Clarify the ClearOverrides

Similar Questions

• You want to clarify the whole picture except for a small area - using a MAC PS thanks CC!

  You want to clarify the whole picture except for a small area - using a MAC PS thanks CC!

  The target of the layer mask.

  Use the paint brush tool

  Use black paint

  paint over the area you want to return the origanal look.

• Can someone clarify the paywall for social sharing threshold setting?

  When you set up your DPS account for social sharing Adobe documentation notes that "The Paywall Threshold value determines how many items you want a user to be able to read it before you hit them with the paywall message."

  Programmatically how defined an article?  Is it the same as a horizontal scan the next page or the following table of contents entry?  I run some tests and I put our account number 3 and when I discovered these shared pages I can navigate clearly beyond 3 pages horizontally.  In fact the only way for me to reach the paywall is click on an item in the table of contents that are protected.  Can someone clarify the situation?

  Are a free portfolio articles? The paywall does not apply to items of free folios.  With v22, the paywall affects only the articles in detail folios.

  Laxman

• Clarify the @Relative and @Parentval

  Hello

  I'm new on Essbase, it would be nice of someone to help me understand this script I see.

  I have the following plan:

  Outline: XXX

  Product

  A

  Pension1

  XX1

  condition2

  B

  Pension2

  YY1

  YY2

  Account

  X

  zeroOneFlag

  THERE

  Premium

  Company

  Alpha

  GEN ACCT

  Beta

  I've simplified the sketch for this discussion (there are other members for each of the account/products/company)

  Now, I see the following script:

  Difficulty ("Gen Acct",@relative("Pension1",0), @relative("Pension2",0) ")

  'Premium' = @Parentval (,"Premiumproduct" ") *" zeroOneFlag ";

  endfix

  Now, how to see what is happening?

  I have the following confusion:

  1 > I understand the @relative("Pension1",0) and @relative("Pension2",0) who will give me the coordinates that receive the update.

  2 > how did the accumulation happening with the command @Parentval (product,' "Premium').

  It would be nice of someone to clarify.  Thanks in advance.

  Post edited by: 2970032 (to give more details of the useful comments made by GlennS_3)

  Oops, Yes 1 Pension is the descendant of A, I guess I was typing my response too fast (trying to beat TimG

  Yes to calculate any member you're on it will pick up the value of the parent for the calculation. I'm guessing that your member of zeroOneFlag has #Missing a zero or a 1 in there to determine if the premium should really be applied.  So, it seems that in some cases you copy the premium from parents to children. I hope for only one child because if you run an aggregation he would give the parent a multiplication factor of the number of children you seeded with values.

• Clarify the Adsplice in environment OATM

  Hello
  
  Installation of a new product in E-Business Suite R12.1.3.
  Please clarify that before OATM we create a default tablespace & index tablespace for the new product.
  After OATM what exactly I have to do. Please clariy
  What I need to create new tablespace or use the existing APPS_TS_TX_DATA & APPS_TS_TX_IDX or when I run adsplice and cp newprods.txt, system will automatically assign these storage spaces
  Please provide details
  product = key
  # Spaces table it can be edited to fit the configuration of database
  main_tspace = CLED or APPS_TS_TX_DATA system automatically gives index_tspace = CLEX or APPS_TS_TX_IDX or system will automatically assign
  temp_tspace = TEMP
  default_tspace = CLED or APPS_TS_TX_DATA or system will automatically assign
  
  Please specify it is optional in OATM
  
  Thank you for your kind support.
  
  Alig
  
  Published by: user12257829 on April 30, 2011 23:27

  After OATM what exactly I have to do. Please clariy
  What I need to create new tablespace or use the existing APPS_TS_TX_DATA & APPS_TS_TX_IDX or when I run adsplice and cp newprods.txt, system will automatically assign these storage spaces

  OATM is already configured in R12, then use APPS_TS_TX_DATA & APPS_TS_TX_IDX for the new product.

  Please provide details
  product = key
  # Spaces table it can be edited to fit the configuration of database
  main_tspace = CLED or APPS_TS_TX_DATA system automatically gives index_tspace = CLEX or APPS_TS_TX_IDX or system will automatically assign
  temp_tspace = TEMP

  APPS_TS_TX_DATA

  default_tspace = CLED or APPS_TS_TX_DATA or system will automatically assign

  APPS_TS_TX_DATA

  Please specify it is optional in OATM

  It is not optional, and you must use the aforementioned storage spaces.

