Clear data

Similar Questions

• Android: List of folio of length zero returned after tapping 'clear data '.

  Hello

  I'm having a problem where if a user clicks 'Clear data' in their application settings for an Android of DPS application that has a custom library, the app is no longer will charge folios at the later opening of the application, even when the application is uninstalled and reinstalled. The only way I could fix it was to build the same application without a custom library, the application load, and then re - build applications with the library.

  Here are the listed steps to reproduce:

  1. Create an application with a custom library
  2. Construction contract & sign
  3. Install this application for device
  4. Delete the application data (the exact steps may vary)
     1. Go to 'Settings' application
     2. Press 'Manage Applications'
     3. Tap the name of the application that you created
     4. Click 'clear data '.
  5. Application of re - open
  6. Observe that no folios are served.
     1. adobeDPS.libraryService.folioMap is an empty object, which is normally where the folio data are stored.

  The app seems to dwell in this corrupt State even through soft re - installs and uninstalls and reinstalls.

  To restore data, this procedure worked for me:

  1. Change the earlier application
  2. Remove a custom application library
  3. Construction contract & sign
  4. Install the device app
  5. Observe that the native library of the DPS now has the content in folio
  6. Change the earlier application
  7. Restore custom from initial steps above library
  8. Construction contract & sign
  9. Install the device app
  10. Observe that the library now has data expected folio
      1. adobeDPS.libraryService.folioMap is filled with the expected data.

  This problem has occurred on the Nexus 7 and Samsung Galaxy Note 10.1.

  I would greatly appreciate any advice or support in this case.

  Also make sure that you call updateLibrary in your custom store. In the native Android Viewer you * call updateLibrary() wort * before waiting for folioMap to be filled.

  Neil

• Compaq presario s4100nx: how to clear data on the disc hard the one computer dead

  my computer does not turn on more. no lights. It could be a power supply issue. lights at the front and rear lights for a second and then go off. It is not a new computer. I decided to recycle, but I would like to erase the data on the hard drive, before I recycle. can you help me please?

  Can you just delete it? If the computer does not work he'll have to clear outside the computer.

• I know how to restore my computer to an earlier date, HOW THEN I CLEAR DATE I DON'T WANT?

  I know how to restore my computer to an earlier date, (how to clear the dates I'm not?)

  See: http://support.microsoft.com/kb/306084

  This article describes how to use the System Restore tool to restore your computer to a previous state. System Restore takes a "snapshot" of critical system files and some program files and the registry settings and stores this information as restore points. If your computer is not working properly, you can use these points to return Windows XP to a previous state when your computer was working properly restore. It can also change scripts, batch files, and other types of executable files on your computer.

  FYI - http://www.microsoft.com/windowsxp/using/helpandsupport/getstarted/ballew_03may19.mspx

  and

  http://support.Microsoft.com/kb/310405

  I wouldn't count on SR for what anyone aged over 2 or 3 days. It is not a substitute for imaging of your player.

• How to clear data from the Application to SEEP

  Hi all

  Can you help me to erase the data of the application

  You can go to the calculation Manager, database properties, made a right click the type of plan and select clear and select the option - https://docs.oracle.com/cloud/latest/pbcs_common/CSCMD/ch10s06.html

  If you want to partially erase the data then you can watch a rule - https://docs.oracle.com/cloud/latest/pbcs_common/CSCMD/ch03s02s02s01.html

  See you soon

  John

• How to clear data from the page of the OFA

  Hello
  
  I want to erase the data on a customized OPS page. I have a page with two fields Start Date and end Date.
  These fields do not come from any VO. Here are the fields of input by the user.
  When you press the button then submit an array of result is filled on the same page.
  But when these parameters are entered again then the data is not refreshed according to the dates of new entries. It remains the same.
  I want previous data should have disappeared and the new data should appear when you click on the Send button.
  No Clear key should exist separately.

  Hi 847828,

  You can use the following approach.

  Private Sub (pageContext OAPageContext, OAWebBean webBean) filterDataprivate {/ / this method call to your submit button}

  Am = (OAApplicationModule) pageContext.getApplicationModule (webBean) OAApplicationModule;
  OAViewObject vo = (OAViewObject) am.findViewObject ("yourVOName"); {

  Note You can throw NullPointerException if FyourdateParam and TyourdateParam are now worthless
  String yourFDate = pageConext.getParameter("FyourdateParam").toString ();
  String yourTDate = pageConext.getParameter("TyourdateParam").toString ();

  vo.setWhereClause ("s yourTableDate" + yourFDate + "and" + yourTDate);

  System.out.println (VO.getWhereClause ()); for debugging purpose

  vo.executeQuery ();

  }

• combination of clear data in the rule of the load

  Hi - I am looking to automate my process clear, load and calc. In my dim scenarios, I have a lot of scenarios, goes the same for my dim versions. Before loading data, how do I clear on the particular scenario and version using my rule of load functions without having to actually know what scenario and version?
  
  For example-, my load of data goes into Estimnate1, esityksen, FY10, and every month. How can I create my rule of data loading so that it will empty FY10 Estimate1, esityksen, without specifying exactly the members? Are there settings? Or the substitution variables? or something that I can use?
  
  Otherwise, I would create 72 batch files which will clear, load and calc each scenario and combination of the version that the user selects.
  
  Thank you.

  Don't know what gives, I've never tried.
  My understanding is that the combination of scenario-based / version of the input file, you must clear this data before reloading of the input file.

  Create a clear calc script using sub-vars for the scenario and version.
  Create a script maxl to update the scenario and version sub-vars.
  Create a script to parse the input file to get the values of scenario and version, then call the maxl script to update sup - vars with these values.

