CIT400 combined registration failure

Similar Questions

• VCS Starter Pack - registration failure

  I can't save my customer movi in VCS started pack x7.1

  It keep ON message display

  Connection failed

  due to registration failure

  If the problem persists contact IT support

  Address findme, user account and local database accounts are configured with the same name/password

  Default and default area sub-area together to verify the credentials.

  I can solve the DNS with the public IP address that is configured in the VCS.

  In the Journal, I get this error message on

  Sep 15 13:36:01	"" "" "" TVCS: event = "error decoding" Service ="SIP" Src - ip = "219.92.14.189" Src-port ="50943" Dst - ip = "219.92.14.190" Dst-port ="5061" detail = "(no host valid in the URL of)" Protocol ="TLS" Level = "1" elements UTCTime = '2012-09-15 13:36:01, 285"
  Sep 15 13:35:58	"" "" "" TVCS: event = "error decoding" Service ="SIP" Src - ip = "219.92.14.189" Src-port ="50942" Dst - ip = "219.92.14.190" Dst-port ="5061" detail = "(no host valid in the URL of)" Protocol ="TLS" Level = "1" elements UTCTime = '2012-09-15 13:35:58, 402"

  Grateful if someone could help.

  Thank you

  Can ensure you that the FindMe ID for the user understands the SIP domain you use (example below) and repeat the test.

  

• Fingerprint registration failure

  System: Travelmate P645-MG (top model with 1080HD, Radeon Graphics, SSD 256), Windows 7 64 bit Pro

  I recently had problems to get the fingerprint reader to work.  Now that a single finger record properly (my left ring finger).  I had my husband try to save, and he failed there as well - so I know that I don't have the defective fingers.  I always used to being somewhat fickle credential registration process, but now it allows me to slide each finger 6 times with a green light on every shot and the last drag a red x saying registration failed.

  The only biometric device in my device manager is EgisTec ES603, and the driver is 3.0.14.0 (15/09/2011).  The Acer site offers 3.2.13.0 dated 25/11/14, but it won't install, telling me that my current license is more recent (as strange as it may seem).  I tried uninstalling the driver in the device and then Manager by installing the current driver from Acer, but it still gives me this message.  I have no day TPM, and it's the only other thing I can think of that may be related to the work of the biometric scanner.  I don't think that it's a hardware problem because it reads a finger quite regularly.  I'm a veteran, while as much as a dog that doesn't bite turned off, I should still have biometric access to this system - but I would really like to register ALL my fingers and maybe even a few toes for backup.  Can anyone help?  I suspect that there may be a former data file I might need to rename or delete.

  Lee

  Thought to update this thread and say that it turns out be a hardware failure. The Acer customer Service in Texas has replaced the scanner and it works much better that there is even new out of the box (so it probably wasn't the first day).

• Key registration failure... What does take?

  I received an error "on the registration request", while he was trying to save my keys on a newly developed up Windows Vista.

  Twice I got an error e/s-reason lack of privileges on vista, after you fix, I received the above mentioned error on the third time.

  Is this the end of life for these keys purchased or can a client re - use the keys again after a new installation or registry clean or something else?

  Thanks in advance for your help

  A set of replacement keys can be sent to you.  Please contact [email protected] and they can help you with this.

• Push registration failure

  Hi I'm new to the development of blackberry,

  I tried to load the example code http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800429/How_To _...

  It is on a BlackBerry but 911 failed to push the record. Can someone tell me why this is happening? I use the blackberry JDE 4.7 and download the application OTA.

  Thank you

  Alvin

  NVM it works now. JAD was missing something. Thank you

• Windows media center Vista - failure of a component of recording units

  Hi I had a problkems with windows media center.  When I try to start, the following message appears "component registration failure.  I looked at the form post Jan last year.  There is a solution that has worked for the same problem?

  Hello

  Try to check and clean the boot:

  http://support.Microsoft.com/kb/929135

  It will be useful.

• Registration - login failed

  Whenever I load Adobe 8 Standard I get a connection registration failure we are unable to connect to adobe to register your product.

  Anyone know how to stop this message from appearing?  Please notify.

  Hi jonm73328124,

  Please refer to this article:- Advanced solutions for connection with Adobe Creative Cloud and Creative Suite applications errors

  Let me know how it goes.

  Kind regards

  Christian

• ehRecvr.exe - Application error the instruction at "0x53801d4f" referenced memory at "0x00000000". The memory could not be "read".

  Message MSVidCtl broadcast system receiver: ehRecvr.exe - Application error the instruction at "0x53801d4f" referenced memory at "0x00000000". The memory could not be "read". This error will not go away and I can not disable or delete the file. How can I stop it?

  Hi SteveGHowe,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  Try to disable and re-enable the Media Center service and check:
   
  a. Click Start. Click run.
  b. type: services.msc and press ENTER.
  c. find Service Media Center Receiver.
  d. right-click on the service and click on stop.
  e. restart the computer and follow the same steps of 'a' by 'c '.
  f. now right-click on the service and click Start.
   
  Also, try the steps listed in the following link:
   
  Troubleshooting steps I use for Media Center component registration failure error

• Record of codec rejected with VCS

  Hello

  I wonder that I had received rejected registration of VCS when the configuration is done correctly for Codecs and through a model of MST. ICMP, DNS and NTP connectivity between venture capital and the Codecs are very good. VCS registration license is 2500 per device.

  the error I get from the TMS is: "#7422 - Gatekeeper registration failure".

