Citrix on vSphere along side other servers

Similar Questions

• IHAVE windows server 2008 standard Edition, but we want to improve it to Enterprise Edition and save the elders allowed other servers how do I do this Action

  Dear Sir
  I have windows server 2008 standard Edition, but we want to upgrade to Enterprise Edition and save old licenses to other servers how do I do this Action

  Thank you in advance

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How to connect to the server ESXI vSphere Client side WAN?

  How to connect to the server ESXI vSphere Client side WAN?

  through firewall

  I tried to open the ports 902 903, 443... and so on...

  and I tried several sites to find the solution but...

  nothing works...

  connectivity works on local network

  Help, please...

  Source Destination Port

  ESXI 443/TCP client

  ESXi 902/TCP client

  ESXi 902/TCP Client

  ESXi 902/UDP Client

  ESXi 903/TCP client

  Edit: Also check if the firewall ESXi all IP addresses are allowed to connect:

  Example:

  See attachment...

• Stuck in troubleshooting (VPN's UP, ping the ethernet router (side lan) works but OTHER SERVERS...)

  I have simple installation of remote access with 2 database accounts local to the router running IOS secure.

  I divided the active tunnel also and it seems to work very well also for users remote vpn vpn users are able to connect and get respective IPs also under their vpn adapter (if we check them thru ipconfig in cmd, windows 7 or any other windows box)...

  Pool VPN: 197.x.x.x (see the config of the pool)

  Inside (Network): 192.168.0.X/24, where 192.168.0.99 is rear facing LAN VPN router's ethernet. LAN segment is L2 and has only 1 vlan, no other subnet is present, the switch of CE500.

  Simply access resouces LAN VPN users and have access to internet through VPN...

  Here is the config: (please EXPERTS,.. .without me know in this case, if necessary...)

  2-router-Internet host name
  !
  boot-start-marker
  boot-end-marker
  !
  Security of authentication failure rate 10 log
  Passwords security min-length 6
  logging buffered debugging 4096
  enable secret 5 $1$ W/jA$ bkFGswtK1q5hs.iRvPgZR0
  enable password 7 12170114190A01162B25
  !
  AAA new-model
  !
  !
  AAA authentication login local_auth local
  AAA authentication login userauthen local
  AAA authorization groupauthor LAN
  !
  AAA - the id of the joint session
  no ip source route
  no ip free-arps
  !
  !
  IP cef
  property intellectual auth-proxy max-nodata-& 3
  property intellectual admission max-nodata-& 3
  !
  !
  no ip bootp Server
  domain IP KAMRAN.com
  name of the IP-server 212.72.1.186
  name of the IP-server 198.6.1.1
  connection-for 60 block tries 5 less than 5
  !
  !
  !
  !
  username privilege 15 password 7 game123 050C07022443580C0B544541
  Dracula username password 7 00051F13075A1902
  Kamran username password 7 01110707500F090033
  Archives
  The config log
  Enable logging
  !
  !
  property intellectual ssh time 60
  property intellectual ssh authentication-2 retries
  property intellectual ssh version 2
  !
  !
  crypto ISAKMP policy 3
  md5 hash
  preshared authentication
  Group 2
  !
  ISAKMP crypto client configuration group omanpost
  Kobayashi key
  pool ippool
  ACL 108
  !
  !
  Crypto ipsec transform-set esp - esp-md5-hmac RIGHT
  !
  Crypto-map dynamic dynmap 10
  Set transform-set RIGHT
  !
  !
  map clientmap client to authenticate crypto list userauthen
  card crypto clientmap isakmp authorization list groupauthor
  client configuration address map clientmap throwing crypto
  client configuration address map clientmap crypto answer
  10 ipsec-isakmp crypto map clientmap Dynamics dynmap
  !
  !
  !
  interface FastEthernet0/0
  The description connected to Internet OMANTEL ~.
  IP 82.178.20.36 255.255.255.248
  NAT outside IP
  IP virtual-reassembly
  automatic duplex
  automatic speed
  clientmap card crypto
  !
  interface FastEthernet0/1
  Connected to the LAN - servers - description
  192.168.0.99 IP address 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  automatic duplex
  automatic speed
  !
  IP local pool ippool 197.0.0.3 197.0.0.5
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 82.178.20.35
  IP route 10.25.50.12 255.255.255.252 192.168.0.100
  IP route 10.26.10.0 255.255.255.0 192.168.0.100
  !
  no ip address of the http server
  no ip http secure server
  IP nat inside source map route sheep interface FastEthernet0/0 overload
  IP nat inside source 192.168.0.10 static 82.178.20.37
  !
  !
  recording of debug trap
  recording ease Committee.2
  access-list 1 permit one
  access-list 108 allow ip 192.168.0.0 0.0.0.255 197.0.0.0 0.0.0.255
  access-list 108 allow icmp 192.168.0.0 0.0.0.255 197.0.0.0 0.0.0.255
  access-list 199 deny ip 192.168.0.0 0.0.0.255 197.0.0.0 0.0.0.255
  access-list 199 permit ip 192.168.0.0 0.0.0.255 any
  sheep allowed 10 route map
  corresponds to the IP 199
  !
  !
  !
  control plan
  !
  !
  Banner motd ^ C this is a box of production for OmanPost to NDC Muscat. Please check you personal authrozied
  ^ C

