Classic report that spans the page loading

Similar Questions

• Hide filter interactive report dynamically after the page load

  Hello
  
  I try to hide the section of interactive report filters (hide/show the area with +/-sign on the top of the report) the loading of the page
  
  I have the reference to the thread after http://apex-at-work.blogspot.com/2011/02/hide-interactive-report-filter.html posted by Tobias Arnhold...
  
  According to the expert, all I have to do is post the following code the code JS "page loading" within a dynamic action...
  
  
  / * Hide filter IRR after page load * /.
  If ($('#apexir_CONTROLS_IMAGE').attr ("src") == ' / i/minus.gif ') {}
  gReport.toggle_controls ($x ('apexir_CONTROL_PANEL_CONTROL'));
  }
  
  I did, but apparently it does not work for me...
  
  I posted a sample on APEX. Oracle.com for review and comment
  
  Thank you
  
  Edited by: qwe12654 may 3, 2011 19:15

  Hello

  01. in the report Footer region put this

  * This will hide your filters, highlight conditions

  02. then Goto 'Report attributes' => 'Search Bar' => for 'Include search bar' select 'no '.
  * This will hide the full search bar (do this only if you want to hide this part)

  * If you get the answer then mark as 'Correct '.

• Help with drop IE the menu that spans the page, Chrome and Firefox work perfectly.

  I've implemented a spry menu in my page.  file:///C:/users/Kim/documents/PQH_xhtml/index.html

  Everything works fine in Chrome and Firefox. But not in IE.  The only problem I have is in IE the dropdown menus stretch out all the way across the page.

  I tried to change the width, but it messes up Chrome and Firefox.  IE just need to shorten the width of submenus.

  Any help is GREATLY appreciated!

  Thank you very much!  This setting in the style rules stopped him drop-down submenus to approach across the entire screen.  I was wondering... is it possible I can get IE to have the same width as the Chrome and Firefox dropdown?  These submenus drop down wonderfully, the same size as the button on the main menu.  I was wondering.  Once again, thank you for your help.

• Possible to display an icon from loading until the page load completely?

  4.2.1

  THM:2

  Hello world

  I have an application with two expensive queries that takes a while to load (on the page sent). On the page there is a selection list filter. When the user changes, the page is sent and two classic run reports based on this filter. I have a dynamic action (load which) goes off on the amendment of the list and then submits the page. However, the loading icon is visible until the moment where that page is submitted. Once the page is sent, then also the reports takes some time to display all of the records. Is there a way to display some sort of an icon of loading time of the page load completely? OR this is not possible.

  Thank you!

  Ryan

  Hi Ryan,

  Please check the old thread with the same question

  PROGRESS BAR WHILE LOADING A PAGE

  Kind regards

  Jitendra

• Initialization of an element on the page loading

  Hi all -
  I have a LOV cascading on a page with a tabular report. The user connects and selects a value in LOV1 which then pushes the values that appear in LOV2. All right.
  
  To meet a new requirement, I changed the SQL query behind LOV1 while for some users a single value is set up by default in LOV1 based on: APP_USER. It works fine, except that because these users no longer need to select a value in the list, return value from the element that animates the second LOV is not be filled. The result is that the second LOV now has no value. I've tested this in just trying to show the item which is defined in LOV1 in the page header (& P15_LANGUAGE) and on the page load it returns null, even if LOV1 indicates the correct display value.
  
  I tried to create dynamic action to the point of loading the page, but it goes right in a loop and continually refreshes the page. I can set up a sample application, but if all goes well, there is a quick solution to this. I searched the Forum but can't find anything that specifically addressed this issue.
  
  Thanks in advance for your suggestions,
  John

  It's the difference between what is happening in the browser vs. database (session state).

  The calculation updates a value in session state for the item page, which can then be used in queries and pl/sql.

  The SQL in the LOV populates the list of selection rendered on the page. This makes SQL refers to this variable binding, that the value exists in the session state.

  So already when opening the page, the select list had values in (browser), and the browser also displays a selected value because there is no option zero. But before sending the page, there is no need to adjust anything in session state - what is ultimately a table in the base of the APEX.
  Calculating forces a value in session state when the lov child makes, there is therefore a value in that variable binding - so record return.

  CAPICHE?

• How to develop all the rows of the table of the tree when the page loads?

  Hi all

  I have tree than VO mere reference of table... I want to expand all table tree rows when the page loads... I already have initially developed property to true... but it only runs from first line of tree...

