Hide filter interactive report dynamically after the page load

Similar Questions

• Classic report that spans the page loading

  THM:2

  4.2.1

  Hi all

  I have two classic reports side by side, based on a somewhat expensive query that returns a number of lines (500) also, we have a box of research and other filters to work on this report. However, the problem is that when the page loads, since the reports run sequentially, the first report on the left side, extends all the way to the right for a few seconds before returning to the right size. I guess this happens because then the second report query (right) runs and pushes the left up. Is there a way to fix the two classic reports width such that it does not stretch on page load?

  Thank you!

  Ryan

  Hi Ryan,

  Ryansun-Oracle wrote:

  THM:2

  4.2.1

  Hi all

  I have two classic reports side by side, based on a somewhat expensive query that returns a number of lines (500) also, we have a box of research and other filters to work on this report. However, the problem is that when the page loads, since the reports run sequentially, the first report on the left side, extends all the way to the right for a few seconds before returning to the right size. I guess this happens because then the second report query (right) runs and pushes the left up. Is there a way to fix the two classic reports width such that it does not stretch on page load?

  Thank you!

  Ryan

  Region change and put css in the attributes of the region to set the size of the region

  style="height:300px;width:500px;"
  

  or you want scrolling of fixed size, if your report has no more. columns fit more in the size

  style="height:300px;width:500px;overflow-y:auto;"
  

  Kind regards

  Jitendra

• How to disable dynamically interactive report filed in the page master detail

  I use APEX 4.0 & very new to APEX. I am not able to disable a class in area of detail (which is an interactive report) of a master detail Page.
  I want to turn off the field in a row based on the value of another field of recording, like set_item_instance_property of the oracle forms. Please help me.

  See {message identifier: = 10743324}

• To maintain the ability to highlight in an interactive report even after the application is closed

  I have an interactive report where in I have an expression that highlights the lines based on a condition.

  Now once I close the application and re open it after awhile. This configuration or the nail button setting is not available or is not there,

  How can I do this all the time.

  I do it this way...

  Action-> highlight-> specs-> expression-> apply

  take action and click Save report entry and if you want to save as principal then select primary or save it as a named report.

  Leave.

• Automatically expand a Hide and Show model region when the Page loads

  Hello
  
  I work with a Hide and Show region model, and I'm trying to accomplish the following:
  
  When my Page loads, if a PX_ID is not null, hide it and see the area should be extended automatically.
  
  I use Apex 4.1.1.
  
  Any ideas?
  
  Thank you
  
  Erick

  Hello Joe,

  Thank you for your response.

  This morning, I was looking for a solution in the forum and I could not find anything. Now, I decided to keep looking for more careful and I found a solution.

  For those interested, check this thead element: Re: hide/show the region

  Basically, I created a dynamic Action with the Code JavaScript: $('.t20RegionHeader') ('img') .children ravishing ();

  Thank you

  Erick

• JavaScript in JSPX and run after the page loads?

  I want to insert some JavaScript to my file jspx, but his does not work... I did this way:
  

  <?xml version='1.0' encoding='UTF-8'?>
  <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
            xmlns:f="http://java.sun.com/jsf/core"
            xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
            xmlns:trh="http://myfaces.apache.org/trinidad/html">
    <jsp:directive.page contentType="text/html;charset=UTF-8"/>
    <f:view locale="#{actionAvailable.userLocale}">
      <af:document id="d1" title="#{bindings.title.inputValue}">    
        <f:loadBundle basename="oracle.bpel.services.workflow.worklist.resources.worklist"
                      var="resources"/>
        <trh:script source="/jsLibs/taskDetails.js" id="s1"></trh:script>
  
      <!-- //I ADDED THIS -->
      <f:facet name="metaContainer">
          <af:group>
              <trh:script>
                 function myFunction()
                 {
                  alert("function called");
                 }
              </trh:script>
          </af:group>
      </f:facet>
      <!-- //END OF SCRIPT -->
  
  
      <!-- //I WANT TO RUN MY FUNCTION AFTER PAGE IS LOADED -->
        <BODY onload="myFunction();">
        <af:form id="f1" usesUpload="true">
          <af:panelGroupLayout layout="vertical" inlineStyle="padding:5px;"
                               id="pgl5">
            <af:panelLabelAndMessage id="id12" label="">
              <af:goLink text="Click here" id="link"
                         destination="#{LinkCreator.link}#{bindings.taskNumber.inputValue}"
                         targetFrame="_self"/>
            </af:panelLabelAndMessage>
          </af:panelGroupLayout>
        </af:form>
        </BODY>
  
  
  
      </af:document>
    </f:view>
  </jsp:root>

  As you can see, I just very simple jspx file and all I want to do is to run myFunction() after loading the page.
  So I inserted a very simple script with 1 function that handles the simple alert (I followed this instructions http://adfcodebits.blogspot.com/2010/03/bit-3-adding-javascript-to-jspx-page.html).
  I also added BODY onLoad, but nothing happens...
  
  What's wrong?
  