  Line con 0
  exec-timeout 0 0
  connection of authentication local_auth
  telnet output transport
  line to 0
  exec-timeout 15 0
  connection of authentication local_auth
  No exec
  telnet output transport
  line vty 0 4
  password 7 000F1C0405420A1507280C
  connection of authentication local_auth

  THANKS, waiting with FINGERS CROSSED! « X »

  kAmRan ShAkIL

  Great, looks like a firewall strategy problem windows Server 2008 if you can test of other IPs in the same subnet.

  Please kindly marks the message as answered if you have any other questions. Thank you.

• A domain user can only access Xch2007 servers and blocked access to all other servers in the domain.

  We must put in place a 2008r2 domain user account and allow it access xch2007 email and a file only decidated server.   Access to the other app domain, print and file servers will be blocked.    What will be the best way to do this?   Can we use Group Policy?

  Your Windows Server 2008 R question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question on the Windows Server. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Firewall XP slows telnet and pop requests to other servers

  with xp firewall WE telnet takes about 10 seconds to connect to my linux server. workstation on the same POP form xp server takes about 10 seconds
  with xp firewall OFF it connects instantly
  I've tried doing the fomr even another machine winxp and this problem does NOT occur. So it seems that I have a machine that has a firewall problem
  all windows updates and patches have been installed
  This dbeen has now lasted about a year. time to find out how to fix :)

  Well, for all those interested, ive worked the definitive answer to this problem underway long myself for "xp firewall slows down applications to other telnet servers and pop.

  After doing a few capture and analysis of communication between my workstation and server, I noticed the server sending some 113 applications port to my work in response to the pop stations and requests for telnet access and I think than ftp also.

  Port 113 refers to "ident" username for authentication on the servers running of authentication such as "identd". If the workstation does not respond, then it may delay the connection. The solution is to put an exception on the firewall of my computer such as windows xp firewall to allow port 113 through.

  To do, it is very easy for all of us here are the steps for your Windows XP workstation:

  Start | Control Panel | Windows Firewall | Exceptions | Add Port. 113 TCP Port number. Comment: The authentication of the user name to the server with the ident Protocol

  So there you have it. Finally... INSTANTLY connect and response of the connection for pop, telnet and ftp :)

  Edward Jozis

• How to display all the user_source on other servers from a server admin?

  Hello. Thank you for helping.
  
  
  I am not able to view the source for other schemas locally or on remote servers, depending on the user logged in, only for this scheme, or something like that.
  
  
  I use this command to view the source of a procedure:
  
  
  Select the text line
  from user_source
  When type = 'PROCEDURE '.
  and name = "MY_PROC1".
  online ordering;
  
  
  or this:
  
  
  .. .to go sys.user_source...
  
  
  or this:
  
  
  .. .to go sys.user_source@dblink1...
  
  
  Any suggestions are greatly appreciated.

