clip with mouse_over problem

Similar Questions

• 4 GB Clip with major problems - advice?

  I have a 4 GB Clip silver - he got in November last from Amazon and have enjoyed most of the time.  My only issues before today were random freezes especially at the end of some MP3s (usually 3 or 4 songs out of the 4 GB would freeze the unit whenever they were played).

  Today I load titles from XP machine (using the mode it is drag and drop/explore type) and got a "file of cannot be replaced on the device.» You are not allowed to create this element"message after successfully loading ~ 3 GB of music.   Did not have time to diagnose (apart from a few reboots of the player and my CPU) so I used the Clip for a few hours today, when he had what I thought, it was a typical random freeze.  I'm going to turn on it and all it says is not "enough space for music DB.  Please free 30 MB. "Strange, because I'm sure I had at least 700 MB free and not to mention the fact that I was using it just for a few hours.

  Have a very practical processor Vista I Plug and it is not recognized correctly.  The drive doesn't appear after 15 minutes of freezing Vista - then freezes my CPU when I try to click on it.  I tried to adjust to contain and pressing the Center button while connecting and who did nothing.  I can't do a soft reset as the Player stops immediately after the "not enough space for music DB.

  I just have to try it out on the XP machine - and it takes about 5 minutes to show as a player.  Click on in and after 10-20 minutes, I get this message - "G: / is not accessible."  Beeper has timed out. »

  Is it time to RMA it?  This device has a 1 year warranty?  Thanks in advance for any help.

  I could never make the Clip for you connect to my XP machine.  After dozens of attempts on my Vista computer with lock up ranging from 10 to 40 minutes to an hour trying to access the Clip - I was able to do a quick format and restore my Clip back to normal.  Strange, I wonder what's happened.

• I'm having a problem strange sync my 4 GB Sansa Clip + with Winamp

  Sansa Clip + 4 GB

  MTP mode

  MicroSDHC 32GB

  Windows 7 64 - bit Winamp (no additional plugins)

  I recently bought a new 4 GB Sansa Clip + with a 32 GB MicroSD card. Using Winamp, I synced my library on the SD card. Everything went as not expected, no problems to report, I could play all the songs perfectly.

  But now, whenever I try to sync the SD card in the player, Winamp does not appear to recognize the files he had previously synced. A window tells me that there are X number of songs on the Sansa Clip + who are not in the library and encourage me to remove them, let them, or cancel. (photo of the box below)

  

  Basically, Winamp tells me again and again to remove and re - sync a load of songs that are already on the player, which is extremely long and tedious, when all I want is to synchronize an album or two. This happens even if I plug the appliance, let it cool off, and then plug it back to synchronize again.

  If anyone has had this same problem and would be willing to share the solution, me a huge favor. Thank you.

  Nevermind, I figured it. It turns out that the solution was to set the USB MSC instead of MTP mode. Who would have thought?

  Thanks for any help.

• Merge the problem of clips with replacement of sequences of proxy

  Hello

  I have problems to find a solution to a problem I have with the merging of the Clips feature in Adobe first Pro CC.

  I am currently working on a tool for editing using sequences of proxy which I intend to replace after locking picture for color and export. The project was registered with dual sound, so my intentions were to synchronization and merge all the images in the proxy edit for an easy workflow and then replacement all clips with the original source files prior to export.

  The problem is that when I replace proxy images in the first, the merged clips don't update.

  If someone knows a solution or the solution please let me know, because my workflow would really enjoy being able to use clips of fusion, but only if I am then able to replace the images easily with the source files.

  Thank you

  Aaron

  If someone knows a solution or workaround...

  Do not use a proxy.  Use the originals of sufficient quality for final export intermediaries.

• How to read video clips with LabVIEW in Windows 7?

  I already had the opportunity to play a video clip of my LabVIEW program.  Now, with the same program in the two operating systems, Windows XP and Windows 7, both versions work, but the version of Windows 7 will not be saved.  Trying to save it, I get the following error message: "generic error of LabVIEW.  Cannot save VI... LabVIEW Save 3 error code: FP bunch. "A 2010 version with this problem sampling program is attached. Any help would be appreciated.