  Thank you

  Hi Jens,

  The logging level should be fixed in the coming x7.2.2 I think. I'll check when I am back in the office, but remember that asked me on the release notes for it last week.

  Thank you
  Guy

  Sent by Cisco Support technique iPhone App

• Error Adobe Muse CC 2014

  Hello

  I have no end of problems with Adobe Muse since the upgrade.  Later happens every time I try to save changes to a site of muse.  Using either 'save' or ' save under ', I get a pop-up window saying 'an error occurred' UID: U3953 and then another window opens indicating: "3125: Save as having failed." 3125: registration failure.  SQL ErrorEventType... "When I click on ok Muse closes.  It does not save the file, but then I have to reopen the Muse who becomes very irritating.

  In addition, every time I open it it tells me a later version of muse is available.  I clicked on install now, CC open and completed the download.  Mac has restarted.  Watch again the window indicating that a newer version is available, while CC is indicating that it is up-to-date.

  It is a bit of a shambles very frankly and very irritating, especially in light of the cost!

  Don't believe that someone clues, or is this a common bug?

  Thanks for your help

  I he stares at me in the meantime the "awesome" of adobe support.

• picture password stopped working, says there is a failure during the registration process please try again tried for 2 days

  picture password stopped working, says there is a failure during the registration process please try again tried for 2 days.  He worked for weeks and then stopped.  I tried to change it and get the same message

  Hello

  You can contact Microsoft on phone, please visit the below mentioned link:

  How and when to contact Microsoft and support Customer Service:
  http://support.Microsoft.com/kb/295539
   
   

• I'm getting conversion failure on my files combine.  Same files that I've done before.  It's never happened before.  What is going on?

  Ansyone know whats going on with the failure of file conversion to combine?

  Hi victoriap19600982,

  Please try to combine PDF files after you login to "https://cloud.acrobat.com/combinepdf" by using the credentials of your Adobe ID.

  In addition, make sure that the files you want to combine are not secure, password protected, 3D or a part of a PDF portfolio because these are not cumulative.

  If you are combining supported file types and still get this error, try the following:

  • Log off, and then clear the cache. Then log into https://cloud.acrobat.com/combinepdf using a supported web browser (see: technical specifications |) Adobe Document Cloud).
  • Try to combine small groups of files, to see if you can reduce the error down to a specific file or files.

  Let me know if this helps.

  Kind regards

  Ana Maria

• Help - I'm trying to combine the 7 files in 1 PDF file, but failure message.

  I try to combine the 7 files into 1 PDF file. However, when I press the button to start the process of combination, I get a failure message.  Placing the cursor on the message reveals that the file is password protected.  What I am doing wrong? Basil.

  You cannot merge a file protected by password with other files. You have to

  First remove its protection.

  Monday, April 13, 2015 at 12:23, basiljackson [email protected]>

• Failure of signature blackBerry RRT fot key Code registration

  Hello

  I got all three keys to RIM, and I have registar key ' client - RBB-* .csi "and" customer - CPR-* .csi "but when I try to sign the" customer - RRT-* .csi ' key I get this error:
  "Registration failed because ID customer * is not configured to be registered (i.e. the ID was not in the database of the authorization).

  Did someone knows how to solve this problem, or I'm doing something wrong here?

  Best regards
  Daniel Botelho

  Yes, it is now fixed! They gave me a new set of keys.

• Registration user authentication failure - ESSO password reset

  We finished ok configuration and completed the questions for users ok registration. Then, during the recruitment of a user on the web site (http://iis8-server/vgoselfservicereset/enrollmentclient/EnrollUser.aspx), domain and user (domain\username) are detected ok.

  BUT when you click on 'start', the following message appears:

  "Could not authenticate the user. Please contact your administrator. "

  The installation environment is the following:

  -Enterprise Single Sign-On password resets 11g Release 2 (11.1.2.2).

  -Windows Server 2012 with Active Directory.

  -Standalone Windows Server 2012 (domain member server) with: 8 IIS and ESSO password reset server.

  -Service accounts: SSPRReset and SSPRWEB are configured and valid domain passwords that are not locked. And both accounts are members of the group "Domain Admins" and "Local Administrators" in IIS.

  -Self Service password reset service is running on the web server of ESSO - PR SSPRReset account.

  Could someone please help us find a solution?

  Thanks in advance!

  Finally, we solved the problem with this configuration:

  The IIS with ESSO password reset server had one turn on the 'Web services' virtual directory with anonymous authentication. We changed to disable and solved the problem mentioned.

  The final configuration (that works) of this environment is:

  Virtual directory: EnrollmentClient

  Anonymous authentication: disable

  ASP.NET impersonation: activate

  Digest Authentication: disable

  Forms authentication: disable

  Windows authentication: enable

  Virtual directory: ManagementClient

  Anonymous authentication: disable

  ASP.NET impersonation: activate

  Digest Authentication: disable

  Forms authentication: disable

  Windows authentication: enable

  Virtual directory: ResetClient

  Anonymous authentication: enable

  ASP.NET impersonation: disable

  Digest Authentication: disable

  Forms authentication: disable

  Windows authentication: enable

  Virtual directory: WebServices

  Anonymous authentication: disable

  ASP.NET impersonation: activate

  Digest Authentication: disable

  Forms authentication: disable

  Windows authentication: enable