  You can try sth. as

  SELECT line, text
      FROM all_source@remote
     WHERE TYPE = 'PROCEDURE' AND name = 'MY_PROC1'
       AND owner = 'YOUR_USER'
  ORDER BY line;
  

• Get incremental counter/sound to work along side with action with usb-6008 with labview tia sal22

  Get incremental counter/sound to work along the coast with usb-6008 with labview tia sal22

  Hi all

  I can get this vi to work if they are distinct from the vi but I can't join them together

  Example of my error:

  If buffers are set to 0 the freq counter increment works, but no sound
  If the buffers are set to 1 the audio works fine but is not increment the Freq counter
  If the buffers are attached to more 1 clicks and pops are coming

  That's what I'm doing:
  (1) have the frequency of increment of my internal sound card to a certain level as .01hz a second until he gets to 20 000 hz

  (2) use my device usb-6008 daq, which is connected to the same machine to measure the voltage at the same time. (I am in a position very low voltages between 1-5volts)

  (3) output to a worksheet text file which will show you:

  time in seconds, frequency, voltage
  0,400.01,2

  1,400.02,2.5

  2,400.03,1

  I'm a bit confused about how connect the increment and the audio during the measurements with the usb-6008 housing on the same machine
  at the same time and in the same VI.

  Anyone have any ideas?  I'm using labview 8.5
  TIA sal22

  Ha ha you have been deceived by a dynamic thread. Insert a convert from Dynamic Data Express VI (Palette to own: Signal handling screw Express) between the daq read and build the array function. Then it won't work. Now the value in the dynamic data is only converted to a numeric value

• Photo Story 3 exports don't play well with other servers or video software

  I'm having a time very hard, Photo Story 3 download videos on our video at the request of Kaltura (hyperlink to our system) server. Exporting of YouTube of Papa John tried, but those don't work anymore. Y at - it any other export filter output files do PS3 (.) WMV or other) play nice with video systems like Kaltura? I need to get this working!

  I don't know that I'm dealing with video files. They are .wmv files and they play in Windows Media Player and can be imported into MovieMaker.

  On my Mac (Yes), I have the software installed which supposedly let me open and view .wmv files, but these come only up as audio without the video.
  This backup of my theory that there is something non-standard files generated by photo story .wmv... I have other software, including MPEG Streamclip for Mac OS and Windows, who simply don't like videos.
  Our Kaltura server accepts many video file formats, including .wmv and constantly-error on the photo story .wmv files. Ultimately, I had to put the video in MovieMaker, the export to DV, then convert it to .mp4 before I could do it on our server.
  Thanks for the comments, and @ Samhrutha, I'll repost the forum you suggested.
  -Mike

• How do I create a second account along side my only Admin account? (I have good need?)

  I am new to Vista and Windows7 and all the reading I've done, I'm horrified to discover that I would have had a secondary user account whenever I go on the Internet and perform simple tasks.  (Right)?  I want to assure you that I know how to create the new account user correctly before I end up screwing up my brand new computer.  I lost my last one to a backdoor, OB had total control of my desktop and I have fear of death that does not happen.  Even a little paranoid, you could say!  So I apologize if this is a stupid and perhaps simple question for most of you guys... but for me, I need to make sure that I saw nothing!
  In advance... Thanks for all the help!

  Hello

  Control Panel - user accounts - manage another account - then create a new account

  Make a new ADMIN with password-after it's over - REBOOT (do not just Logoff) and
  Log on to this account. Once you are sure it works at least just REBOOT again to your regular Admin
  account. Use only a new fix and test ONLY, do not use it on a regular basis. You can even make
  Another ADMIN and have a backup of your backup (I do).

  You can then create a user account of same way (same password is easy) and use it as needed. Is it more
  ensure that your other ADMIN - yes - how much depends on how and what you do, but it is a lot or a
  panacea for problems of security. Added that many, including myself, think that it's more trouble that it's worth
  to use a user account when you are the admin.

  Make sure you have antivirus and antispyware when running, Windows Firewall and also have prerequisite programs
  to help you in case of a malware attack and you should be good to go. UAC to work if you feel that you
  need for increased security and don't mind the hassle.

  Practice safe Hex is especially on the do not click on ads and do not install programs and games unless you have
  verifed the sources.

  -----------------------------------------------

  Here's what I use and recommend:  (these are all free and there are other good ones out there programs)

  Avast and Prevx proved extremely reliable and compatible with everything I threw at them.
  Microsoft Security Essentials and Prevx have also proven very reliable and compatible.

  Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

  Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
  (Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
  http://www.avast.com/eng/avast_4_home.html

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
  a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  ======================================

  Here's how to detect malware when and if necessary:

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• cannot ping vmk2 on other servers with jumbo frames

  I had 3 servers esxi 5.1 configure each with 2 NICs vmk - vmk1, vmk2

  vmk1 is on fabA

  vmk2 is on fabB

  the chassis is connected to the FI and the FI, its goes directly to the heart of nexus 7 k. Frames is enabled on the core switches.

  I have CoS of vmotion gold and a Qos policy of gold with the default values shown.

  the problem is each esxi host, when I try to vmkping (vmkping s 8000 vmk1 or ip vmk2), the vmk2 of another esxi host, it does not. but the fact of vmk1.

  I checked my vmnic political and especially on fabB models and they are all set to 9000.

  any ideas here?

  I ping the host local esxi itself and vmk1 vmk2

  Tony,

  One of the things to keep in mind is that traffic of FI - A IF-E passes by the upstream layer 2 network site.  Make sure the LAN past what uplink you also have enabled jumbo frames.

  David

• How to install ubuntu along side windows 8 13.04 (dual boot)

  I have a dell laptop inspiron 5521 with 4 GB ram 1 TB hard drive with windows 8 pro authentic. my hard drive have includes 4 partition (including the c drive). 4th partition which is 71 GB I want to install ubuntu 13.04 (along the coast with windows 8 - dual boot), but whenever I tried to install using USB stick bootable, it shows only 1 hard drive not partition and another option "erase and install ubuntu" which I don't prefer... How do I make double installation?

  Take a look at it here:

  http://UbuntuForums.org/showthread.php?t=2132256

• Install along side the teacher / student version with different Adobe ID

  Hi all

  I have question about installing Adobe cloud the long side of the teacher / student version.  My nephew and niece both live with me, they are students.  He studied computer science and she is pursuing a graphic art or something like that.  She has a student / teacher of an older Photoshop suite version.  Our PC are as follows:

  Niece laptop (1 copy of photoshop suite installed here)

  Computer laptop nephews

  My laptop

  Nephews PC games

  My work / game PC

  Ultra powerful PC (2nd copy of photoshop suite installed here)

  If I install testing creative cloud on my laptop as I type this.  And my work / Gaming PC is powerful enough to run creative cloud as well.

  However, I have built my nephew and niece a powerful PC with processor i7, win 7 ultimate, 32 GB Ram, SSD and Raid etc.  It is used for database and modeling of the type stuff, she uses it for Photoshop suite especially anything dealing with video stuff.

  I would PREFER to install my 2nd copy of the creative cloud on this powerful PC as well.  But not if it's going to mess his photoshop stuff up.  I know when I told him I thought I'd get the new photoshop cs6 cloud, she said his class was not using the new version.  I don't know if it uses cloud stuff or not, but I know that it uses an adobe for adobe ID learn video and this who do not.  If I install this his side my apps will remember my Adobe ID and its apps store his adobe ID or will there be a conflict?

  Thank you very much for the help.

  Scott

  Hi Scott,.

  Having different versions installed on the same computer should not be a problem. Adobe Application Manager will only recognize facilities with the currently signed in Adobe Id for updates.

  -Dave

• A BC site will work on other servers provider´s?

  Hello

  I was just asked by a customer, if he could move his page created with and hosted b.c.., any other provider in the case where he decides that he wants to change to another provider.

  Can anyone help me find an answer?

  Thank you

  Hi Ginoem50,

  Please take a look at this article which will provide you with all the necessary information on how to configure your site to use an external hosting service provider - http://kb.worldsecuresystems.com/157/bc_157.html?bc-partner

  Andrei

• Install Yosemite along side El captain

  My friend has a Macbook Pro of the retina not and currently El captain has installed. Her school then to use called LockDown browser software preventing him from cheating on quizzes online, test etc. He however; is incompatible with El Capitan, so she has to downshift. My question is, is it possible to repartition the drive and install a version of OS lower alongside El Captain like Yosemite? or should I just go the traditional manual way and wipe everything and do a fresh install of Yosemite. My reason for wanting to do it is because it has a 500 GB drive which is almost full, so it would be easier to have to back up your files, I can leave this partition in tact and whenever it requires the software of her school she may just start in Yosemite.

  Thank you

  On the model of Mac, it is possible. Back up the data anyway; the computer's internal reader will fail eventually.

  (138611)