Clear ISAKMP for a single IP address

Similar Questions

• Tunnel work Split... but only for a single IP address.

  Hi all

  Dealing with a really frustrating problem. Our facility, roughly speaking, is as follows:

  -We have a remote VPN access that users connect to any Connect; in turn, they receive a local LAN address: 10.1.11.192 - 10.1.11.200

  -We have a VPN site-to site that connects to Amazon AWS Access 10.0.249.0 and other subnets and now some hosts on the Amazon * public * network (for example, 54.1.2.3). This is done via a tunnel from split.

  What we see is the following:

  -Users to connect to the VPN and are assigned to one of the addresses above. We use 10.1.11.192 for this example.

  -They can then access anything in the 10.0.249.0 subnet (by the split tunnel) very well. It goes through two ASA devices.

  -They can then access anything in the public network from Amazon (by the split tunnel) very well. This should use Remoting ASA.

  So, it seemed that everything was working. When connected to the VPN, Amazon hosts in 10.x.x.x networks and public IPs I had precisely in tunnel (we plan make the transition to a VPC soon) were accessible, and access came through the VPN IP remote access (IE, when connecting to 54.1.2.3, it showed the user being logged from the address of the gateway from the Cisco IP (, as opposed to the local client IP).

  Now, here's where things are weird: * public * hosts on Amazon in tunnel only works with the first address in the pool, 10.1.11.192. No other addresses don't work. 10.0.249.x is always available, regardless of the assigned IP. 54.x.y.z is only available avec.192.

  I used the same computer with different assigned IPs (10.1.11.193 - 10.1.11.200), and none work. I connected using different computers... they work si.192, but not no matter what other addresses assigned. Other users report the same problem.

  Transfer TCP protocol is a failure

  I'll use our IRC server (and sometimes ssh server) for testing. I can see my laptop the customer with a SYN_SENT on this specific topic. I can see the IRC with a SYN_RECV and shows Server ASA a SYN timeout after 30 seconds. So, it seems that the IRC server packages cannot make their way through the ASA for my laptop the customer.

  I suspect it has something to do with the dynamic static vs NAT, etc, but I've fiddled with every setting I can and come in white.

  I am also puzzled as to pourquoi.192 works, but no other addresses don't.

  I have attached our configuration, less keys and passwords and addresses IP/hostname. It's a little ugly because there some poor attempts to solve this, things will probably remove once it works, but... It might have something to do with randomization of TCP sequence?

  Thanks in advance for any help.

  Hello

  I also enough to explain everything in detail. Even if sometimes it is just too much for my head when I'm tired

  Have you managed to fix the problem that arised to change settings?

  The output of "package Tracker" for the failed connection would be important.

  But now that I look at your original configurations and consider your need for VPN Clients to access a selection of public IP addresses through the ASA it seems to me that perhaps your problem is lack of NAT configuration for this traffic. (which may indicate the "packet-tracer" )

  You need a dynamic PAT from the 'outside' to 'outside' for users VPN be PATed to the external IP address of ASA

  Something like this for example

  network of the VPN-CLIENT-AMAZON-AWS-PAT object

  10.1.12.0 subnet 255.255.255.0

  dynamic NAT interface (outdoors, outdoor)

  Or if your original pool of VPN is used, change the network above.

  Dynamic provisioning PAT above essentially aims to intercept coming from behind 'external' VPN traffic that goes through the 'outside' interface and the dynamic application of PAT for the public IP address of the ASA. For the moment, that seems to me that address network-10 crosses the ASA without NAT essentially leading to SYN timeout newspapers.

  But if I understand you are saying that one of the pool reached VPN address IP address of public destination that does not really correspond with the situation described above. However, I don't see any NAT/PAT configuration for VPN traffic to the public IP address. Look at your log messages. They mention the same IP VPN address pool twice (the other inside the () ) which means there is no NAT for the source address and the ISP traffic naturally declines.

  -Jouni

• for authentication single controller 5508 AP

  Hello

  in our project, they are two of 5508 wireless controller

  We need to set up sso AP for two wlc

  the licenses we bought for only for a controller

  as shown below

  Cisco	AIR-CT5508-500-K9	Cisco 5508 wireless controller series APs up to 500
  Cisco	CON-SNT-CT08500	Range Cisco 5508 SNTC-8X5XNBD
  Cisco	LIC-CT5508-BASE	Basic software license
  Cisco	LIC-CT5508-500	AP 500 Base license
  Cisco	SWC5500K9-80	Cisco Unified Wireless Controller version 8.0 SW
  Cisco	AIR-PWR-CORD-UK	AIR Line Cord United Kingdom
  Cisco	AIR-PWR-5500-AC	Cisco series 5500 redundant power wireless controller
  Cisco	AIR-CT5508-HA-K9	Cisco series 5508 wireless controller for high availability
  Cisco	CON-SNT-CT5508HA	1 year, SNTC 8X5XNBD Cisco 5508 series Wi

