Push registration failure

Similar Questions

• VCS Starter Pack - registration failure

  I can't save my customer movi in VCS started pack x7.1

  It keep ON message display

  Connection failed

  due to registration failure

  If the problem persists contact IT support

  Address findme, user account and local database accounts are configured with the same name/password

  Default and default area sub-area together to verify the credentials.

  I can solve the DNS with the public IP address that is configured in the VCS.

  In the Journal, I get this error message on

  Sep 15 13:36:01	"" "" "" TVCS: event = "error decoding" Service ="SIP" Src - ip = "219.92.14.189" Src-port ="50943" Dst - ip = "219.92.14.190" Dst-port ="5061" detail = "(no host valid in the URL of)" Protocol ="TLS" Level = "1" elements UTCTime = '2012-09-15 13:36:01, 285"
  Sep 15 13:35:58	"" "" "" TVCS: event = "error decoding" Service ="SIP" Src - ip = "219.92.14.189" Src-port ="50942" Dst - ip = "219.92.14.190" Dst-port ="5061" detail = "(no host valid in the URL of)" Protocol ="TLS" Level = "1" elements UTCTime = '2012-09-15 13:35:58, 402"

  Grateful if someone could help.

  Thank you

  Can ensure you that the FindMe ID for the user understands the SIP domain you use (example below) and repeat the test.

  

• Fingerprint registration failure

  System: Travelmate P645-MG (top model with 1080HD, Radeon Graphics, SSD 256), Windows 7 64 bit Pro

  I recently had problems to get the fingerprint reader to work.  Now that a single finger record properly (my left ring finger).  I had my husband try to save, and he failed there as well - so I know that I don't have the defective fingers.  I always used to being somewhat fickle credential registration process, but now it allows me to slide each finger 6 times with a green light on every shot and the last drag a red x saying registration failed.

  The only biometric device in my device manager is EgisTec ES603, and the driver is 3.0.14.0 (15/09/2011).  The Acer site offers 3.2.13.0 dated 25/11/14, but it won't install, telling me that my current license is more recent (as strange as it may seem).  I tried uninstalling the driver in the device and then Manager by installing the current driver from Acer, but it still gives me this message.  I have no day TPM, and it's the only other thing I can think of that may be related to the work of the biometric scanner.  I don't think that it's a hardware problem because it reads a finger quite regularly.  I'm a veteran, while as much as a dog that doesn't bite turned off, I should still have biometric access to this system - but I would really like to register ALL my fingers and maybe even a few toes for backup.  Can anyone help?  I suspect that there may be a former data file I might need to rename or delete.

  Lee

  Thought to update this thread and say that it turns out be a hardware failure. The Acer customer Service in Texas has replaced the scanner and it works much better that there is even new out of the box (so it probably wasn't the first day).

• Push registration: (Berr java.lang.IllegalArgumentException) network error

  Hello

  We try to get WebWorks push the work but are a problem with blackberry.push.openBISPushListener. The onRegister function returns a status of 1 (network error).

  The log file shows the following:

  11/9 10:00:54 W net.rim.blackberry.api.push - Berr java.lang.IllegalArgumentException
  11/9 10:00:21 a Contapp - PushDaemon is started.
  11/9 10:00:21 a Contapp - Register push application
  11/9 10:00:21 a Contapp - open BIS push listener
  

  This application is used to work so I wonder if something might have changed in the upgrade of the server push.

  The application code is the following:

  And the following push configuration in the config.xml file:

  
  
  
  
  
  
  
  
  
    BIS-B
    MDS
    TCP_WIFI
    TCP_CELLULAR
    WAP2
    WAP
  
  
  
    read_device_identifying_information
    access_shared
  
  

  It is all tested on a device 9300.

  Any ideas as to why we get this error?

  Thanks in advance for the help!

  Nick

  This issue should now be resolved, please let me know if you continue to have problems with the registration with the EVAL server.

• BIS push registration for lack of client app

  Hi all

  I'm trying to implement the push BIS service in the client application.

