a high level already do.  Explain us what the product, how it works, some of his strengths, etc.  However, it would be impossible for any vendor to tell you exactly which tool you use for your specific job.  We/they can offer an opinion, but exactly what you're using, it's a decision that you must make based on several factors.  For example, you talked about a restaurant.  You can build an application that is used to take orders in the forms or ADF.  Either will do the job.  In most cases, which will make you choose one over the other is the skill value available to accomplish the task.  If your organization does not have a single Java developer, but it has several pl/sql developers, then choosing ADF maybe not the best choice.  In this case, the forms can be the best choice.  Alternatively, you can recycle your existing developers, you can hire new employees who know Java or ADF or hire a third party to help you develop the application in the ADF.  Again, only you can answer these questions.

  It's no different than any other product.  Consider Microsoft Visual Studio.  I can use almost any technology throughout (VB, C++, c#, etc.) to build an application that performs the same tasks.  But if I don't know C++ (for example), why should I choose to use C++ if the application will accomplish the same task in the end?  I'd rather the product know my team.  An exception could be if some other technologies offers a feature not found in the other.  For example, with the ADF, you can easily access on mobile devices.  But even this can be overcome with Forms.  For example with the use of Oracle Partner, AuraPlayerof the product, you can use your existing form request to expose web services to mobile applications without having to change your code to forms.

  In short, we intend to add many new features for future versions of the forms.  Exactly what they will be always plans even though many have already been implemented for the next version.  For some people, the changes we present can be considered to be a much-needed change, and for others, they may feel that the amendments add little value.  It is always difficult to make everyone happy.  I hope that soon (I don't know exactly at what time yet) you will be able to meet up with me at various conferences around the world (Open World, WORLD, DOAG, etc) where I will introduce our new items for the new version of forms.  If all goes well, most of you will appreciate the hard work that Oracle Forms developers have put in updates for the next future releases.  We have a very dedicated team of developers who work on a regular basis to ensure that you can easily upgrade with confidence.

  Thanks again for your comments!

• I was not able to install Microsoft Security Essentials, AUTODESK (no software) and some other applications.

  Hello

  I have a lot of problem with the installation of some software in Windows 7. I was not able to install Microsoft Security Essentials, AUTODESK (no software) and some other applications. Anyone have an idea what is wrong? Thank you very much.

  Original title: installation problem

  Hello

  Please keep us updated on the status of the issue.

  I suggest you try the following steps and check if it helps.

  a. you restart, and then press F8 after the bios screen comes up to bring up the windows boot options menu.

  b. Select "safe mode with command prompt" and press ENTER.

  (c) in the command prompt, type del c:\windows\system32\msiexec.exe and press ENTER.

  d. restart the computer and make sure that the Windows Installer service is set to automatic and started.

  e. try to install the Microsoft security essentials again.

  See also:
  I can't install Microsoft Security Essentials
  http://Windows.Microsoft.com/en-us/Windows/i-cant-install-Microsoft-Security-Essentials

  If you have any question, please ask your question on the forum virus and malware.

  Forums of viruses and malware
  http://answers.Microsoft.com/en-us/protect/Forum/MSE?tab=threads

  Because AUTOCAD, please ask question about Autodesk community.

  Autodesk community
  http://www.Autodesk.com/community

  I hope this helps.

  Thank you

• I downloaded the discography of Bruce Cockburn, but duplicate and some files are empty files. How can I fix this?

  There are 15 albums that I tried to transfer the 'library of windows' to 'windows media player' on my PC, but the duplicate folder and some files were empty. What should I do?

  Hi David,

  There can be several causes for this problem which are preventable

  I suggest to follow the steps provided and we update on the State of the question.

  Method 1: Run the troubleshooters and check if the problem is resolved.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: If the problem persists, then clear the database of Windows Media Player. To do this, follow these steps:

  a. exit Windows Media Player.

  b. for Windows 7: click Start, run, %LOCALAPPDATA%\Microsoft\Media Player and then click on OK.

  c. Select all files in the folder, and then click delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  Method 3: If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. If you run Windows 7, click Start, run, % LOCALAPPDATA%\Microsoft, and then click OK.

  c. Select the folder Media Playerand then click delete on the file menu.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Cisco Layer 3, singing and VLAN

  I have a 5.5 vSphere install and am currently an upgrade of the network for implementation of VOIP.  Switching equipment that I use is a stack of switches Cisco 3850 layer 3 and I go round and round on getting traffic vlan to work properly.  I hope someone can point me in the right direction.

