class accelerometerSensor does not

Similar Questions

• Custom class event does not reach Application?

  Hey everybody,

  It is probably a pretty easy question, but it left me speechless. I can handle the events of user interface components in the Application. I can handle the events of a custom user interface, within its own class object. But the dispatched event of a custom, object of the user interface does not seem to reach the Application. The event is expected to reach Application? Event if an object should be managed within the class of this object, how can I control my program flow?

  Thank you!

  I saw only he made in the settings where they inject an event dispatcher.  If you don't want to use a frame, you could have a singleton (vomits in the throat) and pass a UIComponent.  Now remember you this UIComponent must be fixed on the display as list

  var vbox:Group = new Group();

  vbox.dispatchEvent ("myEvent")

  still will not be heard by the rest of the application.  You would have to wait for a user interface component to add pass THEN to your singleton for use in the rest of the application.  Honestly, I didn't think too much about.

• Class Timer does not work

  I needed a periodic showStatus funcation and read the setInterval docs where he suggests to use the Timer class instead.

  I gave it a try, it won't work. However, setInterval works

  Compiled with flex sdk "Version 3.3.0 build 4852.

  The player comments send me to http://www.Adobe.com/software/Flash/about/ which indicates that "you have the version installed in 10,0,32,18"

  Here is the code with setInterval enabeld (works) just comment this line and uncomment the section that uses a top clock to test the other case.

  package
  {
  import flash.display.Sprite;
  import flash.text.TextField;
  import flash.utils.setInterval;
  import flash.utils.Timer;
  import flash.events.TimerEvent;
  import flash.events.Event;

  SerializableAttribute public class Main extends Sprite
  {
  private var statusLine:TextField;
  private var statusText:String = "";
  private var statusTimer:Timer;
  private var timerStep:Number = 100;
  private var elapsedTime:Number = 0;

  public void Main()
  {
  statusLine = new TextField();
  statusLine.width = 400;
  statusLine.height = 400;
  statusLine.multiline = true;
  statusLine.wordWrap = true;
  statusLine.text = "start";
  addChild (statusLine);

  NOTE: Adobe livedocs for setInterval says:
  "Instead of using the setInterval() method, consider creating
  a Timer object, with the specified interval... »
  statusTimer = new Timer(timerStep,0);
  statusTimer.addEventListener ("timer", showStatus); A single sample it shows this way
  statusTimer.addEventListener (TimerEvent.TIMER, showStatus); The other sample reads
  statusTimer.start ();

  except that it does not work! stick with setInterval() for now
  setInterval (showStatus, timerStep);
  }

  private void showStatus (): void
  {
  var txt:String = "";

  elapsedTime += timerStep;

  txt += ">" + Math.round(elapsedTime/100)/10 + "."; "

  statusLine.text = txt;
  }
  }
  }

  Hello

  Once again, check the following Code. his work

  package {}

  import flash.display.Sprite;

  import flash.events.TimerEvent;

  import flash.text.TextField;

  import flash.utils.Timer;

  SerializableAttribute public class TestTimer extends Sprite

  {

  private var statusLine:TextField;

  private var statusText:String = "";

  private var statusTimer:Timer;

  private var timerStep:Number = 100;

  private var elapsedTime:Number = 0;

  private var count: int = 0;

  public void TestTimer()

  {

  statusLine = new TextField();

  statusLine.width = 400;

  statusLine.height = 400;

  statusLine.multiline = true;

  statusLine.wordWrap = true;

  statusLine.text = "start";

  addChild (statusLine);

  statusTimer = new Timer (100);

  statusTimer.addEventListener (TimerEvent.TIMER, fireTimer);

  statusTimer.start ();

  }

  private void fireTimer(event:TimerEvent):void

  {

  statusLine.text = "timer"+ counter fired;

  counter ++;

  }

  }

  }

• Class MovieClipLoader does not allow function calls

  I have functions within a movieClip that loads into a main movie. The functions work without problem when you use the loadMovie method, but I need to run a script after loading so I went to the movieClipLoader class instead.
  
  Problem is, once again the movieClip is loaded, any function calls from a key frame (or even a button) are totally ignored.
  What Miss me. Should I do anything different?
  
  Here's my code for movieClipLoader:
  

  In fact, I think I found the solution after looking at a few other posts. I changed "onLoadComplete" to "onLoadInit" and it worked.

  I found in another post, onLoadComplete does not mean that all code is still loaded, but onLoadInit means the film and the code is loaded.