  Any help would be great-Jey

  In the backbean and that:

    private RowKeySetTreeImpl ps = new RowKeySetTreeImpl(true);
  
    public void setPs(RowKeySetTreeImpl ps)
    {
      this.ps = ps;
    }
  
    public RowKeySetTreeImpl getPs()
    {
      return ps;
    }
  

  In the jspx set table tree as disclosedRowKeys

• Get the values of default table row when the page loads

  Hello

  I am running JDev 11.1.1.7. We have a page that contains two tables in a relationship of the master / detail of nickname. We can do a real master ADF / detail with view items related because the query for the 2nd table is complex and works best when queries with binding settings. The View object for the 2nd table has a request with 2 link params as it can get in the first table. Thus, when a line is selected in the first table we want to execute ExecuteWithParams on the object from view of the table 2. We do it in the Bean managed for the page in a method that is the selection to the first table listener. It works fine except when the page initially loads, the first line is selected by default. When the default value is selected the selection listener is not triggered.

  I've seen the suggestion of not having a line selected by default when the page loads by removing the value selectedRowKeys on the table. However, we do not want that the 1st row of the table secondary master to be selected by default and we as the table of detail to show the correct corresponding lines.

  Steve

  Steve,

  Not really sure when you say that the 2nd table is complex and may not use the master detail. If the settings link in the parent table, you can set the ViewLink accordingly and it should work, right?

  In any case, if you're after the execution of methods on the loading of the page, you will find the links below.

  If it's a working group, you can add a methodCall as activity by default and UTF, you can use phase listener (if listener server does not).

  https://blogs.Oracle.com/aramamoo/entry/an_epic_question_how_to

  Advice from the Oracle Johny: ADF: how to run the ViewObject with a ViewCriteria on the PageLoad in Application Web ADF

  It will be useful.

  See you soon

  AJ

• Display image in a classic report on a public page

  Hello

  I developed a public page where I want the list of items from a view. It must be a classic report because of the template I want to use later.

  The query is executed with the typical HTML structure:

  Select "ARTI_ID."

  "ARTI_BESCHREIBUNG,"

  "ARTI_PREIS,"

  "ARTI_PORTO,"

  decode (nvl (dbms_lob.getlength ("ARTI_BILD"), 0), 0, null,)

  "< img style =" border: 4px solid #CCC; " -moz-border-radius: 4px; -webkit - border-radius: 4px; » '||

  "src =" "| apex_util.get_blob_file_src ('P3_ARTI_BILD', "ARTI_ID") |' "height ="75"width ="75"alt ="Bild"title ="Bild"/ >") "ARTI_BILD" "

  of ' #OWNER # '. " TRAN_ALLE_ARTIKEL_V ".

  WHERE 'ARTI_IST_GUELTIG '=' J '.

  I used this query in an interactive report without problem on a page with authentication. Of course, I edited the page ID in the P3_ARTI_BILD element

  Now, how can I manage it works?

  The application runs on apex.oracle.com over 5 APEX.

  Greetings

  Steven

  He solved. Still don't know what the error was, but everything works fine. This link helped me: Re: Confusion with get_blob_file_src

• Initial request on the Page loading

  Hi all

  I use Jdev 11.1.2.3.  I have a page with a simple table based on a view.  I want that he executed not the query when the page loads.  Now that I've seen many comments on this question and blog of Shay spot on that too, but what I see is the following.  When I have the table on a tab of the Panel with nothing else dressed the steps previously suggested, if the value of itterator #{! adfFacesContext.initialRender} and or affecting the value #{bindings. {LocalDate.inputValue not null}, seem to work splendedly.  But when I put a collection of panels around the table the methods above do not seem to work.  What I lack or y at - it another way I can get cela no query when the page is loaded?

  Thanks in advance for any advice.

  Steve

  #{! adfFacesContext.initialRender} is not very good approach to accomplish your use case, because sometimes is not clear what exactly is 'initial render' (for example, when you have defined a workflow set as region...)

  Instead, you must call YourViewObject.executeEmptyRowSet () before you navigate to the page.

  To learn how to execute the method before loading the page, see this blog: https://blogs.oracle.com/adf/entry/an_epic_question_how_to

  Dario

• Check box in the header of the classic report: select all the report Archives

  Hi friends,

  I use Apex 4.2 worm.

  I've created a classic report and create the check box (apex_item.checkbox (1), EMPNO, 'DISABLED' tick,) in this report.

