Similar Questions

• Ridge SVFA and the Relative Phase amplitude must be reentrant

  I think I found an obscure problem with one of the "Baseband FFT" s VI on the 'Frequency analysis' subpalette of the Sound and Vibration Measurement Suite. "

  The "Peak Amplitude and Relative Phase SVFA" is set to no reentrant run, but I think it must be defined on preallouee clone running reentrant.  All the other "Baseband FFT" Vi on the 'Analysis of the frequencies' subpalette are implemented reentrant preallouee clone.  This is crucial, because if you use multiple instances of the same VI on a block diagram and feed each instance of another set of entries of waveforms, each instance must maintain its own internal state FYI channel, sampling rate, on average, etc.

  I just found out the hard way after a lot of debugging this including VI has been implemented not reentrant.  On average maintained automatically delivered to zero with warning 1908.  Of course, I had two instances in my diagram, each receiver signals a different set of channels.  Because the VI is not reentrant, he was running an instance with a set of inputs of waveform, then execution of the other instance with a different waveform entries together, then in back and automatically reset on average to each time because the channels kept alternating.

  Don't I have that right?

  Jeremy,

  Looks like our test coverage can use some improvements. You're absolutely right - this VI was to have been put to preallouee clone environment. EI which was originally filed repsonded CAR # 570225 to our development team and it's been fixed for the next version of the software Sound and Vibration.

  Each new version, we write one articulates KnowledgeBase documenting these fixes, for example: the list of fixed bug in 2015.

  Keep an eye on fixed bug list for the next version and this CAR ID to appear in this topic.

• How to export a single job Disqualification as well as the related processes and data warehouses

  Hello

  I'm new to OEDQ. May be that it is a fundamental issue. But I am not able to find any way. Help, please.

  I use OEDQ version9 and installed locally in my system. I prepared a working with a CSV file as source and used some transformations of control (data type, control the length) in my process ( I've also enabled publish it on the dash for this process option) to prepare the work.

  Then I took the export of .dxi of employment by right-clicking on the name of the job and by selecting the package.

  But when I import this package dxi to another machine is not able to find the related processes and then I am unable to run the TASK.

  Now, is it possible in OEDQ where I can take export a JOB with connections and related processes?

  Kind regards

  Samira

  It is normally easier to pack the whole project, but for any object, you can filter a project first and then package it. To do this for a job, right-click on the task and select filter of dependence - elements used by the selected item. Then package the filtered project - this upward work package manager and all other dependencies (data banks, data interfaces - you won't have to 9.0), snapshots, data staging, refer to data, process etc..) The same works for other objects and processes.

  I would note that since three version major 9.0 so you are encouraged to use a newer version if possible.

• Relational table between the user and UD_ADUSER profile

  Hello

  I have a requirement where in I need to write a query to find out the difference between user profile for a particular user data and the form data from the same user AD process in Oracle Identity Manager 11g R2 (11.1.2.0)

  While the details of the user are stored in usr table, the table of process for AD shape is UD_ADUSER table. By comparing the two tables, I find the common attribute to be orc_key in UD_ADUSER and ORC table contains the usr_key and table orc_key / usr the usr_key.

  Is ORC table the proper relational table between usr and UD_ADUSER tables to link users between these two tables usr and UD_ADUSER?

  Please correct me if I'm wrong.

  -Thank you,

  def.

  You can use these two tables. I always spend Ouedraogo table between them because the OST has the status of a resource. You can query between them.

  -Kevin

• Entity and attribute transformation of names (case-sensitive) to the relational model

  Hello

  For the names of entities and attributes, I would use camel casing, e. g. AccessRightGroup (or the right access group) and its translation to the relational model in the Table name access_right_groups. I found, I can do in the entity properties > General > abbreviation preferred by writing the name of the table you want in this area. But I guess that there is a more elegant way by setting that breaks are transformed into small capital and underlined and entity (set) becomes plural as table. Is there such a possibility?

  How that would make the camel case attributes?

  Best regards, Robert

  Hi Robert,.

  case-sensitive, you must set 'Title case' as a separator for logic model in the design properties dialog box "settings > naming standards '-c' is for this form of the names AccessRightGroup; for group of access rights that you need not change anything - the default separator is set to 'space '.

  For the plural in the relational model, you need a glossary with defined plurals - however it only works for the entity name unique term. I logged an ER to change this.

  Tiny in a relational model - well you must set to relational model - in the Properties dialog box - "(Naming options > Table, cas de caractères...-mis à baisser et le nom sera mis dans cette affaire àle cours de la transformation) - otherwise you always can use the script provided with Data Modeler to convert the names of all the lower/upper cases."

