Client systems disappear in ITA

Similar Questions

• Display Date/time of the Client system

  Hello

  The requirement is to display the report run date/time in the result. (Report is developed using Excel template)

  Following syntax would give me time of the server where BI Publisher is installed.

  <? xdoxslt:SYSDATE('DD-Mon-YYYY_HH24:MI:SS')? >

  But, users would like to see their client system local date/time. There are several users running the report to several time zones.

  Any help on this is much appreciated.

  Thank you

  Mani

  before =)

  What is values of $_XDOLOCALE and $_XDOTIMEZONE, then you run the report with or without the user preferences?

  can you please check and share the result

  Add these variables to test the output of the report and please post on its values

  so, if the values of the variables are picked from the user's preferences, you can simply use

  If the values are the values of server beep then, as of ideas,

  -some additional report parameters (can be hidden) dynamic picking local / zone by other additional tables as user/local/zone schedule

  (intermediate table to store the preferences of users - custom extension)

  so, you for certain user values in this table, then you can set their default values for the parameters and pass to the generation of reports

  If missed - use beep server settings

  - or post SR to take over the team, already can be a useful way is existed

• netframe4 client system crash

  Since the client netframe4 download my system crashes.  I tried to repair and reinstall but still keeps happening.

  Under XP and Norton internet security 2012.  All installed uppdates.  Of course simple answer is to take it but I have an application that needs it.  I took the application stop just in case that was the drink problem still continues to be.

  All ideas

  Thanks for your help.

  Hello

  1. which edition of Windows XP is running on your computer?

  2 are. what application you referring?

  3. you receive an error message?

  You can check the system requirements for the installation of .net Framework 4 client.

  .NET framework system requirements

  http://msdn.Microsoft.com/en-us/library/8z6watww.aspx

  You can also check if the problem exists in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a.Click Startand then click run.

  b.Type msconfigand then click OK.
  The System Configuration utility dialog box appears.

  c the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  d.When you are prompted, click restart to restart the computer.

• Web client - System Configuration node displays 'Unknown' for the Uptime and the workload, no value for IP &amp; Hostname

  When I connect on our vCenter 6 Update 1 device (embedded PSC) via the Web Client with integrated Active Directory ID, select "System Configuration", then select the node for vCenter, summary screen displays all the information IP or host name.  In addition, the status of availability and workload for storage/memory/swap/load of work view all 'unknown '.  See attached photo for reference.

  All values under management-> settings are also empty.

  When I login with [email protected], all the above values are displayed and I can change the settings of the device of vCenter as expected.  This made me suspect a permission problem exists, but I cannot know what SSO group to add our AD is less to enable management or control of the aircraft from vCenter for that it works as expected.

  Already tried to add our accounts to the following groups in SSO under the vsphere.local domain:

  DCAdmins

  SystemConfiguration.Administrators

  ComponentManager.Administrators

  Directors

  This information on the purpose of each group unfortunately did not help me understand which could apply:

  Groups in the field of vsphere.local

  Thank you very much for the help!

  I just did some digging on this myself (we deployed now U2 6.0) after I tried the same things (adding AD users in the SSO domain groups, etc. etc.) without success.

  What I have found is that it is simply a WELL-KNOWN PROBLEM with 6.0 U2 and maybe they'll fix with U3 6.0 when that comes out (later this summer)?  Maybe it'll be 6.5 at that time, with an announcement to the VMworld 2016 or something - who knows.

  The workaround is a joke--suggesting the deployment using only the SSO domain by default.  Well, which is never going to happen naturally, so he says as a workaround is, if you really need to get and display status, etc. from the web client, you simply connect with your [email protected] account that was created at the initial time of installation.

  VMware vCenter Server 6.0 Update 2 Release Notes

  *****

  Failed to configure and view information about the vCenter Server Appliance by using the System Configuration page in the Web Client vSphere with errors
  Connect to the instance of vCenter server in the vCenter Server Appliance with a user who is located in a custom name (different from the default vsphere.local) Single Sign-On the field by using the Web Client vSphere. On the vSphere Web Client home page, click on the System Configuration and select nodesunder the System Configuration. If you try to change the settings, restart or power off a node of the vCenter Server Appliance, the operation fails with one of the following errors: An internal error has occurred - Error # 1009 and Not authorized to use this API . If you click on the summary, monitoror Manage tabs, some device information cannot be displayed.

