Clarity on the Trunking Modes

Similar Questions

• Cisco SGE2010P LAG in access or trunk mode?

  Hello.

  I have a client who has two SGE2010P connected by four LAG ports.

  Switch has all the users, and B a whole server. All used on the vlan 1.

  Now I had to add the point with multiple SSID access.

  Here the port I created trunk port since the AP had to pass several tag/no identified images.

  So now the two trunk vlan is spent. One is the vlan 1 and other native vlan 2 for the wireless of comments.

  If I were to set up access to this port, the AP Gets the ip address of the DHCP server on the other switch.

  When I set up the trunk, the gi0.1, which is part of the vlan native Gets the ip address.

  However, the Gi0.2 interface, which is part of the vlan 2 does not get an ip address.

  When I put the port vlan 2 access mode and got the AP to be in this vlan.

  I was able to get the ip address on the scope of vlan2. It's only when I set up the trunk port.

  the vlan 2 (not native vlan) does not get an ip address.

  So I think it is, maybe the LAG port is in access mode in the vlan 1 and not in trunk mode.

  Is it possible to change the port of OFFSET to be in trunk mode?

  Thank you in advance.

  Hi Thomas, that there should be "M1" in the list of the interface down. Or some channel port that you assigned. As an OFFSET, these ports are more specific. It works exactly the same in a catalyst environment, difference is, it's on a GUI config vs a CLI config.

  -Tom
  Please mark replied messages useful

• Sierra crash when after the "sleep mode"

  My MacBook Pro (13-inch, mid 2012) after update of the sierra accident when, after the "sleep mode".

  I try to reset the SMC sama NVRAM but always crash.

  suggest to solve?

  Thank you

  When you say 'crash', what do you mean?

  Probably something that runs in the background. Open the black Apple at the top left. Select system, then users and groups and login items Preferences. All deleted in this window.

  You can add applications and programs back to the points of connection with a window to see what is the origin of the crash.

  You can also start the computer start-up (hold down the SHIFT key when you start) which will make the computer start with no 3rd party apps. If that solves the problems, just disable the third-party applications and add back one by one until the problem occurs again.

• How can I exit the recovery mode when I updated to iOS 10? !!!

  How can I exit the recovery mode when I updated to iOS10?

  Connect the device to your computer and use iTunes to reapply the update.  It worked with my Pro iPad after I first tried to live update. He went into recovery mode, so I had to download the update in iTunes and updated (new), but he returned right after that.

• How to disable the DT mode? #hard

  Hey community,.

  I have a big problem with my iPhone 5 c. I turned on the DT mode - update my IPhone, but there was an error message that says that there is an error in updating the phone. -[18]

  After canceling the entire session, I tried to disable the DT mode. But it will fail! So I am located in a trap or a circle of death, my telephone remains in this mode. I also tried different combinations of keys, but this also fails.

  Is anyone able to help me?

  Connect your device to your computer and open iTunes.

  When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.

  Keep now until see you the recovery mode screen and wait that he eat.

  You may need to do the above, more than once as recovery mode is difficult to enter.

  Restore first as New and test. Then restore backup if you wish. If the backup is corrupt it will probably bring back the question.

  https://support.Apple.com/en-us/HT201263

• End of 2015 iMac 27 inches 5K screen lights up when the "sleep mode"

  When the iMac is in "standby", sometimes the display lights for a while and then turns back off the coast. Screen does not completely, simply turn the backlight (it's like when you see a black image with the high brightness level).

  I know the iMac turns once in while when the "sleep mode" to access the internet and such things, but I don't like the screen turn on like that.

  Is there a question?

  Thank you for your collaboration.

  Probably not a problem, but to be sure that you can post a report EtreCheckon your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• How can I disable the Security Mode to allow me to watch Youtube videos.

  Hello!
  I use MSN 8.1 on a newish HP Pavilion 21.
  YouTube recently began telling me that it can not display until I got disabling the Security Mode.
  It seems to work correctly in the past. Do not know what is happening.
  Thank you
  LP.

  This is a feature of YouTube.
  See this - https://support.google.com/youtube/answer/174084?hl=en

  "Security mode is an opt-in setting that helps to filter potentially inappropriate content that you may prefer not to see or don't want to other people in your family fall on all taking advantage of YouTube." You can think of this as a parameter of parental controls for YouTube. »

• the iPhone camera App is not memorize the recording mode

  Hello

  I use the default photo from Apple on my iPhone App, especially because I can shoot while the iPhone is locked. No other applications can do that, not even using the Notification Center (other applications for registration as Strava can do it, but not to record video).

  However, I noticed that most of the time (but), mode (video, panorama, photo,...) is not like it was before.

  I turn almost only videos (idling, when outdoors). Whenever I start the camera application, either in the "sweep upward" screen (locked phone), or from the home screen in unlocking the phone, the camera always (or almost) default is still Photo. I have not found a way to default to the video.

  When you have to take action, it is very annoying to have to fumble with the buttons until you can actually draw. Not to mention that the app is so slow that initialize in the meantime, you cannot drag on the video mode (until the camera is completely initialized); then you drag too and the video mode Miss... it's a mess...

  However, sometimes, apparently when you start the camera after making a video, the unit starts in video mode... but you expect it to start in photo mode, you can already drag by anticipation and video mode Miss yet :-)

  The behavior is not very consistent.

  Unless there is something that the camera behave correctly, I think apple should seriously improve at least 3 things in the camera application:

  (1) in previous versions of iOS, the initialization of the camera was not otherwise slow. How about you do it as fast as it was before?

