Clipboard support in the Source monitor

Similar Questions

• When I stop playing, the source monitor goes black. It does not show a still image after pausing.

  I just got a HP Prodesktop 400 G1 MT, Intel core I7 processor. In first 8 adobe, when I stop the video playback, the source monitor and program monitor won't give me a fixed image. As soon as the video is stopped, the screen is empty while normally, they would be in a freeze frame. the computer has an AMD radeon graphics card. I have two pc for dual monitors. I tried to play with the settings of reading to the premier, but no luck. I'm about to take the computer to be recovered. Any suggestions?

  Hello! Thank you for responding. I'm currently doing an update for my AMD display driver, and it is up to date. I called tech support and they helped me in the question of fixing from the option menu file - rendered video - general - project settings and playback - selecting mercury playback engine software only option. My computer was set to the GPU acceleration engine. It works fine now. Thanks.Aldo

• Playhead snaps to the Point in the Source monitor

  I work with the new version of first CC and when I play or scrub the clips in the Source monitor he always snaps to the Point. It is hard rub the clip to see if I need to extend the entry point when he keeps back alignment. It seems unnecessary to always erase the In/Out points each time. I've never had this problem before...

  Thanks in advance for any advice.

  Hi buckyi,

  Seems like you "Loop" enabled in the settings of the Source monitor.

  

  Turn it off and see if that helps.

  Best,

  Regalo

• Could not get the Source monitor and program to display together

  Hi, I use Premiere Pro constantly for about 6 or 7 years and have never had problems with the monitors Source and program appearing side by side in my workspace.  I've recently updated to CC and, in addition to having one monitor 'fixed' and a sudden 'floating' (I've unable to paste the two up, but would have a run on my second monitor) it was working OK. The last two days, I can't set both monitors. I double click on a clip in the project, and it is not displayed anywhere.

  My preference is to set the workspace to imitate CS5.5, but this option is sorting is no longer the problem.  I'm trying to go back to the previous workspace and it tells me that there is not.  I tried control boxes and uncheck the menu window. Any help would be appreciated.

  

  Source monitor can normally be added to any 'panel' by clicking on the Panel, then in the menu dropdown you show, by clicking on the Source monitor... then navigate to it by selecting the tab is in the Panel that was highlighted when you clicked.

  You can change the panels by "entering" a title as source or scopes or whatnot too and drag in or to another palette, with the possibility of having always appear (for example, if you then release in the area left highlighted a Panel, you drag in) to the left of other things in the control panel... or if you say leave in the Middle then it displays when you select the tab at the top of the Panel. Others cover it when you click on the tabs. I think that the help pages following (they aren't long) could you get:

  Use and customize workspaces in Premiere Pro

  Working with panels in Premiere Pro

  Using the Source program monitor in Premiere Pro

  Things have changed a lot since 5.5...

  Neil

• Timecode jamming in the Source monitor

  I know how to clear a time code in the first frame of an element in the source monitor and in the project Panel: in the project Panel, right click - Edit-> timecode - > insert time code of choice.  But I want to do is go to a point 'IN' in the synchronization of the Source monitor and jam a time code in the 'IN' place.  Whenever I have insert an hour in the monitor Source Panel, that time becomes the time to the first frame of the clip, not the 'IN' time point.  Now, I noticed that in the project Panel (right-click, edit etc...) there's a setting that says 'Current image', but it can not be selected!  So is it possible to blur a moment in a point "IN"?  BTW, I found a way to do this using math and computation of the time between the beginning of the clip and the entry point, but it is labor intensive and prone to errors in subtraction.

  Instead of selecting "Edit video" in the project Panel, with the source panel-based use of the menu of clip to select Edit/time Code, you should have access to the current framework option.

• Transmit mercury only shows the program, not the source monitor monitor

  Hello people,

  For some time now, I have this problem where only the signal from the program monitor is sent to my external monitor. The source monitor working within first on my computer monitors, but will not playback on my external monitor. It is in each project unique im working on and I find it very difficult to identify the problem. It won't work when I drag a clip from a location to the source monitor or make a match frame of the timeline. I would add also that sometimes, but not everytime, when the program monitor transmits very well and I do a double click on a clip in the tray or drag it to the source monitor, my external monitor goes black. This also happens when you do a correspondence framework. And to add another weird thing, the audio is being transmitted by the source monitor. First pro audio is routed through my external monitor. I can just hear end during playback of clips in the source monitor. It's just the video that will not be displayed on my screen.