  Try this VI.

  It seems that you have a video ActiveX component is corrupted.

• In Movie Maker 6.0 can a video clip (with mute) be spliced in another video clip so it seems to work with the original sound of the first video?

  Hi, I put a video together for my MOM to 70th and one of her friends has provided a video clip of her playing a classical piece on the piano for several minutes.  I would like to cover this clip with other video sequences (landscapes, etc.) whereas the way piano since the main video track in the background.
  I tried to let fall the piano video file directly in the audio editing panel and then cut a second 20 segment in the video editing and insert a 20 second video (mute) images of landscape. However, the piano audio from the first video stops as soon as the strike chronology inserted piece landscape and picks up again when it ends, even if the audio scenario shows the audio piano continuously?  Am I missing a step or is this not possible?   Thank you very much.

  It should work quite as much as you described in Windows Movie Maker 6.0 (WMM 6.0), then maybe there is a step that is missed.  Let me describe how I could do and see if there's something you overlooked.

  First of all, I assume that you have already imported the clip of piano and your other clips of landscape in your collection then you can drag the there where necessary.  First, drag the piano music to the track Audio / Music in the timeline panel.  Note that if you have your video extended timeline, it will show video, Transition & Audio, but you want to get off- below that, to the Audio / Music , to follow.  At this point if you play your 'film', you should not to see any picture but just to hear the sound of the piano.  You should also only see a waveform on the audio / music.

  Now you can put anything you want on the video track.  Let's start by putting another copy of the original video of piano, but this time on the video track.  If you have developed the video track (to see the Vidéo/Audio/Transition) you will see the video piano and its associated audio waveform.  However, in your case, since you already have the audio separated, you want to cut that his partner.  Right-click on the Audio (attached to the video) track and select Muteor use the menus (Clip > Audio > Mute).

  When you preview the project, you have synchronized video browsing with the original copy of the audio piano.  At the point in the video where you want to replace the video with another piano play, making a split (key M).  Make another split at the end of the section.  It is very import that select you the video track when you add new divisions and you have not also be divide the track Audio / Music .

  Important: You want to make sure this divide the part that has the exact duration as well as landscape images, you want to replace.  So if you have 20 seconds to add, you divide 20 seconds piano images.

  Right-click on the part of piano footage (video track) and choose Remove.  Then, insert the part of sequences of landscape (also on the video track) in its place.  Once again, you will have need put this added sequence muted landscape (Clip > Audio > Mute).

  You should now see and hear the piano play.  Without any change in the audio playback in the preview window should implement the landscape images, then returns to piano images.

  If you find that your project is not behaving correctly after these splits, but are you sure that you have followed these steps, it could be a problem with your video file types.  If in doubt, try to convert all your videos to .wmv format using something like Freemake Video Converter (freemake.com)

  In any case, I hope that you are able to achieve, because it is certainly possible.  Good luck and post back with further questions or information, you can have.

• Update the clips with Alpha channel does not work after August 2016

  It's really random, I have a bunch of Silhouettes of Motion Designer of Digital Juice in my current project, and after the last update, none of them appear in the monitor of the composition. The clips are still there. Nothing is changed. But none of the Silhouettes. They are Quicktime video files with alpha and have the silhouette of a person to perform various tasks.

  They are not involved in After Effects and first.

  I have also a few clips with alpha explosion on my calendar. Those who still work, but they are not as vivid and intense as they were before the update.

  Help? All advice would be much appreciated.

  all the information I have shows that there is a bug in 13.8.1 on some OS systems. What is yours? It mainly occurs on Windows 10 and a few BONES. the solution is to uninstall quicktime or working with the version 2015.2. Have a look here:

  Re: New update broke PNG .mov format

  Color of EI error/bug on PNG + (codec)

  Problems with fire and muzzle Flash Active

  Re: AE interpereting not color values

  Layers of color to Alpha. MOV shifted on reopening program

  Re: Images of channel Alpha displays incorrect colors. Need help ASAP! I have samples

  a shared sorrow is a reduced sentence by half

  Why what happened? My guess would be that it comes to this

  

  Source: update is now available from effects CC 2015.3 (13.8.1) Bug - Fix | Creative blog Cloud by Adobe

  Please file a bug report and also a link to this thread: feature request/Bug Report Form

• Make a group of clipping with a compound path

  So, as of today, I am new to scripting for Illustrator, I use the ExtendScript Toolkit. However, I am not new to my own script solutions and I do not have any experience with JavaScript.