• Class SystemConstraint does not work

  Hi all,
  
  I am trying to apply this constraint to my network "uNet". In particular, I want to calculate the shortestPath avoid a node. I took the code Java from the "Pro Oracle Spatial for Oracle Database 11 g" manual, Listing 10-28. With other Java code on the manual I have no problems, instead does not have this list 10-28.
  
  The problem is after the shortestPath() method. It is said to me:
  java.lang.NullPointerExcepion to calcolopercorso. Main.main
  
  So, I think that the path of the object is not created. I think that a problem can be that the method of shortestPath() want a NetworkConstrainttype, instead the manual pass myConstraint variable which is of type SystemConstraint.
  Is possible that it is a bug in the code?
  
  What do you think about this? The code is the following:
  
  Listing 10-28. Using the SystemConstraint class
  
  Set up a constraint system with a list of nodes to avoid and a cost limit
  int [] avoidNodes = {36119}; To avoid nodes
  SystemConstraint myConstraint = new SystemConstraint (uNet, avoidNodes);
  myConstraint.setMaxCost (1000);
  
  Get the shortest path between N4 and N3 in view of the constraint
  Path = NetworkManager.shortestPath (uNet, 378793, 621331, myConstraint );
  
  Here the problem
  
  See the path cost and number of links
  System.out.println ("path cost:" + path.getCost ());
  System.out.println ("number of links:"+ path.getNoOfLinks () ");
  System.out.println ("Simple path?" + path.isSimple ());
  
  Show the covered bonds
  System.out.println ("' driven links:" ");
  Link [] linkArray = path.getLinkArray ();
  for (int i = 0; i < linkArray.length; i ++)
  System.out.println ("link" + linkArray. getID() ")
  + "\t" + linkArray [i] .getName () + "\t"+ linkArray [i] .getCost ());
  
  See traveled nodes
  System.out.println ("' crossed nodes:");
  Node [] nodeArray = path.getNodeArray ();
  for (int i = 0; i < nodeArray.length; i ++)
  System.out.println ("node"+ nodeArray [i] .getID () + "\t")
  + nodeArray [i]. GetName() + "\t"+ nodeArray [i] .getCost ());
  
  
  Thanks to all in advance.

  You can try to set the maximum cost for a much large number (100,000) and see if he can find the shortest path with the node you want to avoid.
  I'm not sure about your network connectivity. Is fully connected and with many paths between a start and an end node in general?
  Is it possible to print your SystemConstraint?
  What is the path cost you one without coercion?
  You can also try another intermediate node to avoid and see if it works.

  Jack

• Virtual class module does not

  I'm having issues where my virtual classroom modules do not work. Whenever I have create and preview then she (or a view of one module published) I get the following error message:

  Virtual class module

  No details of the session have been updated.

  When creating I added everything that was needed. Anyone else experience this problem or have any suggestions on what could happen?

  Thank you

  Ash

  Hey Ash,

  Once learners visit the classroom virtual and complete training then the Admin should mark the presence and save it. Once the attendance is recorded the module will be completed and the learner can move to the next module. To mark the presence go to Admin > courses > choose the course > attendance > select the learner and click on save at the top right. Once it is registered, the module will be marked as completed.

  Note: Even applies to the class Module.

  Kind regards

  MILIN

• my root of classes hikeu does not work, the incorrect registry keys

  hikey classes root/comfile/shell/open/order

  Hi tbbt,.

  What you trying to do? How do you know if it is corrupted?

  To better understand the issue, please provide details about the problem you are having, we will try to help you solve the problem.

  Important: If you try to change the registry, it is recommended to save it upward. Serious problems can occur if you modify the registry incorrectly.

  You can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Class Keyboard does not not with CS4 AS3?

  I start using Action Script in flash cs4 and discovered that whenever I try to use the keyboard class, for example Keyboard.DOWN I always get "1120: access of undefined property keyboard."

  Sorry if this has been answered before, but I can't seem to find a similar question. Here is a very simple AS3 trying to play with the keyboard, I created. Please do help me

  package {}

  import flash.display. *;

  import flash.events. *;

  SerializableAttribute public class Main extends MovieClip {}

  public void Main() {}

  stage.addEventListener (KeyboardEvent.KEY_DOWN, movements);

  function of the movements (event: KeyboardEvent) {}

  if(Event.keycode == Keyboard.Left);

  trace ("Success");

  }

  }

  }

  }

  you forgot to import it:

  import flash.ui.Keyboard;

• addChild to a class declaration does not.

