clarification: explanation command weblogicImportMetadata.sh in the file weblogic.properties

Similar Questions

• Error: The file has properties that cannot be copied to the new location

  Hi, I have a problem when copying the files in my windows 7 PC to my Sansa clip 4 GB of sport.

  This error appears when I transfer them to any folder on my sport Clip:

  Are you sure you want to copy this file without its properties?
  The file has properties that cannot be copied to the new location.

  I can click Yes or not (when I click Yes, the file is copied to the new location)

  The reason why I ask is the following:
  The file will be somewhat different after being copied on my sport Clip?
  This is a file audio subliminal message to help me overcome some mental problems, so it would be bad if the file is modified after copying...

  The file plays perfectly and sound quality seems very good.
  However, I still need to know if the file is modified in a way?

  The device is correctly detected, but in the manual it says that when you go into my computer and click on the Sansa Clip Sports, you must click on a folder in the internal memory and then you will find a folder of music.

  But it is not at all a folder in the internal memory...

  When I click on Sansa Clip sport, I see these folders:
  Sound, music, audio books, Podcasts, playlists.
  AUDBOOK. LIB, AUDIBLE. LIB, M3U. LIB, MUSIC. LIB, PODCAST. LIB, version.sdk

  Thank you in advance, I really hope that someone will answer you

  The file properties check the metadata associated with the file.  This error occurs generally when the file was created on an NTFS volume and some of the assosiated with this file metadata is not supported on a FAT32 volume. What you mean actually is not associated with file properties, so it would not be changed.

• What is the command to update ALL the files on a testing server?

  Jen

  Refresh the main folder remotely would do a job?

  see you soon,

  Dreamweaver101.1

  When I download a new HTML file on my server. my 'thinking' is that the server must be updated to a new links work.

  This is not correct.  The server will do things.  But the local browser in which you are viewing this page will be updated to see the cast changes.

• Cannot find the file cvm.properties

  I need to do some debugging of java code, and for that I was reading

  22 test and debugging of the Applications of MAF (version 2.0.0.0.0)

  section

  22.3.5 how to activate JavaScript and Java Code debugging

  It is said

  "A cvm.properties file allows you to specify the start for the JAVA virtual machine and web views MAF settings to activate Java and JavaScript code debugging. "The cvm.properties file is automatically created and placed in the Descriptors/META-INF directory under the Application's resources"

  However, I don't see this file in my application of the MAF.

  An advise please?

  Vik

  OK I used MAF 2.2 where this file is replaced by maf.properties

• Send the file as an attachment in Mail shortcut keyboard

  Hello

  I want to create a keyboard shortcut for the file selected in the Finder as an attachment in E-mail. So when I press the keyboard shortcut, a new message new message appears with the selected attached file.

  This was possible in previous versions of Mac Mail (Yosemite and earlier), but I do not see in El Capitan.

  Please comment

  Rgds

  ~ n ~

  Please open finder and select the file to attach (use keyboard shortcut command + A), copy it (control + C)

  Open mail app, click Command-N a new composition window.

  Finally, click the command + V is pasted the file.

  Thank you!

• I need to pass command-line variables in a file - remoteapp.rdp

  my normal program outside the remote desktop would be

  R-A123456 program.exe

  I could not pass command-line variables in the file program.rdp.

  Program.RDP R-A123456 does not work.

  from the program.rdp file

  replacing the shell: s. ProgramName

  remoteapplicationprogram:s: | ProgramName

  gatewayhostname:s:

  remoteapplicationname:s:ProgramName.exe

  remoteapplicationcmdline:s:

  Help

  Server 2008 R2

  XP Professional SP3

  Hi John,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Category of the Windows Server

• I just want to know if there is a problem if I delete the files '%Temp%' race

  Hey guys, I just want to know if there is a problem if I delete the files '%Temp%' run! ???

