Clear data not working somehow

Similar Questions

• Automatic switching of WiFi in the cell for the data not work, requires a restart of the phone

  The phone is a peak of Geeksphone, and the version of the operating system is 1.4. The problem is with the automatic switching of the WiFi to cell for my data. If I take the phone outside the WiFi range, it does not acquire the data (2 G, Edge, H or 3 G) signal and so I have no data. I left for hours without success. The only solution is to reboot the phone, then outside the configured WiFi connections and it will collect data signal. When I re - get the WiFi area, it captures the network and without problems.

  I also had this problem with version 1.1. I upgraded to think it could be fixed, but he did not.

  Thank you, Ralph. There was an update available which appear not yesterday. After the installation, I get the options that you quote, namely to turn the cell data in the notification area. Thanks a lot for the tip and the quick response.

• TiWorker 50% of CPU and the update does not work somehow

  I just bought a copy of Windows 8 Pro and I see that there is a process eating up 50% of my CPU.

  It is called "Windows module installer worker'/ TiWorker.exe.»

  I tried to run a few updates in the hope that he will fix it (but why aren't the updates included in version 8 to win that I just uploaded today, I don't know). I can't update anything.

  I am very frustrated because I lost 6 + hours of my weekend on it and while I was excited to Win 8, it turns out that it is such a complete waste of time. Amazing and if it is not midnight, I would be at half way through the installation of Windows 7 now.

  I had the same problem on my Toshiba Z30t running Windows 8.1 64-bit Pro. Shortly after this unpacking, I have run Windows Update, and after 30 or so updates have been downloaded and installed, high TiWorker.exe his head and gradually resumed close my laptop.

  After a lot of Googling on the last days, I ended up the advice in this column bit-tech at the failed subject update of Microsoft for the maintenance of the battery.

  Opening line of command in administrator mode, I ran the command Deployment Image Servicing and Management (DISM) with the following switches:

  DISM / online/cleanup-image /restorehealth

  And after a reboot, no TiWorker.exe more not hogging my Z30t, even when I left it inactive.

• "History & clear Web site data" in Safari does not work on my iPhone 5 ios running 9.1.

  The "clear history and data from the Web site" in Safari does not work on my iPhone 5 ios running 9.1.

  How to determine you are exactly ?  It works fine on my 6s + 9.1 running.

• Yahoo's page cannot be opened properly, the data are clustered on the left side of the screen and do not work

  When opening Firefox, browser my Yahoo homepage is loading properly. It opens but data on the Yahoo page are all the cloged on the left side of the screen and do not see the data nor the icons of work, and I can not access any information or sites, do not respond or work the yahoo page...

  It takes place before, but within hours or the next day, it opens correctly withouth do nothing, but now does not work since yesterday.

  I have window XP

  Hello ajdf9, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• EL Capitan automatic date time does not work

  People

  I use an El Capitan 10.11.5 MacBook Air version.

  I noticed that the data and time does not work even though it was set to auto to time.asia.apple.com.

  I ran these commands on a terminal

  $ping-c 5 time.asia.apple.com

  Ping: impossible to solve the time.asia.apple.com: Unknown host

  $ping-c 5 time.nist.gov

  PING ntp1.glb.nist.gov (64.113.32.5): 56 bytes

  64 bytes from 64.113.32.5: icmp_seq = 0 ttl = time 44 = 386,629 ms

  64 bytes from 64.113.32.5: icmp_seq = 1 ttl = time 44 = 307,532 ms

  tell me ping works but not for the server ntp - time.asia.apple.com

  $nslookup time.asia.apple.com

  Server: 192.168.1.254 address: 192.168.1.254 #53

  Non-authoritative answer: time.asia.apple.com canonical name = time - ios.g.aaplimg.com.

  time - ios.g.aaplimg.com canonical name = site time.apple.com.

  Site Time.Apple.com canonical name = time - osx.g.aaplimg.com

  $cat /etc/ntp.conf

  Server time.asia.apple.com.

  $ ntpq Pei

  No returned ID association

  Please, back up all data.

  Open the window of network preferences, if necessary, by clicking on the padlock icon in the lower left corner and entering your password. Cllck advanced, open the DNS tab and change the addresses of the servers as follows:

  8.8.8.8

  8.8.4.4

  It's Google DNS. Click OK, and then apply.

