CListCtrl bmp picture blurr

Similar Questions

• read a bmp to computer file

  Hello

  I tried to read a format my computer .bmp picture to the façade. But he showed an error.

  I have attached the error message and the way I did to copy the image.

  Thanks in advance

  Can navigate you down to the data.vi to read the BMP file and check where the error occurs? You use this vi as well as any piece of othe of the code that can be in error at the entrance to this vi?

  Save the bmp file once more of the painting as a bitmap file and check.

• Compaq 6910p driver problem

  I wanted to play a game that asked me to install a new driver with OpenGL support. I found one that has supposedly fit so I started to install. Everything was fine until the reboot part. The image resembles a .bmp picture now. What should do? I need the computer tomorrow so please quick help! The computer is a Compaq 6910p with Windows XP and Ubuntu multiboots.

  Problem solved thanks to the restoration of the system, which saved an AVG update yesterday problem solved and computer back to normal. I guess I should keep saving up for my own computer to spoil...

• DMA2200 will not display jpg images

  I connected my DMA2200 for my Vista Ultimate PC. It can browse the music files and photos and listen to music. It can navigate to the pictures folder and see etc. subfolders and nested subfolders.

  It may display one of the few BMP pictures I have in a subfolder, but WILL NOT even find even less, and show JPG files ANY files - display 0 files in each folder with jpg files (and there are MANY of them).

  I hunted with Google and tried various patches of registry to reset the JPG file associations in Vista, nothing helps.

  It is not a fault in the Extender itself, as I CAN see the jpgs on another Vista machine.

  What registry entries or other patches could do this job?

  I disconnected remove the Extender and reconnected a half-dozen times.

  Any suggestions welcomed, short of reinstalling Vista - I would have more than 140 programs to reinstall as well moving 25000 + files, music and photos the machine turned off and vice versa, and I don't REALLY have to do it!

  Thanks if anyone can help with this. I am apparently not the only one, but haven't found any messages suggesting a fix.

  John McC

  HOORAY - which has SET.

  It seems that any order of the entries in the registry. After making a backup of the registry (using a system restore point) I had to:

  1 remove the.jpg registry key and the subkeys using Regedit

  2. edit the file jpeg.reg to replace each name key inside jpeg jpg

  3 Rename the file jpeg.reg in jpg.reg as well (I think that this step, with the benefit of hindsight, will may not be not necessary, but it is useful to keep track of file who's who).

  4. double click it, the merge again into the Registry.

  5 restart the Extender.

  After all THAT and a certain time for the Extender allows to browse records once again, he began to see AND view jpg files in all folders of photos and sufolders.

  But HOW long a palaver!

• Picture It! Express does not open the types of jpg, png, gif and bmp files.

  My XP Pro system crashed and I restored from a backup.  Now my Picture It! Express does not open the files jpg, png, gif or bmp.  It is said that Picture It! Express cannot open this type of file.   How can I open these types of files again?

  Hi Ralph w. Smith

  ·         Do you have an error message when you try to open the files?

  Follow these methods.

  Method 1: Uninstall and reinstall the app and check if the problem persists.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2: Follow the steps for Windows XP section.

  How to solve the problems that occur with the JET component and the MDAC component

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;870630

• error code while trying to open the photos include JPEG and BMP files: C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  I withdrew just a very good old scanner which apparently couldn't handle the recent installation of Windows XP Service Pack 2 or 3, and went with a rather nice Epson V330 Photo.   I uninstalled all old software, want my images to JPEG and BMP to open in Adobe PhotoShop Elements 8 for editing and development.  It is my job and my hobby and means of photography technique.  I reinstalled the scanner by removing the Arcsoft software with which it has been furnished, which is not really suitable for what I do.

  Now, I can not open JPEG in PhotoShop Elements 8.0 and here I get the error message:

  C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  It seems to have something to do with the hack with the folder options after that I spilled the Arcsoft as any kind of primary program.