  I got the Port number, appId, BPA URL & using that i'm trying to register using the code below

  public boolean registerBpas() {}

  Logger.info ("MyScreen.registerBpas ()");
  /**
  As the suffix of the connection is fixed I just use a Thread to call the code of connection
  *
  **/

  isValue Boolean = false;
         
  try {}
  Logger.info ("-step 1");
  String conparam = getConnParam();
  Logger.info ("---> conparam:" + conparam);
  final String registerUrl = formRegisterRequest (null, BPAS_URL, APP_ID), + conparam / * Conn.getConnectionParameters () * /;
  Logger.info ("\n\n\n msg registerBPAS URL is:" + registerUrl);
  HttpConnection httpConnection = (HttpConnection), Connector.open (registerUrl);
  InputStream is = httpConnection.openInputStream ();
  Response string = new String (IOUtilities.streamToBytes (is));
  Logger.info ("\n\n\n\n\n\n msg RESPOSE CODE:" + response);
  Close (httpConnection, is, null);
  String nextUrl = formRegisterRequest (BPAS_URL, APP_ID response) + conparam / * Conn.getConnectionParameters () * /;
  Logger.info ("\n\n\n\n\n\n msg nextUrl:" + nextUrl);
  HttpConnection nextHttpConnection = (HttpConnection), Connector.open (nextUrl);
  InputStream nextInputStream = nextHttpConnection.openInputStream ();
  response = new String (IOUtilities.streamToBytes (nextInputStream));
  Logger.info ("\n\n\n\n\n\n msg RESPOSE CODE 1:" + response);
  Close (nextHttpConnection, is, null);
  If (REGISTER_SUCCESSFUL.equals (response) |) {USER_ALREADY_SUBSCRIBED. Equals (Response))}
  Logger.info ("saved successfully to push BIS msg");
                          
  Returns true;
  } else {}
  Logger.info ("msg record BPA rejected");
  isValue = false;
  Returns false;
  }
  } catch (final IOException e) {}

  Logger.info ("IOException msg on register()" + e + "" + e.getMessage ());
  isValue = false;
  Returns false;
  }
                  
  Return isValue;
  }

  public static close Sub (conn connection, InputStream is, OutputStream os) {}
  If (OS! = null) {}
  try {}
  OS. Close();
  } catch (IOException e) {}
  }
  }
  If (is! = null) {}
  try {}
  is. Close();
  } catch (IOException e) {}
  }
  }
  If (conn! = null) {}
  try {}
  Conn.Close ();
  } catch (IOException e) {}
  }
  }
  }

  Public Shared Sub errorDialog (final String message)
  {
  UiApplication.getUiApplication () .invokeLater (new Runnable()
  {
  public void run()
  {
  Dialog.Alert (message);
  }
  });
  }

  private static String formRegisterRequest (String bpasUrl, String appId, string token) {}
  StringBuffer sb = new StringBuffer (bpasUrl);
  SB. Append("/MSS/PD_subReg?");
  SB. Append ("ServiceId ="). Append (appid);
  SB. Append("&OSVersion="). Append (DeviceInfo.getSoftwareVersion ());
  SB. Append("&Model="). Append (DeviceInfo.getDeviceName ());
  If (token! = null & token.length () > 0) {}
  SB. Append("&"). Append (Token);
  }
  Return sb.toString ();
  }
      
      
      
  public static String getConnParam() {}
  String connectionParameters = "";
  If (WLANInfo.getWLANState () == WLANInfo.WLAN_STATE_CONNECTED) {}
  Connected to a WiFi access point
  connectionParameters = «;» deviceside = true; interface = wifi. "
  } else {}
  int coverageStatus = CoverageInfo.getCoverageStatus ();
  ServiceRecord record = getWAP2ServiceRecord();
  If (record! = null)
  & (coverageStatus & CoverageInfo.COVERAGE_DIRECT) ==
  CoverageInfo.COVERAGE_DIRECT) {}
  Having network coverage and a book of WAP 2.0 service record
  connectionParameters = «;» deviceside = true; ConnectionUID ="
  + record.getUid ();
  } else if ((coverageStatus & CoverageInfo.COVERAGE_MDS) ==)
  CoverageInfo.COVERAGE_MDS) {}
  Have a book cover and SDM service network
  connectionParameters = «;» deviceside = false;
  } else if ((coverageStatus & CoverageInfo.COVERAGE_DIRECT) ==)
  CoverageInfo.COVERAGE_DIRECT) {}
  Have the network coverage, but no trace of service WAP 2.0 book
  connectionParameters = «;» deviceside = true;
  }

