Classic DMVPN on IPSec. The force instead of UDP/4500 ESP?

Similar Questions

• I get reimage opening new windows in safari instead of the links I clicked. I tried the force of suggestion smoking etc and uninstall without success. It seems very little help on this in the normal search engines. Any ideas?

  I get reimage opening new windows in safari instead of the links I clicked. I tried the force of suggestion smoking etc and uninstall without success. It seems very little help on this in the normal search engines. Any ideas?

  On the one hand, you cannot uninstall Safari.  It comes as part of the operating system.  So, I don't know what you've done or what you think you did, but this is not that.  Could you explain more by what you mean with "I get reimage opening in a new window?  You can post a screenshot of what happens?

• How can I reset tabs at the bottom instead of top to v29.0.1?

  Is there a solution that actually works?

  Just migrated to v29 and try to reset the tabs at the bottom instead of use albums about: config.

  Does not work.

  Installed recommended add-on https://addons.mozilla.org/firefox/addon/classicthemerestorer/ in recent thread, how can I put the tabs in the background toolbar in Firefox 29?

  Still does not work.

  Note to moderators: pleaze check your answers and solutions before closing the discussion.
  Previous thread closed by moderator despite the fact that there was no response. (Moses on 29/04/2014)
  I am a user, not a coder. Response of coding (a moderator!) in the previous thread, referring to the Chrome boes NOT help with this question about Firefox.

  Mac OS 10.9.2, Firevox using new version 29.0.1

  napunsaka wrote:

  Installed recommended add-on https://addons.mozilla.org/firefox/addon/classicthemerestorer/
  

  1. Open the modules (Ctrl + Shift + A Manager; Mac: Command + shift + A), then the Extensions category.
  2. Beside the classical theme restaurateur, click Options (or preferences).
  3. In the left upper corner of the window options, select "tabs not on it" and make sure "Tabs in the title bar" is not checked.

• I want to install the Commander of the force star wars on my new PC, but says it is not compatible with windows 64-bit. I try the windows XP mode and it tells me that I need to connect a hardware device 3D

  I want to install the Commander of the force star wars on my new PC, but says it is not compatible with windows 64-bit. I have try on windows XP mode and it tells me that I need to connect a hardware 3D device. I really love the game and I want to use it again.

  Any old copy of Windows XP that could be installed in the host system? If you do not, it should be available at a modest price of an online seller. Perhaps (I'm not too), even an old Windows 98 TO work. The game (using a 3D engine) will not work under pure DOS, so you need a Windows environment so that it can work. Just FYI: If you get this old classic to run, new issues may arise. Known are the "mss32.dll" runtime error (you may need to replace this file with the newer version of SW:KOTOR 1) and the issue of video cutscenes (the games uses an obsolete video codec, Smacker - either you find an old *.) DLLS for it or have you convert movies in a modern format).

  In conclusion: get old games to run on software/hardware modern (it is not only a problem of BONE) is one of the most fascinating and rewarding challenges to a real fan. But do not expect it will not be easy "out of the box" (or simply insert a CD).

• On DMVPNs selective IPSec encryption

  Hello

  I have a DMVPN with two rays on a MPLS-L3-IPVPN network. IPSec over GRE profiles using crypto. Works very well. Now, he only need to encrypt all traffic except EF DSCP. Tried with the help of ACB defining IP-Next Hop for EF-packages and just normal dug routing for all other types of traffic.

  My question is, I know cryptographic cards that use ACLs can selectively encrypt traffic through the IPSec/GRE tunnels. Cryptographic profiles don't seem to have this feature. Is there another way to do this?

  A snip Config by couple spoke it as below.

  ===============

  interface GigabitEthernet0/0.1
  DESC LAN i / f
  IP 10.10.10.1 255.255.255.0
  political intellectual property map route ACB

  interface Tunnel100
  IP 172.16.254.13 255.255.254.0
  no ip redirection
  property intellectual PNDH card 172.16.254.1 103.106.169.10
  map of PNDH IP multicast 103.106.169.10
  PNDH network IP-1 id
  property intellectual PNDH nhs 172.16.254.1
  property intellectual shortened PNDH
  KeepAlive 10 3
  source of tunnel GigabitEthernet0/1.401
  multipoint gre tunnel mode
  key 1 tunnel
  Profile of tunnel DMVPN-Crypto ipsec protection
  end