  
  

  My hardware is just simple Quicktime mov with ProRes in them in 1920 x 1080 so nothing special.

  I have the latest version of first and my driver for the monitor of Blackmagic Mini is also updated.

  I'm open to suggestions!

  Thank you!

  I think I solved my problem.  After a lot of troubleshooting, we ransacked the Premiere Pro preferences (hold down shift + option while launching the first) and the source has been restored.  Or my preferences were corrupt, or else my system has been set up in the reading panels and Audio hardware preferences.

  Unfortunately, after a few days the reading of the source monitor went out again.  I trashed my preferences again and reading has been restored.  I'm still trying to understand why this has happened.

  To answer your questions.  I am using a monitor.  He has worked with AJA Kona, but we recently went to Blackmagic so that we can use to Resolve.  I do not know if yes or no the Blackmagic was initially working right, but I don't think it was.  I got stuck on a large project, it was a few months before I could make a test or troubleshooting.

  I hope this helps!

• Shift + command + SPACEBAR launches the screenshot instead of reading the Source monitor

  I try to use a hotkey (Shift + Ctrl + SPACEBAR) to review a clip in the source monitor, but it does appear a screen ScanSnap.  How to fix this?

  Published by Kevin Monahan

  I changed your title to be more searchable

  CTRL/Cmd-Alt-K made a list of short films of keyboard, also found in the menu edit near the bottom. The short you list is listed in my list as playing to start... at least in the standard list for PC.

  Neil

• Where the source monitor Panel? (MacOS)

  I can't get a monitor source side by side with the program monitor. I spent 2 hours just trying to set up my work space. I don't see either a choice of sets/options for the layout of the workspace. I know that just, it may not be so hard to do. Signed, old user frustrated of the PCF. Ugh!

  Hi beekeeper.

  The Source monitor is in your workspace, but it is currently behind the program (which is weird) monitor. Check out the tab on the left that says "Source: Darkest Hour SS.dpx"-it's the Source monitor. I don't know why the reset of your default workspace is not to give the two-seater monitor display, but if you drag the tab to the program monitor on the right side of the chassis as it is now, you'll see a purple trapeze appear. If you deposit there, it will be moved to a new framework and should show the collection of other committees in a frame on the left. Again, don't know why reset does not work, but you can trash the workspace files by going in your Documents directory in the Finder and hole in your Premiere Pro profile folder and delete the files "Layouts" and "ArchivedLayouts". The next launch, the default workspaces will be restored.

  Colin

  First Pro EQ

• Audio waveform disappears from the Source monitor after opening another audio clip

  I use Premiere Pro CC 2015 on an iMac (late 2014) of new 27-inch Retina 5 k with 8 GB of RAM.

  I've got 5 takes of the same voice that I'm editing into a simple video "How-to" recorded at the screen. I'm pass between the clamps and picking at the take, that I prefer and move it into the timeline.

  Problem is, once I open an audio file and then pass away from him to another audio file in the monitor Source Panel, the waveforms on this clip will not appear when I open it in the Source monitor. See waveforms is a unique case, unless I restart Premiere Pro. I can still hear everything and I still see the playhead moving across a green screen, but the waveforms are gone. It works fine the first time I open the clip.

  I waited about 10-15 minutes to see if it's just to take a second to reload the waveforms, but none of the clips appear in their new waveforms unless I restart the first. I tried to open a video and then come back to an audio clip. I have actually managed to do come back simply by moving the source monitor Panel in its own window separate from the table of mixing, effects, etc. but it happened again the next time I went to another audio clip and no amount of monitor source is fluttering it don't come back.

  Is there something that I am missing? I can still change course by listening to each piece of the voice-over begins, but without seeing it, it's a real pain.

  I think that this has been fixed with the latest update. No more problems!

• Does anyone know a shortcut for create/exit points exactly 1 second (or no preset amount) in the source monitor apart?

  Does anyone know a shortcut for create/exit points exactly 1 second (or no preset amount) in the source monitor apart?

