Clean installed and active Windows 8 signed me off every 10 Minutes guest "you are about to be signed within 30 seconds.

Similar Questions

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Can I sell my windows 7 home basic to others that I have installed and activated?

  I bought windows 7 Home Basic SP. 1. I sell my windows 7 home basic to others that I have installed and activated?

  I want to buy the new windows and I used the update because I want a simple process. The upgrade procedure needs more, not simple.

  Can the buyer install it and activate it to his computer?

  You say you have this:

  "Home Basic 7 Sp 1 64-Bit English 1PK DSP OEI DVD 611 SEA"

  Did you read this part?

  These versions are for small integrators (DSP = 'partners in enforcement service'), which usually contain a single Windows (1pk = 32-bit or 64-bit, not both as in commercial versions) and an OEM preinstallation kit to preconfigure Windows and/or integrate additional tools (OEI = 'Installation of Original equipment' or 'Integration organizational environment'). They have the same limitations that versions OEM = license is tied to the computer where the operating system has been installed initially and not transferable in case of death of the machine.

  If you want to move or to sell the license of operating system or upgrade motherboards in a computer, buy a license at retail in the future.

  See you soon.

• my laptop displays windows is installed and activated but when I go to use powerpoint, he asks a validation of key that when I get home he tells me is not valid

  my laptop displays windows is installed and activated but when I go to use powerpoint, he asks a validation of key that when I get home he tells me is not valid

  Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010.

  If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  Full license:

  http://support.Microsoft.com/kb/823570

  Get the key;

  http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

  http://support.Microsoft.com/kb/2002262

  Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs

  http://support.Microsoft.com/kb/927921

  Error message when you start an Office application after installing a suite Office: "invalid product key".

  http://support.Microsoft.com/kb/836178

  If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

  Run the patch tool mentioned in the article below to uninstall Office 2010:

  http://support.Microsoft.com/kb/290301

  Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

• Windws 7 'clean install' and not 'upgrade '.

  Hi, I'm marco. I bought a Toshiba A350-12j in October. Then, I bought windows 7 upgrade DVD. Now... I received two DVDs: DVD UPGRADE TOSHIBA and WINDOWS 7 HOME PREMIUM UPGRADE DVD and a small user guide.

  * Now, I would like to know if there is a way to do a clean install * and not an upgrade. I mean, regardless of if I'm going to lost all my data on the hard drive, but I prefer to format and install the operating system. What I want to know is what I have to do with the upgrade dvd toshiba, I think that I need because of drivers, but how to use it? Just insert the windows 7 dvd, and then format and install the operating system... and when the operating system is installed... Insert the toshiba upgrade dvd and install the driver. It will work this way?

  Thank you.

  Hey maicasajusta

  And now? your Win7 is activated? How do you activate it?

• I have a win 7 dvd retail and I did clean install and says now I can't activate

  I have a win 7 dvd retail and I did clean install and says now I can not activate because I only have a dvd upgrade how do I clean win 7 off the coast to put xp on and do it all again

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• Win 7 was just installed and activated.

  My computer shuts down on me whenever I do not use it for a little bit. This problem just started. I have windows 7 installed and activated, it about a week and a half ago. Now its telling me I need to save files, and get another copy of Windows 7. What is going on?

  Windows Update has nothing to do with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• List of open and active/Windows Forms displayed within Windows XP 7 v/s windows on the right by clicking on the name of the application in the status bar

  Salvation OR,.

  We found that the list of forms/open windows displayed in Windows XP (on the right by clicking on the name of the application in the windows taskbar) seems to indicate all open and active windows/forms in the application.

  We would like to know how to enable the same functionality in a Windows 7 environment. The best we can do now is to double click on the name of the application on the windows taskbar to switch between active windows/Forms in the application. We would like a menu similar to the windows XP appearance about running on Windows 7 when it comes to this particular feature.

  Thank you and best regards,

  -Ashish

  The taskbard has changed significantly in Windows Vista and 7. You can get a similar functionality to what you call by customizing the taskbar in the taskbar properties. In addition, now press SHIFT key while right-clicking to display a menu similar to what you show in your screenshot, except that it does not display the name of the element. In Windows 7, the feature make you is typically done by hovering over the icon in the bar tasks and selecting one of the points of view which appears above the element.

