Classic classic speaker Blackberry blackBerry stopped working suddenly

Similar Questions

• NB520 - Wifi stopped working suddenly on its own

  Hello

  I bought my NB520 to Singapore.

  WIFI worked fine for almost 3 years, until very recently, I have a strange problem.
  It stopped working suddenly on its own during almost 2 weeks in June.

  Just when I was about to send it to the repair center, he returned.
  But WIFI comes on and off for a few weeks before he stabalised.
  It works well since then, up to 3 days ago, he set out again like last time.

  Usually, when I switch on the netbook, WIFI (red light) lights a few seconds.
  To use Bluetooth, I just right click on the Bluetooth icon and press "Turn on Bluetooth function" and Bluetooth turns on.

  But now when I do that, it tells me to "connect Bluetooth device".
  Is it a hardware problem or software?
  I spoke with a local technician, but she is not sure too.
  Would appreciate if you can help me with this problem. Thanks in advance.

  Kind regards
  Fionna

  > Is it a hardware problem or software?
  This can very easily get the laptop back to factory settings.
  But I guess that this is not an option for you at this time. Isn t it?

  However, the question that you talk about in your message looks like the isn t correctly chosen and active WLan.
  Usually, you can use the secret key FN + F8 to activate and deactivate the module WiFi and BT.
  Both keys would switch WLan BT as well as disable and enable the modules.

  Have you tested this in the past?

  Where the FN + F8 does not work as it should, I recommend you download the driver Wlan from Toshiba published page for this series of laptop and reinstall the driver Wlan.

  Your comments would be greatly appreciated.

• my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  my wifi stopped working suddenly. It shows no available networks. However, another iphone is able to connect to the router. Help, please

  Hello

  1 have you made changes to your computer recently?

  2 are you able to access the Internet through an Ethernet cable?

  I suggest you to follow the steps in the link and check if it helps.

  Windows wireless and wired network connection problems

  I hope this helps.

• My network card on my Inspiron 1750 has stopped working suddenly.

  My network card on my Inspiron 1750 has stopped working suddenly. I left the computer, while I was working online, went for about 2 hours, and when I came back, I wasn't online more. I can't reconnect to the internet. I was on the phone with the cable operator for two hours Tuesday night, and they said that I probably need an updated adapter. My computer tells me it is good, but then again, I can't connect to the internet to check. I tried an ethernet connection, but it is not recogniziing either. What should I do?

  Hi Joyce,

  Thanks for posting your query in Microsoft Community.

  I understand from the description of the issue that you are facing problem with Internet connection in Windows 7. I will certainly help you in this matter.

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• BlackBerry smartphone App world has stopped working suddenly

  I got the new blackberry bold 9900, changing of blackberry 9800 torch, actually once I spent the peripheral tru to the Office Manager, the world of the application has stopped working, any solution for this, btw, I changed my password and still does not work...

  bermoz wrote:

  When I try to open a session in a massege apears saying;  Unable to connect to your blackberry account.

  While this works for my playbook!

  What is the full message? Sometimes, there is more message... and that 'more' is often useful to better narrow down the possibilities. But if it is, here's a possibility:

  • KB28212 Error "Unable to connect to your BlackBerry ID account" on a smart phone BlackBerry with BlackBerry Device software 7.0

  Good luck

• BlackBerry Smartphones Pinch zoom stopped working suddenly - please help

  while I was using the torch and all of a sudden the pinch zoom feature has stopped working (or rear) - ideas? I thought maybe I hit a series of keys to cut the setting?

  I can zoom in/out via a double tap on the screen, or by using the mouse

  Did you take out the battery?  If this isn't the case, that give a try.

• Links for Smartphones blackBerry stopped working in the browser

  Yesterday, the links Hypertext has stopped working in the Blackberry browser.  In other words, when I click on a link, it highlights, but it won't pick up the page a hyperlink.  It does not display a status of "loading" at the bottom of the screen.

  The screen click on works fine in other applications.  The screen click on works fine in the browser when you use the menus.  It works simply when you click a hyperlink on a web page.

  It was all working fine until I did a Facebook mobile Web page.  This isn't Facebook mobile app, but the mobile Web site read using the Blackberry browser.  I went through the Facebook mobile site on the Blackberry browser several times, and then the links stopped working and no longer works for any Web site.

  I checked the settings and checked and checked and can't seem to find a solution.

  I deleted all the cache of the browser.

