Clear the logs of life cycle

Similar Questions

• BlackBerry smartphones, I can't clear the log of events completely! Bold 9900

  I don't know why, but I just can't clear the log of events completely. I always stayed with two newspapers which cannot be erased. The two newspapers said: error and mistake. It's only affect the phone, but it's pretty disturbing with two newspapers cannot clear. I had tried to pull battery, resets and it can always be removed. Help, please.! My phone is the Bold 9900. Carrier is Singtel. Operating system to 7.1.0. HELP PLEASE! Thank you!

  Nope.

• How to clear the log of events on my hp m1217nfw?

  Hello world!

  Is there a solution to clear the log of events on my hp m1217nfw printer? I do not know how...

  Thanks in advance

  CYANOACRYLATE GLUE

  Hi CYANO.

  Your very welcome.

  Please consider this message Message 2 of 3 marking as "Accept as Solution" so that someone else in the community of HP who can meet the same or similar problem will know what to do.

  Thank you.

• Clear the log of the events of PSA

  Hello

  How you can clear the PSA Diagnostics event log?

  Thank you

  There is no reason to clear log PBA.  If the error appears every time that you turn it on then the problem has NOT been corrected.  The journal does not work like that.  Fan of errors when you put it in the BIOS POST errors are not errors of diagnosis of PBA.  Newspapers of compensation does not resolve errors physical post.

• Event Viewer Windows 7 'Administrative events' can not clear the log? Why and is there a solution?

  Window 7 has many error logs in the "Event Viewer", but all seem to have the ability to "Clear log" except the Administration? Why? I looked at some of the entries, and they you are referencing my "security cameras" this automatic restart after a power/Brown power. Yet I have not found a way to "clear a log this ' under 'Administrative events?' Is there a way to clean this newspaper? It's more than 1100 events, and none are major.

  Thank you

  Hank

  Hank

  Delete all log files, including the journal of the administrator combined, by running this command as an administrator file save it to the desktop and right click to run it. The link is here http://www.sevenforums.com/tutorials/25480-event-viewer-one-click-clear.html?ltr=E

• The limit of the device must be less than or equal to the limit of life cycle license in first cisco 2.2

  Hi all

  I have seen under error in the tool main 2.2 Cisco infrastructure

  The limit of the device must be less or equal to the limit of license of life cycle and also secondary device ISE inaccessible since premium.

  Could you please suggest how we can solve your problem.

  Thanks in advance...

  Kind regards

  Sachin

  Yes. Life cycle license are by smart device managed. See this page for a good overview:

  http://www.Cisco.com/c/en/us/support/docs/cloud-systems-management/Prime...

  .. as well as this page:

  http://www.Cisco.com/c/en/us/products/collateral/cloud-systems-Managemen...

  .. who States:

  Life cycle license: allows access to all the features of the life cycle, which includes the configuration of the devices, image management software, basic health and performance monitoring, fault management, troubleshooting and customer visibility on the network. The license of the life cycle is based on the number of managed devices. Life cycle of the licenses are available in sizes from package of 25, 50, 100, 500, 1000, 2500, 5000, 10,000 and 15 000 devices and can be combined as needed to reach a total number of device under license.

  A device is uniquely identified through the assigned IP address and system object ID (SysOid). Routers, switches, light/unified access points and network first Cisco (NAMs) analysis Modules are charged on the number of licenses. If a switch stack is managed via a single IP address, it counts as a single device. A single frame will, however, be counted as multiple devices if the chassis is configured with several IP addresses. For example, a switch with several service cards, such as a firewall and so forth, or a stackable switch with an IP address assigned to each switch who is involved in the stack is considered multiple devices within the first Cisco Infrastructure. Cisco Wireless LAN controllers (WLCs), autonomous and peripheral access points third are not counted against the number of licenses.

  When you have more devices that licenses, you will receive the error see you and prevented from adding additional devices to your inventory.

  We see it more often when it is light (i.e. not independent) APs are added to a wireless controller. PI will not prevent the new APs to be added, they are managed under their association with the WLC. However, if you try to add a new switch it would prevent you to do until the deficit of licenses has been sent.

• Link to download the trial of life cycle Designer does not work

  I bought a license for life cycle designer and trying to download the trial version for installation.  I can get the terms and accept them.  When I click on accept I receive the error processing request.  http://www.Adobe.com/cfusion/TDRC/index.cfm?product=livecycle_designer this is the link that is broken.

  

  I found a way to download the trial of ss4.

  1. Open this page to receive a specific cookie: applications download Creative Suite 6
  2. Then paste the URL of download directly in the browsers address field.
     Englisch http://trials3.adobe.com/AdobeProducts/ADSR/11/win32/lces_designer_11_0_0_wwe_win.zip
     German http://trials3.adobe.com/AdobeProducts/ADSR/11/win32/lces_designer_11_0_0_d_win.zip
     French http://trials3.adobe.com/AdobeProducts/ADSR/11/win32/lces_designer_11_0_0_wwf_win.zip
     Japanese http://trials3.adobe.com/AdobeProducts/ADSR/11/win32/lces_designer_11_0_0_j_win.zip

• How to clear the log messages alerts in the console em12c

  After installing em12cr3, I check the log of alerts via console em12c.

  so I want to erase that checked the messages, but I don't know how to do it.