  I have a NETWORK adapter that is connected to the switch (10GB fiber) which handles all the traffic for the esxi host (with the exception of management).  VLAN ID is set to zero (0) and the load balancing is set to the original function of virtual port route.

  I have 2 subnets, 10.1.0.0/16 (management, VLAN 1 and data) and 10.10.1.0/24 (voice, VLAN 10)

  On the host, I Win 2012 R2 server which will host a VOIP PBX.  It must be able to communicate with (VLAN 10) IP phones and other servers (vlan1).

  The switches will be intervlan routing.

  Finally can my question - anyone give me some advice on how to configure the interface on the Cisco for connecting fiber 10GB of my host?  The actual port settings would be extremely useful.  Everything I do at the end of vmware I should do differently?

  In case someone falls on this in a search, here's what I ended up with, 1 Cisco switch:

  switchport trunk allowed vlan 1.10

  switchport mode trunk

  switchport nonegotiate

  switchport voice vlan 10

  Cisco-switch macro description

  spanning tree portfast

  point to point spanning tree-type of link

  The virtual switch, I set all the vlan id and route from the originating virtual port.

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• After you download the security update 2015-008 I lost the function of the function keys and some other functions. Have already played with the keyboard f nothing helps. Are also past system on and outside...

  After you download the security update 2015-008 I lost the function of the function keys and some other functions. Have already played with the keyboard f nothing helps. Are also past system on and outside... need help pls

  PS noticed the update downloaded twice

  disregard my previous question... I found the answer: F1, F2 has been ticked on.

• Programs open to showing only top left of the screen and some programs are huge

  origin: headache Visual, even to post this question

  I have a dell dimension 3000
  Win XP SP3

  I have a problem with my video in general: everything happens in my screen showing that only the upper left corner of the screen when I open my browser and components such as the windows Task Manager appear HUGE! (looks like it tries to run in multi-monitor mode sort - but the system has never put up for that, my cursor handles also away from the screen to my right and taskbar are low down and unable to increase... any suggestions?) I tried to play with the resolution settings, but that does not solve the problem

  (Sorry if post Q is in bad shape, this is my first post and visit)

  -Clark

  Well the reason why I think why your taskbar are cut is very likely due to the monitor settings. On your monitor, you should see a series of buttons. Try to play with them and watch the screen for something like auto or something in that sense. If you do not then you will need to manually change the horizontal and vertical positioning. There are several other settings for the width and height, etc.

  And a question, is the video driver installed on the system?

• Anyone know if where I can download the keyboard screen on again once... my normal keyboard broke, and some how I enlarged it on screen one and cant end settings or information to do little new... its takng upward all over my screen :(

  Anyone know if where I can download the keyboard screen on again once... my normal keyboard broke, and some how I enlarged it on screen one and cant end settings or information to do little new... its takng upward all over my screen :(

  Try this:

  Ctrl + alt + delete > bottom left on the Page, click, accessibility > uncheck, magnifying glass, keyboard

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• Everything on my screen is enlarged, and some windows/programs do not properly fit because of that. What can I do to fix this?

  I restarted, taken the battery, stop down and the problem persists. All my documents are completely expanded, I opened all the windows looks as if it is enlarged, but it is not. If I click on the maximize button, the window half fits on the screen.

  You have poorly defined display resolution. A few reasons that this can happen:

  1. a person has played one more game and the game reduced the resolution.
  2. that you have installed a video driver from Windows Update by mistake - and it is always a mistake.
  3. the video card is a failure.

  Since you did not provide a response to the first Question (see below), I can't guess what happened.

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  Try to set the resolution to the correct according to the instructions below. If this does not work, post is back with the answer to the first Question and some information about your computer (desktop? laptop? video card? monitor make/model, if your desktop?).

  1 start Orb > Control Panel > appearance and personalization. Click personalization, click display settings.
  2. pursuant to the resolution, move the slider to the resolution you want and then click on apply.

  MS Windows help - change the resolution of screen under Vista:
  http://windowshelp.Microsoft.com/Windows/en-us/help/0386b009-5F30-45c7-80c8-ff0395cc24091033.mspx
  MS - MVP - Elephant Boy computers - don't panic!