Clean install of Windows Vista

Similar Questions

• Do a clean install of Windows Vista 32 8.1; advice on the new partition formats.

  Hi, I'm going to do my clean install of Windows Vista 32 8.1 today.

  Need advice on the size for my new partition (s).

  Currently defined as the partitions:

  Total: free:

  OS (c                          99.7G          11.9G

  Data (D G 111, 14.5 G)

  HP_Recovery (E 12.0 G 1.97 G)

  I am running:

  Laptop HP Pavilion DV9700 Entertainment

  32 Vista Home Premium, SP1

  Basically I want a suitable partition for the new Windows OS 8.1 (more room for restore points).

  And the rest of the data area, I guess, as if I had originally.

  Does anyone have any other ideas, because I start from scratch.

  Hi davisj-oaktree.

  To remove the Vista partition, I included the following two links http://bit.ly/1dWZLLn, and http://cnet.co/1dWZQii. Please check the information on each of these websites.

  Good luck!

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Dell Studio XPS 435MT disk hard clean install of Windows Vista

  My hard drive died on my Dell Studio XPS 435MT. I'm doing a clean install of Windows Vista 64 bit on my new HARD drive using DVD relocation provided by Dell with the PC.

  (1) I am not able to boot from the CD/DVD player, where is the DVD of resettlement. I have set the priorities of boot and disabled the boot from the HDD. Whenever I try to boot from the CD/DVD drive, I gives me a message saying "no Diagnostic Utility Partition identified; Press a key to reboot... »

  If I unplug the new HD, then, I am able to boot from the CD/DVD player and I can not for the Windows Setup screens. However, I can't then point nine hard disk installation.

  (2) as I said, I am able to start Windows Setup screens when the HD is initially disconnected during startup. After I get to the Windows Setup screen I plug HD on the motherboard. The new HD must be recognized if I do this? Currently it is not.

  (3) following the instructions here, I said I need to 'prepare a USB SATA key in advance.

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/Windows-Vista-installation/

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/downloading-preparing-and-loading-SATA-drivers/

  What drivers to I need? I tried the drivers at this link, but when I try to load them on the Windows installation screen I get a message saying that they can not be found.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=DTT5X&FILEID=2731106696&osCode=WV64&ProductCode=Studio-XPS-435&LanguageCode=en&CategoryID=SA

  Thank you.

  I found this thread on the same subject. Unfortunately your BIOS update can be run from Windows, so that won't help. But down a suggestion to unplug and reconnect the hard drive. Looks like that might work for you.

• Clean install of Windows Vista Edition family

  Due to a Virus, I had to perform a cold install of Windows Vista Edition family.  After completion and activation of the software, I received a message that my product is already in use.  It was a clean install on the same computer that has more than 3 years.

  Hello Steveowe,

  It's normal. To activate it, you use telephone activation. It's free in most countries. See this link from my Web site: http://vistasupport.mvps.org/product_key_already_in_use.htm

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Clean install of Windows Vista 0xE0000100 error code

  original title: 0xE0000100 error code

  I tried to re - install windows vista in order to expand the area of drive c. "0xE0000100 error Code" has poped up and I could not continue with the installation. Please help me.

  Thanks in advance and best regards,

  Hello

  you don't tell on what machine or which disc you're trying to reinstall vista

  Read how to do a clean install

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• After a clean install of Windows Vista Home Premium, how long will it take to run updates and it will take a lot of bandwidth?

  updates after clean install of Vista Home premium

  I plan on upgrading the hard drive on my laptop two year old, which will require a clean install of Vista Home Edition full.  I live in a remote with the satellite internet service.  I would like to know in advance what will happen after the installation with the updates of the program.  I will ask you to install them? It would take a lot of bandwidth?

  Hi EllenCB,

  Welcome to Windows Vista community responses.

  Once you make a clean installation on your hard drive is erased. Now, when you install the operating system return updates that have been deleted will be delivered by Windows update to install on your computer. To save time and bandwidth, you can directly install Service pack 1 and Service pack 2 for Vista which would contain more updates. Of course when you run Windows update and when you try to download from the internet, your download speed will decrease. It is best to keep your system up to date which will allow your version of Windows to run better.

  Before installing the update, run the checksur tool, this tool is running an ad hoc analysis of inconsistencies that might prevent future maintenance operations. Download the tool from the link below.

  http://support.Microsoft.com/kb/947821/

  Please let us know if you need additional assistance.

  Kind regards
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can I use external recovery disk to do clean install of Windows Vista?

  Hello

  The hard drive in my old PC has not totally. I have a CD of the manufacturer of the PC which is labeled

  Windows Vista Edition Home Premium

  External recovery (32-bit)

  (For distribution with a new PC only) .

  I was hoping to buy a new hard drive and use this disc to do a clean install of Vista. Is this possible with this drive?

  Unfortunately, I can't support this constructor because they went bankrupt a few weeks ago, and their website has been taken down.

  Thank you.

  I have now managed to fix the problem and install Vista successfully by, in the BIOS, changing to AHCI to IDE.

  A moderator please mark this post as answer. Thank you.