  My question to switch to wlc reduancy we're going to assign for each AP in high availability of the primary and secondary ip address

  APSSO how will tip work

  in each access point how to assign IP primary and secondary for each APs at APSSO

  and the licenses are purchased for a single controller

  specialists please advice of the work of these APSSO topology for two controller

  Syed,

  With SSO, you must initially have an ip address for both controllers.  Then when configure you SSO, the controller HA will be the primary backup.  License is required on the controller sku non-HA.  Failover will automatically happen without problem for the AP or end users.

  If you went with N + 1 and not use the SSO, then you need an ip address for each controller and each controller must be configured.  There are many deployments of N + 1 there, but SSO becomes popular due to rapid failover.  The only question is if SSO gets corrupted then both are in decline and that's the advantage of N + 1.

  Your list is great for either.

  -Scott

  Please evaluate the useful messages *.

• LAN to Lan VPN on ASA - than a single public address...

  Hello, I need to find a way to work around this problem.

  We have an ASA 5510 8.3, we need to use to terminate a VPN IPSEC in LAN to LAN running.

  Problem is that we have only a single public address available for having set up the link between the ASA and the Internet router on private addresses.

  Is it possible to NAT the public facing the inside or to the outside interface of the ASA and terminate the VPN on this interface?

  If this isn't the case, I have other options?

  Thanks in advance!

  Rob

  No, you can't NAT, the IP address of the ASA on the SAA itself, which is not supported.

  You can also terminate the VPN tunnel through the interface on the ASA.

  How and where you currently do NAT for internet access? You cannot configure NAT on the same device where you are currently configuring your NAT?

• How can I get audio to play for a single slide in Captivate 5.5?

  I am using Captivate 5.5 on Windows 7.
  I added text to speech audio to my slides.

  Previously, I could get a glimpse of a single slide with audio.

  A few days ago the audio has stopped playing to preview the slide.

  The audio plays when I preview project, then 5 slides, etc.

  Do you have any suggestions on how I can get the audio to play again for a single slide?

  Hello

  Look in the timeline panel. More specifically, the area where names appear on the left side. Now, look down. You should see a small speaker icon. My guess is that you've clicked on it to cut it. Jump to the right and literally SCREAMS she's dumb, right?

  Please report only as a problem to Adobe. Ask a clearer indication!

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• search engine for a single click is blocked on "search for firefox search engine ' all the time, whenever I changed it and it will not remain as google, it will return

  search engine for a single click is blocked on "search for firefox search engine ' all the time, whenever I changed it and it will not remain as google, it will return

  I want it to be as if it were before, google as my main search engine

  now its still stuck on "search for firefox search engine" which is the yahoo search engine that is really garbage

  In addition, your Firefox is identified at the forum as version 38. An update is available: this article describes how to get 49 Firefox using the "About Firefox" dialog in the menu help: Firefox update to the latest version.

  If something is holding you upgrade to Firefox 49 (or if you use the ESR, Firefox 45esr series), please let us know if we can offer you solutions or workarounds. Version 38 is not safe; Mozilla reveals security flaws after each new version.

  Sometimes Firefox reports the wrong version, because this information was frozen in a preferences file. If the troubleshooting information page shows Firefox 49.0.2, you may need to clear this incorrect information. See:

  • Use the troubleshooting information to help solve the problems of Firefox (first table should indicate your current version number)
  • How to reset the default on Firefox user agent

• Firefox crashes at startup for a single user, but not another

  Crash ID: bp-df3a48d7-363c-4d2f-87d3-f73902140723
  Version: 31
  Crashes at startup for a single user, but not another. Both are directors.
  I uninstalled and reinstalled. No change to each user.
  Crashes in safe mode as well (hold down the SHIFT key)
  No present addons in the other user.
  Ran Malwarebytes and cleaned
  Ran CCCleaner and clean up all registry including uninstalled Firefox entries.

  This is not useful if firefox crashes at startup. because you cannot start to create the new profile.

• Since the installation of Firefox 8, when I type anything in the address bar and then press "enter" or click on the arrow for "go to the address in the address bar", nothing happens!

