CLOCK AND DATE ARE AUTOMATICALLY SET

Similar Questions

• My PC clock and date always change when I turn on the PC. How can I get the time to stay the same / correct?

  Hello. Not sure if I have come to the right place with my question. I have Windows XP Home Edition.  My PC clock and date change every time I turn on my PC.  I set the time and date when I turn it on, but then when the PC was interrupted and I next turn to the, (after a period of time) the time and date will be incorrect - a few months and hours.  I have looked for ways to solve this problem, but couldn't find anything.  Any suggestion would be appreciated. Thank you.

  Hi Anti-A,
   
  -Remember to make changes to your computer before this problem started to happen?
  -You are using a laptop or a desktop computer?
   
  Determine if the loss of time is the result of a weak computer battery. Follow these steps to do the same thing:

  a. click Start, point to programsand then click MS-DOS prompt.

  b. at the command prompt, type time and then press ENTER.

  c. compare this time with the time shown by the clock in the taskbar.

  d. Type exit and press ENTER.

  If the computer's time and the time on the clock are different, the computer's battery may be too low for accurate time, and it must be replaced. For more information on how to replace the battery, refer to the documentation that came with your computer.
   
  Follow the steps listed in the article below and check if it helps you fix the problem:
  Windows XP, waste of time

• Clock and date on the lock screen disappears after update to 9.2

  Hi all

  After the update of my 5s Iphone to iOS 9.2, I am not able to display the CLOCK and DATE in my lock screen. Is their any setting I should change?

  Thanks in advance

  Howdy Karthik SJ,

  It seems that the date and time that you would normally see on your lock screen not displayed once you upgrade to iOS 9.2. I would start by quitting the application settings:

  Force an app to close the iOS
  https://support.Apple.com/en-us/HT201330

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset
  http://support.Apple.com/en-us/HT201559

  Thank you for using communities of Apple Support, let us know how it goes!

• . Error... my clock and date does not work...

  Hello

  my clock and date does not, that why I can't update my pc or I can not install updates... Please help me

  Thank you.

  Do you mean that you can not set the date & time on the tray system 'clock '? Or you can, but it changes when you reboot the machine?

  It is a laptop or desktop?

• I restored the password of Firefox Sync and data are not synchronized.

  I reinstalled Windows and downloaded Firefox, but forgot the password synchronization. Restore successfully, I logged into my account. But the synchronization only has not occurred. Other devices synced are not available. Can I recover the data somehow?

  When you request a new password to sync, your data are deleted from the synchronization server.

• My Windows Live Messenger display messenge name and staff are automatic update!

  My Windows Live Messenger display name and staff messenge are automatic updated to a foreign link and url. When I login, I always see someone connect from somewhere else. And even I'm out somewhere else, change my password, he'll be back in 5 minutes. And my nickname and messange screw. It seems more that just the login/password has been stolen. It seems to happen after I click on a link of the email from my friend. That's happened?

  Hi Jerry,

  In dealing with the problem with Windows Live Messenger, I recommend you post your question in Windows Live Solution Center for assistance:

  Portal Messenger

  Hope the helps of information.

• problem with the clock and date

  I need to change the time and date when I started windows. so, what's the problem?

  It could be the button for the CMOS battery.

  A low CMOS battery can sometimes various issues, including slow, locking unexplained performance issues as well as others.

  It is quite rare, but the battery is relatively easy to replace, check the manual of your computer/motherboard for replacement details.

  Generally, the battery is a watch battery "CR2032", about the size of a nickel.

  `~`

  The current time and the date now in Baja California, Mexico

  07:36
  Friday, may 3, 2013
  DST - 0700 UTC
   
  UTC/GMT is 14:36 Friday, may 3, 2013
              
  Current weather conditions in San Felipe

  Sunny29 ° C / 85 ° F

• clock and date

  Hello. Whenever I stop my lap top for the date and time to stop also. So whenever I turn on my computer, I have to go into the control panel to reset the date and time. Not sure why this is happening? It's every time.

  Hi Anne,.

  You are welcome

  Try the following.

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the option in the Bios ( f10 ).

  You should see that the first field highlighted is the time value - set this to the correct time by using f5 and f6 (f5 will reduce the number & f6 it will increase).  When it is correct, press ENTER to highlight the Minute field and again, use f5 & f6 to set the correct minutes.

  When finished, press the arrow down to select the first Date field.  This should be for the month, so using f5 & f6 to enter the correct value.

  Press Enter to highlight the field day and this, and then press ENTER to highlight the year field and then set this.

  If you are happy with the settings of Date and time, press f10 and press ENTER to save the settings and exit the bios.

  Let windows load completely.  If the Date and time correct does not appear, go to the control panel and set the Date and time correct here.

  Try to restart the computer and verify if this has fixed the problem.

  Kind regards

  DP - K

• Data are automatically downloaded to the computer.

  Original title: automatic download

  Hello

  I am facing a problem about automatic download of data. Even if my computer does not all tasks over the internet, by clicking on 'View network status' I see that bytes are received. What happens for each internet connection. However, speed is not affected. I can surf and download stuff pretty quickly. I disabled automatic updates and notifications of the app. I have Norton Antivirus and a complete analysis of the system has not revealed any virus.
  I am unable to change the Sync settings on connections inhalers option and I think that the problem is perhaps due to this. It is 'ON '. I can't change it because whenever I try to log in my Microsoft Account users, after entering my email address, I get "Please Wait". I want to know why I'm getting this and how I can solve this problem.
  If you think that the automatic download is due to something else (like a virus, perhaps), please tell me what to do. Because of this problem my internet Bill is going through the roof. If someone can provide a solution I will be immensely grateful.