  I have not changed the browser settings.

  I was already running OS v4.7.0.75

  Application memory space: 9,4 Mo

  The total memory space: 879.2 mb

  Memory device free space: 853,6 mb

  Space media card Total: 7.3 GB

  Clear media card: 7.3 GB

  Does anyone have a solution?

  Hi and welcome to the Forums!

  Whenever random strange behaviors creep, the best thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, this one suffers memory leaks and other... with a hard reboot is the best remedy. Some have taken to do this on a recurring basis as a preventive measure.

  Best!

• right speaker updated iMac stopped working with 10.11.1

  My iMac late 2009 had its right speaker suddenly stop working.  The only change I've done recently is the update form capitan 10.11 to 10.11.1, is that someone has experienced this problem or give me any advice?

  I fixed this by going to sound settings and reset of the crossfader, how he pushed on the left side is a mystery to me.

• My speakers stopped working suddenly. the message I get is good card can be used, but the volume control does not appear and when I go into sounds and devices, everything is gray.

  My speakers suddenly stopped working. I went to audio and I received a message sound card may be in use. The volume control does not appear atr from the bottom of the screen and when I go into properties, everything is gray.

  Hi BarbaraEvanchik,

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  For reference: no sound in Windows

• Remote Desktop has stopped working suddenly Premium Ultimate

  I used to be able to remote desktop to my laptop with Vista Home Premium on my desktop with Vista Ultimate. All of a sudden, it stopped working (March 09). I tried many steps of troubleshooting without success and I searched and searched online with no resolution. Help! I examined even the laptop to ultimate upgrade, but I seriously doubt that would correct the problem, since I should be able to remote desktop ON the ultimate machine (not in it, of course) and did so successfully for over a year... so far. I don't know what changed between yesterday and today, with the exception of Windows updates. No other software or hardware has been installed. The laptop has wireless and it works very well - I can access the Internet and the network with no problems at all.

  Steps, I have taken/other info: (not necessarily in order - just write them as they come to me)
  1) reset all the workstations and the router (I have a 3rd computer which has XP also).
  (2) checked to make sure port 3389 is open on my router 2 and in the firewall (McAfee). Within McAfee, do ensure that the remote desktop program and service were allowed, both directions and on all the workstations. Also controlled canyouseeme.org to ensure that port 3389 is indeed open and he succeeded.
  (3) connection I tried with the firewall disabled on two workstations and always without success.
  (4) Made sure that on the host, the remote settings have been enabled and all users can connect, using any version of Windows. Also tried unchecking, reset and rechecked.
  (5) the user accounts on all workstations are directors.
  (6) the fact that the Terminal Server service has been started on the host. Tried them stopping and restarting.
  (7) tried ping - success in all directions by the two IP address and computer name.
  (8) network resources are available in all directions - I can see and access files shared all around.
  (9) installed all the Windows updates available. Reloaded later.
  (10) remote desktop from the laptop to the machine off XP is successful. Ultimate machine to XP is successful. From XP to ultimate is successful. The only one who does not work (and it's an important) is from the laptop to the machine by excellence. Argh!
  (11) even tried to restore the laptop provided the factory (tested - didn't work) and then through all Windows updates (test I went - never able to operate).
  (12) fact that Windows Firewall has been disabled on all workstations.
  (13) fact that network discovery, file sharing and public folder sharing is turned on.
  (14) RDP I tried with the name of the computer with the IP address.
  What Miss me? The only thing I can think is that somehow one of Windows Update caused this problem, but my research online for someone else knows this at the same time me are coming short. So I'm completely confused and frustrated!
  Thanks for reading my post, and I'd appreciate any help.
  Sally

  I didn't need to post on the technet forum, because I have solved the problem. I decided to bite the bullet and just give my idea to try and hope for the best (created a first system restore point). The solution was so freakin ' easy... wonder why I couldn't find all the details on how to do...?

  In any case; On the ultimate box (the one I am trying to remote desktop in), I opened the management console (mmc.exe) and add the Certificates snap, for the computer account, computer local. Double click on certificates, double click on the desktop folder remotely, double click on the Certificates folder and highlighted the certificate (there was only one, with the name of the computer as the title) and removed (first of all, I copied and put it in another folder, just in case where).

  This solves completely the whole issue and workaround is no longer necessary.

  I hope this helps someone else.