  Phhilip

• Transformation to define the schema and user on Tables in relational and physical

  I imported my Designer SDDM 4.0.1.836 deposit.  Now, I want to APP_SYS of subviews allows to define the schema on the tables in the relational model and the user on the physical model.  Our application in designer systems are 90% based scheme.  Here's what I have so far based on the example of OE and HR plans that I imported, built logical, then back to relational.  At this point, I have the tables by subview...  Line 24 is obviously incorrect.  Can someone give me a step by step approach to understand what I need to set the schema of the table and the user?  I looked through the read me file, xml files, the index and searched the known universe and am still confused.

  importPackage(javax.swing);
  // variable to keep a status message for later
  
  var message="";
  var schema="";
  
  // Get all subviews for Relational
      subviews = model.getListOfSubviews().toArray();
  for (var isub = 0; isub<subviews.length;isub++){
      subview = subviews[isub];
      message = message + '\n'+isub+" "+ subviews[isub];
      if(subviews[isub]!=null){
            if(subview == "HR_ERD"){
               shema = "HR";
              }else if(subview == "OE_ERD"){
               schema = "OE";
              }
           tables = model.getTableSet().toArray();
           for (var t = 0; t<tables.length;t++){
               table = tables[t];
               //check for presentation in subview
               tv = table.getFirstViewForDPV(subviews[isub]);
               if(tv!=null){
                   table.setSchemaObject(schema);  
                    message = message + '\n    '+ t +" " +shema+"."+ tables[t] ;
              }
          }
      }
  }  
  
  JOptionPane.showMessageDialog(null, message);
  //Packages.oracle.dbtools.crest.swingui.ApplicationView.log(message);
  

  Hi Marcus,

  First of all, you must make sure that the schema already exists in your relational model.

  You can use the method

  public void setSchema (String schemaName)

  to associate your Table with this scheme.

  (This method is defined on ObjetConteneur, so it can also be used to make and index).

  If you already have a user of your physical model that implements your schema, it is not normally necessary to create a user on the TableProxyOracle in the physical model.

  However if you do not want to set, then the method to use is

  public void setUser (user UserOracle)

  David

• CS4 on Windows 10 seems to be broken... at least I can't clone. Before that, Silver FX and the related add ons did not work. I would like to remove and re-install Photoshop CS4 on Windows 10, but I'm afraid that none of these upgrade CD I will work t...

  CS4 on Windows 10 seems to be broken... at least I can't clone. Before that, Silver FX and the related add ons did not work. I would like to remove and re-install Photoshop CS4 on Windows 10, but I'm afraid that none of these upgrade CD I will work... they are all dependent on a previous installation. If I remove photoshop and try to use the CS4 install disc I have, it fails? Will I need to re - install Photoshop 5.5 and each single update since then go to CS4?

  You need not install older versions in order to get the last update enabled.  During the CS4 activation process, you can specify the eligible previous version (choose the oldest among a list, then enter its serial number).  Choose any one you had just before CS4.

• Can I hire the CC Adobe as a person and use it in a business without generating any legal problems for the company? I'm in the Brazil and the Adobe Web site, that I have not found that everything related to the legislation, they apply in this country on t

  Can I hire the CC Adobe as a person and use it in a business without generating any legal problems for the company? I'm in the Brazil and the Adobe Web site, that I have not found that everything related to the legislation, they apply in this country on this issue.

  single user licenses allow you to use the adobe corporate programs and allow to sell the products that you create using adobe programs.

• Why the relative values of RGB and CMYK will not change when switching between Photoshop and InDesign?

  I'm trying to put together a Guide to color for my company's brand guidelines.

  Initially, I worked for InDesign and copied all H, RGB and CMYK values that I had when I went in an eye my original color palette.

  However when I put the same values of RGB in Photoshop I gives me a (somewhat) a different set of CMYK numbers than I had initially documented in InDesign.

  Why is this?

  JamieCurtis5 wrote:

  It makes me feel a bit nervous leaving aside CMYK all together...

  CMYK is essential for a company's brand guide. The printer ask again, it's a simple and direct question. If they cannot answer this fundamental question, that speaks well of their professional standards. It is a common practice and highly standard procedure. I do it all the time (and get answers directly in the world).

  That said, if this guide in general and not necessarily related to this particular printer, it might be preferable, specify a profile which is commonly used as a general practitioner in your area. It depends on where you are. Here in Europe, it would be either Coated FOGRA39, ISO Coated v2 300% (eci).

  In the United States, I guess us Web Coated (SWOP) v2 would be on a list, not because it's necessarily just for the purpose, but simply done to be the default Photoshop. Printers must get loads of the present. Same here in Europe, where this profile is never used any where, a lot of people use it just because it is the default value of the PS and it never gets turned into something more appropriate.

• Can I bring PORTAL30 user and the related PORTAL tablespace after R12.1.1?

  Hello
  
  After the 11.5.9 to R12.1.1 upgrade, I bring PORTAL30 user and the related PORTAL tablespace? We do not have the old Portal stuff and won't use portal in the new system. In my view, there are objects 1145 (656 Index, 431 tables, lob 28 index, two tables nested in the tablespace and lob 28 segment), but almost no data.
  
