Classic bridge cannot BlackBerry Playbook a classic

Similar Questions

• BlackBerry smartphones cannot run unsign app on blackberry Playbook

  I develop Blackberry playbook app by using Flash Builder 4.5.

  When I updated new blackberry software update then cannot run the application on the blackberry playbook.

  Getting below error when I try to install flash Builder 4.5 for blackberry playbook app.

  Error:

  Deployment failed: send request to uninstall...
  Info: Action: uninstall
  Info: Uninstall testc2FuZGVlcC5kZWJ1ZyAgICA...
  Info: Processing 0 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 500 DnameMissingError

  Just encountered this problem as for me to clear the error, under the project - execution/debug settings properties. I chose the run configuration for the simulator which was giving me this error.

  Click on change, on the main tab, uncheck the box - clear data for application to each launch.

  Basically, I think that all 500 errors are cause by the compiler cannot find a previous run of the application, tend to get these errors a lot after the Simulator was just updated

• Network in the blackberry playbook Simulator error

  Hello

  I installed all the tools of development needed for the Blackberry playbook.

  I use Adobe Flash Builder 4 to develop applications.

  I installed playbook Simulator version 0.9.3 in Vmware player 3.1.2

  The browser in the Simulator can't load pages. Every time I try, I get a message

  Error:

  A network error has occurred

  Please try again later.

  I updated the network settings on the card in the reader of the VM NAT.

  Should I do all the network settings to browse web pages?

  Looking forward for your help.

  You are on a virtual private network? If so make sure you get off it.

  Are you on Windows or Mac?

  You can try instead of NAT network bridge and see if VMWare gets you an IP as your host computer, which should have access to the internet.

• Can I have separate keys of singing for BlackBerry PlayBook?

  Hi all

  I have Blackberry signature keys, but in an article that I heard that it is separate keys required for the Blackberry Playbook of signature development applications is it true?

  If not can I use same signature keys for this tablet also?

  in fact, I have a Playbook with me, that's why I ask you and I want to convert my Blackberry Playbook app android app please check below link for FYI.

  https://bdsc.webapps.BlackBerry.com/Android/BPAA/user-identification

  Kiran.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  I give glory for each answer

  HI Kiran_b,

  you are right that the application device playbook and BlackBerry have different signing keys.
  You cannot use blackberry sign button for Playbook.
  In fact in the blackberry device you must sign the playbook and .cod files you must sign the .bar file.

  --------------------------------------------------------------------
  Please mark as resolved messages if you found a solution.
  Feel free to press the Bravo thank the user who has helped you.

• Firefox only installs on a Blackberry Playbook tablet, Daniel?

  You just bought a Blackberry Playbook Tablet and Firefox do not install as a browser. You all another mfg listed, with the exception of the Blackberry, which took important boost product here in the Canada. I ' sure I'm not the only one using Firefox as browser favorite on our PC. Anyone who works on this issue

  https://wiki.Mozilla.org/mobile/platforms BlackBerry

    Due to the Java-based development system and inability to build C/C++ apps, the full Firefox browser will not be available on the Blackberry OS. However, a future version of Firefox Home may be available for Blackberry.
  

  as published by James in this thread - https://support.mozilla.com/en-US/questions/896047?s=Blackberry & r = 2 & as = s

• How do you get firefox on a blackberry playbook?

  looking to buy the blackberry playbook, but like most web site admin I ran in firefox that I want to run firefox on the playbook. Alternatively the blackberry browser support firefox web sites?

  Sorry, I don't know not what operating system that uses the Blackberry Playbook. Check out these suport pages:
  
  https://support.Mozilla.com/en-us/KB/will-Firefox-work-my-mobile-device#OS=Android & Browser = M5

  https://wiki.Mozilla.org/mobile/platforms

• BlackBerry playbook

  Anyone knows when are we going to get Skype for blackberry playbook?
  I'm sure that everyone who got a playbook are willing to pay for it if it's going to be the case! Skype developers can you please make the application for the playbook of bb.

  Hello

  If Skype for the playbook will be history as for all other BB models, you're in for a long wait!

  All BB users have requested, begging,... Since 2008-2009 to get Skype on the BB, but it's still not available and no word from Skype on the why, which leaves only when...

  Some purists will respond that it is available for customers of Verizon in the United States and 3 customers in the United Kingdom, drunk as everyone knows, is not what we want!

  So: good luck getting a response on the 'when' the question of Skype...