  BUT I have to open JPEG files, and it MUST be in PhotoShop Elements 8, I bought.  I can see, overview and could open to the limited capacity of some of the ArcSoft stuff, but I'm not interested in distance using that.

  How can I get these files/folders to open in something useful?  I was able to create JPEG on the new scanner, but now my computer opens not those or 'old' of my files.   See the warning message.

  I'm trying to uninstall all the software now and do not reinstall the stuff of Arcsoft, which would not be useful for me in any setting.   But I do not think that this will be the solution, as my computer can not open these key files in PhotoShop Elements 8.0.

  I think it's something I did during the passage, but I did system restore and NO RESULT.  NONE!

  If you open a directory of photos and go to the thumbnail view in Explorer, they display the thumbnails correctly?
   
  I think that you need to reset the file association for programs that open the image files.  Try a right-click on a jpeg file and go to properties and click on the button to edit, and then designate PS elements 8 as the top program open with, and then see if it works very well.
   
  You can also check the settings in the registry for the types of image files.  Seewww.oehelp.com/noimg.aspx , which deals with a related issue.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I withdrew just a very good old scanner which apparently couldn't handle the recent installation of Windows XP Service Pack 2 or 3, and went with a rather nice Epson V330 Photo.   I uninstalled all old software, want my images to JPEG and BMP to open in Adobe PhotoShop Elements 8 for editing and development.  It is my job and my hobby and means of photography technique.  I reinstalled the scanner by removing the Arcsoft software with which it has been furnished, which is not really suitable for what I do.

  Now, I can not open JPEG in PhotoShop Elements 8.0 and here I get the error message:

  C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  It seems to have something to do with the hack with the folder options after that I spilled the Arcsoft as any kind of primary program.

  BUT I have to open JPEG files, and it MUST be in PhotoShop Elements 8, I bought.  I can see, overview and could open to the limited capacity of some of the ArcSoft stuff, but I'm not interested in distance using that.

  How can I get these files/folders to open in something useful?  I was able to create JPEG on the new scanner, but now my computer opens not those or 'old' of my files.   See the warning message.

  I'm trying to uninstall all the software now and do not reinstall the stuff of Arcsoft, which would not be useful for me in any setting.   But I do not think that this will be the solution, as my computer can not open these key files in PhotoShop Elements 8.0.

  I think it's something I did during the passage, but I did system restore and NO RESULT.  NONE!

• What format are the pictures of Contact? BMP? PNG?

  Hello

  I do a cross-platform application. The photos in the address book can be stored on Android, pretty much any type of image. JPG, PNG, BMP etc...

  My question is. When I'm trying to get a picture of contact in blackberry address book, y at - it a way to get this type of image it is, or are they all converted to the same image?

  Thank you.

  It turns out that they can be any type.

  Here is the code:

  Vector contactList = Phone.getContactsByPhoneNumber(inputNumber);
  Contact contact = (Contact) contactList.elementAt(0);
  byteStream = contact.getBinary(Contact.PHOTO, Contact.ATTR_NONE);
  
  EncodedImage contactPic = EncodedImage.createEncodedImage(byteStream, 0, byteStream.length);
  String picType = String.valueOf( contactPic.getImageType() );
  

  

• I need to change a BMP to a JPEG photo picture how to do that

  I saved a picture as a Bitmap and need to change it to a JPEG file.  How can I change?

  Hello

  This should ask in answers - Forumns Windows for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  ============

  This can do:

  IrfanView - free (download plugins too)
  http://www.IrfanView.com/

  IrfanView - Forums - help here if necessary
  http://en.IrfanView-Forum.de/VB/Forum.php

  I hope this helps.

• Can not see the pictures (.bmp, .jpg) with the new installation of windows 8 pro

  Just installed Windows 8 Pro 64 bit on HP laptop. At the graphics card AMD Radeon 7660. Cannot display pictures or even photos.

  http://www.thewindowsclub.com/take-ownership-Windows-8 can help. use at your own
  risk.
   