  My Code

  Select * from)

  Select

  apex_item. CheckBox (1), EMPNO, "DISABLED" tick.

  "EMPNO', 'ENAME', 'JOB', 'MGR', 'HIREDATE',"SAL","COMM","DEPTNO. "

  from EMP)

  where)

  InStr (upper ("ENAME"), upper (nvl (: P6_REPORT_SEARCH, "ENAME"))) > 0 or

  InStr (upper ("JOB"), upper (nvl (: P6_REPORT_SEARCH, "JOB"))) > 0

  ) and

  (nvl(:P6_ENAME,'0') = '0' or ENAME =: P6_ENAME) and

  (nvl(:P6_JOB,'0') = '0' or JOB =: P6_JOB) and

  (nvl(:P6_MANAGER,'0') = '0' or MGR =: P6_MANAGER)

  and

  (nvl(:P6_DEPT_NO,'0') = '0' or DEPTNO =: P6_DEPT_NO)

  I need to create the checkbox in the header of the classic as tabular report where if I click in the header box then all archives should be checked.

  How can I do this with classic report.

  If you want to see this issue in the workspace, then you can use the workspace details below

  Workspace: APEX_ISSUE

  User name: [email protected]

  Password: kaushik1@34

  Page no.: 6

  Thank you

  Hi Maxence,

  The above problem is solved. Please check the same.

  I added the following code in the header of the first column:

  NOTE: I used Carl Backstrom solution for this: Blog of Carl Backstrom: Mini check all HowTo

  But this solution works only when the first column in your report / table is a checkbox.

  If you have more columns rather than the first column where you want to check and uncheck all the features then follow the solution of Jeff Kemp:

  http://jeffkemponoracle.com/2012/11/15/select-all-Unselect-all-checkbox-in-interactive-report-header/

  I hope this helps!

  Kind regards

  Kiran

• Validation of required field only when the page loads (HR test case!) included

  Hi experts,

  
  Here you have a simple test for Jdev 12.1.3 HR case: https://dl.dropboxusercontent.com/u/18609389/TestHR.zip

  The main.jspx is just a button which CreateInsert a record dept displayed in another page:

  

  My problem is the following page (test.jspx) has this code to run when the page loads:

  <af:serverListener type="onloadEvent" method="#{backingBeanScope.backinBean.onPageLoad}"/>
              <af:clientListener method="onLoadClient" type="load"/>
              <af:resource type="javascript">
                function onLoadClient(event) {
                    AdfCustomEvent.queue(event.getSource(), "onloadEvent", 
                    {
                    },
  false);
                    return true;
                }
              </af:resource>
  

  The code is simply this (now):

      public void onPageLoad(ClientEvent clientEvent) {
          logger.severe("HR TEST.....");
      }
  

  And that's the problem, required validation is performed.

  

  Can you tell me why?

  Thank you

  Jose.

  Don't know what is my mistake, but the code is of the actionListener button is not called. :-(

  Well, you combined two different ways to do this (from my first answer).

  If you are still reading this, you will notice "or" before the second suggestion

  Thus,.

  1. keep your clientListener under af:document tag

  2. based on javascript, you find key (use: alert ("button");)  to see if you have referenced correctly your button in findComponentById())

  And then:

  approach 1:

  Use AdfActionEvent.queue (button, true);  queue event on your action button and implement your logic in function attached to the properties of your 'actionListener' or 'action' button (if you don't need listener server in this case)

  approach 2:

  Use AdfCustomEvent.queue (button, "onloadEvent", {}, false);  the queue onloadEvent on your button (in this case you need listener server attached to your button)

  Dario

• JavaScript in "Run when the page loads", works not when paginating the results grid

  I have some Javascript in a page of the Apex, running in "run when the page loads. There is stuff to a grid of results. It works fine on the loading of the page, but then does not work when I paginate (Browse), or sort the grid. I assume that this is because the grid is sorted / paged using Ajax, which means that the page is not fully loaded.

  Is there anywhere else I can put the code, so it is applied to the grid on the kinds and paging?

  Yes you are right when you paginate it doesn't reload the page (at least in this case).

  You must use the event after Refresh in the dynamic actions and run javascript also, you would probably need the dynamic scope

  17.9 implementation of dynamic Actions

• How to set default, or set no.: of lines to display on the table on the page loading...

