160N not allowing access to a single ip address please!

Similar Questions

• My partners hotmail account is blocked we have followed all the instructions, but still does not allow access.

  Hotmail blocked

  My partners hotmail account is blocked we have followed all the instructions, but still does not allow access. The alternative e-mail account is no ideas

  Hello

  The question you have posted is related to Windows Live and will be well suited in the Windows Live Forum. Click on the link below.

  Windows Live Solution Center

  http://www.windowslivehelp.com/product.aspx?ProductID=1

• Cannot open this file because you are not allowed access to the location of the file

  I restored my compaq 510 professional vista, I get the "cannot open this file because you are not allowed access to the location of the file" whenever I tried to open a file or image

  I guess these are files from your previous installation. Take possession of them.

  A. check the permissions of the file or folder the file is saved in and appropriated:
        
  1. right click on the file or folder and then click Properties.
  2. click on the Security tab.
  3. under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information about permissions, see what are permissions?

  http://tinyurl.com/2j9vgr

  To take ownership of a folder:

  1 right click on the folder you want to take control and then click Properties.
  2. click on the Security tab, click Advanced, and then click the owner tab.
  3. click on modify. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. click on the name of the person you want to give to the property.
  5. If you want this person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.
  6. click OK MS - MVP - Elephant Boy computers - don't panic!

• Photo Gallery can't open the photo because you are not allowed access to the location of the file

  Photo Gallery can't open the photo because you are not allowed access to the location of the file some of the image are open

  Click on the folder and change your permissions for it and all subfolders and files all rights and if necessary take hand the case (and maybe the parent folder or even its parent - and all of the subfolders and files) until you have the permission you need.  Here are the general procedures to help you:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Player Windows 12 will not allow streaming on a single computer with ATT

  Windows player 12 will not allow streaming on a single computer with ATT but goes with another computer.  When streaming is selected, it refers to the administration tools.  Now what?

  Hello

  AT & T ATT are you referring?

  I suggest you refer to the following Microsoft help articles and check if it helps.

  The protocols in Windows Media Player use for streaming?

  http://Windows.Microsoft.com/en-us/Windows7/which-protocols-does-Windows-Media-Player-use-for-streaming

  Change settings for streaming media in Windows Media Player:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-streaming-media-in-Windows-Media-Player

  Hope the information is useful.

• Sorry, your subscription free story does not allow access to this application. Please update your subscription.

  I want to use the desktop Adobe Story version, but I can't. I downloaded, but when I open the software wants to connect adobe ID...

  Then, a window like this... Sorry, your subscription free story does not allow access to this application. Please update your subscription.

  I press the button upgrade that I have an error message in this link

  https://www.Adobe.com/cfusion/store/handlers/eLicensing/trialconversion.cfm?locale=EN_US & s ku = 10006855

  I don't know what I have to do... Is also that these must always be difficult!

  Hello

  It helps if you open this link in your browser's private browsing mode and then go further?

• Clicking on menus in Muse causes screen to flicker, does not allow access

  Updated to 2014 Muse, running Windows 8.1

  By clicking on the part of the menu text font, the screen flashes and does not allow me to change the font.

  In addition, after you create a rectangle and you attempt to add a hyperlink, click the hyperlink box, causes the screen doesn't Flash and does not allow access to the text box.  A lot of similar problems and Muse is now unusable.  No other problems with far adobe products (Photoshop works very well)

  The menus seem not to be the right size because I can't see all the text in their breast.  It's like they're waiting for my monitor at a higher resolution, (change the resolution does not help)

  I tried to uninstall and reinstall.  I removed the previous version completely.  I rebooted several times.

  Help!  (Please)

  Thank you all.

  Derrick

  Go to control panel of configuration and the value Display zoom 100% or 150%. The release of 2014 of Muse is not compatible with how Windows 8 and 8.1 reach 125% zoom.

• You are not allowed to add the e-mail address of your account and user already exists

  Hi Experts,

  My SAP CLM (Contract Lifecycle Management) System integrated system of Echosign by SAP itself and we test the functionality.

  Everything works fine and I am able to send documents to the signature of the CLM system and the beneficiaries are able to sign the document and even get all historical information and the status of it.

  But I am facing problems below 2 cases,

  1. for a particular user, whenever the user sends the document to the signature, we get the error:-"you are not allowed to add that e-mail address to your account.

  2. for another user,who already have created account itself, whenever the user sends the document to the signature, we get the error:- 'user already exists: [email protected]"" " ."

  
  

  For question 1, I googled and found the link the specified item was not found. , who seems to have the answer, but unfortunately, this link seems to be outdated.

  

  Any help would be great.
  

  Thank you

  Uday Chassagne

  Hi Uday,

  I sent you a message in response. Please check and provide the requested information.

  -Usman

• You are not allowed to send documents for signature. Please contact your account administrator

  Hello, I have a paid account and need to send a document urgent for signature. I tried for a long time and I get the following error: "you are not allowed to send documents for signature. Please contact your account administrator.

  
  

  We only use one account, we have an administrator account. I need urgent help! My client is waiting! What a shame!

  
  

  If I try to send the Adobe Acrobat document for signature seems to me this error:
  
  There was an error in processing of the document...
  
  Help!

