Record of codec rejected with VCS

Similar Questions

• EPrint jobs will be rejected with the invalid sender. But the sender is valid and used before.

  My jobs eprint will be rejected with the invalid sender. But the sender is an email address, I finally used in February without problem. I tried to remove the address, record and create again. No difference.
  If I leave everything to send to my printer, it works. But I'm not interested, so I changed it back, and I get the same error again.
  Someone at - it s\u0026 this?

  Hello Kim62,

  The only way I know to do this is to pass the senders allowed in all and leave it there.  If you are worried that this will violate your security, I understand, but something to keep in mind is that the only people who know the e-mail address of printers are people you trust give enough for him too.  If I hear another way to get around this, I'll post here for you.

• How to capture (record) streaming video online with his partner is on El Capitan?

  Someone can advise or recommend including many different programs available that I must use to capture (record) streaming video online with it's associated audio on El Capitan?  I tried MacX DVD Converter Pro, but believe it or not, it does not record the audio aspect of video stream.  They claim there is a work around, but after 3 days of trying various corrections, none seems to work for me.

  I tried the Safe Mode Terminal command string: turn off the csrutil. restart, but which did not allow audio capture of MacX DVD Converter Pro driver to install their Audio System driver.

  I tried sudo nvram boot-args = "kext-dev = 1 mode" method, but then again, playback of the recorded video was silent, even though I have heard the audio during recording. "

  I downloaded SOUNDFLOWER, but again, I have heard audio when the screenshot, but Quicktime playback was silent.

  I have hard to believe after that 3 days I am still unable to record what I see and hear at the same time on my screen a video streaming like a Charlie Rose interview with Martin Scorcese discussing Felini.  I don't like what it costs; I care only about the easy, professional and perfect results.  One of the two reasons why I BOUGHT this iMac 27 "with El Capitan was so I COULD record streaming video with audio if I choose so, and after a month, I still can't do and I ran out of the online help after searching dozens of sites to find answers!  So I now turn to the Apple community.  Thank you!

  Anthony

  SnagIt œuvres

  https://www.techsmith.com/SnagIt.html

• Is it possible to record "Mozilla Persona" - password with the FF password manager?

  Is it possible to record "Mozilla Persona" - password with the FF password manager?
  Thank you
  pollti

  Persona.org or login.persona.org is present in your Exceptions list?

• Trying to copy a video on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

  Trying to copy a video to my iPad Pro on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

  Which sector adapter are you using?  The digital adapter AV output is digital, which is not compatible with analog VCR.

  iOS: on adapters AV digital Apple

• My laptop suddenly stopped opening my Hotmail emails. I can connect to Hotmail and records are regularly updated with new emails, but nothing happens when I try to read an email.

  My laptop suddenly stopped opening my Hotmail emails.  I can connect to Hotmail and records are regularly updated with new emails, but nothing happens when I try to read an email.  The cursor will just highlight the particular word on what it is and do nothing.  As far as I know, nothing else was done on my computer.  This could be the cause?

  original title: cannot open emails.

  Hello

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

   

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• SX 20 integration with VCS

  Hello

  Is it possible to integrate 20 SX with VCS.

  Because our customer want to integrate with their MS Lync TP, so found that VCS can do this job. Then please suggest...

  Here also to point out that we are planing to use the public IP address for SX 20 to receive incoming calls from the public IP address, as it will be integrated with ISDN gateway.

  Details of the product for this solution:

  VCS

  SX 20

  TP ISDN Gateway

  Thanks in advance...

  Kind regards

  Daniele

  Yes, its possible, check this.

• With VCS-E media stream, VCS - C

  Hello

  We intend to implement a VCS infrastructure now I'm not sure wich accepting media between endpoints.

  On the photo, you could see the scenario.

  Endpoint 1 is communicate with the endpoint 2.

  1 medium Wich takes the media stream?

  2 what endpoint 1 communicate (media) with VCS - C and not directly with the two end point?

  2. must a direct connection between two end points?

  Thank you

  Martin

  Hi Martin,

  the media could pass control of VCS and highway always in a solution of course and course usage license.

  endpoint 1 must send to the control of VCS, and then it will be passed to the fast lane and then on internet and internet endpoint not directly.

  Rgds,

  Alok

• Integration of Lync with VCS - key Option mandatory?

  We implement integration with VCS on x7.2 lync.  Using B2BUA with lync 2010.  Everything works internally with lync configuration, we are only having trouble with lync external participants come and we border routers in the mix.  Direct pools are set up under the name of trust.  We have turned on the highway of the tower.  The calls started from inward of Lync.  VCS sees calls says it is connected, but the appeal does not and then falls normal call clearing.