  In Safari, select

  ▹ Safari preferences... ▹ Confidentiality ▹ Remove All site data

  and confirm. If you use another browser, clear the cache memory. Test. Any difference?

  Notes:

  1. If you lose Internet access after the above change is made to your network settings, remove the Google servers in the network preferences pane, then click on the TCP/IP tab, then click on renew the DHCP lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click on apply so that the changes take effect.

  2. I do not use Google DNS myself, but I tested it, and I do not recommend it or any other provider DNS; the addresses of the servers are only available for testing purposes. There may be privacy and technical issues involved in the use of this service, that you should personally study before deciding whether to retain the settings. Other public DNS services exist.

• Smartphones blackBerry 9900 data Plan does not work!

  Hi, new here, great site!

  I'm from Canada, with Koodo and bought a unlocked 9900 opportunity, my neighbor via a Classifieds site, and as much as I know it was his business phone.
  I wiped it it clean and improved the operating system to 7.01

  I noticed that the previous service logo remains still (Rogers) during boot-up/shutdown, hmm, OK whatever he is working with Koodo.

  I called Koodo to allow data, but nothing works. I called them and they told me to enter "bb.koodo.com" in the APN field with no username and password. Then to save the host Routing Table (he told me that he registered very well) but I did not receive a message. Also, we have removed battery and tried everything again. It still does not.

  It is H + at the top right of the screen, but who has always been there.

  She said that maybe the phone was restriction IP since I bought it used, and maybe BB Swiss Army tool could help me get off, but she didn't know how. So I downloaded and pushed some buttons (more precisely remove COD) and really messed up my phone... lol

  Just reinstalled OS7.01 once again and fortunately had a fairly recent backup.

  Suggestions for making data work, or do I need a new phone?

  Hello and welcome to the community!

  Serious9900 wrote:

  bought an unlocked 9900 used my neighbor via a Classifieds site, and AFAIK it was his business phone.

  Let's start there, because who can be tricky depending on what exactly is meant by "business phone". Reference:

  • Article ID: KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

  Many of the steps can only be carried out by the seller... for example, if the prior carrier still has a BIS account allocated to that specific device, so no other carrier will be able to create a BIS account for her, and a BIS account is required to use wisely. As a general rule, a carrier will come out only the BB from the account when the real account holder made the request... and you will not if this situation applies.

  In addition, if the device has been activated BES, you need to follow additional steps. Reference:

  • Article ID: KB30076 How to check for an it on a BlackBerry smartphone policy

  If there is an IT strategy, then there are a special method, you need to remove it, but it will be successful if the BES server, to which the device has been set already has the removed feature of it... you may need to ask the previous owner about it. If this BES server was deleted, you can use this method to clean up the it policy:

  • Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  It is necessary to use this exact method... refer:

  • Article ID: KB16307 Actions performed by the BlackBerry smartphone during the removal of the user stored and application data

  Now, with all these preliminaries of the road...

  Serious9900 wrote:

  I noticed that the previous service logo remains still (Rogers) during boot-up/shutdown, hmm, OK whatever he is working with Koodo.

  As you guessed, it's irrelevant. BBs are still originally designed for a specific carrier... and some of these contractual carriers with BB to place a splash screen of starting the device ROM, that can never be changed. But, it does nothing other that that unit was built for this carrier... but as long as all other things correctly, it is not serious at all.

  But, to be clear, when you say "it works on Koodo", I guess that's your voice services? And are all now, you must operate your data services? If telephone services do not work correctly on Koodo, then it is useless trying to get data services going.

  Serious9900 wrote:

  I called Koodo to allow data, but nothing works. I called them and they told me to enter "bb.koodo.com" in the APN field with no username and password. Then to save the host Routing Table (he told me that he registered very well) but I did not receive a message. Also, we have removed battery and tried everything again. It still does not.

  But now say you "nothing works"... should I continue to assume this are information specific to the data, and that telephone services continue to operate properly on Koodo? Sorry for being blunt, but clarity is critical or waste us time on unnecessary things.

