Windows Update empty list updates the list (w / updates)

Similar Questions

• Windows Update informs that the updates are available but the available updates list is empty

  Windows 7 update gives me updates (1 important, 2 recommended) but when I click on the text that would normally be the list of updates of the list that I show is empty.

  So far, Windows Update worked fine. Any idea?

  Who has not helped, according to these instructions gives me the same update screen I've always seen.

  In any case it is not important to me anymore, once I rebooted my computer the screen update began once more to work.

• Windows 7 Windows Update error 80070422 and empty list updated

  Hello.

  Problems with Windows Update, got above error when you try to run it. Established that the Windows Installer of Module service is disabled (not by me, I suspect some malicious programs). Enabled and started this service. Ran Windows Update then OK. I noticed that the history of updates is empty. (I've updated for years).

  Any ideas on what went wrong. I should have concerns on my computer, is there anything else I need to do?

  Computer is protected by Norton that is perfectly up to date

  Concerning

  Terence

  Gerry,

  Thank you very much for your detailed response.

  I managed to get the Windows Update to work, he finds 4 updates, the complete list of updates after installing appeared them again. I checked this list and it is accurate.

  I have no idea how it happened, but I'm afraid that the situation is resolved. I will contact you if the ridiculous situation arises again unless that advise you differently.

  Concerning

  Terence

• The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

  The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

  Hi Sarma_RN,

  1. When you receive the error message?

  2. update you are trying to install?

  3. When was the last time you were able to install updates?

  If Windows Update, error 80072ee2 during updates, the Windows Update servers may experience an unusually high number of requests for updates. Close Windows Update, wait 10 to 15 minutes, and then run Windows Update again. Alternatively, you can wait for automatic update of Windows run at its next scheduled time.

  These errors can occur caused by one of the following problems:

  • Applications or processes that interfere with Internet communications
  • Problems on your computer
  • Strong Internet activity
  • Recoverable database errors

  See the Microsoft article and try the steps mentioned below.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The automatic Windows Updater is not in my list of all programs.

  Can I download it form Microsoft site?  Is the case, how do I know if what I download is appropriate for my VISTA operating system?

  Hello

  Vista includes Windows updates. Panel configuration-update of Windows.

  Or Start - type in the search-> Windows Update search at the top of the list box and double-click it.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Error 0 x 80070424 appears on the windows update site. The Windows Update service is missing from the list of Services.

  I am running Windows XP Professional SP3 with Kaspersky Internet Security 2012.  Windows is no longer automatic updates (don't know how long it has been like that), and when I try to manually check for updates from the Windows Update Web site, an error is returned: 0 x 80070424.  After some troubleshooting, I found that Windows Update is missing in the Services list.  Also, I ran a few Microsoft Fix It solutions without success.  Please notify.

  Hi Gregs,

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the steps in the link and check if that helps.

  Error 0 x 80070424 occurs when you use Windows Update, Microsoft Update, or Windows Firewall

  Method 2: Run check file system (CFS) analyses and checks to see if it helps.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

• Windows update says it was installed successfully, but when you look at the list of the installed update it doesn't see the

  ORIGINAL TITLE: problem of update of Windows vista edition Home premium

  I just bought a laptop Toshiba of ebay, in excellent condition, the operating system is windows vista Home premium and the system is X 86 based. I have no trouble getting security updates or anyothers with the exception of SP1. When I do a windows update installation, it is said it was installed successfully, but when you look at the list update installed, it doesn't stand and she also works not highlighted on the sys.info page. I have already run the windows update fix the tool several times, but it doesn't solve the problem. Also update keeps telling me to install the SP1 package. I think that the number on the pack is KB96330 (not sure but I'll check in a few minuets when I go home for lunch). What should I do to get SP1 + 2 installed?

  .. .he had appeared as if it was handed to the way in which it left the factory.

  Looks can be deceiving, especially for what it is bought on eBay.

  [If you bought used shorts Jockey on eBay, would you wear them before you had washed in water hot & bleach?]  I hope not! ]

  See the poster in this thread and follow the instructions of (my) WHOLE (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://answers.microsoft.com/thread/c44429fb-3f7c-4646-8529-5a97bb3cd0eb

  If you need additional help with the new installation, you can start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

• No installer of Windows in the service list - Windows Update will not update

  Windows install is NOT in my list of service.  I can't install the 4.1 because there is no file for Vista which works.  Ms. Mr. Fix It, or anything that does not work. I can't run Windows Update. I am slot than Vista Ultimate 32 bit SP2.  Anyone have any ideas?

  Hi tabrams,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What fixit did you run?

  Follow these methods.

  Method 1: The analysis of file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 4: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 5: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  Reference: http://blogs.msdn.com/b/windows_installer_team/archive/2007/10/01/what-happened-to-windows-installer-4-1.aspx

• Win Update in the add a printer window is unable to retrieve the list.