  }
  Return connectionParameters;
  }
  private static {ServiceRecord getWAP2ServiceRecord()
  Full book sb = ServiceBook.getSB ();
  Reviews [] ServiceRecord = sb.getRecords ();
  for (int i = 0; i)< records.length;="" i++)="">
  String cid = records [i] .getCid () .toLowerCase ();
  String uid = records [i] .getUid () .toLowerCase ();

  If (cid.indexOf ("wptcp")! = - 1 &)
  uid.indexOf ("wifi") ==-1 &.
  uid.indexOf ("mms") ==-1) {}
  Returns records [i];
  }
  }
  Returns a null value.
  }

  But I m getting the error below

  Timeout occurred while processing the operation.
  

  Check the log of the unit below

  INFO: File created successfully
  INFO: MyScreen.registerBpas)
  INFO:-step 1
  NEWS :---> conparam:; deviceside = true; ConnectionUID = WAP2 trans
  INFO:

  registerBPAS MSG URL is: http://pushapi.eval.blackberry.com/mss/PD_subReg?serviceid=2350-7la145e5r36mi1n42M6037M9600e95a1155&... trans
  INFO:

  MSG RESPOSE CODE:

  Timeout occurred while processing the operation.

  INFO:

  MSG nextUrl: http://pushapi.eval.blackberry.com/mss/PD_subReg?serviceid=2350-7la145e5r36mi1n42M6037M9600e95a1155&...

  Timeout occurred while processing the operation.

  ; deviceside = true; ConnectionUID = WAP2 trans
  INFO:

  MSG RESPOSE CODE 1:

  Has received a bad request formed.

  INFO: msg BPA rejected registration
  INFO:-isSub: false

  Hi Simon

  His work... Register register & to work...

  Thank you very much for your answer...

  In fact, in connection suffix, I used [deleted inappropriate content]
  

  There must be a hyphen (-) between mds & public, its not allow me to type this text because it's in this forum.
  

  And tested device in...
  

  This connection suffix is transposition BIS & now I am able to register and de-register my app to push.

  But still, I need to test the receiver push message part, once my server implementation is made.

  Once again thanks a lot...

  Thank you

  Lauriane

  
  

• Key registration failure... What does take?

  I received an error "on the registration request", while he was trying to save my keys on a newly developed up Windows Vista.

  Twice I got an error e/s-reason lack of privileges on vista, after you fix, I received the above mentioned error on the third time.

  Is this the end of life for these keys purchased or can a client re - use the keys again after a new installation or registry clean or something else?

  Thanks in advance for your help

  A set of replacement keys can be sent to you.  Please contact [email protected] and they can help you with this.

• CIT400 combined registration failure

  I unsubscribed the handset CIT400 of the base by accident. All my attempts to re - register the handset have failed. I used the sequence suggested in the CIT400 manual (Chapter 3), but nothing has worked. Could someone suggest what to do?

  I have the same problem. Any tips? Resseting its default value is not solve it...

• Windows media center Vista - failure of a component of recording units

  Hi I had a problkems with windows media center.  When I try to start, the following message appears "component registration failure.  I looked at the form post Jan last year.  There is a solution that has worked for the same problem?

  Hello

  Try to check and clean the boot:

  http://support.Microsoft.com/kb/929135

  It will be useful.

• Clean the recording to push with the Blackberry Push server on app removal

  Hi, expert,

  When our application is removed, our application (it's has a background replacement the entry point and it is still running) would detect the deletion and he would try to make a write-off to registration with Blackberry server push. However if the user chooses to reboot immediately (or there is no network connection to that time here), our code could get no time to complete the delisting.  Right now we use registration with http directly to our code. However, there are also pushing SDK that register and unregister through BONE. I know with direct http, it is impossible that OS could help us for cancellation of registration here. What push SDK? OS will of registratioin for this case if OS is the operating system for the registration of the push is deleted? I have found no confirmation on the documentation of push BB.

  Thank you very much for your understanding.

  asked the same question about the java forum and got the answer here: http://supportforums.blackberry.com/t5/Java-Development/Clean-up-push-registration-with-Blackberry-P...