  Thank you
  Sinan

  After the 11.5.9 to R12.1.1 upgrade, I bring PORTAL30 user and the related PORTAL tablespace? We do not have the old Portal stuff and won't use portal in the new system. In my view, there are objects 1145 (656 Index, 431 tables, lob 28 index, two tables nested in the tablespace and lob 28 segment), but almost no data.

  Please see these documents.

  What is the Impact of a seeded Oracle users disabling? [418767.1 ID]
  Configuration Guide for Oracle E-Business Suite Release 12 [403537.1 ID]
  How to remove Oracle Portal 3.0.9 to E-Business Suite 11i [ID 312349.1]

  Thank you
  Hussein

• Financial information and the related issue of content

  We want to launch a URL when a user clicks on a cell with a related content. However, we want to transmit to the members of the dimension of this cell (row, column, page, and POV) to the URL as a parameter.
  
  I can see when I implemented the related content between two reports she spends the dimensions, but it looks like it is in some kind of coded token.
  
  Someone at - he found a way to pass data of dimension as a parameter as described above (to a URL custom without encryption, etc.)?
  
  Thank you!
  -Jake

  Hey Jake,

  I think that if you create a custom link and put in something like $ http://localhost? $CONTEXT
  When you click on the link it will convert $CONTEXT$ in analytical information for example http://localhost/?attribute=Product.id.100&attribute=Year.id.FY09

  Is that what you are looking for?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Slow down the Audio and keep beat related Sections

  Hello people,

  I have a song that I would like to remix and I all set beat matching.  When I go to slow down the audio I lose my bearings.  Is there anyway that I can keep the sections that I beat matched and slow down the audio so these sections remain?

  For example, that the song is 120bpm and I have this rhythm corresponded perfectly.  If I have a loop of 4 bars and slow down the audio I have more 4 perfect bars.  I want to be able to slow down the audio and still have my bars 4 faultless.

  I hope that makes sense.

  Logic Pro X: using Varispeed to change speed

• I keep trying to run 2 updates that will not update. I get the error 646 with them. they are related to the KB976884 and KB976416. they are for Outlook and the pathfinder 2007. I'm not sure but I think they are for microsoft office 2007.

  Sorry if I'm repeating myself, but just trying to meet what is needed.  The only thing I have changed or done on my computer is run the defragmentation and tried to update each update separately but I am unable to get the updates for the update for Microsoft Office InfoPath 2007 (KB976416)

  Download size: 2.1 MB

  This update provides the latest fixes to Microsoft Office InfoPath 2007. Additionally, this update contains stability and performance improvements.

  More information:
  http://support.Microsoft.com/kb/976416

  and I am unable to get this update also: update for the junk e-mail in Microsoft Office Outlook 2007 (KB976884) filter

  Download size: 3.2 MB

  Update type: Important

  This update provides the filter of junk e-mail in Microsoft Office Outlook 2007 a more current definition of which e-mail messages should be considered junk e-mail.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Amazon Server related and how to post video Code of nodejs component on the landing page?

  Hello

  I want to organize my component and php files on an amazon Ec2 server instance then I'll have to install Apache and NODEJS times in the Amazon Ec2 Server Instance?

  
  

  my components are developed in nodejs. configuration page is in PHP.

  
  

  How do I post HTML and video embed code of my component to the landing page?

  My components are developed in PHP and NODEJS.

  
  

  Thank you
  

  All the information you need can be found here http://topliners.eloqua.com/community/code_it/blog/2012/01/24/building-cloud-components-the-provider and here on The Eloqua Platform - building A Resource Guide in the section components of cloud.

• Unable to locate multimedia related and the Uploader with presenter

  Someone sent me a ppt I needed to publish using Presenter to Connect.  I published it but embedded videos has failed.  When I went to the ppt and tried to view the videos I got a message saying Powerpoint did not find the linked multimedia file and lists the file name.  I guess that this happens because the original video files are on the person who created the computer this ppt and not mine.  Is there a way to fix this or a way to download the original videos for the presenter published TPP will play videos?  The creator of ppt sent me a zip file with all the original videos but tere were about 30 short films and .gif so I try to avoid placing all the videos in the ppt.  Any ideas or suggestions?

  Thank you

  Marcus

  Hi Marcus,

  Use the Package feature to share the ppt/pptx file. Please follow the steps below and you will be able to publish to connect successfully.

  Steps to follow:

  1. open a ppt/PPtx file.

  2. go in the Adobe Presenter tab.

  3. click on the package. A file will be created. This file will contain the ppt/pptx file with all the resources.

  4. now share this file to another person or using e-mail or network sharing.

  5. open this file now by double clicking on the new system.

  6. now publish to connect. You will be able to publish it on connect successfully.

  I hope that it will work. If you are facing any issue. Please let us know and we will help you realize your task.

  Thank you

  Sunil

  Adobe Presenter Engg team