  Sally

• create dvd Windows has stopped working suddenly.

  in add items from the DVD window, the system suddenly crashes and I get the message... quote Microsoft Windows... next line... Windows DVD maker has stopped working... next para... A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. Unquoteemember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi toofanmail,

  1. you remember to make changes to the computer before this problem?

  2. you have any third-party DVD burning software installed on the computer?

  If you have any third-party CD/DVD burning software, uninstall them temporarily & check if Windows DVD Maker works correctly.

  You can also check the event log to find out what is causing the problem.
  Check out the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  Also check out the link:

  Solve problems with creating a DVD-Video DVD Maker usingWindows

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• XPS13 9350 Wireless stopped working suddenly

  I have had the machine for about 30 days, and it worked fine.  All of a sudden today, the radio stopped working.  I'm on Windows 10.  In Device Manager, the Broadcom 802.11 card is a failure with the error message "this device does not and is being reset. (Code 54) ».  The driver version is 1.555.0.0.

  Please advise on how to diagnose the problem yet, and/or repair.

  Hello

  I had the same thing happen to someone using a Dell XPS 13 9350.

  I went into the BIOS settings and disabled the Bluetooth of the reworked wifi and wireless device. Of course if you need your laptop to be Bluetooth compatible, this solution is not ideal, but in the meantime, it's better than nothing.

  I hope this helps.

• My touchpad stop working suddenly... .Please help me

  I have laptop HP 530. All of a sudden my touchpad stop working when I press on double-click.

  but I'm stil can move the pointer of the mouse over it.

  I don't really know what is the cause of this problem, I need someone to help me please.

  Osama.

  My touchpad back to life finally , I am so happy happy

  After 8 months suddenly and luckily it worked again

  It's a problem with the hardware, by chance, I pressed the left button of the penalty and I have the answer to the pressure

  Thanks to God,

  Thank you anyone help me

  

• Microsoft Comfort Mouse Sculpt has stopped working suddenly.

  Hello, my mouse Comfort sculpt stopped working all of a sudden. I wrote my notes in Notepad and after some time when I tried to start the mouse it does not work. Tried to replace the batteries, but of no use. Updating drivers did not help. Sculpt keyboard works very well. I tried on two machines and having the same problem. The blue laser light under the mouse is dead. However, when I turn on the mouse (power on) the blue light flashes for a second. Not sure if it is a hardware problem. I bought this mouse in January 2014 and worked great until today! Help, please.

  Hi Jordan,.

  From the description of the problem, it seems that it's a hardware problem. I would say contact Microsoft hardware support to improve assistance about the issue you are facing with Microsoft Comfort Mouse Sculpt.

  
  

  How to contact Microsoft if you have questions about your hardware device.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  For more information on how to replace or upgrade to Microsoft, hardware software and manual, click on the number below to view the article in the Microsoft Knowledge Base:

  326246 how to replace Microsoft software or hardware, order service packs and upgrades and replace product manuals

  The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• Director (s) simultaneous stops working suddenly

  Hello friends;

  We are having a problem on the production server, today simultaneous managers suddenly stopped working. We restarted their and the log file came with the following errors:

  Found the dying process: cpid = (1734302), spid = (18790), manager =(802/6268), ORA pid = (27)

  I checked alert.log and it has some following entries at the same time where the error occurred:

  Fatal OR connect error 12170.

  Thu Feb 20 10:27:27 2014

  ***********************************************************************

  Fatal OR connect error 12537, connect to:

  (LOCAL = NO.)

  ......

  NT OS err code: 0

  ORA-609: abandonment of opiodr treat unknown ospid (29226_8410816)

  ORA-609: abandonment of opiodr treat unknown ospid (29224_9930432)

  ....

  I downloaded excerpt today from alert.log and managers of log file:

  http://www.fileconvoy.com/DFL.php?id=g239145bad4810f8d99946199036917abab788db07

  
  

  EBS 12.1.1, DB 11.1.0.7, RHEL 5.

  Thanks and greetings

  Mohamed Ahmed

  Rudy,

  It is most likely a problem of connectivity or data base and I suggest that you to review the following documents.

  Troubleshooting Guide ORA-609: abandonment of Opiodr treat unknown ospid (Doc ID 1121357.1)

  Alert.log watch ORA-609 with TNS-12537: TNS:connection closed (Doc ID 1538717.1)

  11g: ORA-609-TNS-12537 and TNS-12547 or TNS-12170 in 11g Alert.log (Doc ID 1116960.1)

  Thank you

  Hussein