  I can run this exact same script on the timeline without the syntax of the class. This works. I put it in a class declaration, and he died. What gives? What Miss me?

  You can use:

• MicroSD does not work with Satellite click 10 LX0W

  Hi all

  I recently acquired a Satellite phone click on 10 LX0W Toshiba.
  The card says it's compatible with micro SD with UHS - I (maximum size: 128 GB)
  According to the SD Association, the Mode Bus UHS - I is compatible with the classes of speed UHS 1 and 3 (http://www.sdcard.org/consumers/speed/)
  However, the card, I bought (Kingston 64 GB, micro SD XC I, UHS speed class 3) does not work properly in this laptop but it works perfectly in other devices.
  The card is recognized by the Satellite click 10 but reading or writing is extremely slow and often give error messages. I can't even format it using this laptop.
  I think that there is something wrong with the Toshiba laptop, but can you give me your opinion please?

  Thank you!
  Kind regards

  Same thing here

  Toshiba click 10 with 10 windows, micro SD card 64 GB Kingston Class10 (UHS-1) does not work. Card is detected allright - can be seen in the Storage Manager, but cannot format it. If I format in some other device, Toshiba click 10 cannot use he - he can't write will destroy ntfs/exFAT FS on the map. The event viewer is full of SD card related errors.

  Any suggestion here, please?

  Pilot of 2006 (on windows 10) but cannot find anywhere ever.

• Created by af:table program does not properly

  I have this JSF page:

  <?xml version='1.0' encoding='UTF-8'?>
  <!DOCTYPE html>
  <f:view xmlns:f="http://java.sun.com/jsf/core" 
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
      <af:document title="myFirstPage.jsf" id="d1">
      <af:form id="f1">
            <af:table binding="#{createAdfComponents.table}"/>
       </af:form>
      </af:document>
  </f:view>
  
  

  Here's the bean "createAdfComponents":

  @ManagedBean(name = "createAdfComponents")
  @SessionScoped
  public class CreateAdfComponents {
      public String[] columns = new String[]{"customerID", "firstName", "lastName", "address", "dob"};
     
  
      private RichTable richTable = null;
      public RichTable getTable() {
          return richTable==null ? richTable=createTable() : richTable;
      }
  
      private RichTable createTable() {
          RichTable table = new RichTable();
          List<Customer> data = getCustomerList();        
          table.setValue(data);
          table.setVar("c");
          table.setRowBandingInterval(0);
          table.setId("t1");
          int i =1;
          for (String column : columns) {
              RichColumn richColumn = new RichColumn();
              richColumn.setSortable(false);
              richColumn.setHeaderText(column);
              richColumn.setId("c"+ i);
         
              RichOutputText columnValue = new RichOutputText();
              columnValue.setValueExpression("value", createValueExpression("#{c."+column+"}", getClassType(column)));
              columnValue.setId("ot" + i);
              richColumn.getChildren().add(columnValue);
             
              table.getChildren().add(richColumn);
              i++;
          }
          return table;        
      }
      private ValueExpression createValueExpression(String valueExpression, Class<?> valueType) {
          FacesContext facesContext = FacesContext.getCurrentInstance();
          return facesContext.getApplication().getExpressionFactory().createValueExpression(
                          facesContext.getELContext(), valueExpression, valueType);
      }
  
  }
  
  

  And, for completeness, here's the Customer.java class:

  public class Customer {
      private long customerID;
      public String firstName;
      public String lastName;
      public String address;
      public Date dob;
      public long getCustomerID() {
          return customerID;
      }
      public void setCustomerID(long customerID) {
          this.customerID = customerID;
      }
      public String getFirstName() {
          return firstName;
      }
      public void setFirstName(String firstName) {
          this.firstName = firstName;
      }
      public String getLastName() {
          return lastName;
      }
      public void setLastName(String lastName) {
          this.lastName = lastName;
      }
      public String getAddress() {
          return address;
      }
      public void setAddress(String address) {
          this.address = address;
      }
      public Date getDob() {
          return dob;
      }
      public void setDob(Date dob) {
          this.dob = dob;
      }
  }
  
  

  Now, when I run the above on IntegratedWebLogicServer JSF page in JDeveloper 12.2.1...  The columns in the table, but instead to display all the data, the page keeps refreshing repeatedly.