  Free disk space
  Last updated 18/01/2014
   

  Content

  • To see how much space you have used and free
  • To see where the files are too much space
  • Disk Cleanup
  • System restore
  • Fix the basket
  • Fix temporary Internet files
  • Delete files in the system and the folder Temp of Service Profiles
  • Check the size of the swap file
  • Disable the hibernation
  • Compact the Windows databases use various
  • Delete the files updated by the Service Pack
  • Move your Documents
  • Remove saved files created by Photo Gallery
  • Which extends the size of the disk
  • Compress files
  • Turn off the low disk space warnings
  • Boost disk cleanup
   

  To see how much space you have used and free

  Start - All Programs - Accessories- Click with the right button on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  For the system drive

  WMIC volume where (DriveLetter = '% lecteur_systeme %') are legend, capacity, freespace List

  For all readers

  WMIC volume get/all, freespace, the ability, the legend

  If you want to store this info on your desktop

  WMIC /append:"%userprofile%\desktop\Free on disk space" volume get Caption, freespace format:htable

  To open double click on Free Disk Space on your desk or type

  Start "" "%userprofile%\desktop\Free report.HTML of disk space.

  Then come back here after cleaning and repeat these commands to see the difference.

  If for any reason, the wmic command does not work, use these two commands. Both take a lot of time.

  % Lecteur_systeme % - one defrag

  or

  dir %systemdrive%\*.*/a/s

   
  To see where the files are too much space
   
  It lists the number of files and the size of the folders on your drive. Each command is a subset, so you can run it better.
   
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
   
  Then configure the command prompt. Right-click on the tab of the titlebar - Properties - Layout command prompt - and enter 1000 screen buffer size height and 43 (or 50) to Window Dimensions height. Change the color (color tab) and the police (police tab), if you want.
   
  To see the size of the folders in Documents, excluding images, video, or music files.
   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Personal"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "\/"^|findstr/l/v "photos video" ') @echo %j & echo. "

   
  To see the size of the folders in the music.
   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My music' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the image files.

   

  for /f "Skip = 2 tokens = 4" %A in (' Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" "My pictures" /v ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files in the video.

   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My videos' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files on the desktop.

   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Desktop"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

  To see the size of the files in the Windows folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%windir%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   
  To see the size of the files in the Program Files folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%ProgramFiles%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

   

  Disk Cleanup
  To run Disk Cleanup, normal is to click with the right button on the drive in my computer (Start menu - computer), then Properties - general tab - Disk Cleanup button.
   
   
  Another way is menu Start - All Programs - Accessories - System - Disk Cleanup tools.
   
  Disk Cleanup can be started from the command line.
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   
  To make your primary drive.
   

  cleanmgr letter

   
  Choose which lead to do.
   

  Cleanmgr

   
  See the last section of this post to see how to performance of disk cleanup.

   System restore

  With disk cleanup displays above the Other Options tab. You can delete all but the last System Restore point and see if that is too much space.

  System Restore uses 15% of the space normally. Change click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit and navigate to

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg

  Double click on DiskPercent and click on decimal and change the value to the desired percentage,

  You can change the command prompt.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the system restore folder.

  You don't normally have access to this folder. You will need to take possession, allow administrators to permission, then the size of the query.

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  dir "%systemdrive%\System Volume Information" / a/s

  To see the current percentage

  Reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent

  It is in hexadecimal. The numbers are 0-9 and a-f. So 0xf is 15. 0x5 is 5, 0 x 9 is 9, 0xa is 10, 0 x 14 is 20.

  To set a different value.

  You can use decimal values to set. This affects 10% (in bold in the example and the last item in the line).

  Tracking Add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent /t REG_DWORD /f /d 10

   
  To repair the system restore, file delete and restart the system restore.
    

  SC stop vss

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  e "%systemdrive%\System Volume Information" / q/s

  SC start vss

  Fix the basket

  Sometimes, files get lost in the trash. Remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.