  My thought for the failure, is that the OCS Collaboration option key has not been added.  But I can't tell in the deployment guide, if this key is necessary only if the encryption is in progress.

  The other area that we now have on the border routers is if The Edge server and the firewall that the Edge transport server may move multimedia traffic through can then reconfigure to allow RTP over UDP and RTP over TCP to pass.

  Can you confirm if the key of the SCO is a requirement for Lync which crosses the highway?  And are there other areas which we recommend why calls set entirely outdoors.

  Hi Kim,

  the SCO cooperation improved option key is necessary for this scenario of appeal, stated at pages 13 and 53 in the Lync to X7.2 deployment guide:

  Calls on a Microsoft Edge server require the VCS have installed improved OCS Collaboration option key because this key allows the ICE to be used for media connectivity

  You are also right that you will need to allow RTP UDP traffic to and from your Edge transport server, as the TURN server on VCS Highway currently does not support the RTP over TCP. If this isn't the case, ice connectivity check between the B2BUA and the Lync client and server Edge fails, which in turn causes to disconnect.

  Hope this helps,

  Andreas

• Multi-party sharing with VCS

  Hi, looking for some clarification.

  Can I use the multiparty licensing shared if I have a VCS rather than CUCM for call control?

  The ordering guide indicates that it would cooperate with the VCS.

  http://www.Cisco.com/c/dam/en/us/solutions/collateral/collaboration/PERV...

  page 4 - notes: although Cisco UWL Pro applies only to the Cisco Unified Communications Manager based deployments, SMP can be used with Cisco Unified Communications Manager and Cisco telepresence video Communication Server (VCS).

  The CUCM deployment guide

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/con...

  said only CUCM, not VCS - page 99.

  thoughts?

  Multi-party sharing (SMP) licenses can be used with VCS, the licenses that are managed by the Chief and not CUCM, unlike multi-party staff (PMP).

• Cannot find a service record for vCenter service with the host name "IP address"

  After upgrading to vCenter native 5.5 to vSphere Client device everything works, but not all orders for PowerCLI.

  After a command gives me error under VMware vSphere PowerCLI 6.0 Release 1

  Get-TagCategory: 13.07.2015 16:50:48 Get-TagCategory could not find a service record for vCenter service with host name 10.x.x.x