  (2) pass from still photo to video, then to move slow takes too long. The control must be more effective and faster. You should have a faster and more direct access to the different modes of recoding. How about a configurable "by scanning screen?

  (3) the camera app to set the frequency of default images for videos. What about settings for the default recording mode? (video, panoramic)

  Hi there redtomato,

  I understand that the camera on your iPhone app will automatically in video mode you want. If I always had to take videos, I think it would be very convenient to open the camera in video mode application every time I opened it.

  I tried what you said on my end, opening the camera my screen lock and video mode change application then blocking of my iPhone, and then repeat the same steps. Surprisingly, when I conducted my test of the camera to video mode application.

  I'm quite uncertain that if if it is a small problem with iOS, or if it was something that apple designed specifically, or maybe I'm just having chance repeating the steps you mentioned. To help troubleshoot your device, I recommend you to make sure that you use the latest version of iOS if your device is up to date. Once you have done this, try to restart your iOS device and see if you're still having problems.

  On reflection, maybe you can force the camera app to quit smoking? If this is the case, this could explain why you may need to manually change the camera in video mode application each time.

  I think your suggestions are great ideas, and if you want too, you can submit your ideas to Apple directly here: http://www.apple.com/feedback/.

  I love my iPhone and I like the camera on it and especially photography, so I can understand how you feel about the inconvenience, but I really hope the information I've provided help it it, otherwise, if all goes well it will be or is somehow.

  Continue to take great videos!

• Whence the fullscreen mode option is saved?

  I develop program, what are the uses WINAPI do start the IME mode by mozilla firefox. I have seen that when you press the F11 (full SCREEN MODE) it is still on mode full screen after restart mozilla. So whence the option / mode information full screen are saved?

  In the file localstore, rdf , in the profile folder.

• in Firefox can not see the window of downloads, specialist of the jump in the trunk to be saw - the speed downloaded a lot and now can not see how to fix it?

  in Firefox can not see the downloads window, specialist of the jump in the trunk to see - the download speed
  Downloaded a lot and now can not see how to fix it?

  The download Panel has been moved to the upper right corner with a circle arrow down. You can also visit on: downloads of your browser to visit all your downloads.

• Firefox is faster on the safe mode. Even when I disable all extensions and plug-ins, it does still work on normal mode. What should I do?

  I already tried to uninstall e install again, but rest the problema. When I use safe mode, firefox works correctly. I tried to remove all extensions and plug-ins, but the problem persists. Even my mouse pointer moves slowly around firefox screen when the normal mode. I have synced with another computer and I have no problem with each other.

  Hello lgm11, try turning off hardware acceleration and check again (in safe mode hardware, acceleration is disable).

  Thank you

• Help! iPad 2 keeps coming out of the recovery mode. I have the latest version of itunes and updated my drivers.

  Help! iPad 2 keeps coming out of the recovery mode. I have the latest version of itunes and updated my drivers.

  Please take a genius appointment at an Apple Store, or select another authorized service provider.

• Change the video recording in the camera mode?

  Just bought an iPad 9.7 inch Pro. I can't believe that they did not provide a way to switch between video and recording slo - mo resolutions and cadences of the camera app. I can go slipping between video and Slo - Mo and the amount of time, but I can't switch between shooting 4K and 1080 p video, or between 30 FPS and 60 fps 1080 p or slo - mo 1080 p 120 fps and 720 p 240 frames per second. In fact, I have to jump out of settings > Photos & camera to change DEFAULT record for these features of the camera modes? Please tell me I'm missing something.

  We are all of the users like you

  Please send your comments if you wish to http://www.apple.com/feedback

• When the privacy mode is enabled, each its own separate tab is? A sneaky cookie created in a tab will be seen by another tab? Tracking cookie of some item hidden on one page can be seen on another website, if its open in another tab?

  Is a tab as a separate instance of the VM when privacy mode is enabled? Independent 3rd party cookies goes out. (They are). This type of behaviour can be turned on?

  In private browsing mode all cookies settings are the same as in normal mode, so all open tabs and windows share the same set of cookies.
  
  The only difference is that you do not have access to cookies created in normal mode (you get a new set) and the session mode PB cookies are never saved on disk and are deleted when the end of this session of PB.

  There are extensions that allow obtaining a whole independent cookies, drank, I don't know how they work in mode of PB.

  • Multifox: http://br.mozdev.org/multifox/

• Cannot delete the airplane mode

  Even when I turn off airplane Mode on my phone, it remains on my watch. Mirror of my iphone is not really

  work, or turn it off manually. This is crucial, so any help will be greatly appreciated. Thank you, HAP

  w

  Hi Peter

  It is possible to put the flight to be mirrored between the devices, but the same does not apply to get off airplane Mode, that needs to be done separately on each.

  To change the setting for mirroring of the turn on airplane mode:

  -On your iPhone, in the application of Eve, go to: Watch My > General > airplane Mode - enable or disable the iPhone, to choose mirror.

  When the watch is in Airplane Mode, Bluetooth and Wi - Fi turned off, so there is no way for it to receive additional instructions from your iPhone (including a statement to exit the airplane Mode when the mode on your iPhone).

  To turn off the airplane on your watch Mode:

  -When you view the time on your watch, drag to the top of the lower edge of the watch face > drag left/right to the gaze of settings > press airplane Mode to turn off the mode > slide down on the screen to exit the looks.