  When you say "he told me that he registered very well", which means exactly please? This means that he said something like 'Check pending', 'Record sent' or some other message popup? Once again, here the clarity is critical. If that's what you saw, then indeed it is not registered correctly. Rather, he made the application very well... but until the enrollment message arrives in the Messages application, then the intervention is required since the data network of the carrier did not and until it nothing for the data will be working.

  Serious9900 wrote:

  It is H + at the top right of the screen, but who has always been there.

  Upper case H +? Once again, just double check, since if she was tiny, that it would mean something completely different from that of capital letters. Top of case, this is what it must be.

  Serious9900 wrote:

  She said that perhaps the phone restriction IP since I bought it used

  I don't know what she thought about it. May be restriction of BES and if the above process I gave you can purify that.

  Serious9900 wrote:
  and that maybe BB Swiss Army tool could help me to remove, but she didn't know how. So I downloaded and pushed some buttons (more precisely remove COD) and really messed up my phone... lol

  Never good to a few buttons when you don't know what you do... I don't remember if BBSAK is able to remove political or not, but it can do a very good cleaning.

  Serious9900 wrote:

  Just reinstalled OS7.01 once again and fortunately had a fairly recent backup.

  And that could be part of your problems. If, for example, the device has one IT political edge, while part of a full process... which means that even if you happen to clean off, a complete restoration simply will return to the instrument, turning to your right back to where you started backup/restore. Instead, to do only a partial backup or restore, and more precisely to avoid data bases that have to do with THIS, political, business or something similar... the conservative approach is to only to backup/restore of critical databases you need (for example, contacts, calendar) and manually reconfigure the rest. Remove a policy is a tricky thing.

  Serious9900 wrote:

  Suggestions for making data work, or do I need a new phone?

  I think you have enough to start on top. Another question about whether Koodo, however, is if their network is configured to auto-fill your specific with entries HRT device model and service book. If their network is not, while actually explains everything. No carriers configure their network to support all models of BB... each one chooses a subset of the model numbers of BB and configure their network accordingly. But trying to use a model number BB on a carrier network that is NOT configured for this model results in number exactly what you live... their network will not automatically grow some HRT and SB entries on your device because their network does not recognize your device as a model BB number taken in charge.

  Looking at a reference that I can find, it seems that Koodo is configured for the 9360, 9300, 8530 and 9790. But not for the 9900. Now, is that with a proverbial grain of salt... that reference does not necessarily mean that the network of Koodo is not configured for the 9900, it's just an indicator that is not. Koodo can only tell you that answer for you.

  Good luck and let us know!

• Date filter column does not work

  Hello

  I use jdeveloper 11.1.2.4.

  I have a table with a side of column and the date filter.

  The date comes from a view object, based on an attribute of type Timestamp.

  The format is: MM/DD/YYYY.

  When I enter a date or choose a date in the date picker and press on enter the table is empty.

  I expect to get the correct filtered lines.

  This is my code:

  It is a simple code created when I did drag the view from data on page tabular controls.

  I got to it.

   <af:column sortProperty="#{bindings.MyView.hints.MyDate.name}"
                                                 filterable="true" sortable="true"
                                                 headerText="#{bindings.MyView.hints.MyDate.label}"
                                                 id="c9">
                    <f:facet name="filter">
                          <af:inputDate value="#{vs.filterCriteria.MyDate}" id="id2">
                                  <af:convertDateTime pattern="#{bindings.MyView.hints.MyDate.format}"/>
                           </af:inputDate>
                     </f:facet>
                     <af:outputText value="#{row.MyDate}"
                                            shortDesc="#{bindings.MyView.hints.MyDate.tooltip}"
                                            id="ot8">
                                          <af:convertDateTime pattern="#{bindings.MyView.hints.MyDate.format}"/>
                     </af:outputText>
       </af:column>
  

  Could you help her?

  Why the date filter does not work?

  Thank you very much!

  Thus, it is a problem.

  In order to work, you must somehow truncating HH part, the same as if you were doing SQL tronque().

  There are several ways to do it, but, maybe you can change SQL of VO and add a new truncated attribute one?

  And rather original attr, you can filter a new?

  Also, take a look at:

  Oracle ADF 11 g tips: September 2011

• It does not work when you use the trigger to check the data of the other table.