  Thank you
  Hussein

• Need help to clarify the concepts of PL/SQL

  Hi all...

  I write this kind of question because I have an exam on certification for PL/SQL... I am preparing for the same, but a few issues that I face are difficult for me...

  you create two triggers in database on two different tables. the two triggers performs exactly the same code. What can you do to modularize this feature?

  1. combine the two databases level trigger trigger a single statement.

  2. create a procedure with the code and change each database trigger to run the new procedure.

  3 handset the trigger two db in a single INSTEAD of trigger.

  4 - replace the trigger of the db with a deferred referential constraint.

  Please give a brief explanation also...

  Thanks in advance...

  What is the most difficult:

  2. create a procedure with the code and change each database trigger to run the new procedure.

  (1) you create a procedure

  create or replace myproc...

  Start

  ... Here is the my unique code

  end;

  (2) create a trigger myfirst...

  Start

  MyProc;

  end;

  (3) create a trigger mysecond...

  Start

  MyProc;

  end;

  mind that you cannot use DTL (commit, rollback) on the trigger.

• Can someone please clarify the SQL Interface guide

  Therefore, the guide Interface SQL said for Linux there must be a softlink in the ESSBASEPATH/bin/.odbc.ini user directory
  
  Let's say I created this link.
  
  Now to change data sources, I think we need to change the. odbc.ini file
  
  But the SQL interface guide says to edit the odbc.ini file.
  
  SO what is right? Should we be editing the. file odbc.ini or must create us a softlink to ESSBASEPATH/bin/odbc.ini instead of ESSBASEPATH/bin/.odbc.ini
  
  Please specify.

  You are on version 11.1? This might be the reason why you did not file .sh.

  I remember (2006) copy the same information from Merant ODBC.ini to. odbc.ini (can't remember now if I edited together)

  The SQL 6.5 interface guide Essbase wish edit. only odbc.ini file.

  So it is possible that it is a bug in the documentation (can not be safe here)

  Lets see if some else can comment on that.

  I'm sure it is. ODBC.ini requiring the change, because the symbolic link is created for that one.

  Concerning

  Celvin

  http://www.orahyplabs.com

  Please check the answers as useful/correct as appropriate

• Looking for ideas of navigation... clarify the terminology used in the project

  Hi people... looking for some ideas for my Captivate 5 projects navigation.

  I have a project which is executed automatically, which means it does not require the participant to click on previous/next buttons to proceed with the project. I display the standard navigation in skin buttons, however. I use also the voice-over to tell the whole project. On several slides I use specific terms or concepts that the participant may want to get more information on the... which I am more than willing to provide.

  What I would like to know many of you seasoned users of Captivate is how you would allow participants to get more information about a specific term / concept presented as underlined text in slide balls without interrupting the flow of the entire project. I thought to use click boxes that send them to another page (branching) and then provide them with a button that we continue them with the project from there. I also considered to use overview legends, too, but if they don't find the bearing before the slide advances, they miss the opportunity to ride on this point. I'm not a big fan of prompting the participant about the existence of the bearings,... I just use underlined text indicating a "hyperlink" so-to-speak.

  Anyone have some creative ways to this address?

  Hello

  Now, you will know that I prefer screenshots: you can easily duplicate a total script (see yellow highlighted button), perhaps it is better to change the default name of the script in double. ATTENTION: each object has the correct ID, in this case, it's the text caption (I've marked it ExplanationTC), so you will have to change.

  It is not possible (yet) for export/import of advanced actions

  In my last blog I tried a workaround using a model solution, maybe you saw?

  Please, this post is still profoundly marked also unanswered?

  Lilybiri

  

• MacBook runs very slowly, Rainbow pinwheel all the time

  A few weeks ago my Safari began to act and to quit almost immediately when I opened it, I so reset my laptop full and cleaned then reinstalled the latest OS X. It worked after that and I can open and use it, but now I started to do the rainbow reel almost everytime I try to do anything, even typing the reel has revealed about 30 times.