  Thanks for the help of microwave blue. The problem was caused by a spyware. He was automatically transfer large amounts of data. I solved the problem by following these steps:

  1. I uninstalled Norton Internet Security, because I had the feeling that for some reason he was not be able to detect the virus that was responsible for large data transfers.
  2. I have activated Windows Defender and updated.
  3. I uninstalled all free software (like Karl, etc), as well as known spyware with programs (free WildTangent games).
  4. I had not updated Windows for some time, so I downloaded and installed all updates pending (important as optional).
  A comprehensive analysis by Windows Defender detected Adware:Win32 / WebCake. I discovered that this causes pop-ups to appear in browsers.
  The big unknown transfers have stopped now. I am really impressed by Windows Defender. Regarding Norton, it's a really lame antivirus. Better to move to Windows Defender/Microsoft Security Essentials.
  Please tell me about perfmon.exe. I can now see what process is changing the amount of data.

• Duplicate photos are automatically set to the library of iCloud?

  I changed system library. After that I named the new library as the library system and reactivated iCloud, Photos began to download all my photos to the photo library (yet) to iCloud.

  Do not exceed the storage limit for my iCloud plan, essentially the new library system is a duplicate of the previous, but he is now on a different drive.

  By train to group photos in my photo library, newly designated system with those of the iCloud existing photo library, will be automatically solved duplicates? Or I have to manually delete the duplicates in some way?

  Photos is to merge the new library system in your library to iCloud.

  Once the pictures are downloaded, they are compared to iCloud.

  Open the Console.app (in Applications > utilities). The Console will show you, done what iCloud.

  You can type 'photomodel' in the search field of Console. Then I see the process that makes the double check:

  com Apple.Photomodel: duplicate detection...

  

• Strange question: Hyperion Planning Forms becomes read-only and data are destroyed: 11.1.2.2

  Hello

  Let me start by saying that I am not new to Hyperion Planning. We encounter a weird problem in our Test System. We notice that some (NOT ALL) of our tour of webforms in readonly webforms. all the cells in the gray form. It comes to despite the fact that the read-only checkbox is not checked in the form as well as the security is fine on all dimensions; Basically, all the cells of the form are valid combinations.

  The form becomes readonly, and all the data on this form is always Wiped. This has happened only for two web forms so far. We took a lot of Calc (none of the Calc have cleardata command). We do not know why this is happening. Maybe it's a bug in the product... not sure. has anyone seen this behavior before?

  Please let me know.

  -

  PK

  Please skip this question. It happened because someone on my team had added a member under umbrella of level 0.

• With Firefox 24, authentication ID and password are automatically filled in. With Firefox 26.0, this happens is more although the memory of password is enabled. What should do?

  The ID or the password appears on a site, but the two do not seem to with Firefox 24. I have an iMac with OS X version 10.9 (Mavericks, who is also newly installed).

  Note that you are currently using a beta version of Firefox 26.0 and not the current version of Firefox 25.0.

  You can find the full version of the latest version of Firefox 25.0 in all languages and for all systems operating here:

  • http://www.Mozilla.org/en-us/Firefox/all.html

  You always see the names and passwords in the password manager?

  • Tools > Options > Security: passwords: "saved passwords" > "show passwords".

  Make sure that you run not Firefox in private browsing mode (permanent) (don't forget the story never).

  • https://support.Mozilla.org/KB/private+browsing
  • Firefox > Preferences > privacy > Firefox will be: "use the custom settings for history".
  • Uncheck the box: [] "always use the navigation mode private.

• Smartphones blackBerry call logs and emails are automatically delete

  On my BB8130, I lose automatically logs calls and emails.  What can I do to prevent the erasure of this info?

  Why my BlackBerry loses its call logs or message logs? will solve all your problems.

• How to display the clock (time and date) in the task bar at the bottom of the right hand of the computer

  I ask for help.

  I want to be able to display the clock (time and date) in the taskbar at the bottom right of the computer

  Hi FrankNikolich,

  Thanks for asking! I understand that you want to display the clock and date in the system tray.

  1. have there been recent changes to the system before the show?

  Follow these steps and check if that helps.

  (a) right click on the taskbar, click Properties, click Notifications.

  (b) click on the Customize tab, click on the System Turn On or OFF icons.

  (c) in the drop-down list, select Yes for the clock.

  (d) click OK.

  Answer us with the results. I'd be happy to help you further.

• Z440 - M60 BIOS - time and Date settings

  We can configure the Date and time in the BIOS on a Z440 with worm M60?
  If Yes, where is the option?  Sorry if this is a stupid question.

  I guess I don't think it is preconfigured, but I don't know even how to check the current configuration.

  EskoBomb, BIOS Z840/Z640/Z440 has many changes from previous HP workstations.  The user interface of BIOS F10 is different.  I deleted my previous answer, since it applied to the previous HP workstations.  (Sorry, I misread your original message).

  BIOS Z840/Z640/Z440 has NO settings to change the time and Date.  This generation of workstations doesn't have this option.  The time and date can be set after bootinging, and then edit them in the operating system.

  These BIOS settings are no longer needed.