  Published by: user1175491 on November 11, 2010 11:55

  Try this:

  
  
  

  function someFunction() {}
  Alert ("OnLoad");
  }
  
  
  

  you don't have to use the body tag

  Published by: Nikhil Gokhale on November 11, 2010 19:18

• link to an interactive report AND apply the filter for 2 items.

  Hi can you help me out here on how to create a link to an interactive report AND apply the filter for 2 items.

  Here is my code

  I have a list of table, clicking the selected item should link to interactive report and create the filter. Below the code does not work for a filter. can you help me what to do with 2 filters.

  A filter = > works very well

  sys. HTP.p ("< ul class =" uChartList"> ');

  sys. HTP.p ("< class li =" uNumber uGrid col_2 col_sart"> ');

  sys. HTP.p ("< a href =" "|") sys. HTF.escape_sc ('f? p ='|: APP_ID |': 0 0 :'||: APP_SESSION |':00:P00_XXX:000, RIR:IREQ_XXX:Test :') |) » » >') ;

  sys. HTP.p ("< class =" uValue"> ' | l_tester |) ("< / big >");

  sys. HTP.p ("< small class =" uLabel"> < /small > Tester ');

  sys. HTP.p ("< /a > '");

  sys. HTP.p ("< /li >" ");

  Scenario 2:

  Two filters = > does not

  sys. HTP.p ("< ul class =" uChartList"> ');

  sys. HTP.p ("< class li =" uNumber uGrid col_2 col_sart"> ');

  sys. HTP.p ("< a href =" "|") sys. HTF.escape_sc ('f? p ='|: APP_ID |': 0 0 :'||: APP_SESSION |':00:P00_XXX:000, RIR:IREQ_XXX:Test:P00_YYY:001:IRC_YYY:test2 :') |) » » >') ;

  sys. HTP.p ("< class =" uValue"> ' | l_tester |) ("< / big >");

  sys. HTP.p ("< small class =" uLabel"> < /small > Tester ');

  sys. HTP.p ("< /a > '");

  sys. HTP.p ("< /li >" ");

  Thanks in advance

  actually the syntax wrong values in the syntax of the passes to several elements.

  is

  f? p = 6000:6004: & APP_SESSION. : NO:6003:MY_ITEM1, MY_ITEM2, MY_ITEM3:1234, 5678

  Use above scenario and verification.

  Go

• Updated interactive report based on shuttle Page

  I am trying to create an interactive report based on the selected items in a shuttle service.  On the page there is a page entitled P2_ITEMS element which is a shuttle service.  It displays a list of items for the user to choose and returns the item_id, the primary key of the main table.  I then an interactive report on the same page that displays data for the item_ids selected in the shuttle.  I use the sql query below in my interactive report, but nothing shows up in my report.  How can I get the interactive report to be updated when items are selected in the shuttle?

  Select

  a.date_loaded,

  b.item_type,

  c.Item,

  a.info

  point a, item_type_lookup b, item_name_lookup c,.

  where instr (': ' |: P251_ITEMS |': ',' :'|| a.item_id |': ') > 0

  and a.item_type_id = b.item_type_id

  and a.item_name_id = c.item_name_id;

  Hello

  Please, install application example sample Dynamic Actions. There are exactly what you are looking for (side Server-online shuttle refresh).

  Kind regards

  Pavel

• update report dynamically? (without page refresh)

  I have a page with several regions, and that a region is visible at a time. Each region contains a report as well as a drop down menu to change the data displayed in the report. Currently, whenever a value drop-down list is changed he submits the page, causing the "main area" to become visible because it is set by default to display first.
  
  Is there a basic tutorial I can follow on how to dynamically upgrade report output without a page refresh?
  
  Thank you
  Steve

  Steve wrote:
  I have a page with several regions, and that a region is visible at a time. Each region contains a report as well as a drop down menu to change the data displayed in the report. Currently, whenever a value drop-down list is changed he submits the page, causing the "main area" to become visible because it is set by default to display first.

  Is there a basic tutorial I can follow on how to dynamically upgrade report output without a page refresh?

  The best way to do this is by using dynamic measurements. Create a dynamic refresh action for each region that runs when the associated select list is changed:
  H4. When

  Event: change
  Selection type: item (s)
  Article (s):
  H4. Real Action

  Action: update
  Fire when the Page loads: Yes or no according to your application requirements
  Region:

  Ensure that the value of the associated selection list is submitted in session before the update state by indicating this in Page items to be submitted in the Source section of the region of report definition.

  There is some action on the Oracle Learning Library tutorials. Specifically refreshment in the abstract, so may not indicate this precisely, but it is an introduction to dynamic actions in general.

  (It's probably possible to create a single dynamic action to manage the updating of all regions: we need the complete details of your application, reproduction preferably it or a simplified on apex.oracle.com.)

• How to change the background color dynamically on the page of the ofa

  How to change the background color dynamically on the page of the ofa

  Hello

  Can you please let me know the dynamic conditions to change the background color?

  Thank you

  Vincent

• Interactive reports will change the order of columns

  Hi all
  
  Have experienced this for the 3rd time now. The other times I just create a new report with the request in the order you wish to fix. But it starts to become annoying now...
  