  Please let me know

  Thanks in advance.

  Hi team,

  From the Console, you can try the following

  Connect to the Console

  Under the Enterprise-> Monitoring-> click the Incident Manager to go to the Incident Manager UI menu item and then click on the link ' open issues ' on the left

  Identify problems specific to your target.

  Click the problem link to view details

  On the right side, you should be able to solve the problem which will clear all Incidents related to the problem.

  or

  Go to the homepage of the target

  Click the menu level target and go to monitoring-> Incident Manager => click on all problems open on the left and identify problem here - click on the problem link to show details--> you should again see the clear option to clear the incident here

  Also you can check below metalink doc to understand what the Cloud Control measures can be erased manually if necessary

  REF

  What are the Statefull and stateless Metrics in Enterprise Manager - explanation and example (Doc ID 733784.1)

  Kind regards
  Rahul

• Get-MCpl / global platform, the mapping card Life Cycle

  Hello
  
  is there a any correlation between the response of get-MCpl and definitions of Cycle Global Platform car Live?
  
  I had a get-MCpl output:
  ------
  cm > get-MCpl
  = > 80 CA 9F 7F 00...
  (usec 12102)
  < = 9F 7F 2 a 47 90 50 40 47 91 81 02 31 00 83 58 00... * G.P@G... 1.X.
  11 68 91 45 81 48 12 83 65 00 00 00 00 01 2F 31. h.E.H.. e... / 1
  30 31 31 36 38 00 00 00 00 00 00 00 00 90 00 01168...
  Status: No error
  Manufacturer of IC: 4790
  IC Type: 5040
  The operating system ID: 4791
  Operating system release date: 8102 (11.4.2008)
  Version of operating system level: 3100
  Date of manufacture of IC: 8358 (23.12.2008)
  IC serial number: 00116891
  Identifier of the IC package: 4581
  Module IC manufacturer: 4812
  Module IC Packaging Date: 8365 (30.12.2008)
  Manufacturer of CCI: 0000
  IC incorporation Date: 0000
  IC Pre-Personalizer: 012F
  IC Pre-personally. Date equipment: 3130 (10.5.2003)
  IC Pre-personally. Hardware ID: 31313638
  IC Personalizer: 0000
  IC customization Date: 0000
  IC personally. Hardware ID: 00000000
  -------
  
  Somehow check in what GP card Live Cycle is my card?
  
  See you soon,.
  Max

  Hello

  It doesn't tell you the card life cycle State.

  If your card has too many authentication attempts has failed it will END.

  GP 2.1.1:

  The State FINISHED signals the end of the Cycle of life and the map card. The passage of the State by another State to TERMINATED is irreversible. In the FINISHED State, all APDU commands must travel to the issuer security domain and the issuer security domain must only meet the GET DATA command.

  You can try any other than GET DATA command, which must be authorized without a secure channel to see if the map is completed.

  See you soon,.
  Shane

  Published by: safarmer on 07/11/2011 13:08

• Setup error Oracle Service registry 11.1.1 with no release to clear the log

  I get the following error during the installation of the OSR, I am new to ORACLE can we all please let me know solution. The log file lists these vague lines. How can I troubleshoot it. I have Windows 7 and 12g of Oracle is installed. I created a schema user "OSR" as well. Can anyone help?

  ================================================================

  Java returned: 1
  Failed installation. If available, see 'C:\Oracle\Middleware\Weblogic\registry111\log\install.log '.
  For correct installation settings and the installation of curriculum vitae, click recovery.
  .
  #
  #Mon 22 dec 18:51:03 2014 PKT
  porting. Context = Registry
  DB. System.Name.condition = Oracle
  install. Server.Operator.Name = Oracle
  porting. WebLogic.deploy.Mark =
  Oracle.Server.Host = localhost
  install. Server.SMTP.port = 25
  alldb. Create.DataSource.Name=JDBC/registryDS
  porting. WebLogic.admin.Password = *.
  install. Server.SMTP.Password.confirmation = *.
  install. Server.admin.mail=admin@localhost
  install. OS.is.win.AndCondition = true
  Create.Desktop.Icons = no
  porting.support.multihost = true
  porting. WebLogic.Home =
  Setup.Skip.Marker =
  porting. WebLogic.deploy.type.condition = Domain
  install. Server.SMTP.default.sender.Name = NAB
  porting. WebLogic.admin.port = 7001
  install. Server.SMTP.Password = *.
  porting.HTTPS.use = no
  Account.backend.type.condition = Database
  install. Server.SMTP.title =
  alldb. Advance.condition = false
  install. Server.admin.Name = admin
  alldb. Create.DataSource.WebLogic = Yes
  install. Server.admin.Password.confirmation = *.
  Dist.version = 11.1.1
  install. [email protected]
  alldb. Create.DataSource = Yes
  install.type.condition = standalone
  alldb. JDBC. Custom.uribox = no
  install. Server.SMTP.Host = localhost
  Create.menu.Items = no
  alldb. Create.Drop.condition = Connect
  Oracle.Database.Name = ORCL
  porting. WebLogic.admin.Host = localhost
  porting. WebLogic.https.port = 7102
  install. Directory = C\:\\Oracle\\Middleware\\Weblogic\\registry111
  install. Server.admin.Password = *.
  Oracle.Server.port = 1521
  porting. WebLogic.http.port = 7101
  DB. ShowAll.condition = false
  porting. Server.type.condition = standalone
  alldb. JDBC. Custom.urifield =
  alldb. JDBC.drivers.Paths=C\:\\app\\nkhan\\product\\12.1.0\\dbhome_1\\jdbc\\lib\\ojdbc6.jar
  porting. HostName = Oracle - nkhan.xavor.com
  porting. WebLogic.admin.Name =
  porting. WebLogic.java.Home =
  porting.type.condition = weblogic11g
  install. Server.SMTP.Account.Name =
  Oracle.Database.User = OSR
  install. Windows.menu = Oracle 11.1.1 Service registry
  Oracle.Database.Password = *.