  You can use the Windows shellapi to do a limited customization of the task bar, but this API is very difficult to use and I would not recommend this approach.

  CVI provides a method to change the name of the item in the taskbar (see this KB), but it does not add the name after the restoration in the context menu.

• How to install and run windows on my macbookair?

  How to install and run windows on my macbookair?

  Hello

  I suggest you to follow the links and check out them.

  http://www.Apple.com/support/Bootcamp/

  http://support.Apple.com/kb/HT3986

  http://support.Apple.com/kb/HT1899

  Boot Camp Installation & Setup Guide

  http://manuals.info.Apple.com/en/Boot_Camp_Install-Setup_10.6.PDF

• is it possible to install and operate windows edition to 7 Home premium with only 960 MB of ram on a Dell Inspiron 531 s?

  Is it possible to install and operate windows edition to 7 Home premium with only 960 MB of ram on a Dell Inspiron 531 s?

  Aries is perhaps not the biggest problem.  WIn7 needs 256 MB of ram to run aero. You can run it in basic, but with 960 ram it will be slow.  If you use it just for browsing and e-mail, it might be tolerable.

• What will happen with my agent and active Windows 8, I will have bought with the laptop after I swap HDD with SSD?

  Original title: replacement disk and windows.

  Hello guys.

  I am considering buying a new laptop. The model that I found and I like has a HARD drive if I want to replace it with the SSD to the format of my previous laptop. (Due to the low energy consumption, greater speed, etc.). So I have a 256 gb SSD in my previous loan of laptop replace new one HARD disk, yet what will happen with my agent and active Windows 8, I will have bought with the laptop?

  I can reinstall windows 8 on the SSD, but I don't have a key to activate their... How will I be able to get the key from previous series if the laptops will only work with a recovery partition these days here? I asked a guy in the store, I buy my laptop since and he told me that he does not know and I have to ask for help. However, to create a message of support I need a serial number of the model I did not because I have not yet bought a laptop, so I don't know what to do... I really don't want to stick with the HARD drive, but also I can't afford another model.

  Is it possible to do a recovery with my laptop disk when I get it, then replace the drive with my SSD and run the recovery disc I made?

  The laptop I want to buy is an Asus if that helps...

  Thanks in advance...

  The 'Raw' State is not necessary, it is the State of any drive (SSD drive or hard drive) would be in if you just remove a disk new in box and will need to be "initialized", since you have already used the player already initialized sound.

  Do not format the drive, rather than delete all existing partitions, (the SSD shows then as being "unallocated"). Now you are ready to restore the backup Image you created. During the restore process Acronis will recreate the partitions that were on the hard drive on your SSD.

  J W Stuart: http://www.pagestart.com

• Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop

  Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop immediately.

  Repetition and crashes again. Help it does not start!

  Solved! Tried everything in support documents and none of it worked. Frustration massive Adobe Chat staff who knows nothing and just told me to look at the documents of support again and again. They also gave me a phone number in Australia which has a recorde d message saying that the product is not supported! What is everything?

  Finally Adobe technical support Anand called me (from when I have opened the original case of support which gave me the serial number).

  Just had to rename the file SLCache in c:\program (x 86) and again the EULA and reactive. Now everything works fine. Way to hard.

• I can't install the new application on my iphone 5s revel.  I tried to install the update, and that did not work.  I deleted my app and rebooted my phone and tried a clean install and that no longer works... Help!

  I can't install the new application on my iphone 5s revel.  I tried to install the update, and that did not work.  I deleted my app and rebooted my phone and tried a clean install and that no longer works... Help!

  Please see the post below updates on the issue of the revel facilities:

  Problem installing Adobe Revel 2.3.2

• Windows file extension keeps opening every 2 minutes?

  Windows leader continues expansion opening every 2 minutes, I have like 8 windows open automatically, how do I stop?

  Hi JoeyMashike,

  (1) what is you receive the exact error message?

  (2) since when are you facing this problem?

  (3) remember to make changes?

  
   

  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

  I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

  Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

  diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

  Once thru, L.click the disk, go to actions, all, select 'enable '.

  In addition, live windows for vista is microsoft discontinud