Clarification of the NAT rules

Similar Questions

• helps the nat rule

  Hello

  I try to create a second VPN connection on our companies cisco PIX. It almost works, but I'm having problems to make the nat rules to work for two virtual private networks.

  The config is attached, but the key areas are below.

  Access extensive list ip 192.168.60.0 LeasedLine_20_cryptomap allow London 255.255.255.0 255.255.255.0

  LeasedLine_40_cryptomap list extended access permitted ip object-group LAN_subnet-group of objects InsightLAN

  NAT (inside) 0-list of access LeasedLine_20_cryptomap

  NAT (inside) 101 192.168.60.0 255.255.255.0

  NAT (DMZ) 101 172.30.60.0 255.255.255.0

  NAT (GM3) 101 192.168.70.0 255.255.255.0

  card crypto LeasedLine_map 20 corresponds to the address LeasedLine_20_cryptomap

  card crypto LeasedLine_map 20 set peer 161.xxx.106.34

  LeasedLine_map 20 transform-set ESP-3DES-MD5 crypto card game

  card crypto LeasedLine_map 40 corresponds to the address LeasedLine_40_cryptomap

  card crypto LeasedLine_map 40 set peer 213.xxx172.253

  card crypto LeasedLine_map 40 value transform-set ESP-AES-128-SHA

  The problem I have is with the nat 0 command (inside). If I add the command

  NAT (inside) LeasedLine_40_cryptomap 0-list of access VPN 2nd (insight) works, but the first stops working.

  Can someone help me get this to work?

  See you soon,.

  Al

  Hello

  You can have several configurations that have "(inside) nat 0 access-list"

  Instead, you use a simple ACL to set the traffic you don't want NAT. Or for which you want to NAT0.

  If you can do this for example

  the INTERIOR-NAT0 extended ip 192.168.60.0 access list allow London 255.255.255.0 255.255.255.0

  access list to the INSIDE-NAT0 extended permitted ip object-group LAN_subnet-group of objects InsightLAN

  NAT (inside) 0-list of access to the INTERIOR-NAT0

  And the two connections should work perfectly.

  If you arrived to set up a third-party VPN connection for example you would simply add another line to the same LIST.

  Hope this helps

  Don't forget to mark the reply as the answer if it answered your question.

  Ask more if necessary

  -Jouni

• Allowing OWA NAT rule breaks the Web page links

  We organize our own website (old IIS 6 on Server 2000) and it works fine using a new sonicwall TZ 500 with public server installation wizard based.  We also have on site Exchange 2003.  When I followed the article https://support.software.dell.com/kb/sw4535 OWA works fine, but now all links to other pages on our site are broken. As soon as I turn off the NAT for OWA policy and links to the site running again.  Would welcome suggestions for a fix.

  The only question I expect eventually, is that your OWA uses the same ports as the server else so now that traffic is missing each achieved.

  Thank you
  Ben D
  Reference Dell SonicWALL
  #iwork4Dell

• Seeking clarification on the SFD in AKM Brushless Servo Drives

  Dear members,

  I'm looking for clarification on the smart feedback device (SFD) installed in the series of servomotors AKM. There is little information available on this subject in the specifications. It appeared that it offers a very high resolution, information on the position of the rotor high precision signals.

  1. how exactly is the PCG provides the position of the rotor?

  2. is there a provision to contract low resolution effect Hall of EPD type feedback?

  Thank you.

  Ansari07

  Hi Ansari07,

  I don't think that this level of control is possible with the AKD. The reader is supposed to close its own current loop on board for the control of switching and outputs of phase. The AKD offer couple, speed or modes of control position, and you can talk to it by Ethernet on the service port, via a field such as EtherCAT or CANOpen bus, or with an analogue signal +-10V or step/dir commands.

  I don't think you can get around all of the internal firmware in the AKD and get direct control of how current passes through the phases.

  Best regards

  Nate

• Cisco has a software or a device can save the NAT information?