  Friend,

  LVL

• Blackberry playbook Tablet

  Blackberry playbook Tablet - I can't find it in the computer section or printer/devices. I can't open the Tablet, the light turns on but disappear in a few seconds.

  Hello

  Support options for your tablet (including the knowledge base, manuals and forums) are on this page

  http://us.BlackBerry.com/support/tablets/PlayBook/get-started.html

  Don

• ePrint apps for the blackberry and blackberry playbook torch

  Y at - it an eprint for blackberry and blackberry playbook torch application?

  Hello Dagreenguy,

  The only application for Blackberry from HP operating system is HP ePrint Service, found on the link below.

  http://appworld.BlackBerry.com/WebStore/content/13675?lang=en

  This app is mainly for printing on public printers, an example might be a FedEx Kinkos.

  If you want ePrint on your personal printer, I'd just sending an e-mail to the e-mail address of your printer from your Blackberry mobile ePrint.

• What version of android (up to which version of Android) supported by BlackBerry PlayBook?

  What version of android (up to which version of Android) supported by BlackBerry PlayBook?

  Designated operational entities 4.2.2 Android and Android 4.4 are supported?

  What is the version supported by BlackBerry Simulator.

  Thank you

  Your suggestion seems to be very good advice for me.

  OK I'll follow it.

  Thank you

• How to create the method own slot in QT for blackberry Playbook

  Hi all

  After two days of work-around, I can successfully develop the project of the QT in Qnx IDE for blackberry playbook 2.0.

  But now I have a problem to create the method of the slot to call on the click event of the specific button,

  Here is my code.

  #include

  #include
  #include
  #include
  #include

  slots machines
  void clickedSlots();

  int main (int argc, char * argv []) {}

  qputenv ("QT_QPA_FONTDIR", "/ usr/fonts/font_repository/monotype");
  QCoreApplication::addLibraryPath ("app/native/lib");
  QApplication app (argc, argv);

  QWidget window;
  Window.Resize(1024, 600);
  window.setWindowTitle (QString::fromUtf8 ('QPushbutton Background'));
  one click = new QPushButton ("Click Me");
  Click on-> setToolTip ("Thanks");
  Click on-> setMaximumHeight (100);
  Click on-> setGeometry (400, 100, 100, 40);
  QObject::connect (click, SIGNAL (clicked ()), & app, SLOT (clickedSlots ()));

  QPalette * palette1 = new QPalette();
  Palette1-> setColor (QPalette::Button, Qt::blue);
  Click on-> setPalette(*palette1);

  QPushButton * leave = new QPushButton ("Quit");
  QObject::connect (quit, SIGNAL (clicked ()), & app, SLOT (quit ()));

  QPalette * palette2 = new QPalette();
  Palette2-> setColor (QPalette::Background, Qt::green);
  Exit-> setPalette(*palette2);
  Exit-> setGeometry (200, 100, 100, 40);
  QVBoxLayout layout = new QVBoxLayout (& window);
  layout-> setGeometry (QRect (0, 0, 1024, 600));
  layout-> addWidget (click);
  layout-> addWidget (quit);

  Window.Show ();
  Return app.exec ();
  }

  void clickedSlots() {}
  QMessageBox msgBox.
  msgBox.setWindowTitle ("Hello");
  msgBox.setText ("You Clicked");
  msgBox.show ();
  msgBox.exec ();
  }

  Please help me with this problem. I had started to develop in QT before 2 days only. I'm not familiar with the development of QT.

  Thanks in advance.

  bskania.

  You have the chance, I'm feeling generous today.

  I fixed your code. You should really read the Qt documentation, it's fantastic. Here, it's a good start for the signals and Slots.

  http://Qt-project.org/doc/Qt-4.8/signalsandslots.html

  Mark this message as the solution and give me one as you please.

  main.cpp

  #include 
  
  #include 
  #include 
  #include 
  #include 
  #include "myslots.h"
  
  int main(int argc, char *argv[]) {
      qputenv("QT_QPA_FONTDIR", "/usr/fonts/font_repository/monotype");
      QCoreApplication::addLibraryPath("app/native/lib");
      QApplication app(argc, argv);
  
      QWidget window;
      window.resize(1024, 600);
      window.setWindowTitle(QString::fromUtf8("QPushbutton Background"));
      QPushButton *click = new QPushButton("Click Me");
      click->setToolTip("Thanks");
      click->setMaximumHeight(100);
      click->setGeometry(400, 100, 100, 40);
      myslots a;
      QObject::connect(click, SIGNAL(clicked()), &a, SLOT(clickedSlot()));
  