  [java] BUILD FAILED
  [java] C:\Oracle\Middleware\Weblogic\registry111\etc\setup\database.XML:785: The following error occurred during the execution of this line:
  [java] C:\Oracle\Middleware\Weblogic\registry111\etc\setup\database.XML:390: The following error occurred during the execution of this line:
  [java] C:\Oracle\Middleware\Weblogic\registry111\etc\setup\database.XML:207: The following error occurred during the execution of this line:
  [java] C:\Oracle\Middleware\Weblogic\registry111\etc\db\oracle\installOracleDB.XML:184: Java returned: 1

  [java] Total time: 3 seconds
  Java returned: 1
  Failed installation. If available, see 'C:\Oracle\Middleware\Weblogic\registry111\log\install.log '.
  For correct installation settings and the installation of curriculum vitae, click recovery.
  =============================================================================

  I had Oracle database 12 initially. I was not aware that Oracle Service registry currently supports 10g or 11g database. So, I uninstalled the 12 database and installed 11g. Then installed the Service registry and the fixed number.

• Clear the logs of Vm

  What is best/most sure way to remove additional Virtual Machine logs that are contained in the data store?

  For example, in April one of the virtual machines created apparently about 60 logs in a single day. I would like to delete those outside the data store if possible.

  It is safe to delete just the data store. In addition, if you don't need them anyway, you can activate them under Edit configuration-> options-> general (clear logs from vmware).

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• How can I clear the log of download?

  When you download something using Firefox, this little window opens, showing what you have downloaded. The button in the lower left corner does not. How can I make it work again?

  Hey CinkCD,

  It is a known problem in 19 depending on how you've set up your privacy settings. You can find details in this bug: https://bugzilla.mozilla.org/show_bug.cgi?id=842871

  It is set to 20, then you want to try Beta if it's really annoying!

  I hope this helps.

• Oracle diagnostic Log Analyzer ADF ask don't not showing life cycle phase JSF

  Hello

  I'm under JDeveloper 11.1.1.7 and run a web application through the Weblogic Server integrated. I'm trying to view the logs in the lifecycle phase JSF as they show in the Fusion of the ADF for 11.1.1.7 Developer's Guide (section 31.5).

  

  I see in the developer's Guide that you configure logging for these packages, I did: oracle.adf (Java: more BEAUTIFUL, ODL:TRACE:32), oracle.jbo (Java: CONFIG, ODL:NOTIFICATION:16), oracle.adfinternal (Java: INFO, ODL:NOTIFICATION:16). Is to show log for me messages, but not the life cycle phase JSF:

  

  What I have to to get the phases of life cycle JSF to show the value?

  Thank you

  Steve

  I realized my mistake. I had put the internal logging ODL for oracle.adfdtlevel to NOTIFICATION: 16 instead of oracle.adfinternal. Updated the log levels and now I get the phases of the life cycle JSF, and ADF.

  Steve

• I have 90% of disk empty hard drive space, but the error log is eating my memory... How can I clear the error log?

  I have 90% free or empty space on my computer, but my memory is full of error logs.

  How can I clear the logs for free my memory and find my speed?

  Hello

  Thank you for contacting Microsoft Answers.

  Too clarify unwanted newspapers, go to my computer-> select your system partition/drive (the partition where Windows is installed usually C:\)->right click for menu doll-> click Properties-> click on disk cleanup.)

  After a few seconds, the disk cleanup window opens. Select the categories of files that you want to remove, and then click Ok.

• Cant't save and clear the event logs to a folder on the hard disk

  I have a new hp laptop under windows7. When I try to erase and save the event logs to a folder on the hard drive, I get a message saying that it cannot save the file to the network location despite the fact that I'm not saving to a network location.  I can record the events first and then to clear the logs.  But can not use the option "save and clear."  What could cause this problem?

  Hello

  1 when was the last time save and clear option has worked?
  2 have you made any changes to the computer before the show?

  Run the System File Checker and check if it helps.

  Follow the steps in this link: http://support.microsoft.com/kb/929833