  What I'm trying to do is the following: for all selected items-> duplicate selected item and make a group of simple clipping with it

  What I'm left with visually does not change the picture, but gives me a lot of clipped colored areas that I then can I change in isolated mode, which allows me good shading faster and better. That the doing by hand takes hours on some pictures, it would take a second with a script.

  The script itself is already works for normal PathItems. As evident in the title, as soon as I have to apply the same thing to CompundPathItems things stop working. My question is a bit like this old thread [problem with clipping path transparent], but I couldn't find a solution because I get different behavior.

  When I run the same script that works perfectly with the normal PathItems with CompoundPathItems I get this: 9046 error: the top element in the group must be a path element to create a mask

  Well, it's a problem. There is absolutely no difference between making a clipping with a simple path mask and a compound path in the GUI. Frankly reference guide not helped with this problem at all, the only thing that I learned from it is that the CompoundPathItem object is an attribute of cutting, but those included PathItems.

  Here's what I have so far:

  
  

  	If ([i] selected. TypeName == 'PathItem') {}
  	newGroup var = doc.groupItems.add ();
  	copy is selected [i] .duplicate (newGroup, ElementPlacement.PLACEATEND);.
  	Selected [i] .moveToBeginning (newgroup);
  	newGroup.clipped = true;
  	}

  As I said, this part is exactly what it is supposed to do for normal paths.

  For CompoundPaths, I use this work around.

  	If ([i] selected. TypeName == 'CompoundPathItem') {}
  	newGroup var = doc.groupItems.add ();
  	copy is selected [i] .duplicate (newGroup, ElementPlacement.PLACEATEND);.
  	Selected [i] .moveToBeginning (newgroup);
  	compoundItems = selected [i] .pathItems;
  	compoundIndex = compoundItems.length;
  	for (f = 0; f < compoundIndex; f ++) {compoundItems [f] .clipping = true ;}
  	var lineList = new array (10);
  	for (l = 0; l < lineList.length; l ++) {lineList [l] = new Array (I * 10 + 50, ((i-5) ^ 2) * 5 + 50) ;}}
  	newPath = app.activeDocument.pathItems.add ();
  	newPath.setEntirePath (lineList);
  	newPath.moveToBeginning (newGroup);
  	newGroup.clipped = true;
  	newPath.remove ();

  Mind you, this workaround works in so far that it ignores that annoying error and evil and composite clipping path also works with the only problem being that created composite clipping path as it is always displayed in its original colours in the layers section and is always selectable. When I lock the composite clipping path I can work with it, but still...

  So the question is, what am I missing here? Surely, there must be a good way to do this.

  app.executeMenuCommand ()? That is me away so far, might be just the right thing. I will definitely take a look, now just to find a ref about it, because unfortunately official documents Ref I do not mention this command. Any place with a list of possible commands?

  Ah, also of course I only do for the isolation mode. If you care to hear the background, it is here:

  As I said it's for photos of shading, I'm working on. I repeated and tried through a bunch of techniques. For example, gradient mesh on my first few true works. Now these cracks don't do well with complex shapes, which previously I mitigated by using a simple square or rectangle gradient mesh and using the original form as a color clipping mask. It worked, but it was a huge field of work.

  After a lot of attempts that I went to the use of simple gradients as a background for the form, and then I do the shading freehand with the blob Brush tool, using a graphic style and filters to make it look like to the right. Is better, but do it right all the clipping masks takes me much more time than anything else.