  And in doing so... I see the following exception in JDeveloper console output:

  javax.el.PropertyNotWritableException: //D:/JDeveloper/system12.2.1.0.42.151011.0031/o.j2ee/drs/Application1/ViewControllerWebApp.war/index3.jsf @8,59 binding="#{createAdfComponents.table}": The class 'CreateAdfComponents' does not have a writable property 'table'.
    at com.sun.faces.facelets.el.TagValueExpression.setValue(TagValueExpression.java:136)
    at javax.faces.component.UIComponent.processEvent(UIComponent.java:2419)
    at org.apache.myfaces.trinidad.component.UIXCollection.processEvent(UIXCollection.java:918)
  
  

  This exception keeps showing up over and over again... Presumable for every time the page refreshes, it does so constantly with little or no break.

  Now, when he has none of the elements of input text and only items of output text, so why would he try a set operation?  Not must not only be fulfilling get operations?

  PS I'm new JSF, and ADF.

  Many thanks to all.

  The error message tells you that your bean class holding the table needs a Set accessor method for the table. The Set accessor is called by the framework when the page was created.

  Add a setTable (RichTable t) viod your beans and it should display the table.

  As you initialize it the table the first time that call you the Get accessor, you need not store the table through the Set accessor.

  Timo

• Mozilla, your last update does not include the last cert of intermediaries of extended validation from Verisign, Symantec class 3 EV SSL CA - G2, please fix ASAP

  Your last update of firefox, Mozilla does not include the last cert of intermediaries of extended validation from Verisign, Symantec class 3 EV SSL CA - G2, please fix ASAP

  Firefox never includes the intermediate certificates.
  It is the responsibility of a server to include all the intermediate certificate required to make it possible to build a certificate chain that ends with a trusted root certificate embedded.

  Note that Firefox automatically records the intermediate certificates that servers send in certificates for future use Manager (they appear labelled as 'Software security device' in the References tab).
  If a server does not send a complete certificate chain then you get an untrusted error when Firefox has stored missing intermediate certificates to visit a server in the past that a send it, but you get an untrusted error if this intermediate certificate is not yet registered.

• 16 GB class 6 SDHC SD Card does not work with Camelio H20

  Can anyone help?

  I recently bought the camcorder above. I bought a 16 GB memory card class 6 SDHC separately.

  The map seems to work fine on my PC as a memory device.
  However, I can't work on the camcorder.
  I formatted the card on the PC and the camera but still does not work.

  I read that I might need to partition map. However, the user manual made no mention of this.
  The manual States that and SDHC card up to 32 GB can be used.

  I would appreciate any suggestions or comments!

  Thank you

  Kevin Bray

  Hello

  > I formatted the card on the PC and the camera but still does not work.
  If you have formatted it in camcorder, then the SD card has been recognized in camcorder is it normal?

  So what exactly do you mean by + I can't make it work on the camcorder? +

• Watch does not recognize the weight class as exercise-how can you add the duration of activity manually because none of the presets eg elliptical etc. is appropriate. Also does not count calories for example 35 when the rest of the group is around 500

  Look does not recognize the weight class as exercise-how can you add the duration of activity manually because none of the presets etc for example elliptical is appropriate and therefore do not count toward the daily goal. Also does not count calories for example 35 when the average of the others in the group is around 500.

  Hello

  When you use the application of the training session, choose the type of activity that best fits your business. For anything else - like weight - select the other category.

  During the follow-up of one year to the next helps:

  • Activity app will credit the ring of progress of exercise with one minute for every minute of the workout.
  • Active calories will be based on the data recorded by the heart rate sensor or a brisk walk, whichever is greater.

  Note, however, that the heart rate sensor is likely to give better results for the workouts that involve rhythmic (for example running) rather than the irregular movements.

  More information:

  Use of the workout on your Apple Watch - Apple Support

• Agilent 6812 B power cord does not work with the class IVI driver

  I try to use a power source Agilent 6812 B with class IVI DISARM on RS232 driver.  I have everything set up NI Max but I can't by the initialization routine.  I tried in LabView and LabWindows and nor will not work.

  I decided to follow the lines RS232 RX/TX and I see that he is sending the "* IDN?" command and it times out before receiving a response.  Unfortunately, it does not send the Terminal newline at the end of the string.  I can cross NI MAX and send "* IDN? \n' and he responds with the ID very well.

  So my question is, would be possible that the IVI specific driver is not written correctly to send a jump as an end of line character or do I need to configure the Compote to send this character separately?  The IVI driver has been downloaded from instrumement network driver of NOR and it says it is compatible with the 6812B, but has been tested with 6813B.