  In order to clarify the roulette is shown all the time even outside of Safari, when I click, I type, when I open applications, etc..

  Use the etrecheck to etrecheck.com and to see which are running on your Mac.

• Firefox for Android only displays the desktop version of gmail rather than mobile.

  Android only question.

  I prefer to access gmail via a browser rather than the gmail app. Tests of other browsers on Android (Chrome and Dolphin) I see that they display a mobile-specific version of the gmail Web site.

  Firefox for Android only displays the version of office on my Nexus 7 (5.1 runs Android 2012) - and therefore more difficult to read and use. Any help or ideas would be greatly appreciated.

  Thank you

  Pinellas Chuck

  Well, Yes, it's that Word annoying Tablet.

  What I'm going to describe is difficult to type, so I hope that you can open this page on your tablet.

  Select (0) and copy the following text on your Tablet if possible to avoid the excesses of type:

  general.useragent.override.mail.google.com Android; Tablet;#Android; Mobile;
  

  The forum linkifies this first part, but it is not supposed to be a link.

  (1) open a new tab to Subject: config (type about: config the Awesomebar and hit the arrow go or tap Enter).

  You can bookmark it for easy future access.

  (2) in the search box, type agen and make a pause while Firefox filter list

  (3) scroll down to the bottom and look for a preference named general.useragent.site_specific_overrides and confirm that it has its default value true. If it is set to false, press the reset button for it back to true.

  (4) scroll back up and press the big button "+" to the left of the search box to add a new parameter

  (A) the name of the preference must be general.useragent.override.google. com (for all Google sites) general.useragent.override.mail.google. com (for Gmail only)

  If you type this, beware of the correction automatic insertion of spaces and be sure to remove those.

  If paste, remove the part after that.

  (B) on the right side, type Boolean and in the popup, change it to a String

  (C) the value of the preference should be Android; Tablet; #Android; Mobile; -in other words, substituting Mobile for Tablet.

  If you type, pay attention to the excess spaces.

  If gluing, remove the preference name and extra space before this part.

  (D) then click on create

  If you open https://mail.google.com/ must now use the mobile layout.

  Success?

  Edit: To clarify the name of preference options.

• I can't use HTTPS from the 21.

  Since the 21, I was not able to use https with Firefox sites. Internet Explorer and Chrome work fine.

  I either need to have Firefox and start using IE or Chrome. It's very frustrating and I spent hours of troubleshooting. I give up at this point.

  I get...

  The connection has been reset. The connection to the server was reset while the page is loading.

  The site could be temporarily unavailable or too busy. Try again in a few
     moments.
   If you are unable to load any pages, check your computer's network
     connection.
   If your computer or network is protected by a firewall or proxy, make sure
     that Firefox is permitted to access the Web.
  

  I completely uninstalled Firefox and reinstalled clean. I disabled Spybot and Avast nothing helps. I have installed and uninstalled ZoneAlarm nothing helps.

  Other ideas would be welcome. I cannot and will not make an operating system clean installation just to clear up a browser problem.

  On another note... Windows Firewall is also disabled, but seems to be faulty after a Windows update several months back. I can find no mention of the issues related to it the Microsoft.

  Hello

  Looks like you have been troubleshooting a fair bit already so I ask you to go through the steps detailed here: Firefox cannot load websites but other browsers may (just posted for other users to come later).

  Did you check if the problem still appears in Mode safe?

  The problems of Firefox in Mode safe

  If the problem does not appear in safe mode then continue to follow the instructions to identify the add-on / setting that is causing the problem.

  If the problem still appears in Mode safe then I suggest to do a Reset of Firefox. This goes back to its default settings Firefox but will keep your history, bookmarks, etc..

  Firefox - modules to reset and refresh settings

  I hope this helps. Let me know if not.

  Comments added by a moderator in order to clarify the solution. ~ J99
  
  Owner of question Note Heeia's comment in a post here

  Thanks! User error on this end. I had checked everything I could think of and then by chance I remembered I had NetNanny on this computer. ....
  

• Please point out the features of the device in a request header

  Responsive Web Design http://bit.ly/f6TPB7 is an approach/technique/movement extremely important to make the mobile-friendly web. Given that web mobile traffic explodes and there were more smart phones sold in 2011 that PCs http://vrge.co/wqOiED that the importance of the movement cannot insist.