  Now the problem is that shading is not supposed to cross the lines, it's impossible to do correctly without messing up the order, either using clipping masks, where the script. Because you know, if you use a form of the task with a strong Gaussian blur near the lines, you'll find yourself with stuff on both sides. If you do not start close to the line that the shading will be not look right if the darker the shade needs to be close to the line. And that's where magic of clipping masks.

  And finally, here's an example of how I work with the script and the result:

  After that I drew a sketch, adjust the line widths and at the neatness I turn the paths to sketch the lines and then turn them into a live paint Group (which would ruin the line widths, unless you put the paths in first contour lines).

  With this live paint group need me a few minutes to color my piece dish. Then I develop the live paint group, in case of doubt, spend a few more minutes to make transparent traces of all regions, I need the shadow in one piece, and then I select all areas and use my script to activate the neat clipping masks. Then I can click on any field, enter the isolation mode, and go up one level, so I'm in the appropriate group, where I can shadow freely without the problem beyond the lines.

  At the end which allows me to apply shading complex and comprehensive, without wasting time to get there.

  PS: well, I just found out that draw inside is really close to what I want to do, and oddly enough, it produces the same Visual discrepancy with transparent traces that produces my script. I'll take a closer look that, while my script is a little more than just the stuff of clipping mask, so maybe I'll go for a hybrid solution. Everything that makes for a better workflow.

• How can I replace the same clips with the same interval of time (same settings)?

  Dear Adobe Premiere CS5 Forum,

  I have the following problem, and I would look forward to receiving solutions:

  As I couldn't cut my video with clips in avi codecs (it is very difficult to cut in avi codecs, except that you have a very fast computer), I converted my raw clips in lower codecs. Then I cut my video in low quality codecs. My video is now ready to export.

  But before I want to export my video, I need to replace all the clips in avi codes so that my video is in good quality.

  Now the problem:

  How can I replace the clips (poor quality video codec codec avi), in order to have the same clips in a different codec always the same interval of time. I want the replaced clip immediately have the same interval of time.

  For example: a raw whole clip takes 2 minutes. But just a part / interval of the clip (from 01:00 minute 01:10 minutes) is shown in the video. Now I want to replace this clip with the same clip in avi codec. But it must be the same interval (from 01:00 minute 01:10 minutes).

  I tried to replace a clip. But they each have a different time interval (the lower quality clip is from 01:00 to 01:10 minutes and if I would like to replace the same clip in avi codec is the time interval between 0:00 to 0:10 minutes).

  How can I replace the clip with the same interval of time?

  Thanks in advance

  Leonardo

  Hold down the Alt + Shift; It is Shift that maintains the reference timecode. In addition, this will work only if your proxy clips contains timecode. If they all start to 00:00:00:00, this will not work for you.

• How to combine left half a clip with right half another

  My situation; I'm filming me as 2 characters in 1 shot.  I have 2 clips with the same game.  In a clip, I am sitting on the left, in the other, I sat to the right.  I would like to combine them into a single element where half a clip left combines with half right on the other.  It is slightly different from the next, cutaway and image in the image.  Is this possible in imovie?  Help appreciated, thanks.

  Hi, Paulways,

  You will not be able to combine half a clip with half left right of the another clip using the cropping features of iMovie video.    However, you may be able to do it using Quicktime.  What you need to do is to crop each clip so that it plays in less than full screen.  In other words, a clip that you just want to the left to play and the other clip just on the right side.  Then you could combine clips in iMovie using side by side.

  Before proceeding to any culture, first you want to duplicate your clips and work with the duplicates if you keep your original recordings.   Once you've duplicated, try the following steps on each clip using Quicktime to crop on the right or left side as needed:

  

  Now you should have two clips, one that plays only the left side and one that plays only the right side.  You should be able to import it into iMovie and use the side by side feature combine them seamlessly.   At least, I think it works.

  If you try it, let us know how it worked.

  Best,

  Rich

• Verizon said I can be faced with one problem with my browser and don't charge but ATT, gmail and other

  Tried loading Verizon homepage, but it says I can be faced with a problem with my browser. ATT, gmail between other fine load and Verizon was very well for some time now, what should I do? I'm not tech savvy so please keep it simple for me, thank you.

  Try to clear your browser's cache.