  Hi sweet,

  Please contact the customer about this issue:contact customer service

  Kind regards

  Rahul

• HARD DRIVE EXTERNAL WD NOT ALLOWING ACCESS TO DATA

  MY HARDIVE TERRABYTE WD IS NOT ALLOW ME ACCESS TO ALL THE DATA THAT IT CONTAINED, BUT IT SHOWS THAT IT IS CONNECTED TO MY COMPUTER WHEN I PLUG IT INTO THE PORT AND THE LIGHT FLASHES AT THE DISK TO SAY WD WORKS. I HAVE TROUBLESHOOTED THE DEVICE AND IT SAY NO PROBLEMS FOUND

  Moved from feedback

  Original title: EXTERNAL WD HARD drive

  Hello

   
  As you said that the problem persists even by connecting the device to another computer, then the issue could be with the external hard drive also.
   
  So, I suggest you to see the link and install the drivers from the manufacturer's website.
  http://support.wdc.com/product/download.asp?lang=en
   
  Contact the manufacturer for assistance:
  Reference:
  http://community.wdc.com/
   
  Thank you.

• Access Manager will not allow access without password

  Access Manager does not allow me to access anything without having to type the password first. He started to do this without my permission.

  How can I stop the stop?

  Access Manager does not allow me to access anything without having to type the password first. He started to do this without my permission.

  How can I stop the stop?

  The administrator has put a password on the Internet.
  You can not surf without your administrator password. Talk to this person. No one here can help you.

  t-4-2

• VPN for PIX 515 allowing access to a single host

  I have already setup on my PIX 515 a VPN connection, which allows the user to connect to our network via a cisco VPN client to access network resources.

  I want to configure now is an another VPN connection that external users can use but would only allow access to a host.

  E.g. I would like to VPN in my site but would be allowed to access the 10.1.1.1 on my network.

  How can I do this? What I have to install VPNGROUP another and somehow an access list to allow only traffic to a host of configuration. Can anyone help with the correct syntax for the PIX.

  Thank you

  Scott

  You will now have a bunch of commands "vpngroup" in your PIX, simply go into config mode and add more commands 'vpngroup' but with a different groupname. The VPN client then uses this group name to connect to the PIX.

  Another way to allow only access to a host for this PIX is to split tunnelling on this group, as well as in the tunnel of split ACL set only as a host.

• Family Vista premium will not allow access the USB on HP All in One Printer L7580.

  Other laptops using XPPro have no problem.

  I get the message when I try to access "HP Officejet Pro L7500 series ( \\HP0017a425d4e0\memory_card )

  Message

  "Z:\is not accessible.

  The handle is invalid. »

  Printer works as a printer. Printer is connected by Cat5 to the Linksys router.

  Laptop is wireless.

  In another physical location almost identical except that I have a new installed L7590 and access is allowed to the USB port. No portable Vista run Fine in both

  locations.

  Any ideas?

  Solution found

• Try to write more %windir%\Printdir.bat on C; / (Root) - security will not allow access

  I struggled for several hours to restore the service right click that I used to have XP to Windows 7.  I need to save lists of file names such as displayed in the file Explorer. Allowing you to right-click and save files in Notepad. This option has been removed in Windows 7 and anything put in place to restore it.

  I have lists of items in the inventory and need to copy and paste the image corresponding to a transfer sheet to allow the server names to match images in article SKU.  The file names are long and typing is a complete waste of time.

  I used to be able to find them in the Windows Explorer, right-click on the directory and generate a txt file that I could open in Notepad or Excel.  -Easy.  Now right-click only allows an export in an uneditable image in ONE NOTE. This is useless for me. I can't do anything with an image file - I need the editable data.

  Is there a solution?  I need only the file name and extension, not the full path, in a text or spreadsheet document propagation.

  I had used the Microsoft solution to install their dose without knowing the final format was a NOTE image file format and not a simple txt file. I try now too write the batch file:

  %windir%\Printdir.bat

  or edit it in order to keep the file in Notepad and do not make the final conversion into a single Note.

  The problem is that the fix from Microsoft, designed to fix this problem, has placed the conversion file in the root directory and it cannot be overwritten.  I refused the possibility to delete, edit or write the file due to the requirements of administrative privilege mandated by the security of Windows 7 too much.

  So if anyone has a solution to every problem - that would help - I am very tired and frustrated and not happy with Microsoft.  Their zealous concern with security made their unnecessary programs for me and have further discouraged me to convert to the windows 10. frustrations and nightmares are waiting for me there I can't imagine.  What I really want to do at this point is to go back to XP.

  He ate five hours of my day. I don't have the time to fight like that. I am trying to be productive, but all I got are monumental technical walls and roadblocks - often designed into the system. Frustrating doesn't begin to describe it.

  Found a solution on a Web site:

  He said it was for VISTA, but worked for me under Windows 7. I had not to mess with the registry at all.

  http://www.watchingthenet.com/how-to-print-a-directory-tree-from-Windows-Explorer.html

• Allow access to a single host separate interface on the inside of the interface

  I use a Cisco PIX 515E ASA 8.0 (3) - two separate networks, one on each interface running...

  I have a separate network interface 'Wireless' intentionally because I share wireless with my neighbor and don't want it on my LAN 'inside '. I sometimes want to use the wireless myself, but only need to access my printer to 192.168.21.6

  How can I access the interface 192.168.21.6 wireless (just tcp/udp port 9100 I think). I've experimented with static controls, but could not operate? I need to create a separate IP such as 192.168.22.6 and map that to 192.168.21.6 inside the interface to be able to print?

  static (inside, wireless) tcp 192.168.22.6 9100 192.168.21.6 9100 netmask 255.255.255.255

  ACL not already allow ALL IP traffic between areas (except the RISKY PORTS) so no need to change that to make this work.

  You can also make static identity in which wireless users can access the printer using its original address. But this will create problems with the neighbor :).

  Please rate if useful.

  Concerning

  Farrukh