  Workaround: deploy the vCenter Server Appliance by using the domain of Single Sign-On by default: vsphere.local.

• ThinkVantage Active Protection System disappeared after Win 8.1 upgrade

  The ThinkVantage Active Protection System has disappeared from my ThinkPad after update to 8.1 Win.

  I was going to reinstall it from the Lenovo ThinkVantage page but the 64-bit version of Win 8 is not available for download.

  Curiously, the 32-bit version is available.

  This is a temporary situation?  Will there be a version 8.1 Win?

  Lenovo would anyone explain what to expect?

  OK, Active Protection 64-bit to win 8.1 is now available for download and works great!

  I guess I panicked and thought that Lenovo would leave supporting this excellent tool (it's happened)!

• 4 error code when a client system tries to access a USB flash drive

  I recently installed Windows XP in a guest operating system, using Workstation 6.5.5, but I am not able to connect a USB device to the host (8-64-bit Windows) system.   I have another desktop computer with a 64 bit Vista host and a Vista 32 bit comment system where it has never been a problem.  There must be a setting that I can't find which would allow this simple task off a flash of the host drive and its connection to the host. Under settings, I allowed to recognize all USB devices.

  Gordon

  Houston, Texas

  If the host system's USB 3.0 so as a workaround you may need to buffer the USB device between the host and he with a Hub USB 2.0, then the comments of Windows before Windows 8 OS should be able to access the device.

• Guest operating system disappeared after a reset configuration system ESXi

  I use ESXi and injury I have reset the Configuration System.  I then had to set up the network again once I did.  Same everything. I got the 2 virtual machine on the ESX box and now I'm not able to see the virtual machines under ESX.  Although I can see in the data store that are all the files.  How can I get that back?  Thank you.

  in the data store browser, right-click on the vmx file and add to the inventory

• System Analyzer of the customer in the clouds control 12 c does not show the successful configuration of the client

  Hello

  I'm testing this feature, I found these days in our new 12.1.0.2 deployment of oracle cloud control. When I navigate to Enterprise-> Configuration-> Client system Analyzer. I click on the link Https://servername:port / em/public/ecm/AAFC/AAC of the link example. It shows that a collection of configuration was collected successfully and the data sent to the server. Before continue explaining just to elaborate on we had which was originally confined file exceeded that I fixed it using the oracle support article 843903.1.  I then try to navigate Enterprise-> Configuration-> customer configurations. It shows that nothing has been collected. Is that what I'm doing wrong is there steps I need to do other than the Start button on the page 'Client system Analyzer' earlier that documents are not really clear about this.

  Thanks in advance for your help.

  
  Kind regards

  Fernemont

  It seems that it was a bug. If someone is also having the same problem that you will need to download the Patch issue: 17743138

  Kind regards

  Fernemont

• Audio has suddenly disappeared

  I moved our computer from one end of the room to the other. I've never had any problems before when I moved the computer but this time, all the sound elements disappeared. The computer says I have my speaker system disappeared. I restored the system, but that did not help either. Any suggestions? Thank you

  Renocat:

  You will need to re - install your audio drivers.

  See you soon,.

  Jerry

• PIX515-E DMZ clients struggling with WAN web pages

  I have a DMZ behind a PIX515-E configuration that can not display web pages on devices that are managed on the external interface of the firewall. Clients can communicate with the controller without problem, except when the web interface on the PLC is requested. I tested with my laptop on the outside and the inside of the PIX. I get the same problem on the inside as the client systems, but the pages are well outside. I studied it to know what I can do and have found nothing that will help you. I can shoot a web page running on IIS from the inside without any problem. Set up rules to allow IP, UDP and TCP destination and service everything for each value have all of the automaton. No syslog messages appear when customers try to access external web pages. Any suggestion will be highly appreciated.

  You may need to try to increase the length of bytes of dns by default in pix, 512 MB is the size by default, increase it to 1024 and see if it makes a difference. I've seen similar issues which increases, it solved.

  PIX (config) #fixup protocol dns-maximum length 1024

  http://www.Cisco.com/en/us/docs/security/PIX/pix63/configuration/guide/fixup.html#wp1063720

• Windows 7 missing icons in system tray

  My icons of toolbar State system disappeared about a week or two after I have my laptop. When I go to restore them or turn them on my computer tells me my administrator has them turned off and I cannot turn on their return.  I AM THE ADMINISTRATOR. I'm the only user on my computer. Can someone help me? How can I make my computer understand that I am the administrator? I've never disabled icons. I just got my computer on one day and they were gone!