  Firefox button or tools > clear recent history... - details and of course Cache hit only is selected, and then select all and click the clear now button.

• Presario SR1463CL with drivers problems

  Please be tolerant of beginners.

  I purchased a SR1463CL to add to a DELL Dimension - old but never fails. -the HARD drive was crushed. I replaced the HDD Samsung with Western Digital. I have replace the dial-up modem. All this without problems. I installed Windows XP Pro and SP2 update. My system detects "New hardware" drivers VGA Compatible and multimedia controller. I have had no success finding the right drivers and their installation. My monitor works find, but I have no sound.

  Poster 'sounds, video controllers' Device Manager with the problems. Initial device showed sound and audio by default to the Modem. I removed which and at this point no device is indicated.

  Device Manager shows no driver found for new hardware and online search has failed. Windows Update detects any is available. I checked on the resource one manufacturing line have failed in my downloadsfrom RealTek and Nvidia.Dial - up has had major periods and material has been identified as there's no way for the system. Previous owner had made the back-ups-DVD-but they went "purple haze" and could not be read. That's why I installed XP Pro.

  My modem does not work on and additional time. It will connect and funtion but after a few minutes I'll get "Page not found" displayed.

  So, I use my Dell Dimension for internet troubleshooting. Any help is greatly appreciated.

  Respectfully.

  "Submariners do it deeper."

  Thanks for the information. Due to serious conflicts resulting from auto-updates from microsoft, which I had to reformat the HARD drive and have located since the necessary drivers to the www.sis.com for VGA and www.realtek.com for audio AC 97 readers to be precise. Manually review and choose downloads in the future.

  "Greens, all councils prepare to dive."

  Thanks again for your help. It is greatly appreciated.

  Bamabubblehead went to the abyss.

• My macbook air running hot and the battery drains quickly can help you with this problem?

  My macbook air running hot and the battery drains fast is a 13 ", at the beginning of 2014.  Processor 1.4 GHz intel core 15Can you help with this problem?

  Apps can affect the performance of Mac, battery, temperature and fan activity - Apple Support

• just installed new update for itunes. When I go to the page stoe it flashes really hurt. anyone with this problem. is there a solution?

  just installed new update of itune. When I go to store the page, it's really bad flicker.  anyone with this problem. is there a solution?

  Widely not reported, no known resolution until Apple release a new version of iTunes that affects it.

• two drivers of PXI chassis with Configuration problem

  Hello

  I have two PXI chassis. One is PXI 1033 and works perfectly with the NI PXI-5404, 5105, 6509, 1409, installed 8336. The other is 1036 PXI with the PXI-5404 NI, 8366 installed. When I was trying wreath connect, as master 1033, 1036 as slave, I found several problems.

  1. in the Measurement & Automation Explorer, does not have my good guys in 1033. Instead, there is a sign of the Red Cross in bottom right with 6509, 5105, 5404.

  2. I can't find an another 5404 of the 1036. In fact, I can't find 1036 in MAX.

  Update BIOS. My PXI system is already identified under the name 'NOR PXI - 1033 Embedded MXI Express' and Chassis1 is identified as 'NOR PXI 1033'.

  So I made several tests as below:

  1. unscrew the 5404 1036 slave. MAX can configure 2 1036 chassis. Ok. But when I reconnect 5404 in 1036, same result happened as stated above.

  2 uninstall the driver of 5404, so the 5404 in 1033 does not either now. And then reboot again, same result happens again. Cannot detect the 1033 chassis. Other vouchers in 1036 don't work either.

  Please, any suggestion is highly appreciated.

  Sincerely,

  Bin

  Hi Ben,

  This happens sometimes with MXI-Express:

  Error code 12 with MXI-Express

  http://forums.NI.com/T5/PXI/two-PXI-chassis-connection-with-configuration-problem/m-p/1475876#M9033

  In general, you can read this error 12 means on Device Manager:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  If it was a problem of bandwidth, PCI or PXI side, you could pull a few cards to see if that alleviates the problem, or that the link from Microsoft over the States, you can disable the driver for other cards.