      QPalette* palette1 = new QPalette();
      palette1->setColor(QPalette::Button, Qt::blue);
      click->setPalette(*palette1);
  
      QPushButton *quit = new QPushButton("Quit");
      QObject::connect(quit, SIGNAL(clicked()), &app, SLOT(quit()));
  
      QPalette* palette2 = new QPalette();
      palette2->setColor(QPalette::Background, Qt::green);
      quit->setPalette(*palette2);
      quit->setGeometry(200, 100, 100, 40);
      QVBoxLayout* layout = new QVBoxLayout(&window);
      layout->setGeometry(QRect(0, 0, 1024, 600));
      layout->addWidget(click);
      layout->addWidget(quit);
      window.show();
      return app.exec();
  }
  

  myslots.h

  #include 
  #include 
  #include 
  
  class myslots : public QObject {
      Q_OBJECT
  
      public:
          myslots() { };
  
      public slots:
          void clickedSlot() {
              QMessageBox* msgBox = new QMessageBox();
              msgBox->setWindowTitle("Hello");
              msgBox->setText("You Clicked " + ((QPushButton*) sender())->text());
              msgBox->exec();
          };
  };
  

  myslots. Pro

  TARGET = myslots
  DEPENDPATH += .
  INCLUDEPATH += .
  HEADERS += myslots.h
  SOURCES += main.cpp
  

  Put all these files in the same folder, run qmake in there, it will produce a Makefile. Run make and it comes out a binary executable called myslots. That and your code works.

  I don't have a lot of changes, I'll let you step through the code yourself to find out what I did. Look at the documentation for help.

  I have not tested this Momentics, nor Alpha PlayBook/Dev. But I'm 100% sure the code works, since I ran it myself.

• How can I reduce the size of the .bar file created by QT to Blackberry Playbook?

  I am doing an application UI for Blackberry Playbook, and that's why try to use QT Creator. But then I have create and deploy a new project: Blackberry Qt Gui Application with only two field (a Text Edit field and another field of push button), the .bar file installed in my playbook is too large (about 80 MB).

  The problem is, it's taking too long to deploy. Although I am new to this platform, I can't solve this problem. Someone can give me a solution, how can I reduce this large size?

  See this comment and his response:

  http://openbbnews.WordPress.com/2012/02/24/Qt-update/#comment-359

• I want to develop an application Live TV for BlackBerry PlayBook. Please guide where can I find the specifications such as width, height, and icon sizes and design factors etc.

  I want to develop an application Live TV for BlackBerry PlayBook. Please guide where can I find the specifications such as width, height, and icon sizes and design factors etc.

  Guideleines of the user and the specifications on the sizes of icons etc to BlackBerry PlayBook OS Applications

  OK, I downloaed the pdf below for UI guiderlines

  UI_Guidelines_BlackBerry_PlayBook_Tablet_2_1.PDF

  Ok

• Display white screen in Blackberry playbook

  Hello

  IAM get blank screen when I load the page html with javascript for display ads using leadbolt blackberry playbook advertising service.

  I developed the application using adobe AIR.

  Please tell me, can I use bannar leadbolt html ads to display ads in the Blackberry playbook?

  I show the code how I used the HTML to display the ads...

  
  
  
  
  
  
  
  
  
  

  Please, help me out of this problem.

  For all the problems with LeadBolt, you will need to contact them directly for support. For problems with AIR applications, please post to the AIR Council:
  http://supportforums.BlackBerry.com/T5/Adobe-AIR-development/BD-p/Tablet

• install the app on blackberry playbook

  I stopped at the stage of creation of debug token. I received emails from blackberry about two .csj files.

  I use flash builder 4.5 and you want to run app on blackberry playbook.

  I had followed.

  http://docs.BlackBerry.com/en/developers/deliverables/23959/Running_unsigned_apps_debug_tokens_15850...

  and

  http://docs.BlackBerry.com/en/developers/deliverables/23959/Signing_your_application_1422721_11.jsp

  but I did not found any tutor how to debug the application on the device, seems to be more difficult than the iPhone or less documents. Can you please someone send me the documents better where I can find those?

  Hi Isabelle,.

  Follow this link...

  http://www.mellisdesigns.com/blog/?p=37

  A syou said, you get two files .csj, .csj- RDK - customer use to create the debugging token.

  With the help of this tutorial, I'm able to debug on the device...