  In the add a printer of the add-on devices and Printers window, it invites you to click on "Windows Update" to 'see more models'.  Only problem is, when cllicked, he's sitting there does apparently nothing, but after a few minutes at a time, he comes back and says that Windows was unable to get a list of devices from Windows Update and to try again later.   I tried more later dozens of times with permanently differnet of the day and night with no more success.  I would really like to see these additional models to see if one of my printers old faithful is in there.

  Is anyone else having a similar problem, and if so, have you found a cause or solution?

  Simply visit the web site of your printer and check if there are avilable the win7 drivers

• Get "Windows could not obtain the list of devices from Windows Update, please try again later"

  Trying to load the printer driver for HP DeskJet 990c on Win7 64-bit (Intel i7 - 2640M). All online sources, including HP say pilot is available by clicking on "Windows Update" in the install printer driver dialog box. In doing so, always get message "Windows could not obtain the list of devices from Windows Update, please try again later".

  Windows Update is set to "Download updates but let me choose whether to install them".
  Downloaded and extract full X 86 driver catalog (X 86 - all - 4189_1228a7cf7b1aac21346b20cb6e21db409dde9e72.cab) from the Windows Update site http://catalog.update.microsoft.com/v7/site/Home.aspxcatalog. 'Disc', stated in the dialog of the printer driver install and selected prnhp001. INF, received immediatelt message this specified folder does not compatible device driver.
  Also tried to do the same thing with the IA64 catalog (IA64-all - 4190_6e0f85bb67d0038a6406fc71b777a1906a87888c.cab), not surprisingly has the same result.
  Also tried to do the same thing with the AMD64 catalogue (AMD64-all - 4188_bacd1413e93b4a6362d9a2ca653c869f1c02f6f7.cab) and curiously that appear additional list catalog successfully. However, when choosing hp deskjet 990 c, as soon as the driver begins to install the error box appears saying "printer driver not installed, the operation may not be completed (error code 0x00000002).
  Cannot find any other relevant catalogues on the site Windows Update Catalog (which is X 64).
  Have tried to launch MicrosoftFixit.wu.RNP.85259331246416206.3.1.Run.exe, which is worth 1 point fixed, but has no effect on the problem.
  A short of ideas. How can I get my hands on 990c driver for Win7 - 64 Intel?
  Thank you.

  .. .the printer I'm trying to install is a HP DeskJet 6122.

  You should have clearly stated that in your first post.

  See this related thread in the Hardware Win7 forum-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-driver-for-hp-deskjet-6122/a70f56dd-5be1-4ad8-bba9-701a09f8392c

  more than 25-online http://answers.microsoft.com/en-us/Search/Search?SearchTerm=6122+deskjet&CurrentScope.ForumName=Windows&CurrentScope.Filter=windows_7-hardware&askingquestion=false

  Once again, good luck.

• Windows 8 "Windows Update" absent from the list of 'change PC settings.

  When I first upgraded to Win 7 to Win 8, there was a "Windows Update" entry as last element in "PC settings" when I used the charm of parameters.

  It is more listed.

  If I search for Windows Update and click on the tile which is, he spends "PC settings" page but display a "Page not found" error message.

  No idea how to solve this problem?

  This is the second time it happened to me, the first, I thought that I could of got a virus or something. So I did a refresh and the problem was solved. But I remember correctly install a program the first time (I don't remember the name), and then links to certain parameters were missing.

  I know I probably have réactualisiez, because there is no viable solution available at this time. But refreshing should NOT be the solution. Because from what I see, it is not limited to a single program. So it means that the issue could occur for a variety of program installs. It is devastating and it is one will not install anything for fear of the question happening.

  I also hesitate to install new programs, as the refreshment of the PC 'solution' is no solution at all and I am less enthusiastic to spend all my time to 'fix' things when they worked perfectly well on Windows 7.

  Once again, I think that MS has a major problem here and surprised that it did not fall in beta as most of the things I do on my PC is quite conventional.

  I will continue to follow this thread to see if there is any progress or enter additional to help isolate the problem.

  I discovered that patches of restoration of windows the problem, better than the discount. But not yet the real difficulty that is needed.

• KB253842 appears under the name 'successful' on 'windows update' but not listed on my computer control panel "view windows updates".

  KB253842 lists as successfully installed in "windows update" after installation, but never appears in my control panel 'programs' 'show updates' and this update is constantly as 'new updates available. It is actually installed on my computer?

  Hi Janice,.

  In addition, check to see if this article helps you.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

• Windows Update for Vista family 32-bit premium does not update all. 57th error and sku011.cab for office 2003. Malicious tool not updated. Stays on the list was updated even after having managed States.