  In Zeile:2 Zeichen:1

  + Get-TagCategory

  + ~~~~~~~~~~~~~~~

  + CategoryInfo: ObjectNotFound: (:)) [Get-TagCategory], VimException)

  + FullyQualifiedErrorId: ViCore_InventoryServiceProxy_GetInventoryServiceInfo_NoVcRegistration, VMware.VimAutomation.ViCore.Cmdlets.Commands.Tagging.GetTagCategory

  does anyone have a solution or an idea for this problem?

  Best

  Marco

  I have exactly the same problem. Are there solutions yet?

  Best regards

  René

  Found the solution in the database (2127028).

• Count records in different tables with a condition

  Hello
  
  I would like to ask for your help. I want to count the records from multiple tables at the same time. These tables have a common column with them with a date data type. The output I want is to see the records in the tables with a condition of the column_date < (specified date).
  
  
  as of:
  
  Select count (*) from (the_tables) where (column_date), (specific_date)
  
  
  Your help would be much appreciated.

  Hello

  || ' WHERE ITEMDATE <= 8/1/2008;';
  

  With the Frank remark about the mistake, another good practice would be to use a connection variable:

  script_sql := 'SELECT COUNT (*) FROM '
  || r_1.owner
  || '.'
  || r_1.table_name
  || ' WHERE ITEMDATE <= :1';
  
  ...
  
  EXECUTE IMMEDIATE script_sql
  INTO this_cnt
  USING to_date('08/01/2008','DD/MM/YYYY');
  

• Insert multiple records in a form with checkboxes

  Hello
  
  I need to insert multiple records in a database of a form using Coldfusion and am stuck - it works correctly when inserting one record at a time. Basically, the user will choose their name of the employee (EmployeeID) in a dynamic list, then several session (open) numbers that represent classes of training.
  
  When I try and select several check boxes, I get this error:
  "The number of query values and destination fields is not the same."
  
  The boxes of the open field are not dynamic, as you can see-how use CFLOOP or any other method to allow several checkboxes be selected, and all open documents is entered into the database on a form?
  
  I used server behaviors Dreamweaver 8 to create the form - which is limiting I know but I'm not a coder. I hope I can add code here to do things correctly function.
  
  
  
  ----APPLICATION CODE------------------------------------------------------------------
  
  <!-get employee names->
  < cfquery name = "rsDisplayEmployee" datasource = "FormationRH" >
  SELECT *.
  OF tblEmployees
  ORDER BY LastName ASC < / cfquery >
  <!-->-->
  <! - insert Records - >
  < cfset CurrentPage = GetFileFromPath (GetTemplatePath ()) >
  < cfif IsDefined "(FORM. MM_InsertRecord") AND the FORM. MM_InsertRecord EQ 'form1' >
  < cfquery datasource = "FormationRH" >
  INSERT INTO tblEnrollments (open, EmployeeID)
  VALUES)
  < cfif IsDefined "(FORM. Open") AND #FORM. Open # NEQ "" > "".
  #FORM. Open #.
  < cfelse >
  NULL VALUE
  < / cfif >
  ,
  < cfif IsDefined "(FORM. EmployeeID") AND #FORM. EmployeeID # NEQ "" > "".
  #FORM. EmployeeID #.
  < cfelse >
  NULL VALUE
  < / cfif >
  ) < / cfquery >
  < cflocation url = "2.cfm" >
  < / cfif >
  <!-->-->
  
  --------FORM CODE-----------------------------------------------------------------------
  
  < form action = "" < cfoutput > #CurrentPage # < / cfoutput > "id = 'form' name ="form"method ="POST">"
  < table width = "100%" border = "0" cellspacing = "0" cellpadding = "4" >
  < b >
  < td width = "100%" > < h2 > < strong > select an employee name < facilities > < / h2 > < table >
  < /tr >
  < b >
  < td > < select name = "EmployeeID" >
  < cfoutput query = "rsDisplayEmployee" >
  < option value = "#rsDisplayEmployee.EmployeeID #" > #rsDisplayEmployee.LastName #, #rsDisplayEmployee.FirstName # < / option >
  < / cfoutput >
  < / select > < table >
  < /tr >
  < /table >
  < h2 > < strong > select training class < facilities > < / h2 >
  < table width = "600" border = "0" cellspacing = "0" cellpadding = "0" >
  < b >
  < td width = "227" valign = "top" > class < table >
  < td width = "373" valign = "top" > < input name = "Open" type = "checkbox" value = "937" / >
  Date < table >
  < /tr >
  < b >
  < td valign = "top" > class < table >
  < td valign = "top" > < label >
  < input name = "Open" type = "checkbox" value = "936" / >
  < / label >
  Date < table >
  < /tr >
  < /table >
  < br / >
  < input type = "submit" name = "Submit" value = 'Sign Up!' / >
  < input type = "hidden" name = "MM_InsertRecord" value = "form" >
  < / make >
  

  "Add a line" I want to say that, for each of the checkboxes selected in your form, the code will be to insert a new record in the database table. Sorry I probably didn't phrase it very well.

  so, no, the code does not need to wrap around each element. Instead the code examines the form.fieldnames variable (form.fieldnames, which is a list separated by commas of all fields defined in the form, is automatically submitted to each form submission - you don't have to define yourself somehow) and for each selected checkbox will insert a new record in your table with the check box selected and selected value the value of the id of the employee.

• How to read/select only the records from a table with non-English characters

  Hello
  I need to find all records in a table with non-English (mainly Chinese) characters in at least one of the varchar2 columns. Let me kow if someone knows a way by which it can be done using SQL/PLSQL.
  
  Best regards
  Imran

  select * from your table
  where your_column != convert(your_column, 'UTF8', 'US7ASCII)
  

  Replace UTF8 with your database character set

  Published by: thtsang on October 15, 2009 03:53 - unequal sign change of! =

• How to reject records that are incompatible with the definition ODI 11 g data store?

  Buenas tardes.

  Como puedo girls los looking than any stupid fulfil the definition of length of atributos as hay in el data do not store? For example, in a process of integration llega a cuyo campo has a length of 50 characters first_name registro, pero base datos solo supports 40 characters. ODI in este falla y being the run y yo Necesito UN than rechace este registro y con continue the run. How I can control this event?

  Of photos muchas gracias.

  Hello

  Ah yes, I forgot about it.

  You can fool ODI by changing the logical length of the column in the data store in the model.

  In this way the I$ table will have a length of more than time and you won't have the problem.

  Kind regards

  JeromeFr

  PS: Your English is above the average on this forum, don't you worry. Most of us is not English-speaking.