  GIE Router 1
  no car
  NET 172.16.254.0 0.0.1.255
  EIGRP log-neighbor-warnings
  EIGRP log-neighbor-changes
  ! - router id
  NET 10.10.10.0 0.0.0.255

  ACB allowed 10 route map
  ACB match ip address
  IP 11.2.100.2 jump according to the value
  !
  ACB allowed 20 route map

  ACB extended IP access list
  permit icmp host 10.10.10.5 host 15.1.1.1 dscp ef
  allow icmp host 10.10.10.5 host 15.1.1.1 dscp 41
  deny ip any any newspaper

  ===============

  Note: the routing table contains only a default route learned via EIGRP. Thus, if the ACB 10 past, policy would transmit to the Next-hop (PE). Or would otherwise use 0/0 and route thro' the tunnel.

  Thanks in advance!

  See you soon
  Aravind

  With DMVPN, no.  You will need to return to the use of just cryptographic cards, only using access lists to control what is and is not encrypted.

  If the "EF" traffic was dedicated VoIP subnets so you would have more options, you can choose everything just don't not to route these subnets above the Tunnel.

• DMVPN without IPsec

  Hi all

  Is the operation of DMVPN without IPsec configuration supported?

  I'm testing it right now and hubs are losing conncetivity to rays. I wonder if it is because of not using IPsec.

  Anyone tried this?

  Attila

  I guess you meant PNDH. If so look at the http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080435815.html

• Cisco 1941 DMVPN and Ipsec

  Hello

  You start to replace all of our ISA Server with with DMVPN cisco routers.  So far, we are happy with everything, but I ran into a problem.  I've just set up one of our agencies and the DMVPN works very well, but this location also has a VPN tunnel to another branch that we have not replaced with Cisco equipment yet.  The problem I have is that as soon as I associate an ipsec site-to-site VPN on the router, the DMVPN drops.

  I create the Ipsec VPN:

  map VPN_Crypto 1 ipsec-isakmp crypto

  game of transformation-ESP-3DES-SHA

  the value of aa.aa.aa.aa peer

  match address 103 (where address is allow remote local IP subnet the IP subnet)

  and everything works fine.  As soon as I do the following:

  interface GigabitEthernet0/1

  card crypto VPN_Crypto

  The DMVPN drops.  If I can connect to and run:

  interface GigabitEthernet0/1

  No crypto card

  The DMVPN happens immediately.

  What could I do it wrong?  Here is the config for the Tunnel0 DMVPN tunnel:

  interface Tunnel0

  bandwidth 1000

  192.168.10.31 IP address 255.255.255.0

  no ip redirection

  IP 1400 MTU

  authentication of the PNDH IP DMVPN_NW

  map of PNDH IP xx.xx.xx.xx multicast

  property intellectual PNDH card 192.168.10.10 xx.xx.xx.xx

  PNDH id network IP-100000

  property intellectual PNDH holdtime 360

  property intellectual PNDH nhs 192.168.10.10

  dmvpn-safe area of Member's area

  IP tcp adjust-mss 1360

  delay of 1000

  source of tunnel GigabitEthernet0/1

  multipoint gre tunnel mode

  tunnel key 100000

  Tunnel CiscoCP_Profile1 ipsec protection profile

  If you need anything else the config for help just let me know.  Our main site router, I had no problem with him being the DMVPN hub and also having a handful of Ipsec VPN set up on it well.  I appreciate a lot of help, I really need to get both of these tunnels running simultaneously as soon as possible.

  Yes, but I don't see anything looking for strange (well, configs generated by CCP always sound strange...).

  Maybe you run into a bug. Have you tried a different IOS? Personally I wouldn't use 15.2 if I have to. You can try 15.0 (1) M8 and see if it works.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• using the PDF instead of HTML

  To the right at Adobe.

  After a careful examination of many current technologies for the content of the Web site (including HTML, PHP, Java, JavaScript, MySQL, etc. and systems such as Typo3, Joomla, etc), we decided to drop everything for PDF, being an ISO standard and the de facto standard for office documents. Everyone has Acrobat Reader is installed, the plugin is also installed, and so everyone is able to display a http://.../index.pdf. Problems that are common to other sites, such as the injection of SQL code, the need to keep a backup of SQL server, the demand of space (the naked typo3 installation requires 1 GB of server space), for example, they are all simply, we do not want. Following initial considerations and the advancement, an index.pdf file monkey 200 K holds today, our entire Web site. Dynamic content is loaded by SWFs included read various .xml files. The site displays beautifully on a Mac with Safari and Acrobat X or Windows XP with any browser. There are a few problems, however, which are still pending. Describe us them here.