  For example, I want to choose a second clip sections of 5 minutes, but do not want to move the points of entry/exit with the mouse in the hand. Would also be useful to several clips where 1 s/exit points have not been established

  Thanks for all the answers!

  Go to preferences and on the set of forward/reverse reading pane, for the number of images you want to move the read head (in this case 60, two seconds):

  

  And click OK.

  Then put your first marker, then type shift + right arrow to move the playback cursor, the number of images that you entered.

  If you type shift + left arrow , it will move the playback cursor backward the number of images.

  MtD

• Reset the Source monitor timeline

  When the claws come out my camera and are placed on the timeline, the time does not start to 00:00:00:00 but that ever time the camera placed on the clip.  Is there a way (or a workaround) to redefine the time in the Source monitor to 00:00:00:00?

  PS. I know how to put my camera at the start of a shooting at 00:00:00:00, but it is impossible to switch several times to the 00:00:00:00 during a 20 minute session fast movement.

  You can right-click a file in the project Panel and change the timecode to start at all times as you want.

• Audio waveforms in the absence of the Source monitor

  Win 7 CC2015 (not xxxx.1)

  Audio waveform is displayed in the Source monitor... but they play very well.

  Stopped appearing mid project.

  Reloading to monitor source made no difference.

  Thoughts please.

  BTW 2015 not improved to xxxx.1 environment change stage of the project.

  Hello

  It was a known problem in the initial version of 2015.

  You simply drag the slider under the source monitor back and this problem has been reported and stands fixed in version 9.0.1 release.

  Vinay

• Why does my audio play in the source monitor, but not in the timeline?

  I imported some MOV files in first 2015 (codec H.264, PCM Linear, timecode).  The audio plays fine in the source window, but when I drag the clip to the timeline, no audio file appears under it and there is no sound.  I followed the instructions on this link, nothing helps: no sound during playback in Adobe Premiere Pro.

  These clips were filmed on a GH4.  I was shooting 1080 24 fps.  Before this problem I was shooting on a Canon 5 d.  Is it possible that it is the codec?

  Video playback in the timeline panel is also trolling and jittering a bit, but normally play in the source monitor.

  If anyone can help, please excessively it because I am not very fluent in the first.  Thank you.

  Source patch http://forums.adobe.com/thread/1442800?tstart=0 can help

• CC15 crashes when audio bug - fast shuttle the source monitor

  So, with the latest version of first CC15 (2015.0.1), when I have images in the source monitor Panel with any audio other than on the stereo and I quick-shuttle forward or backward, I have an accident with this crash report:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Adobe first Pro.exe

  Application version: 9.0.1.36

  Application timestamp: 55acd8dd

  Fault Module name: AudioRenderer.dll

  Fault Module Version: 9.0.1.36

  Timestamp of Module error: 55acb6fe

  Exception code: c0000005

  Exception offset: 000000000001f8cc

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 4105

  Additional information 1: f7bd

  More information 2: f7bde30bbb93e21ad58fc5293b02f73d

  3 more information: 6f86

  Additional information 4: 6f8697bd2fc5361900645287eebcf52f

  It is clearly audio related, that doesn't happen with the stereo clips and the failure is AudioRenderer.dll. I've submitted a bug report, encourage others to do the same if they can reproduce this problem.

  Someone encountered this or have a fix?

  Hi RM,.

  Someone encountered this or have a fix?

  I apologize on behalf of Adobe for this question. Please update for first Pro CC 2015.0.2 (9.0.2). The solution is in the update.

  Thank you
  Kevin

• Whenever I have cut an audio clip in my sequence, the source monitor freezes creating two of the same framework.

  Whenever I have cut an audio clip in my sequence, the source monitor freezes creating two of the same framework.  I then have to wait anywhere from five to ten minutes only for Panel source monitor back to normal to continue editing, with playback.  Itself doesn't freeze, I am able to go into my settings and change again within the sequence.  It's only the source monitor.  Anyone know this problem and is there a solution?  Thank you!  My apologies if this has already been discussed in another post.

  I am running on a processor intel i5 processor 4690 k, 16 GB of ram, all-new msi motherboard and 980 gtx graphics card nine.

  Under the key sequence, uncheck preview Composite during Trim.