   
  ..
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question
   
   
   
   

• Toshiba Gigaframe Q80 - no pictures from memory card

  Hi all

  My Gigaframe Q80 does not have a Memory Stick Pro (Sandisk Ultra II 1 GB) and does not picture. Almost the same problem with a Sandisk micro SD (6 GB) which is in an SD adapter. The framework recognizes the card but does not load the images and the menu entry "copy images to memory" is inactive.
  Is there anything else that I forgot? The images are in the root directory of the memory card. All memory cards that work?

  Thank you for any suspicion

  Best regards
  Frank

  Hello

  This Toshiba page http://www.toshiba-multimedia.com/ you can find some info about this Gigaframe Q80.

  It seems that the Gigaframe Q80 supports only jpeg and bmp image standard.
  In addition, the s framework map memory seems to bear - SD, SDHC, MMC, MS, MS Pro, xD cards.

  Have you tried another card? If this is not the case, check it!

• HP C410a Photosmart Premium: bad printing quality on the picture

  Printer HP Photosmart Premium C410a, just replaced all THE cartridges (genuine HP) - he always tells me cyan and magenta are weak, but the test page printed fine and I cleaned the print heads. When I print a picture (of the program Apple Photos) the ink begins to blurr and run. It is a new problem, all worked well.

  Hello and welcome to the community of HP @BevA1,

  I understand that you encounter some problems print quality when you print pictures of your HP Photosmart Premium C410a. I will do my best to help.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

  Problems with print quality setting for the HP Photosmart Premium Fax all-in-One Printer Series (C410a C410b, C410c, C410d, C410e)

  If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• Absence of iamge by sending to the phone (tested jpg bmp Formats)

  The program can not send Image files to my phone so what should I do?

  The program gives me an error "failed to send to image.

  I have test the sending of different formats like jpg and bmp, but it gives me error.

  What program?
  How you try to send the picture to the phone?

  I did it yesterday, using battery Toshiba BT and BT between my Qosmio x 300 and LG BL40 new chocolate. I can send files back and forth.

• OfficeJet Pro 8610: Helps the scanning resolution and economy. BMP

  When scanning resolution is poor, how can I increase it to 300 DPI max... How to save picture under. BMP it currently only gives three options, PDF, OCR, or JPEG

  Well well after literally hours of Googling being impossible to find anything at all on this unit or any other site, a friend suggested that I open the area to set up scanner on Mac itself... and to my amazement after a little digging here, I was able to find the settings for the CIO and the file type save high-resolution BMP images.
  Why hell HP do not display anything in their pages help or on the LCD of the printer to indicate how do, I'm not sure. I'll be happy to send a screenshot to anyone who needs this info.

• How to program picture two layers?

  Hello

  I want a picture of a sign that has a map in the background information and a GPS position as a figure are updated on the program card. Map file format can be e.g. bmp. NOR example alphablend with x % of transparency is something that I could further develop, but I wonder if there is a faster way of doing that without redrawing the entire image whenever a point position figure is added to a map? The same program has to communicate simultaneously with an instrument for a fairly intensive amount of measurement values.

  Thanks for any advice.

  /Petri

  When it comes to draw lines, is not the control of the Web the best choice?

  You can make the background transparent and draw lines to show the path of the vehicle.

  But I'm not sure you can make the lines thick enough to be visible on a background colored like a map.

• contradiction between the delay and fetch file bmp

  

  Hi all

  I need to extract the BMP file in confirm.vi (pic2), but when I run the program, the BMP file will not come out correctly. the last picture always come out. (for example, the first photo has come out of time, but when image B should be out, he still see A photo.)

  the correct picture will come out correctly when I put the delay of 100 ms in the loop. but it will cost you lost time, two arraies have 300 and 20 elements separately. How can I do it more quickly to get the correct image? Thank you!

  Hi Yes,

  It seems that you used too many loops to make your comparison function. Try to use Search 1 D Array.vi to eliminate inside while loop.