  Hi experts,

  Here's a government rule in our country, to provide at least 90 days NAT balls (or source called traces) if the market or the hotel provides internet services.

  I just want to know, just about any device cisco can does support this?

  ASA or firepower with ISE and internal drives?

  Thank you very much.

  Of course, ASAs will record all the NAT actions they take. Also all the connection records - assuming that you have logging enabled at the correct level.

  You must send your syslog events to an external server for the archiving of history.

  See something like suggesting this thread:

  https://supportforums.Cisco.com/discussion/12515061/show-NAT-tranlations...

• Cannot delete a NAT rule

  Hello

  I make a mistake typing in CLI a NAT rule and I can't delete it because this tells me is that it is used...

  UC540 (config) #no ip nat inside source static A.B.C.D interface Dialer0
  % Input static to use, cannot be deleted

  An idea for there remedy?

  Thanks in advance,

  Roman

  Hello Romain,.

  I'm really not an expert on IOS, but I found cel on Google don't know however if it works:

  "You may need to remove the nat inside and nat outside interface command, and then clear the translations until you can remove it. "This is an example of SDM:

  interface Ethernet0
  no nat inside ip
  output
  interface Ethernet1
  No external ip nat
  output
  do not delete ip NAT. forced translation
  no nat ip inside source static tcp 172.16.5.2 interface Ethernet1 3389 3389
  interface Ethernet0
  IP nat inside
  output
  interface Ethernet1
  NAT outside IP
  output

  Nice day.

  Dominique.

• Asymmetric NAT rules

  I am trying to configure another ipsec VPN group and political.  So far, I can communicate with her, and I can ping the ASA 5505, but nothing else inside.  The funny this is that I have another configuration group and the policy that works very well.  I tried to imitate him, but I can't understand what I'm doing wrong.  I get this error in the log:

  Asymmetrical NAT rules matched for flows forward and backward; Connection for icmp src, dst outside: 10.4.71.104 inside: 10.4.70.2 (type 8, code 0) rejected due to the failure of reverse NAT.

  A network diagram is attached.  Thanks for your help.

  Andy,

  Yes 8.3 makes a difference

  Well I can suggest a few ways out of it.

  And that's what you need to add... kind of nat provides previous versions.

  NAT (inside, all) source static obj - 10.4.70.0 obj - 10.4.70.0 destination static obj - 10.4.71.0 obj - 10.4.71.0

  Edit: fixed IP addresses. If 10.4.70.0/24 is local and remote 10.4.71, you need to add an exemption here.

• vShield Networking - configure NAT rules directly in vShield Mnager

  Hello

  I tried to configure a NAT rule to enable access for external network users that is not routable vsphere Client i.e. the plugin for vShield manager to the internal network. I have found no documentation for this. Now, if I place a load balancer it automatically creates a NAT rule. Don't know why I can't do the same thing using NAT exclusively. Someone out there who has done the basic NAT using vShield Edge between 2 distinct networks (L2)?

  I realized what was wrint with my setup. The EDGE is deployed in a lab where we have the internal network, access to the outside, but not the reverse. Thus, we had another gateway on the virtual machine and therefore return traffic never returned to the edge gateway. If it was a problem with my knowledge of NAT.

  Next article helpde much:

  http://kickingwaterbottles.WordPress.com/2013/08/12/hairpin-NAT-NAT-Hairpinning-with-VShield-edge/

  Thank you

  Mohit Kshirsagar

• sequence Analyzer: data transfer between the Analyzer rule one sequence to another

  Is there a way by which I can send data to the Analyzer rule a sequence to another.

  I've created rules to count the number of SCOPE, step REQUIREMENT TEXT step, step in the PROCESS

  Now, I want to create another regulation that reads the values of each of these rules

  Tah44-

  One of my colleagues brought a different, probably better idea to my attention this morning:

  Use the AnalysisContext.GetRuleAnalysisData method to access the data of other rule analysis: http://zone.ni.com/reference/en-XX/help/370052P-01/tsref/infotopics/sa_creating_analysis_modulesimpl...