  Empty the trash.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the files in the Recycle Bin

  It must have one or no files inside if you work. There should be a directory (folder) by user.

  dir % systemdrive%\$RECYCLE. BIN\ *. * /a /s

  To reset the trash

  e % systemdrive%\$RECYCLE. BIN/s/q

  Fix temporary Internet files

  Sometimes, files get lost in the temporary internet files folder. Delete the files. It will be automatically recreated the next time download you. It will remove the current user only.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the temporary internet files size empty files folder

  RunDll32.exe InetCpl.cpl, ClearMyTracksByProcess 8

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» * ' / a/s.

  Then delete.

  First close Internet Explorer. Some files may not remove at the moment, they can be deleted later.

  "%userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files" del /s /q

  So to see the new size.

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» * ' / a/s.

   
  To see the size of the cache, type the following
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  Reg query /v "Settings\5.0\Cache\Content Software" CacheLimit valid

  Use the calculator to convert hexadecimal into decimal. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter the value returned above. Menu display - decimal. To convert windows units divide by 1024 for kilobytes, divide by 1024 megabytes.
   
  Located between 50 MB and 250 MB. You can use decimal here. The unit is expressed in kilobytes. Here it is 250 megabytes (250 000 x 1024 bytes)
   

  Add tracking 'Software Settings\5.0\Cache\Content' v CacheLimit valid /t Reg_DWord /d 250000 f
  

    

  Delete files in the system and the folder Temp of Service Profiles

  The system temp folder is only used when no one connects. It is rarely used but never cleaned. Some services have their own temporary folder which is also cleaned.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To the list

  dir c:\windows\temp C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp/a/s

  To remove

  del C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\*.* C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp\*.* c:\windows\temp\*.*/s/f/q

  Check the size of the swap file

  As a rule generally you want to your swap file slightly larger than the amount of memory that you have. It develops automatically but spread automatically. If you use hungery memory programs as this video editing should be bigger. If too big you can reduce and rush of space can be moved to another drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see what was your use

  WMIC pagefile get List

  To see the size of the file on disk

  dir /a c:\pagefile.sys

  To change the size or change the road see change the size of virtual memory in Start - Help and Support.

   

  Disable the hibernation

  The file shows up is the same size of installed memory. If this is not the case, turn off the computer in hibernation and save a lot of disk space.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see if it is on

  If the file will be found. If off the file won't be there.

  dir %systemdrive%\hiberfil.sys /a

  To turn off

  powercfg-h off

  Make a u-turn

  powercfg-h on

  Compact the Windows databases use various

  You can compact the various databases that Windows uses. This is the Windows Update, Windows Search, and certificates of security, Windows Mail, Windows Contacts, Windows, Windows Live and Internet Explorer ver 10 applications calendar.

  Close Windows Mail and Internet Explorer. Wait a minute for Internet Explorer release locks of sound files.

  See how much space taking up type which is below and note the total size (because it scrolls away).

  Start - All Programs - Accessories- Click with the right button on command prompt and choose Run As Administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  Then at compact

  SC stop wuauserv

  stop bits SC

  SC stop wsearch

  SC stop cryptsvc

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /p "%A" / o

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /d "%A".

  SC start cryptsvc

  SC start wsearch

  SC start bits

  SC start wuauserv

  Then to delete some temporary files.

  del c:\*.integ.raw c:\TEMPDFRG*.edb/s

  To see the new size and compare it to the old size

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  If a program has a file open, you can use this procedure to find out which program.

  openfiles/local on

  Reset

  openfiles/query /v | findstr /i "WebCacheV [0-9] *------catdb \.edb \.msmessagestore .dat".

  Delete the files updated by the Service Pack

  See how much space taking up type which is below and note the total size (because it scrolls away). Also, note that the total is higher than it actually is.

  This will remove the ability to uninstall service packs.

  According to the service pack that Windows was provided with you can have both, one or none of these two files.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir /a /s c:\Windows\WinSxS

  Then type

  Vsp1cln.exe

  COMPCLN.exe

  To see the new size and compare it to the old size

   

  c:\windows\WinSxS dir /a /s

  Move your Documents

  If you have another disk, you can move the documents folder to it.