  Try to rebuild your icon cache:

  (1) close all programs
  2) click Start, then type 'CMD' (without the quoatation marks) in the search programs and files engine
  (3) then right click on the CMD program that appears in the list, and then select: run as administrator
  4) access: C:\Users\\AppData\Local
  (at the prompt enter: CD /d %userprofile%\AppData\Local now, press the "Enter" key)
  (5) now delete the IconCache.db file as follows: DEL IconCache.db /ah and press the enter"" key.
  (6) close the command window.
  7-restart the computer.

  J W Stuart: http://www.pagestart.com

• You are looking for a Client Installer Stand alone creative cloud

  We are looking for a creative Cloud Stand Alone Client Installer.  We would like to avoid having to download and install it on each client system.  Or I can capture download some how?  Download the current Installer installation in the system somewhere.

  Thanks in advance for any help you might be able to offer

  Ed

  Hello

  If you are using the creative tool packer of cloud, we will build a package depending on the applications you select, and the Desktop Application creative cloud for deployments of user name (login with an Adobe ID). CCP is available from the portal of the teams, site licenses or the deployment of the Enterprise Dashboard tab.

  Adobe Creative Cloud package

• Role assignment of the system administrator to a new user in OIM 11 g 2

  I am trying to assign full access as xelsysadm to a newly created user, but not able to. Unable to identify the possibility to add the system administrator role. Admin system administrator role there is no SUPERIOR organization and we cannot create a new user at the TOP. any suggestions would be helpful.

  GoTo-> organization-> search and select high organization of the page-> open from the page detail->, Admin role-> select client (System Administrator)-click-> click the Assign button-> select user and add-> finally click OK.

• Create directory on the client side.

  Hi all
  I created a directory on the client system to the user, which can save files in this directory and load the data from the user interface in the database table. But the directory created on the server side. and there is an error produced than found directory on SYS. ORACLE_LOADER.
  Please solve the problem? I want to create directory on the client side only and no problem.
  
  CREATE or REPLACE DIRECTORY PRAD_DIR as "C:\abc." -Create server-side
  
  Thanx.

  A "DIRECTORY" is only accessible by a Server process, so the physical directory must be present (or accessible) on the database server.

  Say you are using a database of 11.2.
  The client might be
  SQLPlus 9.2, 10.x, 11.x
  SQLDeveloper x.x
  PLSQL Navigator / TOAD x.x
  Another base 11.x 9.2 - access to the database target through a DBLink
  Any other 3rd party Application Server / Client JDBC

  Oracle cannot guarantee that each of these clients can access a "directory" in the same way as a process server.

  So: A DIRECTORY cannot be on a client.

  Hemant K Collette

• Recommended email system

  Hi, I need a professional recommendation on what is the best practice in dealing with our clients system emails.

  I ask this because BC create all workflows and emails of the system with details of the partner, which I think is ridiculous.

  Then, you have to go and change all these e-mails to the e-mail client. I realized recently that BC have a default email setting system emails. I've changed all that to my e-mail address of the customer, but still I get the investigation and they get somehow my name.

  It's very embarrassing and I can't wait to see what happens again. Can anyone help me please with what are the procedures that I must take to avoid this problem.

  As partners usually let us ourselves as administrators and receiving each workflow of our customer receives? What happens if you have 100 clients?

  Shouldn't BC add a "BC" partner users? as a super administrator in Joomla instead of with the other administrator?

  Thank you

  Michel

  Hi Michel,.

  The system is a framework regarding the elements of the site, so of course, it will have the default information you can choose to change or not (for example, workflow).

  Regarding the forms and notification emails:

  S ' ensure that you update forms and email notifications

  S ' ensure that you update e-mail notification for mailing lists

  -Make sure the mass exchange for e-mail system is applied and you choose the correct model if you want to, for each of them.

  For Workflows:

  -The system comes with a few basic and of course you can build your own.

  -Normally, the thing you can do is change or add your customers to their own role as 'busines admin name' or 'users' for example. You can have multiple users and have multiple roles. By virtue of new permisions interface control what they see and have also gives access.

  -Workflows are on you to test mainly, allowing you to get the workflows and notifications by e-mail when you expand to see how things take shape and working.

  -Go in workflows and modify them so that emails / txts / steps to go to the right people.

  You can find more information if you need for the flow of work in the base of knowledge if you not gone through them already.