  Index.pdf of the index.html call can result in a blank page, and the Acrobat Reader plugin makes no effort to inform and help the people customer. It turns out that the v10 of Acrobat Reader is not available on all platforms. For example, linux (ubuntu v11) and solaris (v11) still have Acrobar Reader v9. On linux or solaris, you see a "3d data parsing error" whenever you open a page with swf included.» This happens all the time. It only occurs if your version is different from the version 9.2. 9.3 and 9.4 show the above error. It's a problem of multiple roles, because the latest version on these systems is version 9.4; version 10 is not available from Adobe, and most of the people are not ready to go back to version 9.2, which is not available from the default package of the System Manager. Other systems are not without problems. Apple OS x, for example, the plugin is only available for Safari. If your default browser is Firefox, Chrome or Opera, you don't see the index.pdf. You have to use Safari. Apple iOS, even Safari fails to execute the index.pdf, because Acrobat Reader is not available for this platform. We have solved most of these problems via a HTML + JavaScript loader which performs a compatibility check-up. If all tests are successful, the HTML code then calls the PDF file. If the tests fail, then a courtesy message, explaining the problem and describing the steps the user must perform to solve the problem (s). If the user does not wish to use the Acrobat plugin, then the user is redirected to the RSS STREAM. The site is based on the RSS STREAM, and so the user has access to (most of) the content of the site. You can read this code at the following address: http://www.MadreAcqua.org/index.html. It is not enough, however. We had people with Acrobat Reader X installed on supported Adobe Systems, but their browser plugin remained version9; It turned out that the update of the Reader app could not update the Player plugin. On Windows 7 + updates, with Firefox 4 + updates and Acrobat Reader 10 + the index.pdf does not display included sovereign wealth funds. Note that it works on Windows XP + updates and Adobe Reader 10 with any browser. The failure on Windows 7 is a mystery. There are also people who are sick and tired of Acrobat Reader update by hand, or do not have the skill or the time to do it. It is also the source of the recent security problems.

  Below you will find other problems.

  1. the index.pdf includes sovereign wealth funds for its dynamic parts (RSS readers and video). Sometimes, random, sovereign wealth funds, do one of the following: they disappear (the only way to make them appear again is click on their area); they disappear and reappear as the Christmas lights (the only way to stop is to reload the page); also, they disappear or reappear when resizing the browser window.

  2. the mouse wheel allows to reverse the pages instead of scrolling. Specifically, each page of the site is displayed in its entirety. If we do scroll, however, the engine should try to scroll, find that the page is displayed in its entirety, and so nothing should happen. Instead, the engine displays the next page of the PDF file. The PDF file was built with the indicator "single page view", but the engine force mode 'to enable scrolling '. This seems to be a bug in the Adobe Reader software.

  In short, dear Adobe, please ensure that all platforms have the same version of the Acrobat Reader plugin, and that the plugin is updated automatically, in the same way to Flash Player 10.3. One plugin (pdf + swf) would also be useful. Please also make a charger official as part of the plugin, both to solve (mostly) the above problems and increase your own awareness of them. Otherwise implies your inability to offer its support to HTML ++.

  Best regards

  M.A.S.T.

  Not a bug - you're wrong points.

  If you embed a SWF file usinguniversal mode (Acrobat 8 and earlier versions) l, then it will never print, because it is never part of the PDF page. Legacy content is an annotation that is managed by an external program (in the case of the legacy SWF, a copy of office of Flash Player). For security reasons, there is no communication between the engine PDF printing and that the external program, so when you print the PDF file you will see nothing except the poster images.

  If however you embed your SWF in Acrobat 9 native mode +, it will play using the built-in Flash Player copy and will be printed, as long as you select "document and annotations" in the menu options and print on paper, it will look exactly as it does on the screen at the moment you press the button print, provided the SWF correctly handles step scaling.

  In addition, you can write a PDF with SWF file included for printing, but when you print it, the content of the included SWF file does not appear on the paper. This is part of our list of bugs.

• How can I get thunder bird to move the emails form the server instead of copy them?

  Whenever I get my email remains a copy on the server.
  until I have to log on to the server and delete them.
  How can I get the emails to be moved from the server instead of being copied?

