Classic generic column report - update the list column

Similar Questions

• Windows Media Center has stopped updating the lists Guide for Windows 7

  Windows 10 will go out the next Wednesday July 29, 2015. I have Windows 7 and I have technical problems with the Guide in Windows Media Center lists. This isn't updated Guide lists and I wonder if this problem is related to the upgrade of Windows 10?

  I called a technician to answer Microsoft desktop and the technician fixed my computer errors. Unfortunately, he could not fix this problem. Even though I always reset and auto update of listings in the Guide, the result will prove be the same with "no data."

  Windows Media Center has given me many error messages:

  Windows Media Center

  "Windows Media Center has corrected a problem with your registration data and will download the Guide even once. You should review your records to make sure they are always planned properly. »

  Failed to download

  "The new TV configuration data could not be downloaded. Existing data, if any, will be used as you continue by configuring the TV signal. »

  Downloadable guide is not available

  "Downloadable TV Program Guide listings are not available due to previous failures of download. For more information, right-click on the Windows Media Center system tray icon and open Windows Media Center update log. Select back to try again. You may be able to get the TV show lists, if they are available. »

  Guide download error

  "The Guide could not be downloaded. For more information, then Windows Media Center system tray icon right-click and open Windows Media Center update log. »

  I can watch TV on the computer using Windows Media Center and manually record TV shows, but it is difficult for me to record TV shows without ads Guide on Windows Media Center.

  Note to update (as of August 2, 2015):

  The Electronic Program Guide (EPG) for Windows Media Center Guide ads was already programmed by zap2it until July 21. After July 21, zap2it is no longer can update the lists Guide for Windows Media Center.

  July 23, Rovi Corporation's new Electronic Program Guide (EPG) for Windows Media Center Guide ads.

  From 23 July, listings in Windows Media Center Guide is running back to normal for Windows 7 users.

  My Guide Panel is equipped with a selector more [on the listings in the Guide] where is the expiration date. I hope that Microsoft does not support Windows 7 WMC.

  Please don't waste your time trying to solve the WMC, it is the expiration of the license that is causing the problem. I know it's frustrating.

  On the other hand, is - can anyone say with certainty that WMC is available on Windows 10? No charge for the upgrade to Windows 7?

  The way I see it, not providing the function of key in W7 WMC guide is motivation upgrading to W10, assuming that WMC is available.

  Hopefully Microsoft will give us the fix for WMC in W7.

• Update the list of features supported

  I suggest that you update the guide for help on the supported features.

  Recently I was wrong due to this list on the supported features, horizontal sliding, flattened articles on Android devices.

  The list shows that its not supported on Android, but in fact it is.

  http://helpx.Adobe.com/Digital-Publishing-Suite/help/supported-feature-list.html

  Sorry, I missed that one. I've updated the help article. Thanks for reporting the error.

• Windows Update empty list updates the list (w / updates)

  I have a weird problem with Windows Update on the Windows 7 x 64 (which obviously appeared after a while - not straight out-of-the-installation).
  The problem is this: I have open Windows Update, click "Find updates", it tells me there are 3 optional updates available, click on "3 optional updates available" to make me choose which install, opens the list of updates, but... it is empty! And on the left, he continues to say "Optional (3)" (screenshot to http://img109.imageshack.us/img109/4839/wufail.png )
  This happens also with the important updates, that they however to settle as they are selected by default, I guess.
  Needless to say, without hidden updates are present...

  Suggestions?

  Thanks in advance

  Giulio

  Sorry, as the problem appeared, now he's gone... no idea how that happened (other than a BSOD forcing _another_ reboot...)! So... Detective Conan!

• The Task Manager, update the list of tasks and processes, but removes them from the list, the next second.

  It was fine a few days ago, the list of tasks and processes will not be updated until I open/close something. Now, it refreshes the list every second. I tried to change the speed of update, but makes no difference. An answer by tomorrow would be the best.

  More information:
  Windows 7 x 64
  Home Premium Service Pack 1
  Using AVG anti-virus

  Hello

  Thank you for your response.

  Keep the computer in a clean boot and check the status of the issue.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8.

  http://support.Microsoft.com/kb/929135

  Note: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  I would like to aslso season allows you to check the status of the question in a new user account.

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

• Can someone help me with an 'easy to update the list of products?

  I'm doing a site for a client who are selling second hand machines and want to have a page with products that are for sale.

  This page should be easy to update because my client is going to do it himself.

  The problem is that if the list's container 10 products and, for example, the number 4 is sold, we do not want a gap in the list when my client is made number 4 on...

  We want a nice and smooth list that, when a product is sold and removed, there will be a nice list of 9 products.

  It should be really easy to update with editing in the browser... Anyone with an idea how to solve this problem?

  Thank you!

  Through IBE, your customer can change the image and publish the modified image/text. But to change the list itself with the same design, you would need for that of Muse.

  Another idea would be to show the item as "unavailable" once it is sold out to keep the list in the same format without modification.

  Thank you

  Sanjit

• How can I update the list of lenses for Nikon 500 mm F4.0 and Nikon 35-70 mm f 2.8?

  In the development phase can corrective lenses for lenses known according to the manufacturer.

  However, the above mentioned 2 lenses are not in the list.

  How can you include in the list?

  Thank you

  Ofer

  You must locate the profiles of boards or create profiles for the lenses. There is a utility, Adobe Lens profile Downloader:

  Adobe - Ado be Lens profile Downloader: For Windows: Adobe Lens profile Downloader 1.0.1

  Adobe - Adobe Lens profile Downloader: for Macintosh: Adobe Lens profile Downloader 1.0.1: thank you

  If you do not find one available, you can then use the lens profile creator:

  Adobe - Adobe Lens profile creator: for Macintosh: Adobe Lens profile creator 1.0.4

  Adobe - Adobe Lens profile creator: for Windows

• UPDATE the list of columns

  Hi, need help with the following:

  CREATE TABLE tbl_1 (
      rec_id NUMBER(9),
      col1 NUMBER(9),
      col2 NUMBER(9),
      col3 NUMBER(9),
      col4 NUMBER(9))
  /
  CREATE TABLE tbl_2 (
      rec_id NUMBER(9),
      col1 NUMBER(9),
      col2 NUMBER(9),
      col3 NUMBER(9),
      col4 NUMBER(9),
      col5 NUMBER(9),
      col6 NUMBER(9))
  /
  INSERT INTO tbl_1
       VALUES (101, 11, 21, 31, 41);
  INSERT INTO tbl_1
       VALUES (102, 12, 22, 32, 42);
  INSERT INTO tbl_1
       VALUES (103, 13, 23, 33, 43);
  INSERT INTO tbl_1
       VALUES (104, 14, 24, 34, 44);
  
  
  
  INSERT INTO tbl_2
       VALUES (101, 1, 1, 1, 1, 1, 1);
  INSERT INTO tbl_2
       VALUES (102, 1, 1, 1, 1, 1, 1);
  INSERT INTO tbl_2
       VALUES (103, 1, 1, 1, 1, 1, 1);
  INSERT INTO tbl_2
       VALUES (104, 1, 1, 1, 1, 1, 1);
  INSERT INTO tbl_2
       VALUES (105, 1, 1, 1, 1, 1, 1);
  
  
  COMMIT ;
  
  --Create procedure pr_upd(col_list) passing list of columns which has to be updated in TBL_2 with values from TBL_1
  --for example if pr_upd ('col1,col3' ) called then only col1 and col3 updated in tbl_2 (with values from TBL_1)
  
  --After procedure pr_upd ('col1,col3' ) called:
  SELECT * FROM TBL_2 
  
  REC_ID    COL1      COL2      COL3      COL4      COL5      COL6      
  101       11        1         31        1         1         1         
  102       12        1         32        1         1         1         
  103       13        1         33        1         1         1         
  104       14        1         34        1         1         1         
  105        1        1          1        1         1         1

  You will need to use dynamic SQL statements. Something like

  CREATE OR REPLACE PROCEDURE pr_upd( p_col_list in  varchar2 )
  AS
    l_sql varchar2(1000);
  BEGIN
    l_sql :=
      'UPDATE tbl_2 ' ||
      '   SET (' || p_col_list || ') = ' ||
      '     (SELECT ' || p_col_list ||
      '        FROM tbl_1 ' ||
      '       WHERE tbl_1.rec_id = tbl_2.rec_id )' ||
      ' WHERE EXISTS ( ' ||
      '      SELECT 1 ' ||
      '        FROM tbl_1 ' ||
      '       WHERE tbl_1.rec_id = tbl_2.rec_id )' ;
    EXECUTE IMMEDIATE l_sql;
  END;
  

  which product

  SQL> CREATE OR REPLACE PROCEDURE pr_upd( p_col_list in  varchar2 )
    2  AS
    3    l_sql varchar2(1000);
    4  BEGIN
    5    l_sql :=
    6      'UPDATE tbl_2 ' ||
    7      '   SET (' || p_col_list || ') = ' ||
    8      '     (SELECT ' || p_col_list ||
    9      '        FROM tbl_1 ' ||
   10      '       WHERE tbl_1.rec_id = tbl_2.rec_id )' ||
   11      ' WHERE EXISTS ( ' ||
   12      '      SELECT 1 ' ||
   13      '        FROM tbl_1 ' ||
   14      '       WHERE tbl_1.rec_id = tbl_2.rec_id )' ;
   15    EXECUTE IMMEDIATE l_sql;
   16  END;
   17  /
  
  Procedure created.
  
  SQL> exec pr_upd ('col1,col3' );
  
  PL/SQL procedure successfully completed.
  