• Clean install of Windows Vista Home Premium

  I use an OEM version of Windows Vista Edition home premium on an HP Pavilion a1710n. The OS is corrupt and slow as molasses, so I need to do a clean installation. Where should I go?

  Unfortunately, 20 characters on 25 isn't going to work.

  You will need to buy a set of recovery discs, which normally do not need the product key in order to work.

  To order, click on the link below and then click on the link order recovery media.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093 & LC = on & CC = US & DLC = in & sw_lang = & Product = 3340227

• Try to format and do a clean install of Windows Vista on an old my computer HARD drive at home to be placed in a new Tower. The installation does not start.

  Try to format and do a clean install of Vitsa on an old my computer HARD drive at home to be placed in a new Tower. DVD starts up fine and then goes into an endless loop of the repair system that continues to check the c: / drive to find errors. Why is the installation does not start? I know that the folder c: / drive has Vista OS on it from my old compuetr. I want to wipe off immediately and start cleaning up.

  original title: try to install clean vista

  You must set your BIOS to start on the DVD from the beginning to the top.

  You have a good DVD of Vista (OEM/upgrade or full version) and NOT only a recovery disk provided by the manufacturer of the PC (or you burn you).

  For a DVD upgrade, follow the method here and make sure you format your HARD drive thanks to the tools of "advanced install" on the DVD.

  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  If you have a full version of Vista rather than a version upgrade then just do the first part of the above procedure.

• Windows 8 clean install on Windows Vista

  Well at first I tried to install Windows 8 However he says that this is impossible because the O. S I had was not compatible

  Well I then tried to burn a DVD on my Windows 7 computer and tried to get the installation file that is installed on the same

  Then, I now try to run the same disk on my Vista computer

  I just wanted to confirm what else I need to do in the BIOS menu

  ("If possible can you guys include a screenshot with")

  Thank you

  First, you must set your BIOS to boot from the DVD:

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Boot from the DVD Windows 8
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 8 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• (64-bit capable) 32 bit Vista Home Premium... I can do a clean install of Windows 7 64-bit professional?

  (64-bit capable) 32 bit Vista Home Premium... I can do a clean install of Windows 7 64-bit professional?... from a flash drive?... to change the boot order?... or at all?

  Hello

  That's right; with Vista Home Premiun upgrade paths are for Windows 7 Home Premium or Ultimate.

  It is one of the reasons why you should do a clean install.

  The other reason is that you can NOT put 32-bit to 64-bit.

  You need a clean install to do.

  Follow these steps before you install or buy Windows 7:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  _________________________________________

  And it's a way to do the clean install of Windows 7 DVD forn and Flash Player

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Using the USB method:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  See you soon

• What drivers to download for a clean install of Windows 7?

  I'm working on a clean install of Windows 7 Enterprise SP1 on my HP Pavilion computer of bureau a6600f (originally there was Vista, now he has Windows 7 Ultimate). The machine is stable but really slow.

  If I want to download the drivers and others, which is here. But I don't really know what are those who... just do each of them?

  and then after installing Windows 7, I have just install these one by one?

  Here are the specifications of your desktop HP Pavilion a6600f. Based on the specifications, this model uses a nVidia Chipset nVidia Graphics, nVidia Network and Realtek HD Audio. If you have already done, I would update the BIOS first. I skip the installation of the HP drivers and go directly to the sites of the manufacturer for the latest drivers chipset.

  nForce Driver v15.56 for Windows 7 64-bit (Ethernet, SATA/IDE, SMBUS, pilot EMS and Away Mode driver)

  V307.83 GeForce Driver for Windows 7 64 bit (Graph)

  Realtek HD Audio Driver for Windows (Tick 'Accept', click 'Next', years download location for 3rd item to the bottom of the list)

  I think that your 'slowness' is due to the entry level Pentium E2200 CPU and only 3 GB of RAM. Consider one of the better microprocessors on the list and the upgrade to 4 GB RAM HP.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Clean install of Windows 8 and Windows 7

  How do a clean install of windows 8 on a 7 hp windows computer. and how can you do a system recovery

  without having to install all other unwanted. Just the Windows 8 or Windows 7 works.

  It seems like HP won't install us just the OS.

  answer please.

  I'm glad you found it useful.

  Pre-ignition works for Windows 8, but it is slightly different. In Vista and 7, all of the computers Dell with Windows 7 Edition home premium for example turned on and had the same product key. They also come with Windows 7 modes of action that had a unique product key (the key of SLP). I also think that a Dell DVD could not be used on a HP and vice versa. Modes of action were of poor quality and prone to fading. In Windows 8, there is a unique product key into the system BIOS that supports the DVD (or MSDN/Technet .iso) starts from the BIOS. I suppose a Dell DVD could be used on a HP and vice versa, but I don't have a system with Windows 8 to run some tests on.

  P.S. Can you please not directly to the pdf file because I'm updating regularly the complete pdf - it will probably be an old revision when I update in a few days:

  http://philipyip.WordPress.com/Dell-community-forums/

• How do I re - install my window (vista Home premium 64-bit)

  When I bought my laptop, it had an original window but my hard office was damaged and I had to change, change the computer store but they put non-original window as they said my recovery CD THAT is also damaged, I need to download my original window I have the serial number

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.