  -Jeff

• In all the hearts of Windows games, it seems that they do not know the rules. The Queen of Spades is just like a heart in the real rules

  In all the hearts of Windows games, it seems that they do not know the rules.  The Queen of Spades is just like a heart in the real rules. I don't have to play the Queen.  If hearts have been broken, and all I have left is some hearts and the Queen of Spades, I can play a weak heart rather than being forced to play the Queen.  The windows game apparently does not know this rule.

  original title: rules of hearts

  Hello

  Actually if the Queen of Spades breaks hearts and cannot therefore be considered a heart
  is optional. The basic rule is that the Queen of Spades does not break hearts and must be conducted
  If a player has the Queen of spades and still hearts if hearts have been broken.

  My preferences are the Queen of Spades or a heart can be played on the 1st round Sub in the Clubs.
  And the Queen of Spades does not break the hearts and must be conducted if only he and hearts are
  left in the hands and hearts have not been broken. Those who make for much more difficult game
  MY HUMBLE OPINION.

  Hearts
  http://www.Pagat.com/reverse/hearts.html

  Hearts, the rules
  http://www.toycrossing.com/hearts/basic-rules.shtml

  Hearts
  http://en.Wikipedia.org/wiki/hearts

  Hearts
  http://www.kemenel.org/cards/hearts.php

  Plays in the heart and stings for years, but the bridge is even more fun.

  Bridge Base online - play for free at all levels (beginner to the World Champions and yes the world
  Champions play there - it has same vugraphs live tournaments around the world - free.)
  http://www.bridgebase.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• MFP HP LaserJet Pro M126nw: Clarification of the use of HP Laser Jet MFP M126 nw Pro Page

  Hi support them.

  Recently, we bought a new HP Laserhet MFO M126nw Pro. The cartridge came with the new printer. I need a clarification of the HP Laserjet Pro MFP M126nw on the usage Page.

  We want to know how many pages that the printer has taken so far, printing and also how many pages is analysed and the copier took how many pages.

  I have attached the report using page for your reference.

  Please specify the things below.

  Pages for the scanned copy = 65

  I think he has counted only scanned copies 65.le is okay?

  2. What is Monochrome pages printed from copy = 66

  3. What is pages scanned host = 86

  4. print engine:

  1. total Impressions showing 829.

  Overall, I think it's showing printing, copier, 580 the scanned pages. Is this OK.

  2. What is jam events?

  It's showing 1.

  3. What is EconoMode Impressions?

  showing 0.

  4. What is monochrome prints?

  showing that 829

  Need to clarify the details above for my knowledge.

  Your support is much appreciated.

  Thanks in advance

  Concerning

  R.Pradeep

  the digital and print values are different.

  pages scanned copy 65 - this means that 65 pages have been executed by the scanner with someone using the copy function. the report shows 66 printed pages 'copy' which means 64 of these copies were only a single copy and 1 scan someone made 2 copies - which gives you a total of 66 pages printed from the copy function.

  pages scanned to accommodate 86 = that means 86 pages were executed by the scanner with a person who uses the "scan to network folder" or "scan to computer" function

  That's a total of total of 151 pages run through your scanner. only 2 values that you add to the scanner are the "copy" and «scan to host» numbers copy of 65 + 86 scan-to-host ='s 151 total scans

  total impressions are 829. pages printed from copy fuction are 66 - if you subtract 66 829 that gives you the number of pages that have been printed from a computer = 763

  763 pages printed computer + 66 pages printed using the copy function = 829 total number of pages printed

• When I disable the NAT on my WRT160N I can't access the Internet

  Hello

  I had my WRT160N set up and great to work for months.  I had a few non-cable problems and the Cable Guy split my cable and now I have a specific modem just for the internet.  I can connect to the internet directly and great wireless!  However, I went into my XBox 360 to play some Halo 3 and he yelled at me that I have to disable the NAT.  I thought it was weird because my WRT160N is still the same piece of material and I think that's where I have disabled the NAT months ago and that he should always have this same setting.  Apparently not?  So I connected to it and of course it has been activated.  I disabled it and now I can connect is no longer directly or wireless internet.  Of course, if I set it to active NAT so I can get to the internet again.  I need to disable NAT.