  SQL> select * from tbl_2;
  
      REC_ID       COL1       COL2       COL3       COL4       COL5       COL6
  ---------- ---------- ---------- ---------- ---------- ---------- ----------
         101         11          1         31          1          1          1
         102         12          1         32          1          1          1
         103         13          1         33          1          1          1
         104         14          1         34          1          1          1
         105          1          1          1          1          1          1
  
  SQL>
  

  Justin

• Cost of updating the lists of filters for Forefront TMG

  Through our MS schools agreement (Volume License), we have purchased a license for Forefront TMG, which is installed and works very well. Would soar, as to clarify cost/licensing of the filtering side of this product different staff members have found different information (some contradictory) on this approval.

  The main request is the access to updates for filters (lists updated groups or sites etc.) so that, for example, if block us access to the category of games that list URLS within the category is up to date and will continue to be updated by MRS. Is there any additional cost to do it this way?

  Hi Murray has,

  I suggest you to see the link below:

  http://www.Microsoft.com/forefront/en/us/suite-pricing-licensing.aspx

  You can also contact TechNet for more information on Forefront for Microsoft Exchange:

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Windows will not update the list of printers

  When I select Add Printer witout a CD (ie. windows update) it fails and says try again

  See: http://windows.microsoft.com/en-US/windows7/Install-a-printer

  and http://windows.microsoft.com/en-US/windows7/Automatically-get-recommended-drivers-and-updates-for-your-hardware

  It is always recommended that get you the drivers for your hardware from the manufacturer site, in this way, you get the right driver and the updated driver.

  So, if you try to install a printer without the CD, go to the manufacturer site rather than trying to do it through Windows Update.

• update of the list of imap folders

  How do you quickly update the list of imap folders?

  I was hoping F5 or so would just, but retains the Thunderbird download (how can this be prevented?-stop button does not work) messages received, but the update of the lists of file seems to need a reboot.

  The fastest way is to close and reopen the ThunderBird, which is a bit awkward. A simple F5 on the folder main mbx should update the files in a folder should update this file, always appealed to a low level (can be configured to do more/less with SHIFT f5 etc.).

• How to have the list of dates automatically updated the site, without manually changing in Muse

  Hey, I design a site for a group that I play the drums in and I was wondering how I could update the list of concerts, we have, without having to manually edit in Muse then download again. Is there a way to past shows being removed without doing me it manually?

  I believe you are referring to events with calendar on the page where you can update the calendar with the dates, in which case you use the event of third party system then Muse will not control it, but if you created that in Muse itself then you will need to manually edit of Muse.

  If the site is hosted on BC, then you can use the events module to view the dates and details, the end site, you can schedule events and that expired will be removed from the calendar.

  Thank you

  Sanjit

• Entrust G2 root is not in the list of Mozilla's CA certificates

  We noticed that Entrust G2 root certificates only are not in the list of Mozilla's CA certificates. We contacted Entrust and they confirmed that the certificates were sent to Google, Microsoft and Mozilla, and there was nothing they could do to solve the problem.

  Are there plans to update the list with new root SHA2 certificates? We are having problems with false positives vulnerability and problems due to not having Mozilla do not these certificates in the trust store.

  https://www.Mozilla.org/en-us/about/governance/policies/security-group/certs/included/

  Hello, the root certification authority should work with mozilla to get these certificates in the store of the browser trusts. This question seems to be tracked in bug # 849950.

• Apple does not list a country the list code to add trust number (validation of 2 steps)

  I used the gate 2 years with my number + 849xxxxxxx

  Today I turn off validation of 2 steps to config something, so I tried to reactivate it.

  Then, I realized that Apple updated the list of country code, and this is totally wrong with the Viet Nam.

  It is + 848 (Viet Nam) instead of + 84 (Viet Nam) as before.

  + 848 is a new type of phone number here in the Viet Nam, many people here still use the old kind of number like me (+ 849), not the + 848. That's why I can't re - activate 2 validation of steps again.

  My friends also had the same problem as mine. I think that Apple should give the country code option to + 84 (Viet Nam), not the + 848 (Viet Nam) as soon as POSSIBLE, now that my account is not protected because of this error.

  Thank you.

  I totally agree with you.

  I have not even worse, I can't receive the verification Code when loging itunesconnect.apple.com, so I can't download the new version of my application.

  I hope that Apple will fix it as soon as POSSIBLE.

• Report of the VM guest

  Hello

  I want to create a daily report that lists the virtual machines that were created and a few details about them.  Specifically: date of creation, memory and cpu allocated, tools and HW versions, home hardware (CD-ROM, etc.).  Before putting my skills limited to scripts for the test lol, I thought I'd run it by the community to see if something like this already exists, there is a better way to do it, or if anyone has any other suggestions.   I'm trying to make sure the construction team is actually the spec construction.   Environment: ESXi 5.1, 5.1, vRealize not vCenter.

  Thanks in advance!

  Bob

  You can analyze the events of new virtual machines the created or deployed.

  See  3. Re: report from the list of the VM created last year.   for an example.

  You can set the time interval as you wish with the Start parameter.

  Once you have the new virtual machine, it comes to a Get - VM and collecting the properties that you need