  Click with the right button on your Documents (or pictures, etc.) Office, videos, Contacts,) the tab file - Properties - location - move.

   

  Delete the thumbnail and icon Caches

  These files can contain thumbnails or icons of files deleted a long time ago. The files will be recreated if necessary.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste). The desktop and the start menu will disappear briefly.

  To see the size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

  then remove

  Taskkill /im explorer.exe/f
  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  
  attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.
  del "% userprofile%\AppData\Local\*.db".
  del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".
  Explorer

  to check the new size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

   

  Remove saved files created by Photo Gallery

   

  Photo Gallery Windows makes a copy of any file that you are editing. Click Start - All Programs - Accessories - (or press the Windows key + R). Type

  Images of the hull: original

  Delete the ones you don't want.

  Which extends the size of the disk

  If all the space on the disk has not all been used it is possible to extend your drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  DiskPart

  then type

  Select the c volume:

  Then type to see in size

  the list volume

  then (it will work if possible or not as appropriate)

  extend

  type to display the new size

  the list volume

  then type exit

  output

  If you want advice on the extension of the partition type the following and paste the result back

  DiskPart

  list disk

  the list volume

  Select disk 0

  partition from the list

  Select disk 1

  partition from the list

  output

  To copy the final text right click in the window - Mark , then select the text and press enter.
   

  Compress files

  There are two ways to compress files in windows. Zip files and built-in file compression. It's built-in file compression. For more information on compression type zip in Start - Help and Support .

  Photos, music and video are already compressed. They can get larger if Windows tries to compress it any further. Also usually a bad idea to compress system files.

  If you have files of worksheet they can very well be compressed. If you have files, installation files, they can also be good candidates. Web pages are also good candidates.

  In Windows Explorer, blue file names means Tablet (it is the file system compression not aka zip files compressed files). Green filename means Encrypted.

  To disable file names colored, in Explorer - Tools menu (Alt + T)- display tab and then clear the check box for Show encrypted or compressed NTFS in color .

  Windows compression, encryption and security to work for the most part by applying attributes to a folder and the files in the folder inherit the folder.

  If you have all the files appropriate for compression, find them in solution, made Explorer right click - Properties - general -Advanced button tab - Compress contents to save disk space. Choose to apply to all files and folders when asked.

  To use a command line to compress the files in the Favorites folder.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  compact/c /s:"%userprofile%\Favorites." *

  Put in Favorites to compress files added

  compact/c /s:"%userprofile%\Favorites.

  To view the details of the compression of the Favorites folder

  Compact '% userprofile%\Favorites\*.* '.

   

   

  Turn off the low disk space warnings

  To disable the function to display the disk low space warnings.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer" v "NoLowDiskSpaceChecks" /t REG_DWORD /d 1 f

  gpupdate/force

   

  Boost disk cleanup

  • Operation of disk cleanup
  • Schedule disk cleanup
  • Creating custom cleaners

  To see a list of products of cleaning disk cleanup.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  @echo. & @echo list of cleaners&@echo = & FOR /F "usebackq tokens = 8 delims =-' %i IN ('reg query 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches'") @echo %i

  
   List of cleaners
   ================
   Active Setup Temp Folders
   Content Indexer Cleaner
   Downloaded Program Files
   Hibernation File
   Internet Cache Files
   Memory Dump Files
   Microsoft_Event_Reporting_2.0_Temp_Files
   Offline Pages Files
   Old ChkDsk Files
   Previous Installations
   Recycle Bin
   Setup Log Files
   System error memory dump files
   System error minidump files
   Temporary Files
   Temporary Setup Files
   Temporary Sync Files
   Thumbnail Cache
   Upgrade Discarded Files
   Windows Error Reporting Archive Files
   Windows Error Reporting Queue Files
   Windows Error Reporting System Archive Files
   Windows Error Reporting System Queue Files
   WLX Thumbnail Cache
  

   

• Order findstr/l/s/m print the file names of all the files in the directories and subdirectories despite any string contained

  Hello

  I'm looking for a file via the findstr command. After that I opened the command as Administrator window, I get:

  Findstr/l/s/m 'a string containing the words. " *

  Then, the command window displays all the files in the directory and its subdirectories. I think that I see which file is searched for the chain in real time.