  Office 2003 sp3 do not install in windows update. It is a 108.2 MB file, no kb #. Under 2 other 2003 office updates. KB977713 for office outlook and for office 2003 update kb907417. 57F error message comes out after having failed in windows update. Sku011.cab missing error comes just after process fails at the end of the attempt to update for the updated 2003 3 office. Tool kb890830 in windows update to install malicious but indicates successful when finished. Returns to windows update to install. All other above mentioned updates show missed.

  Thanks for your time,

  Vincent Ciaramella

  The malicious software removal tool does not use an installer. As a general rule, when you run the malicious software removal tool, it creates a temporary directory named at random on the root of the drive of the computer. This directory contains several files, and it includes the Mrtstub.exe file. Most of the time, this folder is automatically deleted after the tool to the end of execution or the next time that you start the computer. However, this folder may not always be automatically deleted. In these cases, you can manually delete this file, and this has no adverse effect on the computer.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  With regard to the Office updates:

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyId=1B0BFB35-C252-43CC-8A2A-6A64D6AC4670 seems to be an update very old "update for Office 2003 (KB907417)"

  With regard to the http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=da24d44b-4d6e-4bcd-b7cd-ca56bf6c0ba7
  Update for the junk e-mail in Outlook 2003 (KB977713) filter

  Have you tried manually download KB977713 and install the same.

  Sometimes, however, it still doesn't work: full-file version update may request Office source files
  http://support.Microsoft.com/kb/840169

  TaurArian [MVP] 2005-2010 - Update Services

• Get 643 and 646 error codes when you try to install Windows Update. Everything else works with updateing, Itunes and other updates, but not Microsoft. I did what is listed here as much as I can understand, but still have the problem.

  Every time my computer upgrades, they fail to install.  I tried the fixes on the web site and still have the problem.  Errors are 643 and 646.  I continue to download and and keep not install correctly

  Hello sugarlake,

  Thank you for using the Microsoft answers Forums.

  Solution for error 646:

  Disable all Firewalls and try to install the updates and the stand-alone installation (download manually).

  Reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Restart the computer after the update is installed.

  Also check with

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6e716883-7af4-4A9F-8665-2f4dd57eee8d

  http://support.Microsoft.com/kb/822798

  That should solve the problem.
  _________________________________________________________________

  Solution for 643:

  It is a common problem with the updates of the .NET Framework.

  http://support.Microsoft.com/kb/923100
  http://support.Microsoft.com/default.aspx/KB/976982

  http://www.networknet.nl/apps/WP/archives/324

  Follow the steps in the web links above to solve the problem.
   
  That should do the trick for you.

  Thank you.

  Kind regards

  Augustine.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C

• Guard re-setting to update Windows Update Vista SP1 successfully, but it never appears in the list of installed updates!

  This happened for months and I just found out 3 days ago.  If you look at the history of the update, you see that SP1 has been installed successfully for 14 months (more than 50 successful install of SP - 1).  I was prompted to investigate the automatic update of Windows, is that it takes forever for this system to stop and start.  He is constantly confuguring or install updates and there is no stopping it most of the time.  I can't seem to get it to start in SafeMode as he zips through even if the f8 key is pressed and causing a beep.

  At first I restored to an earlier point, but noted that there was very little to choose restore points.  I contacted HP and they recommended a difficulty of their site that helps with updates.  I ran and persistent .net updates succeeded (However, he is the one who seems to be back).  I ran the program of preparation for Service Pack 1 on the site of Ms.  I ran the program fix - it on the site of Ms.

  Can someone help me please?

  Hello
   
  Thanks for posting on Microsoft Answers.
   
  It seems that updates could be partially installed on the computer.
   
  I suggest you open programs and features and select view installed updates and look for the updates and make sure he completely uninstalled.
  Once the updates are completely uninstalled try to perform the updates of Windows and check to see if there are completely installed on the computer
   
  Before you run Windows updates ensure that security software are disabled temporarily.
  Also to put the computer in a clean boot state and check
  Following steps will help you put the computer in a clean boot state:
   
  1. click on start, type msconfig in the search box and press ENTER.
  2. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  3. in the general tab, click Selective startup.
  4. under Selective startup, clear the check box load startup items.
  5. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  6. click on OK.
  7. When prompted, click on restart.
   
  Once you're back at the office, try to download the system analysis tool and run it: http://support.microsoft.com/kb/947821
   
  Once it's done you can download Service Pack 1 standalone package and try to install it on the computer, you can download service pack 1 from the following link: http://www.microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en
   
  Try to install and check.
   
  After service pack 1 is installed on the computers try to put the computer to normal startup.
  1. click on start, type msconfig in the search box and press ENTER.
  2. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  3. on the general tab, click Normal startup, click ok, and restart the computer.
   
  It may be useful
   
  Kind regards
  Niranjan