  We have some significant obstacles on the path to fully optimized Responsive Web Design, however. Sensitive images (small images for small screens optimize download times) and optimized CSS/JS (mobile devices do not need the same JS/CSS as desktop browsers do) are the most obvious.

  The best way to manage sensitive images and optimize CSS/JS would be on the side server. However, server-side has enough information on the features of the device, with the emergence of all sorts of cruft-y solutions for result (e.g. with)

  popular for tags etc.) that should not exist.

  However, browsers know a lot about the devices they are running on and could pass this information to servers as part of the initial application, which allows the servers to get smarter than what we have now.

  Something as simple as if Firefox passed along information of width/height of the unit within the framework of the initial request headers would go very very far, which can do a lot of smart decisions on the side Server (possibly allowing systems 'media-queries-like' on the side Server).

  Since some proxy servers break or disable the custom headers, probably the safest way to add this is to add the width/height of the user-agent header information.

  Mozilla is in no hurry to add a bunch of stuff for the request headers. There are sites like bostonglobe.com who make sensitive design without the need for these headers. Giving also the exact pixels may lead to the design of the site that breaks easily to other pixels width/height and densities. That being said that Firefox will be to clarify the General class of the device through the user agent. He calls clearly to being a mobile device < ~ 7 ", compressed ~ 7 '-~ 11 ' and office. That can be used to make generalizations about the size of the content that you want to send. There will be more info on the user agent string mobile Firefox 11 beta is released.

  [edit] This work has been planned for Firefox for Android v11 however proceed to time constraints, was released as part of 14 Firefox for phones. Shelf support will be added in a future version of Firefox.

• Satellite R630 - fan runs all the time

  Hello everyone,

  I have a Satellite R630, and I'm happy with it. But there is one thing that makes me angry... the fan! It runs ALL the time. I browse a little... the fan works. I work with the office, or something... the fan works. To clarify: the CPU is not used, there is no heavy processes running, and the Notebook\CPU is cool. There is no reason why the fan should work, all the laptops that I had before where calm in the same situations. Of course it is not a problem if it starts working if necessary (a game, looking for a HD video or something). But not without reason!

  Someone at - it a solution for this problem? A tool to fix the fan speed\intervals manually, or better: an update of the bios (in the version 1.4 and 1.5 I can choose what I want... the fan did not stop execution). It is also quiet in Linux or any other operating system.

  @Toshiba: (!) Please do something. The only solution for me right now is to return the laptop to the store. :-(

  Best regards
  Imk82

  Hello

  Hmm... If you have already installed the latest BIOS updates, you should check the cooling of Windows Power management settings. Generally you can switch between different methods of cooling as you can read here:

  [How to handle power management features | http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm]

• Location of the file music

  Hello, I've recently added a few albums in iTunes.  After you add the I noticed that iTunes them stored in a different location that all my my previous adds. (It has been a while since I added anything).  I'm curious to know why this happened, but I'm guessing that it was due to an update of the iTunes version.  I'm not happy that my music will now be in two different places.  Also the kind of weird is that some songs are available, while others are not, but when searching, iTunes finds songs that are stored in the previous location, but not others.  I would appreciate a suggestion on the best way to consolidate my music to a parent site without creating a mess.  Consolidation could clarify the research question too I guess.  Thank you.

  Original album: ~/Documents/Music/

  New location of the album: ~/Music/iTunes/iTunes Media/Music /.

  ~ Tim

  I think that the boards of Limnos in this link iTunes Consolidation: he creates duplicates of media files if they exist in the new folder of itunes already but are not referenced in the itunes library of?

  is no longer applicable to your operating system...  10.7

• How to upgrade poorly entered details in the warranty?

  Hello

  I recorded my new product an hour ago, and one of my information was wrong (the email address).
  1 is it essential?
  2. How can I update my contact information?

  Thank you
  or

  Nothing is critical and I think everything can be fixed. ;)

  You will find in this section guaranteed so many threads with the same or similar issues, and you can find the exact address where you can communicate with people of Toshiba and clarify the situation.

  In any case, try to contact Toshiba directly under [email protected] and explain the situation.
  As far as I know, you cannot change anything. After all the relevant information and data update request.