  I expected to see only the name of the file/s if the string was found in it.

  What I am doing wrong? or why is this malcfunctionaning?

  I got directions for ordering findstr here: https://technet.microsoft.com/en-us/library/bb490907.aspx

  Thank you

  I think you want the /c parameter instead a / l.  As written, your search string is interpreted as a list of strings: 'a', 'string', 'with' and 'words '.  Any file that contains an 'a' will be a return match.  The parameter/l keeps your strings to be interpreted as regular expressions.

  If you need exactly match to the entire chain, type:

  Findstr /s/m/c: "a string containing the words." *

  Under the direction of add: It is not clear, but you can have several settings/c , to search for more than one exact string at a time.  For example:

  / s/m/c: 'a string' findstr / c: "a Word." *

  Research is 'a string' or 'a word' exactly.

• Windows 7 search is not finding I know that the files are there.

  When I search from the Start button, Windows cannot find known files in 'My Documents'.  However, if I choose the "see more results" option and then choose ' search again: computer, I find all the files. "  What could be wrong?

  Help please!

  Hi John,.

  This occurs only in a specific file type?

  Possible causes for this issue:

  1. the type of file is not indexed

  2. the file has properties that prevent it from be indexed

  3. the indexer has not yet inserted the file in the index

  4. the indexer is overlooking the file

  Step 1: Run the search and indexing of troubleshooting for this problem automatically

  Open the troubleshooter for search and indexing
  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Let me know if it works or you need help

  This may interest you

  ImproveWindows searches using the index: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 - access to the file permission problems

  I have a new laptop of Dell M4700 with Windows 7 64-bit, and file access permissions are create chaos.

  When I open a file for editing, the computer only wants to save - under a different file name, not simply to save the existing file.  This occurs in Notepad and several other programs.  It's the same thing that hit the button "save under" instead of simply register.

  Several times at the opening of files, in particular on external drives, the file will only open read-only.  I can copy the file to the local hard drive, and it works normally.

  So far, I tried the following:

  • I have administrator rights.
  • I went through and all the property of the files changed for me.
  • Make the read-only attributes of course removed
  • Run programs as an administrator
  Any help to resolve this would be greatly appreciated.

  Looks like you don't have permission in writing to these files.

  To resolve or explain it, you look at the permissions on the file/folder and they are explicitly defined or inherited from the parent folder (or higher).  When it comes to permissions, administrators are users like everyone else.  Directors may be refused or permissons to files or folders like any other user.  Even the file owner can change permissions such as he is denied access to its own folder.  The only advantage that owners and managers have is permission to change permissions.

  You need view the permissions currently in effect for that file.  Usually, this is done:

  Right click on the file / folder-> properties-> tab 'security '.

  At the top will be list users and groups with permissions and if you click on it, the bottom window displays their permissions.   Learn more about this everything is there:

  "Together, see, change, or remove permissions on an object.

  <>http://TechNet.Microsoft.com/en-us/library/cc731667.aspx >

  This will lead to other links which provides information on how to set permissions.

  HTH,

  JW

• Adding file names when using "combine the files supported in acrobat.

  Adding names of files when using "combine the files supported in acrobat.

  Is this possible?

  Either as a note at the bottom of each page or a note on the print?

  Without having to write or copy and paste the names of files in the PDF by hand?

  As in "automatically"?

  What it is for:

  I do guides step by step for some software for computer magazine.

  I am taking screenshots of the software and they are sent to the art director as a bunch of .tif files to be used for layouts.