  Then run claire calc script.
  Then load and Calc (good news, you can also use the same sup - vars for your calc rollup)

  Robert

• I had to clear data, android phone, for Firefox settings and now firewall Bluhell install.

  I had Bluhell firewall addon installed before erasing data from Firefox, in settings of android phone, but now I can't reinstall it. I didn't disable it prior to the erasure of data from Firefox in the android settings

  Thanks for the reply but I literally just solved it. It was data firfox app I had to delete, in the android app phone settings, when I opened firefox after that and tried to install Bluhell, it would not install, but when I clicked on the name of developers and crossed on his page he was installing of their. Again thanks for the response I had trouple find my post to change its State, I didn't realize the forum wasn't working in the office.

• Re: Satellite C660/C660D will using clear data on the D partition recovery?

  Therefore data on D safe if I use the recovery?

  Thank you

  Hello

  My knowledge using Recovery Disk format the entire HARD drive and all the partitions would be created again during this process.
  This means that your data on the D partition are not safe.

  But after my experience, retrieve the use of the HARD disk format only the partition system (C) not very well that if this applies to all laptops Toshiba so maybe you should test this first time in such a case would recommend backup data if partition D should be deleted.

• How to clear data from XY graph for another try

  I have a chart XY Motors charges against intensity. I used shift registers to build the table VI. After termination of the program once using terminal stop. And I deleted the graph. When I started taking the measure a second time, same data again before the first. So how can erase it. Please answer

  It's a very quick way to do it: initialize your shift registers.

  What happens in your VI is that, after the VI stops (when you click the stop button) the data contained in the shift registers (your matrices X and Y) remains in memory, if you rerun the VI it will add data in these tables.

  To initialize your shift, registers, you need to connect vacuum table them before the while loop. Like this:

  

  hope this helps

• BBM BBM all contacts disappeared after 'Clear data' on Android

  Hello

  I want to spend all my contacts of Xperia to Experia Z2 Z1. I re - install BBM on Z2 and connection I just advise that to close your session just erase the data. So I "(effacer les données om mon Sony Xperia Z1) (setting > apps > BBM)." After that I have to connect on Xperia Z2, but only 6 available contafts. There are 106 contacts on my Xperia Z1. I deleted the BBM on Z2 and connection on Xperia Z1 but contact only 6.

  How to recover all my contacts who have already disappeared?

  Thank you.

  Timmy

  Erasure of data from the method you described does not BBM, BBM contacts contacts are stored in your BBID, which cannot be removed by deleting BBM data on an Android device.

  Can you please confirm that you are using the same BBID on Xperia Z2 that you used on the Z1 Xperia? When you open the BBM for the first time on the Xperia Z2, choose 'Connect' and enter the e-mail address and the password for the BBID you used on your old device.

  Let me know how it goes!

• Clear data not working somehow

  This is the strange, I couldn't understand why, we have Essbase 11.1.2.4, cube BSO with typical dimensions (accounts, periods, years, scenario, company, customer service), accounts and periods are dense, I try to erase a month balance sheet data and reload them, here's the script

  ESS_LOCALE English_UnitedStates.Latin1@Binary

  UPDATECALC OFF SET;
  Set aggmissg

  DIFFICULTY (@DESCENDANTS ('check'), 'Jan', '2015', 'Real')

  CLEARBLOCK ALL;

  ENDFIX

  However I refresh data and Smart View is still there, so I try different way to do

  ESS_LOCALE English_UnitedStates.Latin1@Binary

  UPDATECALC OFF SET;
  Set aggmissg

  DIFFICULTY (@DESCENDANTS ('check'), 'Jan', '2015')

  CLEArdata "real."

  ENDFIX

  But it doesn't always, advice?

  Thank you

  Our guru Cameron explained it in a very good way. Please read the article.

  http://camerons-blog-for-Essbase-hackers.blogspot.com/2011/01/stupid-programming-tricks-6_03.html

• Clear data or remove members?

  Hi all
  
  I have the dimension of time as hierarchy
  
  Year
  -The quarter
  -Months
  -Date(01-01-2011)
  
  We have used to do incremental load. Now, we have the data modified at full load and faced with the problem of PRODUCTION with duplicate members.
  The hierarchy now looks like this
  Year
  -The quarter
  -Months
  -Date(01-01-2011)
  -Date(Jan 1 2011 12:00AM)
  We have data from 2007 to the essbase cube.
  We can remove all the data and load again, but in the database (SQL), we have data only from Q2-2009. If we delete we cannot load the data for 2007, 2008 and Q1 2009.
  Duplicate members are present in the Q2 2009 to date in essbase application.
  
  Can you please let me know how to remove members duplicate to the title of the TIME dimension or how to solve this problem.
  
  Thank you
  Alain

  If duplicate members have no data required against them then it's alright delete them of EAS and then rerun the routines of the environmental impact study.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Clear data ASO

  We are erasing data in the ASO cube by refreshing the previous data with files rules files to insert the #missing into the same combinations.
  We are able to erase data.
  But my doubt is whether it will reduce the size of the cube or we need to restructure the cube?

  If you replace the existing data with #missing in a cube ASO, then will be reduced the size of the cube.
  Unless it is necessary to distinguish between zeros and the missing values in the database, it is best to replace the zeros with missing values
  It will be also reduced the size of the database.
  You don't need any restructuring.

• Proportion of clear data

  How to erase Member dat [part] in dimension of value.
  
  Help required urgently

  Try to write it in the subroutine for calculation.

  Varun