• 'Blackberry Internet Browsing Service' to push the service on device with BES

  Hi, expert, from this link: http://supportforums.blackberry.com/t5/BlackBerry-Push-Development/Push-registration-returns-rc-1000..., we have the Service book called 'Blackberry Internet Browsing Service' or 'BIS-B '. In service to push page, I saw that too.

  It worried me a little. Let's support our agent for device with BES with Push using the blackberry infrastructure. "Blackberry Internet Browsing Service" will still be available for the device associated with BES? If this isn't the case, it would be great forced to use infrastructure Blackberry push service.  I tesed on my device that is associated with a BES, but I'm not sure it will work for all cases. Any confirm on that?

  Pushing to BES only devices is done via the Server BES not BIS push server. This is why companies like the solution BlackBerry because they control their own devices and have the option to only allow the 3rd third party to interact with devices. Some companies allow BIS books on device of service and others not - his company policy.

• Registration - login failed

  Whenever I load Adobe 8 Standard I get a connection registration failure we are unable to connect to adobe to register your product.

  Anyone know how to stop this message from appearing?  Please notify.

  Hi jonm73328124,

  Please refer to this article:- Advanced solutions for connection with Adobe Creative Cloud and Creative Suite applications errors

  Let me know how it goes.

  Kind regards

  Christian

• ehRecvr.exe - Application error the instruction at "0x53801d4f" referenced memory at "0x00000000". The memory could not be "read".

  Message MSVidCtl broadcast system receiver: ehRecvr.exe - Application error the instruction at "0x53801d4f" referenced memory at "0x00000000". The memory could not be "read". This error will not go away and I can not disable or delete the file. How can I stop it?

  Hi SteveGHowe,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  Try to disable and re-enable the Media Center service and check:
   
  a. Click Start. Click run.
  b. type: services.msc and press ENTER.
  c. find Service Media Center Receiver.
  d. right-click on the service and click on stop.
  e. restart the computer and follow the same steps of 'a' by 'c '.
  f. now right-click on the service and click Start.
   
  Also, try the steps listed in the following link:
   
  Troubleshooting steps I use for Media Center component registration failure error

• called when instantiating blackberry.ui.menu.MenuItem

  I create a menu item:

  var regPush = new blackberry.ui.menu.MenuItem(false, 1, "Push Registration", openBISPushListener());
  blackberry.ui.menu.addMenuItem(regPush);
  

  But openBISPushListener() is called during this menu item instantiation. When I comment the lines menu item, the code is not called.

  Any ideas?

  The problem is that you are setting and at the same time execution of the callback function to your menuItem.

  Please see so endearing to the callback method works for you:

  var regPush = new blackberry.ui.menu.MenuItem(false, 1, "Push Registration", openBISPushListener);
  

  Note that I just removed the () on your openBISPushListener.

• Record of codec rejected with VCS

  Hello

  I wonder that I had received rejected registration of VCS when the configuration is done correctly for Codecs and through a model of MST. ICMP, DNS and NTP connectivity between venture capital and the Codecs are very good. VCS registration license is 2500 per device.

  the error I get from the TMS is: "#7422 - Gatekeeper registration failure".

  Thank you

  Hi Jens,

  The logging level should be fixed in the coming x7.2.2 I think. I'll check when I am back in the office, but remember that asked me on the release notes for it last week.

  Thank you
  Guy

  Sent by Cisco Support technique iPhone App

• Error Adobe Muse CC 2014

  Hello

  I have no end of problems with Adobe Muse since the upgrade.  Later happens every time I try to save changes to a site of muse.  Using either 'save' or ' save under ', I get a pop-up window saying 'an error occurred' UID: U3953 and then another window opens indicating: "3125: Save as having failed." 3125: registration failure.  SQL ErrorEventType... "When I click on ok Muse closes.  It does not save the file, but then I have to reopen the Muse who becomes very irritating.

  In addition, every time I open it it tells me a later version of muse is available.  I clicked on install now, CC open and completed the download.  Mac has restarted.  Watch again the window indicating that a newer version is available, while CC is indicating that it is up-to-date.

  It is a bit of a shambles very frankly and very irritating, especially in light of the cost!

  Don't believe that someone clues, or is this a common bug?

  Thanks for your help

  I he stares at me in the meantime the "awesome" of adobe support.