Cleaning of a 1080 p PrecisionHDMC

Similar Questions

• PrecisionHDMC 1080 p camera and C40

  I've been through a few web links and thought, that I would come here to see if I can get further assistance

  I have PrecisionHDMC 1080 p camera that connected to C40

  in CUCM 10.5 environment

  Currently, only not using the motorway

  Do not use the SIP URI

  Is it possible to use the camera 1080 p PrecisionHDMC as a stand-alone camera connected to a PC?

  Is it possible to use the 1080 p PrecisionHDMC and C40 camera to attend a webex meeting?

  If the person accepts the WebEx meeting using WebEx Meeting Center and CMR Cloud, that Yes, you can participate with the C40, you'd simply dial a SIP from the C40 in the WebEx meeting.

  It is not possible to use just the PrecisionHDMC camera or any device at one end of the telepresence to be used a PC camera.  However, there is a workaround where you could get the video from the camera, but you would have to buy and use third-party devices.  This has been discussed many times here on this thread on the forums: help-codec-camera-webcam.

• Daisy chaining for 2 PrecisionHDMC 720 p cammera with 1 PrecisionHDMC 1080 p, with the codec C90

  Hello

  Is it possible to daisy chaining for 3 cammeras having different resolutions, with the codec C90?

  2 PrecisionHDMC 720 p cammera with 1 PrecisionHDMC 1080 p, with the codec C90

  Thank you very much!!

  Hi Moreno,

  Control of the camera uses the visca Protocol, it is same in both cameras.

  I tested previously and she works in the laboratory.

  Kind regards

  Dharmmesh

• CISCO SX80 - PrecisionHDMC 1080 p 12 X CAMERA

  Hello

  I want to know if the camera precision HD 1080 p 12 x is compatible with the Codec SX80.

  Thank you

  Ivan

  SX80 does not support Cisco TelePresence precision HD 1080 p 12 x.

  It supports

  Precision 60

  Cisco TelePresence precision HD 1080 p 4 x S2

  SpeakerTrack (with an accuracy of two 60´s)

  / Magnus

• Mac Mini 2010 with 8 GB slow with 1080 p videos

  Hello there time stretching from the memory of a Mac Mini 2 GB to 8 GB 2010.
  And watch videos in 1080 p Youtube to stop me... and he is not fluid.
  720 p does not reach me.

  I created this video. With activity from 720 p to 1080 p and monitor changes.
  https://youtu.be/66DkdXdUKr0

  Why cross the 1080 p videos? Can't? It is 60 fps.
  I don't have any SSD. I have the 320 GB 5400 RPM mechanical plant
  Before I only had 2 GB of RAM.
  Yosemite I have very clean... and the Internet connection is good... with the other laptop i7 I move the screen and this monitor in 1080 p at a time.

  What I remember:
  http://www.pccomponentes.com/g_skill_so_dimm_ddr3_1066_pc3_8500_8gb_2x4gb_cl7_pa ra_mac.html
  The monitor:
  LG 24MP77HM-P - IPS LED monitor 24 "(16:9, résolution 1920 x 1080, écran de cinéma)"
  http://www.Amazon.es/DP/B00RXK2NQO
  Video. :
  https://www.YouTube.com/watch?v=anrvBD4aTGY

  Concerning

  Limit Activity Monitor, it seems that the CPU or memory.

  Do you see not all submission difference if full screen or normal window?

  If no real difference which would indicate that the GPU is the bottleneck since the two would read the HD at the same rate.

• Importing video to 2.7 K for a project of 1080; Not good quality

  I'm on FCP 10.1.4.   Mounting on a MBP running OS 10.9.5 15 ".

  I imported a few beautiful images of GoPro 2.7 K 60 fps (59,94 p).   When I play it in the Viewer on the upper right of the screen, it looks great.   Strong, bright color, smooth.

  I created a project of 30 fps (29.97 p) 1080.   I intend to export to this resolution that I find he dribbles well and seems very well on most of the big and small screens.  However...

  If I take a video from the browser and drag it to my project, the quality is seriously degraded.  When I play now the same clip of the project rather than the browser, now it is very soft, the colors are not as nice.  It just looks like another shit GoPro video and not the high quality that looks outside the project.

  I did not export it again, but the experience passed, my export to compressor bring the fidelity of the original.

  I am aware that I am down the video resolution and frame rate, however, I've seen a few videos 1080 and 720 even very crunchy, so I don't know why this happens.  I thought that if I gave the CPF in addition that he needs, he could extract something nice.

  Can I trust that compressor will clean as much as possible?

  Should move on to a project which is 2K or 60 frames per second (to match the max resolution of the image collection that I have.)?

  I don't know some of my images is only 720 p.

  Is there a setting of FCP to have spend more time has translated the video of the native resolution of the resolution of the project?

  Thanks for any help.  This poisoning me for awhile.  Web searches raise obvious answers to this question, so I was hoping someone here could help me.

  Encrassante the Viewer to a higher quality and make the project. Generally, I think, unless you intend to use the extra size to crop, most users edit in the original size and create a master of the size before the revision downward on export.

• Possible hard drive after clean install failure

  Appreciate it really all thoughts on this issue, because it drives me crazy and apparently get worse...

  I added 8 GB of RAM and an SSD Samsung 840 PRO in a Mac mini in 2011 about three years ago. At the time, the Fusion drive has just been introduced, and I found the online instructions to configure the combo HD SSD/existing as a Fusion player. After ironing out a few bugs, it worked perfectly (at least from the point of view of the user) for nearly three years. Significant speed increase, could handle more intensive applications of multiple users, etc.

  Three weeks ago, I decided to do a clean install. I wanted to get rid of all accumulated waste, as well as some of the Notification Center widgets don't work properly. Immediately I noticed the startup time is longer, but once connected, all seemed well. Just moved old files to the new system from a Time Machine backup, and everything worked well. In disk utility, it looked as if the OS has created two discs as a Fusion player, so I left as what.

  A week ago, I started notice stuttering in the downloaded movies in iTunes, which never happened before. Around the same time I started having the spinning beachball while running almost nothing: Safari with less than 10 tabs open (no video game), iTunes (inactive), Mail, etc... Impose anything. I performed first aid in disk utility and found no problem. I kept the activity monitor for the last 24 hours with nothing significant, other apps does not not showing the spinning ball.

  I saw someone else evoke here EtreCheck, so I did that and got two red warnings:

  Macintosh HD (2) /: 621,05 go-go (295,75 free) - 31 errors

  Drive failure!

  This error arose in both sections of the HD, as shown below:

  EtreCheck version: 2.9.11 (264)

  Report generated 2016-04-24 07:15:16

  Download EtreCheck from https://etrecheck.com

  Time 02:41

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Beachballing

  Description:

  Recently a clean installed on a system having and sad aftermarket, now without constantly slowing, beachball, movies stutter, etc.

  Hardware Information: ⓘ

  Mac mini (mid-2011)

  [Data sheet] - [User Guide] - [warranty & Service]

  Mini Mac - model: Macmini5, 1

  1 2.3 GHz Intel Core i5 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  Intel HD Graphics 3000

  DELL S2440L 1920 x 1080

  Software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since the start-up time: 13 hours

  Disc information: ⓘ

  SAMSUNG SSD 840 PRO series disk0: (128,04 GB) (Solid State - TRIM: No.)

  EFI (disk0s1) < not mounted >: 210 MB

  Boot OS X (disk0s3) < not mounted >: 134 MB

  Macintosh HD (2) /: 621,05 go-go (295,75 free) - 31 errors

  Drive failure!

  Storage of carrots: disk0s2 127.69 GB Online

  Storage of carrots: disk1s2 499.25 Go online

  Hitachi HTS545050B9A302 disk1: (500,11 GB) (rotation)

  EFI (disk1s1) < not mounted >: 210 MB

  Recovery HD (disk1s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (2) /: 621,05 go-go (295,75 free) - 31 errors

  Drive failure!

  Storage of carrots: disk0s2 127.69 GB Online

  Storage of carrots: disk1s2 499.25 Go online

  USB information: ⓘ

  Western Digital My Passport 0748 1 TB

  EFI (disk3s1) < not mounted >: 210 MB

  Backup HD (disk3s2) backup Volumes/HD: 959,83 go-go (207,03 free)

  Computer, Inc. Apple IR receiver.

  MediaTek Inc. MT1887

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 152 tasks Apple

  [operation] 78 tasks Apple

  Launch system demons: ⓘ

  [loaded] 45 tasks Apple

  [loading] 156 tasks Apple

  [operation] 87 tasks Apple

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-04-15) [Support]

  Items in user login: ⓘ

  Dropbox application (/ Applications/Dropbox.app)

  Other applications: ⓘ

  [ongoing] com.getdropbox.dropbox.259552

  [loading] 393 tasks Apple

  [operation] 189 tasks Apple

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-21) [Support]

  QuickTime Plugin: 7.7.3 (2016-03-12)

  Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-21) [Support]

  Default browser: 601 - SDK 10.11 (2016-03-12)

  3rd party preference panes: ⓘ

  Flash Player (2016-04-15) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 621,05 GB disc used: 325,30 GB

  Destinations:

  My passport [Local]

  Total size: 959,83 GB

  Total number of backups: 32

  An older backup: 17 09/15, 01:57

  Last backup: 24/04/16, 07:00

  Backup disk size: too small

  959,83 GB backup size < (disc 325,30 GB X 3)

  Top of page process CPU: ⓘ

  3% WindowServer

  kernel_task 2%

  1% fontd

  0% askpermissiond

  Top of page process of memory: ⓘ

  1.45 GB com.apple.WebKit.WebContent (7)

  608 MB kernel_task

  Softwareupdated 475 MB

  ITunes 369 MB

  270 MB QuickTime Player

  Virtual memory information: ⓘ

  80 MB of free RAM

  used 7.92 GB RAM (1.98 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  April 23, 2016, 20:52:25 ~/Library/Logs/DiagnosticReports/com.apple.appkit.xpc.openAndSavePanelService_2 016-04-23-205225_ .crash [deleted]

  System/Library/Frameworks/AppKit.Framework/versions/C/XPCServices/com. Apple.AP pkit.xpc.openAndSavePanelService.xpc/Contents/MacOS/com.apple.appkit.xpc.openAnd SavePanelService

  April 23, 2016, 17:23 self test - passed

  April 21, 2016, 18:34:49 ~/Library/Logs/DiagnosticReports/Dropbox_2016-04-21-183449_[redacted].crash

  /Applications/dropbox.app/Contents/MacOS/dropbox

  I guess at this point that OS X put in place the incorrect Fusion drive, causing conflicts... But I don't know what to do about this. I have several backups, so this isn't a problem.

  This community is a great resource, thank you to everyone who adds. As I said, I'd like to advice for this...

  I think it is obvious that you have a disk failure. Could be the SSD, HD, or both.

• Camileo S20 - HD 1080 p or not

  I recently bought a Camileo S20 under the impression that it would record on 1080 p. It would be nice for my shorts. However my shots look like anything some of the shots online, I saw that were crisp clean and not grainy.

  Every time I have pictures or take photos (in natural and good lighting), it is very grainy.
  Theres nothing in the manual and to be honest, I'm very disappointed... I'm doing something wrong?

  Don't think you did anything wrong... The Camileo S20 supports 1080 p, as shown here:
  http://www.Toshiba-multimedia.com/EU/Camileo-camcorders/S20/

  In addition, I found this Toshiba document + why don't I have a "fuzzy picture" on my camera, Camileo? +
  http://APS2.toshiba-tro.de/KB0/OPT0602Y40000R01.htm

• Lenovo T560 with an external monitor 2560 x 1080

  I just got a new T560 with Intel graphics HD520 and a 40A20170US docking station. When you try to use my 25UM LG monitor (which has a native resolution of 2560 x 1080), this resolution is not listed in the drop box available in the settings of Windows resolutions. I tried a dual link DVI cable and a DVI - DP cable from the dock and a mini-DP-HDMI cable from the port of the laptop. I used the Intel HD graphics control panel to put in a custom resolution of the 2560x1080x60hz, but the utility gives an error "greater available bandwidth. 2560x1080x30hz is functional, but choppy and annoying and unacceptable, because I specifically asked Lenovo sales if this combination would support my monitor.

  It is a clean installation of the company to win 10, with the latest video drivers and chipset installed.

  Did I miss a tweak here?

  Given the special format 21:9 for the external monitor LG25UM, think that genius suggests using DisplayPort to DisplayPort system or the dock to get supported by Lenovo 2560 x 1080 60 Hz.

  DP is your best option because the graphics card Intel only has the ability to support the HDMI to 2560 x 1080 30 Hz when he can't stand not Dual channel DVI at all, so Lenovo does not support DVI 2560 x 1080 30 / 60 Hz.

  Thank you

• Why my EOS 60 1080 30 fps video freeze and stall when changed in Final Cut Po?

  When editing from my EOS 60 1080 30 fps video on Final heart Pro 7.3 a stop on unwanted image appears at the end of each clip. The video is also difficult to play, often stalling after each change. Generally video is really the struggle against the program, even cleaning. I tried different Final Cut of the Codex and retired the Elgato Turbo video but the problem remains. Of course, there is some sort of sync problem, but I can't find or understand why it is there.

  Thank you

  Clark

  Here: http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_60d#DriversAndSoftware

  Go to the driver & software, choose your version of MAC OS, choose software, download: EOS MOVIE Plugin-E1 for Final Cut Pro 1.4

  It has the manual inside I think. But you can install it, restart your final cut pro and edit your movie. See if it solves your problem. Let us know.

  PS: Here is the Asia of Canon's Quick Start Guide: http://gdlp01.c-wss.com/gds/7/0300004927/03/finalcutpro-plugin-e1-14-e-en.pdf

  Good luck.

• 1080 MicroSoft Life Cam questions?

  Bought a MicroSoft Life Cam Webcam 1080

  In the middle of uploading software cd, I get an error message

  www.support.Microsoft.com/kb/953691

  I am running Windows Vista.  Have all tried to free disk space, change the Windows Installer to automatic.

  Running Windows XP at work and the upload works fine.

  Help!  Help!

  Knight Fan Stan

  Hi Knight Fan Stan

  What is you receive the exact error message?

  Method 1 :  Clean boot the computer and then try to install the webcam

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Method 2: You can see the steps outlined in the article below, which deals with a similar question

  Resolve the error "Setup cannot continue" when you install the LifeCam software

  http://support.Microsoft.com/kb/973297

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Projector DLP of BenQ SP890 1080 p display no photo and freezer the mouse and keypad

  Original title: DLP of BenQ SP890 1080 p projector

  Connecting to Dell LAtitude series (E5510 and at least two others in this series), no image, even after adjustment of the ratio of the projector image and the resolution on the computer. On a single unit, I could bring to the top of the image, but the mouse and the button freeze after a few seconds.

  Hello

  The DLP of BenQ SP890 1080 p projector is compatible with Windows 7, it is probably not a problem with the drivers, so you can see the link provided below for more information.

  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=BenQ%20SP890%201080P%20DLP%20Projector&v=BenQ&uid=SP890&l=en-US&pf=3&pi=5&c=Displays&sc=Projectors&os=32-bit

  You can try to connect the projector to another computer and check if the problem persists.

  Resolution:

  I recommend to start the computer in a clean boot state and then try to connect the projector to the computer.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• No video output of camera x 12 PrecisionHDMC on SX20

  Hi all

  Behave in my telepresence SX20 system just started to hurt. There is no video output of the camera (PrecisionHDMC 1080 p 12 X)

  At first I thought it was a configuration problem, so I did a factory reset. However, no video.

  The system has been installed in 2012 and worked well since then.

  Does anyone have suggestions on what could be the problem?

  XStatus camera
  * the camera 1 s: true
  * s camera 1 HardwareID: "50000000.
  * 1s camera manufacturer: "TANDBERG".
  * 1s camera model: "PrecisionHDMC 1080 p 12 X.
  * s camera 1 ID of the software: "S01718 - 4.0FINAL [ID:40080] 2012-08-13.
  * SerialNumber 1s camera: "A1AB48E00444."
  * s camera 1 IpAddress:
  * s camera 1 MacAddress:
  * s camera Position Pan 1: 400
  * s camera 1 Position Tilt: 210
  * s camera Position Zoom 1: 6
  * s camera 1 post Focus: 4576
  * s camera 1 capacity Options: 'ptzf '.
  * s 1 Flip camera: 'Stop'
  * end

  What is the status of the input HDMI 1, and what happens if you connect HDMI the camera directly to a TV?

• 1920 x 1080 display does not offer option 1366 x 768

  I just got my Pavilion dv6t-7000 Select Edition Entertainment Notebook, and I am satisfied with everything except the display options.  I hesitated to cross the screen 1366 x 768 to 1920 x 1080 because of the tiny text and my vision perfect at least, but I did anyway.  I assumed that I could change the 1366 x 768 resolution for once that I need larger text. After all, I can do on the my Office HDTV and monitor 1920 x 1080.

  But I can't find any option for the resolution; not in 4000 integrated Intel video options, in the video of Nvidia GT 650 m options, nor in Windows screen resolution options.  All that is available are 3 very low resolution 4:3 resolutions.  Can someone tell me please how to activate the 1366 x 768 resolution?

  I usually wait for the mods to approve the screenshot, but try this.

  Go to the NVIDIA view and use the driver for your card here. (if you need assistance after yet, but you seem more literate computer then most)

  Save it on the desktop and install it from there, not in a temporary folder.

  When you install it, you will have the possibility to choose advanced options, what to choose and do a clean install of the driver.

  Also, look for options on how to activate the Advanced menu, even if you install it or when you initially open the NVIDIA control panel for the first time.

  It's _ important make sure when ever you try and install a driver from another person and create a manual restore point Windows.

  I also think that the options in the NVIDIA Control Panel are not always there as you have switchable graphics, but I don't see why that should make a difference.

  I'm going to watch a movie, I'll check later.

• After a clean install of Windows 8, I can't get three monitors to work

  I did a clean install of Windows 8 pro.  I have a Dell T1500 with over-pants V4800 graphics.  This machine previously had Windows 7 installed and works with the ATI driver.  With Windows 7, the three monitors worked without problem.  Now, with Windows 8 installed I can't get two monitors to work.  I use the more updated driver for Windows 8 for the map on the website of AMD.  The third monitor can be seen on the page of the screen resolution, but I cannot "extend desktop...". "the third arch.  When I try to do so it gives me a message saying

  "The display settings could not be saved.  Please try another combination of display settings. »

  All three monitors are the same, Dell P2210.  I tried different resolutions. I tried the driver I was using on Windows 7, I uninstalled the driver and adapter repeatedly.  I installed all the drivers from AMD with the extras (hydravision, etc.).  I used just the default Windows drivers. I have change the placement of the monitors on the video card, but few matter where I plug them in, only two works.  All monitors are operational.  I even tried different monitors.  All this with no result.  I tried to use the Catalyst Control Center.  He sees the third monitor but just shows it as being disabled with no way to enable that I see from in the Catalyst Control Center.

  It is the last obstacle for me to fully use this machine to Windows 8.  I'm puzzled.  I have read many other forums.  I've heard of this problem with Windows 7 as well so I don't know that it's specific to 8 but could very well be.  Yet once I had Windows 7 with three monitors with the same card.  Contribution to this issue would be greatly appreciated.

  I had this problem on a Lenovo three installation of the monitor using the integrated display laptop, a monitor outside the mini HDMI and a third follow out of the HDMI Port among Replicator.

  In the end, it's a simple solution.  When you go to display settings, all three monitors not reimbursed up to 1920 x 1080 and configuration could never be saved - however the 3rd monitor only supported by 1680 x 1050, which is the resolution (recommended).  After changing the 3rd monitor for the resolution recommended, I was able to save the configuration to display > screen without problem resolution.

  I don't know why the resolution not supported has been set default to-after selecting the right pair, there is now no option to go to the highest resolution not supported on this screen.