  Because you don't want to leave a copy on the server that would be the first to uncheck.

• From 8/24, most of my emails go directly in the trash instead of the 'Inbox '. I have some companies, like the Daily Herald, etc. that I want to receive.

  I don't know if it was the result of an update to Thunderbird if this problem started when I created a filter for unsolicited junk e-mail that I had received. When I clicked "Run", each email "in box" went in the trash, instead of just the item that I had highlighted. I then highlighted all of the trash and he returned to the Inbox. None of the items I've retrieved from the trash and you want to receive were among the 685 items listed in my filter of junk e-mail messages. I have no idea how all of these got messages filtered as trash. I had hoped the problem has been resolved, but as the day wore on, I noticed that almost every email I received still went straight to the trash.

  Examples of emails I love receiving: Daily Herald updates, Netflix, global market, Best Buy, etc. I don't have to demand for payments of invoices from the 8/24, but I have to assume automatic responses to planning a payment will also go to the trash. Even the Mozilla Support e-mail that was sent just when signing into my account went straight to the trash. There are several emails I want to keep to my file, so I don't want to close my account and start again. It seems personal friends messages are still in the 'box', but each business email goes directly to the trash if desired or not. The screening went to the extreme.

  The help section does not resolve this issue, so I am at a loss on how to solve this problem. It doesn't seem to be a process to do the opposite of message filtering. In the dream world, I would need to highlight the messages I want to receive.

  An overview of this issue would be most appreciated.

  Problem solved. I used Google search for my problem and found some very good information on troubleshooting. The last filter, I created for spam, I clicked on 'does not contain' rather than 'contains' and therefore each email message unique since that time obviously did not contain these key words, as they were going into the trash, I received!

  What a relief to retrieve new messages in the box in. Thanks Google and those who offered assistance to someone in the past.

• My magic mouse is going to appear on the screen instead of what I clicked. (El Capitan)

  My magic mouse is going to appear on the screen instead of what I clicked.  (El Capitan 10.11.6)

  That doesn't seem to be a problem of magic mouse.  More like a necessity to find adware or malware.  Download this verification, etrecheck and publish the report here.

  https://etrecheck.com/#about

• When I click on the 'Get' button in the app store for El Capitan, the beachball cursor rises and crashes the app store (not responding) in the force quit window...

  When I click on the 'Get' button in the app store for El Capitan, the beachball cursor rises and crashes the app store (not responding) in the force quit window...

  How can I fix it?

  Nevermind, I restarted the computer and it was fixed

• How to get a glimpse of the images instead of the icons in the finder

  Hi, since I downloaded El Capitan pictures cannot be previewed in finder more unless I open them in the application preview or in a sidebar. Instead, according to icon, on top of the image name, she never shows just the jpeg preview icon. I checked the option to see the preview instead of the icon is activated in the options of presentation/overview, that changes nothing. When it's like that, it is impossible to get an overview of images or do not lose time to open them individually.

  Any ideas? Thank you very much.

  To help read the information on one of the jpeg files (command - I),

  According to open it with, check if the preview application is associated with jpeg files:

  

  If not put open with: on the Preview.app, then click all change...

  NB. You will need to restart the Finder subsequently.

• When you press the new tab, how can I get the homepage instead of the history of tiles?

  When you press the new tab, how can I get the homepage instead of the history of tiles?

  You can try this.

  • https://support.Mozilla.org/en-us/KB/new-tab-page-show-hide-and-customize-top-sites#w_how-do-i-turn-the-new-tab-page-off

  Instead of the parameter mentioned pref in about: blank, you can enter any site of your choice.

  Ex: encrypted.google.com

• Some dropdown menus drop on the left edge of the page instead of under the main menu

  Some drop-down menus at the left edge of the page instead of under the main menu.
  This does not happen on all web sites. Very confusing.

  Yes, I see the same thing with Firefox 21 with the menu container.
  
  Works fine for me with the beta version of Firefox 22 and later, it's broken in the current Firefox version 21.

  You can consider making a custom of the beta version of Firefox 22 Setup or wait a few weeks until Firefox 22 is released.

  • http://www.Mozilla.org/en-us/Firefox/all-beta.html
  • http://www.Mozilla.org/en-us/Firefox/beta/

  You will need to create a new profile for the beta version, so not to launch Firefox after installing the beta.

  See:

  • http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
  • http://KB.mozillazine.org/Shortcut_to_a_specific_profile
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox