clicked "never allow" for a program to run. need to change this.

Similar Questions

• A software says I need 4 MB of VM set aside for the program to run.

  Original title: virtual memory.

  How to set 4 MB of virtual memory in windows xp? A software says I need 4 MB of VM set aside for the program to run.

  Hi KennethBrasel,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description provided, looks that you receive a virtual memory message when installing a program on Windows XP computer.

  By default, the virtual memory paging file that is created during installation is 1.5 times the physical RAM on your computer. Therefore, a computer that has 1 GB of RAM installed will have 1.5 GB of virtual memory.

  You can manually change the size of the swap file to make it larger or smaller. You can also optimize virtual memory use by dividing the space of files between multiple drives and by removing the disks slow or very open space.

  He would be grateful if you can answer this question in order to help you further.

  1. What is the size of your RAM memory?
  2 are. what program you referring?

  I suggest you try the following steps to change the virtual memory:

  a. Click Start, right click my computer and then click Properties.

  b. in the System Properties dialog box, click the Advanced tab.

  (c) in the results pane, click settings.

  d. in the performance Options dialog box, click the Advanced tab.

  e. in the virtual memory section, click on change.

  f. change the initial size value and the value of maximum size to a higher value, click on set and then click OK.

  g. click OK to close the performance Options dialog box and then click OK to close the System Properties dialog box.

  Note: With virtual memory, the computer can use the hard drive as memory (RAM) space. The computer uses virtual memory to increase the ordinary RAM that is installed on the computer. If you reduce the size of the pagefile, some the program may not start correctly or may not start at all. This problem may occur even if the computer has plenty of RAM.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• How can I go on my computer for my programs and run them one by one (individually)?

  Hi, how can I go on my computer for my programs and run them one by one (individually)?

  Original title: programs

  Sorry, I'm not sure I'm 100%. Could you clarify it please.

  for example, what programs you want to run?

  Most of the programs of supply to create an icon on your desktop when they are installed, in which case a click that. If this is not the case, the other place to look is the menu of your . Click on the round, and you should find most (if not all) your programs in there.

  Programs are also usually stored in C:\program files or C:\program files (X 86). If you access this directory/folder, you should be able to find the program there as well and click sound. EXE file. that is for works2007 - C:\program files\microsoft works\WksWP.exe

  To close a program sound usually in a menu, or the [x] icon red on the right top of the window.

• Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Take a look at the following article that may help you.

  http://community.us.PlayStation.com/message/2371488

  I recommend you contact Sony support teamfor further assistance.

• I have outlook express and the spell checker is for the French. How can I change this?

  I have outlook express and the spell checker is for the French. How can I change this?

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974

  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/

  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I want to send a page with gmail and it only allows me to use aol, how do I change this?

  The mail/mail icon hangs in aol, and I don't want to send a link or web pages to the front using aol. I want to use gmail. How can I change this? Please tell me step by step what to do. Thanks for your help.

  Could you try the steps in this article to support and see if they work for you: change the program used to open links in e-mail.

• Help! I am getting Application failed to initialize properly (0 x 0000142) for any program I run

  I have Windows XP Pro, I have 3 accounts on the machine, two directors and a guest (and not the standard guest account).  It started to happen three or four days ago.  Currently I use Kaspersky Anti-virus.  Any ideas?

  Hello

  ·         Have you checked the problem in safe mode?

  Try the following.

  Method 1: Start the computer in safe mode to check the issue. Report of the results.

  Method 2: You can run the Microsoft Safety Scanner to search for infection by the virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

• I accidentally clicked 'NEVER' to "Save password?" I REALLY want to save this password... (Thanks in advance!)

  I go to preferences / privacy / delete individual cookies.
  delete the ones in question; but when I restart, they are back once again!

  The Web site may use autocomplete = off to prevent Firefox to record the name and the password.

  You can remove autocomplete = off with a bookmarklet to register the name and the password of Firefox.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered
  • Saved password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

• With the new update my screen is not wide enough for the format. How can I change this?

  After the new update, the display shows only 3/4 of what is presented. I reduced the size of the print and that did not help. For example, typing this, once I had as "present" the due screen move to the left to allow me to see what I was typing. It does this automatically. I don't know what caused it in the latest edition of the update, but he made me a certain number of problems by acting on the Bank of line because no moveable windows do not show enough to allow me to hit the submit button.

  I want to see the whole window when I log onto a site. When I open now Yahoo News, for example, I don't see the last of three inches. I can see them if I hover over the page, but until now, I always saw the entire page when it comes to the top without having to take any action on my part.

  Where can I or how can I do to get it to how she still worked before?

  I opened the learning system and it refers to a tool of Mozilla bar which I did not either. Don't know if it of relevant or not.

  Hello

  Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution. There are several ways to solve this problem. See the Web pages are broad and fuzzy after update of Firefox - how to fix article for a suggestion. Here is another possible solution:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  This solve your problems? Please report to us!

  Thank you.

• Since the new update of Firefox, I am unable to open new tabs my clicking on the + box. Wondering what is needed to solve this problem?

  The tabs button + open not to when you click New tab.

  Try Firefox Safe mode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  The problems of Firefox using Firefox SafeMode

  When in Safe Mode...

  • The State of plugins is not affected.
  • Custom preferences are not affected.
  • All extensions are disabled.
  • The default theme is used, without a character.
  • userChrome.css and userContent.css are ignored.
  • The layout of the default toolbar is used.
  • The JIT Javascript compiler is disabled.
  • Hardware acceleration is disabled.
  • You can open the mode without failure of Firefox 15.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• My system won't open any link in a program to the internet, but rather opens the 'link' in windows 2010 as a word program. I need to repair this urgent problem.

  Example: When I click on go to update or verify the update I get a word version of the Web page.  He did not go to my browser and connect to the internet, as it has before.  I seem to have damaged Windows 7 in a certain way and need to fix it, preferably without wiping the entire system by doing a restore or recovery.

  Thanks to you all.

  Hello

  What program are you opening links?

  We will set Internet Explorer as the default browser and check if you can open the links.

  See the following links:
  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-in/Windows7/change-which-programs-Windows-uses-by-default

  Change default programs using Set Program Access and computer defaults

  http://Windows.Microsoft.com/en-in/Windows7/change-default-programs-using-set-program-access-and-computer-defaults

  After completing the methods suggested above, answer us with the State of the question.

• Hello! Is there a way to create a shortcut that allows you to toggle the checkbox "Allow pages to choose their own colors, instead of my selections above" located in Tools/Options/content/colours? I need to change this setting repeatedly and need to speed

  I looked for the Add - ons that could automate this configuration change, but nothing helped. Only actions of web page can be saved in a macro, but no change in configuration.

  A shortcut to access the appropriate dialog box would help as well. I could manually check / uncheck box saving all stages several necessary to get there. But I don't him not found anywhere.

  I thank very you much for any help you can provide me.

  Best regards

  Alex

  I have a checkbox on the PrefBar to pass this parameter (browser.display.use_document_colors).
  
  PrefBar can also assign a shortcut buttons and checkboxes.

  • PrefBar: https://addons.mozilla.org/firefox/addon/prefbar/

• some how under my slider and arrow for a magnifying glass, how can I change this? __

  Please help me solve my cursor

  "toby48036" wrote in message News: * e-mail address is removed from the privacy *...

  Please help me solve my cursor

  Turn the auxiliary button before your mouse...
  
  --

  Mike Hall
  http://msmvps.com/blogs/mikehall/

  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Accidentally by default of the same program for all programs

  I tried to open Dell Webcam central because it did not work. I have a click right and select open with, then select default opener. I have not noticed that the box that says something in the sense of "make default for all programs" was checked. Now any time I try to open any program, it opens the webcam.

  I tried to do the system restore, but received an error message about a file problem. He said to try to disable my antivirus, which I did and it still doesn't work.

  I tried to go back and select the default program for each program, but that does not change.

  Help?

  There is a cure, but it will probably a registry change to get there.

  Here are three links that might solve your problem. The first contains once also the other so if arrive you at the entrance to Amrita and use the link here to 'fix' you don't have to bother with the second link.

  Good luck

  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/6becdf43-28d2-4eb5-B3E8-a7fcd0b5c69b/

  http://support.Microsoft.com/kb/950505

  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

• HP dv5 first recovery disc loaded, but never asked for the second

  HP Pavilion dv5t-1000, p/n KQ574AV Windows Vista 32-bit, I have a set of recovery disks that I made before I started using the machine.

  Yesterday, my laptop froze during the download of reader photos.  System rebooted to a black screen with cursor flashing at the top left.  Removed the battery & power cord; power button down for 15 seconds; restarted the computer to another black screen.  Repeated several times.

  A disk failure hard while slot guaranteed 2 years, including fixed hp.  On the keyboard Panel, the three before white lights: power light, lightening bolt not away and hard drive/array turned on & strong flashing.

  The recovering of the disks and rebooted the computer.  "Windows is loading files...". ' First disc ends, but computer never asks for the second recovery disk.  Screen changes from black to blue.

  New message: PC it is not supported by the system recovery discs.

  You will not be able to continue to recover this system with disks.

  Can someone help me please!

  Hello

  Ok.

  If you get a disc error, then it would seem more likely to be a hard drive failure.

  View the results you get on the test drive.  If your drive is failed then try to restore or recover simply will not work. A replacement hard drive will be necessary.

  You may be able to recover your data on the disk by putting it in an external enclosure and connect to another Windows PC.