  Please help me with this, I put a trigger on a table, but it can not work as I expect.
  
  case study: a class has many students, one of them is going to match.
  The purpose of this trigger is to check when to choose a student going to match, this student has in his class where it belongs to.
  Oracle version is 10.2.0.1.0.
  

  --table:
  DROP TABLE STU;
  DROP TABLE CLASS;
  
  create table CLASS(
  CID     VARCHAR2(5)   PRIMARY KEY,
  CNAME   VARCHAR2(20)  NOT NULL,
  SCHOSEN VARCHAR2(5));
   
  create table STU(
  SID     VARCHAR2(5)   PRIMARY KEY,
  SNAME   VARCHAR2(20)  NOT NULL,
  CID     VARCHAR2(5)   NOT NULL REFERENCES CLASS(CID) ON DELETE CASCADE);
  
  --data:
  --CLASS
  INSERT INTO CLASS(CID,CNAME) VALUES(1,'SUN');
  INSERT INTO CLASS(CID,CNAME) VALUES(2,'MOON');
  INSERT INTO CLASS(CID,CNAME) VALUES(3,'EARTH');
  --STU
  INSERT INTO STU VALUES(1,'JACK',1);
  INSERT INTO STU VALUES(2,'TOM',1);
  INSERT INTO STU VALUES(3,'LILY',2);
  INSERT INTO STU VALUES(4,'DUSTIN',3);
  
  --TRIGGER
  CREATE OR REPLACE TRIGGER CHECK_SCHOSEN
  BEFORE INSERT OR UPDATE OF SCHOSEN ON CLASS
  FOR EACH ROW WHEN (NEW.SCHOSEN IS NOT NULL)
  
  DECLARE
  DUMMY INTEGER;
  INVALID_STU EXCEPTION;
  VALID_STU EXCEPTION;
  MUTATING_TABLE EXCEPTION;
  PRAGMA EXCEPTION_INIT(MUTATING_TABLE, -4091);
  
  CURSOR DUMMY_CURSOR (ST VARCHAR2, CL VARCHAR2) IS
    SELECT SID FROM STU, CLASS
    WHERE STU.SID=ST AND STU.CID=CLASS.CID AND CLASS.CID=CL
      FOR UPDATE OF CLASS.SCHOSEN;
  
  BEGIN
    OPEN DUMMY_CURSOR(:NEW.SCHOSEN, :NEW.CID);
    FETCH DUMMY_CURSOR INTO DUMMY;
    IF DUMMY_CURSOR%NOTFOUND THEN
      RAISE INVALID_STU;
    ELSE
      RAISE VALID_STU;
    END IF;
    CLOSE DUMMY_CURSOR;
  EXCEPTION
    WHEN INVALID_STU THEN
      CLOSE DUMMY_CURSOR;
      DBMS_OUTPUT.PUT_LINE('PLEASE RE-ENTER CLASS ID AND STUDENT ID AS CLASS OR STUDENT IS NOT VALID.');
    WHEN VALID_STU THEN
      CLOSE DUMMY_CURSOR;
      DBMS_OUTPUT.PUT_LINE('STUDENT CHOOSE SUCCEFULLY!');
    WHEN MUTATING_TABLE THEN
      NULL;
  END;
  /

  Just copy and paste on it and try to run next:
  UPDATE CLASS
  SET SCHOSEN = 3
  WHERE CID = 1;
  Clearly, you can't student who is 3 as to Member of class 1. Please help me. Thank you.
  
  Published by: 991096 on March 1st, 2013 02:36
  
  Published by: 991096 on March 1st, 2013 03:03
  
  Published by: 991096 on March 1st, 2013 03:11

  Hello

  991096 wrote:
  1. the purpose of this trigger is to check when to choose a student going to match, this student has in his class where it belongs to. Then, when I try to choose 3 student-member of correspondence of class 1, should give me "PLEASE RE-ENTER ID AND STUDENT ID AS CLASS or STUDENT not IS NOT VALID."