  I need to be able to show him where to put the numbers (1,2,3 etc) for steps-by-step and where he can cut the screenshots.

  I am therefore files .tif Guide to the artistic director. Using Acrobat 9 Pro I can easily combine all the .tif files into a PDF with the extension of the shell "Combine" supported files in acrobat.

  And using the comment & markup tools, I can easily ad numbering, arrows, important areas and so on.

  However, these guides often include a lot of screenshots, so it is important for the Artistic Director to be able to quickly identify each screenshot. And for that he needs the name of the original .tif file to follow the screenshot in the pdf. So that when printed out the pdf and made his page layouts, there no browse and compare a pile of screenshots without a name.

  When you combine files in Acrobat format (in flat PDF rather than a portfolio), you will get bookmarks for each document referencing the original file name. If they are not displayed, click the button in the dialog box Options combine to turn them back on.

  Since you're combining a series of pictures, you'll find yourself with a bookmark for each page - so the value seen initial of your PDF "bookmarks and page Panel" to file on the file > box properties dialog and you have close to what you want. Write the names of files in the footers is possible but requires script to extract the bookmark names and page numbers, then write a watermark on each page.

• How to find the password for the embedded weblogic Server

  How to find the password for the server weblogic shipped from jdeveloper please?

  User, please tell us our jdev version!

  You can't find. Once he lost you can set a new one. For this you can either remove server embedded weblogic (delete the DefaultDomain file in the folder system11.1.1.x.x.x.x.) either you go to the system11.1.1x.xx.x/DefaultDomain/servers/DefaultServer/security folder and open the file boot.properties and delete the encrypted user name and password values and enter the new values for them in normal character. Save the file and restart the integrated server. Connection with the new username and password and it should work.

  The new user name and password are encrypted automatically.

  Timo

• The list of permissions of the files using the command line

  Hi all

  My windows operating system is windows Server 2003 R2.

  Now, I'm trying to find a solution that can display all the permissions of the file of each folder and its subdirectory by using the command line syntax.
  I tried to use ICACLS to solve this problem, but its result contains the permissions of all files/folders. I just want to have the permission of files, not the permissions of each individual files.

  Is it possible to just show the permissions of folders with ICACLS? If it is possible, what sentence from command line?

  However, I also looked at Systinterals AccessChk and AccessEnum without finding a solution.

  If you have no good solution, please share with me.

  Advanced thanks.

  Hi Leo,

  The question you have posted is related to file permissions in Server 2003 and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winserversecurity/threads

  Hope it will be useful.

• What makes "new queue path" to write to the File.vi worksheet? I need a better explanation than what is given.

  You are looking for assistance.

  What makes "new queue path" to write to the File.vi worksheet?  I need a better explanation than what is given.

  Thank you.

  You can call this function without wiring to a path of the input file.  If this is the case, the function prompts the user for input file using a pop up dialog box.  If a file is selected and you press OK, it is the path of the file that is out of the function as the new path of the file.  If you press the button cancel instead of OK, the "not a path" constant is the new output file pathname.  If the function is called with a wired file path entry dialog box appears, the same path of file entry becomes the new output file path.

• The application's command line arguments get the path to the file in windows Explorer

  Hello

  I am trying to open a file with my labview application .exe, so I thought that windows was sending the file path double clicked in Explorer solutions in the form of argument, but all I get is the name of my exe file.

  

  Does anyone know how to set up windows or the application to get the double click path from the Explorer, which has the file extension has already been associated with my exe?

  Thank you!

  I'm not sure I understand, but I think you want your Labview program to open another file, as a file of perimeter?

  Have three basic choices.

  Hardcode the path with file name in your program http://zone.ni.com/reference/en-XX/help/371361K-01/glang/path_constant/

  Use the file open vi and for the user to select the file to open http://zone.ni.com/reference/en-XX/help/371361J-01/glang/file_dialog/

  Write your program to accept a http://digital.ni.com/public.nsf/allkb/17C3AD70493CE0208625666A00763364 command line argument