  Hello
  
  I use JDEV 11.1.2.0.0 and the scenario as follows. I use DeptVO as a read-only table. On the page load needed to display only 5 records and during the click on a navigation button need to display the next set of 5 collection. Please suggest if no default property is available which helps to get the same thing.
  
  Note:
  
  1 used autoHeightRows property but the table is reduced in height to 5 and there is a vertical scroll bar that scrolls to see the next set of lines.
  2 rangeSize to 5 no still no change.
  
  Kind regards
  Olivier G

  Hello
  Check this box
  http://andrejusb.blogspot.in/2011/05/Oracle-ADF-11g-custom-table-pagination.html
  http://smconsultants.in/2011/02/pagination-in-ADF.html

  ~ Abhijit

• PanelTabbed of the ADF. How to choose the default tab when the page loads

  Hi all
  I have a panelTabbed with three showDetailItem component, and I want the first showDetailItem to the tab by default whenever the page loads.
  Currently, the default tab, that's all that the tab that was last visited.
  
  I tried to disclosed attribute set to true on the first tab and false for the other, but it does not work.
  
  Thanks in advance.
  
  Published by: 947142 on July 18, 2012 11:03

  Have a method in the managed bean that is called when the page is loaded and set the tab disclosed.

  Here is a sample based on your use cases:

  PanelTabbed.jspx:

  
  
  xmlns:af = "http://xmlns.oracle.com/adf/faces/rich" >
  
  
  
  
  
  
  
  
  
  
  
  
  

  PanelTabbedBean.java:

  import java.util.List;

  javax.faces.component.UIComponent import;
  Import javax.faces.event.PhaseEvent;

  Import oracle.adf.view.rich.component.rich.layout.RichPanelTabbed;
  Import oracle.adf.view.rich.component.rich.layout.RichShowDetailItem;
  Import oracle.adf.view.rich.context.AdfFacesContext;

  public class PanelTabbedBean {}
  Private RichPanelTabbed myPanelTab;

  public PanelTabbedBean() {}
  }

  {} public void setMyPanelTab (RichPanelTabbed myPanelTab)
  this.myPanelTab = myPanelTab;
  }

  public RichPanelTabbed getMyPanelTab() {}
  Return myPanelTab;
  }

  {} public void onPageLoad (PhaseEvent phaseEvent)
  If (phaseEvent.getPhaseId () .equals (phaseEvent.getPhaseId (). RENDER_RESPONSE)) {}
  If (!.) {AdfFacesContext.getCurrentInstance () .isPostback ())}
  If (this.myPanelTab! = null) {}
  List childUIComponent = this.myPanelTab.getChildren ();
  If (childUIComponent! = null & childUIComponent.size () > 0) {}
  for (int i = 0; i)< childuicomponent.size();="" i++)="">
  If (childUIComponent.get (i) instanceof RichShowDetailItem) {}
  If (i == 0) {}
  ((RichShowDetailItem) childUIComponent.get (i)) .setDisclosed (true);
  } else {}
  ((RichShowDetailItem) childUIComponent.get (i)) .setDisclosed (false);
  }
  }
  }
  }
  }
  }
  }
  }
  }

  Thank you
  Nini

• How to display the activated checkbox in selectManyListbox when the page loads.

  I need to display the box on page ready.
  
  Following code shows a checkbox with the checkbox 'All' as well.
  
  < af:selectManyListbox label = "category of FaQ.
  Binding = "#{backingBeanScope.TestBackingBean.catSelectMany} '"
  ID = "catSelMany" autoSubmit = 'true '.
  required = "true".
  valueChangeListener = "#{backingBeanScope.TestBackingBean.handleSelectedCategoryValue}" >
  < f: selectItems value = "#{backingBeanScope.TestBackingBean.product1List}" id = "catSelItems" / > "
  < / af:selectManyListbox >
  
  On the value change listener, next server, I found that the values are in the table. As the selected values are: [0, 1] like that...
  
  How can I put the value as well as on the page load, I can display a selected check box.

  In the code, I see that you have linked the selectItems list to the value property of selectManyListbox which is incorrect. List of the selectItems must be bound to the value property of f: selectItems and the value property of SelectManyListbox should point to a variable of the list with the getters and setters. If you want to show something is selected by default, you must initialize the list linked to the value property with the values you wanted to show as selected.

  Sample:

  
       
  
  
  // Declare and Initialize product1List with the values 0 and 1 if you want to display product0 and product1 as selected by default
  private List product1List = Arrays.asList(0,1);
  //Add getter and setters for product1List
  

  Jean Lou