  When I use the arrows to change the column order on my reports interactive nothing happens when running. The new order is saved and appears that way in design mode, but does not change the order on the report.
  
  Please let me know if you know how to solve this problem, or if Miss me just something really obvious.
  
  Thank you!
  K

  Hey,.

  Changing the order in the attributes report is more an effect, since the default report parameters overwrite it.

  If you want to change the order of the columns, you must go through the menu actions of the interactive report, then choose the column selection menu item, change the order and press ok.

  Then save this order order by default, you go to the action menu again and choose save report option this time, select "primary" or "Save as default" depending on your version of apex (this option is available only if you are connected as a developer in the generator of the apex). Then press the ok button again.

  Other users will only see the changes if they press the reset button on their version of empathy.

  I hope this helps.

• JavaScript: box always invalid after the page

  Hello
  
  In a region, I have a check box that must be disabled by default. After clicking on a button that applies a MRU/present (and verification of certain conditions) the box should switch to on.
  
  What I did:
  -The Javascript of the enableCheckbox() and disableCheckbox() functions are defined in the HTML page header (they work).
  -In the foot of the region with the box I call the function disableCheckbox ('myCheckbox'); to get the default value.
  -The optional URL redirection of the button says:
  JavaScript:doSubmit('SUBMIT'); to submit
  JavaScript:enableCheckbox('myCheckbox'); to activate the checkbox
  
  The problem is that the box will switch on, because submit/reload the page to disable the checkbox through the foot of the region. Think of other solutions, I realized that each top up will set the default again...
  
  How can that be resolved?
  Thanks in advance,
  
  Roger

  Hi Roger,

  You must have somewhere a logic that determines if the checkbox should be disabled/enabled.

  Generally speaking, it would be the value of one or more fields and the box should be checked whenever the field related (s) is / are updated using the onchange event.

  There are several ways to check for this, but the principles would be the same. For example:

  function check()
  {
   var x = document.getElementById("P1_PAGEITEM");
   var c = document.getElementById("P1_CHECKBOX");
   if (x.value == 'XXX')
   {
    c.disabled = false;
   }
   else
   {
    c.disabled = true;
   }
  }
  

  This function can be used on the page loading - by adding a call to it in Footer region region - and the attributes of the P1_PAGEITEM using:

  onchange="javascript:check();"
  

  Andy

• Possible to display an icon from loading until the page load completely?

  4.2.1

  THM:2

  Hello world

  I have an application with two expensive queries that takes a while to load (on the page sent). On the page there is a selection list filter. When the user changes, the page is sent and two classic run reports based on this filter. I have a dynamic action (load which) goes off on the amendment of the list and then submits the page. However, the loading icon is visible until the moment where that page is submitted. Once the page is sent, then also the reports takes some time to display all of the records. Is there a way to display some sort of an icon of loading time of the page load completely? OR this is not possible.

  Thank you!

  Ryan

  Hi Ryan,

  Please check the old thread with the same question

  PROGRESS BAR WHILE LOADING A PAGE

  Kind regards

  Jitendra

• JavaScript in "Run when the page loads", works not when paginating the results grid

  I have some Javascript in a page of the Apex, running in "run when the page loads. There is stuff to a grid of results. It works fine on the loading of the page, but then does not work when I paginate (Browse), or sort the grid. I assume that this is because the grid is sorted / paged using Ajax, which means that the page is not fully loaded.

  Is there anywhere else I can put the code, so it is applied to the grid on the kinds and paging?

  Yes you are right when you paginate it doesn't reload the page (at least in this case).

  You must use the event after Refresh in the dynamic actions and run javascript also, you would probably need the dynamic scope

  17.9 implementation of dynamic Actions

• Initialization of an element on the page loading

  Hi all -
  I have a LOV cascading on a page with a tabular report. The user connects and selects a value in LOV1 which then pushes the values that appear in LOV2. All right.
  
  To meet a new requirement, I changed the SQL query behind LOV1 while for some users a single value is set up by default in LOV1 based on: APP_USER. It works fine, except that because these users no longer need to select a value in the list, return value from the element that animates the second LOV is not be filled. The result is that the second LOV now has no value. I've tested this in just trying to show the item which is defined in LOV1 in the page header (& P15_LANGUAGE) and on the page load it returns null, even if LOV1 indicates the correct display value.
  
  I tried to create dynamic action to the point of loading the page, but it goes right in a loop and continually refreshes the page. I can set up a sample application, but if all goes well, there is a quick solution to this. I searched the Forum but can't find anything that specifically addressed this issue.
  
  Thanks in advance for your suggestions,
  John

  It's the difference between what is happening in the browser vs. database (session state).

  The calculation updates a value in session state for the item page, which can then be used in queries and pl/sql.

  The SQL in the LOV populates the list of selection rendered on the page. This makes SQL refers to this variable binding, that the value exists in the session state.

  So already when opening the page, the select list had values in (browser), and the browser also displays a selected value because there is no option zero. But before sending the page, there is no need to adjust anything in session state - what is ultimately a table in the base of the APEX.
  Calculating forces a value in session state when the lov child makes, there is therefore a value in that variable binding - so record return.

  CAPICHE?