  Since the installation of Firefox 8, when I type anything in the address bar and then press "enter" or click on the arrow for "go to the address in the address bar", nothing happens! Similarly if a place is indicated by the location bar AutoComplete feature. I hit "enter" or click the "go to" and nothing happens. " Keyboard shortcuts to "complete the .com, .net, etc. addresses" doesn't work or the other. The address bar has worked well for entering web addresses before Firefox 8. Help, please.

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the Firefox 4, 5, 6, 7 SafeMode pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• AirPrint is not working since 9.3.1 what airprint update - not found.  tried the suggestion of JimHdk, who worked for a single document. any suggestions

  AirPrint is not working since 9.3.1 what airprint update - not found.  tried the suggestion of JimHdk, who worked for a single document. any suggestions

  Since we do not know what may have suggested to Jim, power cycle your router and the printer and force restart the iPad. Unplug the router and the printer power for 30 seconds. Plug in the router first and let it restart. And then reconnect the printer power supply. Then force restart the iPad. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• SQL Server 2008 R2 developer: this version include and allow to use ssrs, ssis and ssas intended for a single user?

  This version includes and allow to use ssrs, ssis and ssas intended for a single user

  Hi mikeyjoy,

  For questions about SQL Server, visit the Forums for SQL Server.

  Thanks for posting your question in the Microsoft answers Forum.

• I forgot my password for my msn email address then I sent a link for reset my Yahoo e-mail address but I never recived.

  I forgot my password for my msn email address so I sent a link to my Yahoo email address reset but I never recived, I have tried almost every week, but he won't always show

  Hi NickSingh,

  Thank you for visiting the Microsoft answers community.

  The question you have posted is bound using Windows Live and would be better suited in the Center of Windows Live Help solutions.

  Please visit this link to find a community that will support what ask you

• I need to download windows xp service pack 2 on a computer professional home for a single computer.

  I need to download windows xp service pack 2 on a computer professional home for a single computer.

  I am the administrator please help thanks vicki.

  Links to a downloadable version of all Service Pack for Windows XP updates can be found here:

  "How to obtain the latest Service Pack for XP"
    <>http://support.Microsoft.com/kb/322389 >

  Ignore any verbiage that says "for the professionals' because that's exactly what you're looking for.  They put that when service packs have been made public to cut down on bandwidth for everyone both this download.

  HTH,
  JW

• I have office 2010 & have now lost the spell checker in Outlook Express I also use "Outlook" for additional e-mail address spelling corrector does not not only Outlook Express

  I have office 2010 & have now lost the spell checker in Outlook Express I also use "Outlook" for additional e-mail address spelling corrector does not not only Outlook Express

  When I up graded to Windows 7, my spellchecker didn't work anymore.  Help, thank you, June

• Problem with website security cerificates. Said the security certificate presented by this website was issued for a different website address.

  Problem began the week last with Verizon's Yahoo email. I can't access it. I get the message on the certificate.  Said the security certificate presented by this website was issued for a different website address.  can hnts in and out of yahoo, but can not get by e-mail. I have Windows vista 32-bit home. Have tried several things offered by yahoo... Delete history, cookies, defragment the drive hard, etc. Then they said need to ask Verizon. Community sitting there, no response. I had a help line, but what they had me try did not work. Could not do the download help remotely, I tried Java plugin download, has got an error 12031, and a Microsoft fix it but none of it worked. Could not load. Then they said it was having problems with Microsoft windows problems. Error files, corrupted files and certificate & register...  I did a few other things too but do not know if someone can help me... Not even if I am in the right place.  I really hope that someone can help you.

  Hi Patsabo,

  I suggest you to check if you are facing the same question in the new administrator account.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• 160N not allowing access to a single ip address please!

  My router does not allow access to a single ip address.  I have a site that I have ftp access to and everything was working fine until today.  I can't access ftp with all the software and the site will not be rendered.  I checked all implement.  I called the hosting company, ISP provider and is not on their end.  I went to another computer somewhere else and everything worked fine.  I hooked in directly to the modem and everything worked as it is supposed to.  All other websites work very well.  It must be the router.   I have reset the router to factory settings and set to update the firmware.  As I said, everything was working just fine and then suddenly everything that is on the IP 1 will not work.  Any help with my situation is appreciated.

  Since you have already reset your router and re-configured all the settings in this topic. When your computer is connected to the Linksys router, on your computer, open the window command prompt and try to ping the IP address that you're trying to make it work with your Linksys router and check if you have all the answers.

  If not then on your configuration page of the router, click on the Security tab and disable the SPI Firewall and uncheck "Filter anonymous Internet requests" and click on save settings...

  Once you are done with these settings, you can now try to ping the IP address and check if you have all the answers...

  NOTE: Turn off the firewall and Antivirus on your computer...