  Then do something like this:

  CREATE OR REPLACE TRIGGER CHECK_SCHOSEN
  BEFORE INSERT OR UPDATE OF SCHOSEN ON CLASS
  FOR EACH ROW WHEN (NEW.SCHOSEN IS NOT NULL)
  DECLARE
      sid_found     stu.sid%TYPE;
  BEGIN
      dbms_output.put_line (:NEW.schosen || ' = schosen entering check_schosen');             SELECT  sid
           INTO    sid_found
       FROM      stu
       WHERE     sid     = :NEW.schosen
       AND     cid     = :NEW.cid
       AND     ROWNUM     = 1     -- to avoid TOO_MANY_ROWS
       ;
  EXCEPTION
      WHEN  NO_DATA_FOUND
      THEN
       RAISE_APPLICATION_ERROR ( -20000
                      , 'Please re-enter class id and student id as class ('
                        || :NEW.cid
                        || ') or student ('
                        || :NEW.schosen
                        || ') is not valid.'
                      );
  end;
  /
  

  DBMS_OUTPUT creates only a message. The message may not be displayed, and if this is the case, then the user cannot see it. The DML will still take place.
  I used instead, RAISE_APPLICATION_ERROR to keep the DML does not happen. It displays a message like

  ORA-20000: Please re-enter class id and student id as class (1) or student (3) is not valid.
  

  ' 2 ' game ' means ' an official competition in which two several people or teams competing.

  What individuals or teams are competing in this case?
  In any case, the question wasn't 'that 'game' means', but

  Frank Kulash wrote:
  What do you mean when you say "going to match?

  I think that now you're saying that the new values of (class.cid, class.schosen) must be equal to (or "fit") some existing (stu.cid, stu.sid).

  3. thanks for your tip, I learned how to use '{code} '.

  4. it's really goes with the exception of MUTATING_TABLE. So, how do to fix the trigger to show me INVALID_STU EXCEPTION when I try to choose a student does not belong
  a class?

  Don't refer to the table of class in the trigger, and the error table mutation occur. All the information you need are in the stu table, so there is no need to query the table of class, anyway.

• Export model data as xml does not work

  Export model data as xml does not work

  Please advice on this subject? I created a template with editable regions - index.dwt, but when I try to export the model as xml - it is greyed out. I read another thread in this forum, but I'm not clear on the second stage of the given statement. Please click on the header to see step 2 on a previous thread.

  Please notify.

  THX

  Now that you have a template file, you can create a page by using the template file. Have a look here http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7ef da.html.

  Once you have created the page, you can export as XML.

  GRAMPS

• My imac (El Capitan 10.11.6 - 2 Terabyts) complete and FCPX disk will not work. I moved a few fcpxbundles library to an external hard drive (seagate 2 trabyte) and erased from the iMac. NowFCPX said that missing data as effects therefore can not shar

  Help!  My FCPX (v - 10.2.3) does not work because my iMac drive is full (iMac 21.5 inch has 2 terabyte w / v OS El Capitan 10.11.6) I had tried to free up space by moving tons of files on a usb disk Seagate (2 terabyte) speedboat that barely made a dent. then on the advice of a friend I found (in movies) a file called Final Cut backups. There were 4 files with extension, ".fcpbundle" I have three of them moved to another drive to Seagate usb - they had 2.82 GB, 21.6 GB and GB 68,21 that I thought should be enough and them removed from my iMac drive - bad! It says I have only 13.46 GB free on my 2 terabyte iMac total!

  The fourth fcpbundle it's TB 1.72! But before leaving that I returned and opened FCPX and found the warning triangle around my library... While my last project looked OK I couldn't / the share of exports because the pop-up says FCPX has no data for efx etc (the media looked at and display fine) and cannot be taken out.

  FCPX can work with the "beams" moved to another drive? How the detectable in a new place? Or how to put them back?
  How can I make sure that future packages clutter my iMac again?

  Do I need a RAID disks? If yes which?

  I found other folders in folders 'Make files' and records backup for projects with the .fcpbundle inside files

  How can I get this sucker working again?... and what should I do to keep him from doing the same thing in the future?

  Thank you

  John

  :.. then on the advice of a friend I found a file called Final Cut backups (in movies). There were 4 files with extension, ".fcpbundle" I have three of them moved to another drive to Seagate usb - they had 2.82 GB, 21.6 GB and GB 68,21:

  The backup files are only the database files (no media) and must be low, not gigabytes, do not know what is happening there.

  Media libraries stored in the bundle of FCP X library or stored outside?

  If stored at the breast, called managed media, simply copy and paste the library to a different location.

  Make sure that library books newly located correctly before you remove what either.