  Don't know what to do here.   Is it possible on the modem cable (Time Warner Cable) where the problem lies?  HE would have a configurable parameter for the NAT?

  Any suggestions would be most appreciated.

  Kevin

  Make the following settings for X - Box...

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...

  On the Configuration tab change the size of the MTU to 1365, then click on save settings...

  Click the 'Administration' tab and disable UPnP and click on save settings...

  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...

  (2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  3) click on Setup and change the size of the MTU to 1452 and click on save settings... Click the status tab, and take note of DNS1 and DNS2 address...

  (4) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

  (5) also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...

  (6) turn off your modem, router and Xbox... Wait a minute...

  (7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

• How to open the NAT for a Linksys 160N with a WRT54G2 wireless ethernet bridge?

  Hello, I have a Linksys 160N2 router, and I hooked a version w / updated router Linksys WRT54G2 {v24 sp1} DD - WRT.  It worked great, but now my sons xBox 360 States that the NAT is moderate and should be opened.  I don't know how to open the NAT.  Any help will be greatly appreciated.

  This do-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...

  (2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  3) click on Setup and change the size of the MTU to 1452 and click on save settings... Click the status tab, and take note of DNS1 and DNS2 address...

  (4) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

  (5) also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...

  (6) turn off your modem, router and Xbox... Wait a minute...

  (7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

• Windows 7 firewall, just after the power rules

  Hello

  Setting up a private workgroup-to-peer network (not homegroup, no servers or domain) of several PC windows 7.  Have all network connections, defined as 'private' of networks.  At that time, the private firewall is disabled, and the Public firwall is enabled.  Administration tool using remote third 3rd RAdmin connect and control the PC.

  Strange behavior just after turn on/off the PC.  Can ping from one PC to another, but RAdmin tool fails to connect to a PC on just.  The 'Public' windows firewall log shows the RAdmin TCP packet dropped.  Once someone has logged on locally to the computer and then connected to the wide, the RAdmin packages are no longer considered (fell or permitted) by the Public firewall, and the RAdmin progam works great.

  I added a test rule to allow all TCP traffic through any firewall from any PC, any user, any port, etc. (essentially large open) and still have the problem where RAdmin specific TCP packets are lost by the Public firewall.

  I can get it to work by setting the 'incoming connections' for the Public firewall to 'Always allow', but is not an acceptable solution.

  I worked with the provider of 3rd party s/w (famatech) and they also have no idea why it works this way.

  Any ideas how the Windows 7 firewall works right after that the PC is on, but before the user login?  Any ideas how can I do an acceptable firewall rule which will be in force after powering on, but before that the user log?

  Thank you in advance for any help or any other ideas,

  Rick

  Answered my own question.  Found that a set Local GPO do not merge rules defined by the user.  When I moved the RAdmin rule throughout the local Group Policy object, problem goes away.

• Clarification of the policy of startup SAN

  I would like clarification on the policy of SAN Boot. I was always under the impression that you were supposed to use the storage port WWPN. But what happens if you have many ports of storage from the table (16 for example), this is not possible.

  The purpose of this policy is to simply force the HBA to open a session in the SAN fabric?

  If Yes, can I use one of my real picture or just make one, correct?

  Since all zoning is done by the SAN switch (Brocade/MDS/Nexus) and LUN masking to the level of the table, I think putting the real WWPN to a storage port is not necessary.

  Thanks for any clarification.

  Yes, a 'false' WWPN will work and they connect to the SAN infrastructure... Photos attached show 2 ways to do this... However, if you install Windows 2012/Hyper-V, I suggest using WWPN valid because it seems not to be able to manage multiple ESX possible access paths when you first install...