  Perhaps check your settings of the library.

  Click the library icon in the browser and it appears in the Inspector:

  

  By clicking on change settings shows this:

  

  Move the mouse over the media and it will reveal the path where things are sent.

  Then you might be able to track down what goes where.

  From you description, it seems that most of the media files and rendered is not be moved successfully.

  Some screenshots would be useful if you can't find where stuff is.

  Al

• moving data from Thunderbird to a new computer did not work - help, please!

  I - I hope! -followed all instructions Support of Thunderbird on moving a profile from one computer to another with a different OS (save a copy of the profile of the first computer file, download and install TB on the new computer, find the 'Profile' folder and then either paste the contents of the old profile file in the new profile file [thus overwrite the latter]) then open TB... but it didn't work.

  I then tried the same thing, but with a slightly different method: I copied the name of the new profile file, he has given the profile of the old computer file, then renamed the new file profile and pasted the old profile file - now with the new designation - in the new directory... which also did not work.

  I spent a few hours trying to get this to work and am almost to the point of giving up on tuberculosis as an e-mail.

  Any help would be welcome!

  Hi, Matt;

  Thank you for your continued support - I appreciate it!

  Yesterday, I downloaded the command-line tool dbx to eml unless you had kindly recommended (at http://code.google.com/p/undbx/ ), and, as I had supposed, its function is to do what OE itself can only do by email - that is, convert a .dbx .eml format - but do it by folder, records forever, which is much more elegant.

  The tool dbx to eml was very easy to download and use, and I could ask him to convert all my files at once (which is equivalent to more than 50 records and hundreds of emails). He did a great job, and I was able to identify the location of the output directory that results anywhere I wanted.

  Because the tool dbx to eml records records converted to any specified location, one can then import them into Thunderbird Thunderbird either on the same or another computer.

  I wanted to spend all my email OE to a new computer (which involves a passage from XP to Windows 7), and, in my case, it was easy to do because I have two computers connected by a network (intranet) data drives: after you convert all the OE dbx eml files, I went to my new computer to Thunderbird instance and , using the add-on for Thunderbird Import-ExportTools (https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/), I simply imported saved eml files, one at a time. It has worked flawlessly.

  In a situation in which two computers were not connected by a network, we could easily save the eml on a USB output directory and have computer of the new Thunderbird import eml from this location.

  I would also add that this dbx to eml command-line tool is supposed to also function as a current backup utility: it begs for find and convert new files later in OE, and it only will not do, but is also their corresponding folders in the original output folder, if they exist from a previous operation.

  I still have to import all my newly created on my Windows 7 Thunderbird eml files, but - so far - it seems like it should work smoothly.

  Based on the different methods I did research - and the few that I actually tried - has my reviews, so far, is that using the tool of command line without dbx-to-eml, at http://code.google.com/p/undbx/ , is the way simpler and more reliable to move files from email Outlook Express - within their corresponding e-mail folders - to Thunderbird , either the same or different computers.

  It would be nice if Mozilla could try this method for themselves, and - if they are to find it as infallible, as I - promote this as one of the first methods to use to move electronic mail Outlook Express to Thunderbird. It others will save a lot of time and frustration.

  Matt - your kind and generous support made it happen: thanks!

• How can I get rid of a popup telling me I have a virus Zeus.  It locks my screen and try to "erase the history and data, etc." does not work.

  I need help with a popup that locks the screen of my iPadAir2.  Go to the setting and compensation history/data does not work.

  If you have deleted the historical data and Safari Web site, and nothing is resolved, the problem is on the wireless router. Check your router wireless for possible violations.

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.

• Pandora radio is not working properly, they saty I need to upgrade to a newer version of firefox. Not very clear how to do this? fire fox says I have an old version. I need help to update, why it so difficult?

  Pandora radio is not working properly, they say I have to upgrade to a newer version of Fire Fox. Fire Fox very little makes it clear on how to do it. I'm not a computer genius! I have an outdated version. Summer

  You are using Firefox 3, which is the previous major version. The current version is Firefox 7. I'm not familiar with your Facebook plugin, so I don't know if it is compatible. If it isn't, Firefox will automatically tell you and ask you if you want to check the updates. You can download the installer of Firefox 7 by clicking here.