Clock delay Xperia S Tablet

Similar Questions

• When the Xperia Sony Tablet S become an update of Jelly Bean?

  When the Xperia Sony Tablet S become an update of Jelly Bean?

  Hello

  I understand that you are looking for the android 4.1 update system for the tablet. Unfortunately, because of all the variables involved with, testing, manufacturing and distribution, we are not able to provide dates of final release the new update of the system.

  Note: If my post answered your question, please mark it as an "accepted Solution".

• I'm having issues hdmi with my Xperia S Tablet and the home with no signal stand

  I tried to figure out how to get my Xperia Tablet S to play on one of my TVs hdmi function. When plugged into the home stand (SGPDS3), the Tablet acknowledges that the hdmi cable is connected but when switching in the entries appropriate on tv, no message signal on the tv. Of course, when I unplug the cable from the tv, the Tablet recognizes this. Is there a setting I'm missing on the tablet in order to play?

  Hello jmercer18,

  Try going to --> display settings and select 'Auto HDMI output'.

  See if that helps.

• Firefox blocks permanently on Sony Xperia Z tablet with Android 4.4

  It's

  We are sorry to hear that Firefox crashes. To better help you, please follow the steps below to provide us with crash IDs to help us learn more about your accident.

  1. Enter Subject: hangs in the Firefox address bar and press ENTER. A list of submitted Crash reports will appear, similar to the one shown below.
  2. Copy the 5 most recent report ID begins with bp - and then back to your forum question but that stick in the box of "Post a response. (Please do not take a screenshot of your plant, just copy and paste the ID image below is just an example of what your Firefox screen should look like)

  

  Thank you very much for your help!

  More information and additional troubleshooting steps are in the article Firefox plant - troubleshoot and prevent assistance fixing crashes .

• is there an entry on the sony xperia s tablet usb mic?

  just ordered one, would be very useful, or can I plugged a usb on the multiport microphone?

  No micro usb for multiport you need adapter.

• Sony please give us root xperia s tablet

  Sincerely everyone...

  Because Android is an operating system 'Open Source', Sony, Samsung, Asus and like it receive no additional cost to install an operating system that is "FREE"... then why lock customers, who have paid a lot of money for your hardware, to make use of the "FREE" android os, they like?
  If they brick it, to blame only themselves.
  Yet once again, I say, Android is a 'FREE OPEN SOURCE OS'!

• How is the most recent update on my Xperia Sony Tablet S refuses to let me download Flash Player

  Since the last update, I can't download Flash Player

  Flash Player for Android is no longer available. For more information, see here:

  http://blogs.Adobe.com/flashplayer/2012/06/Flash-Player-and-Android-up date.html

  Android users can always download and install Flash Player from Flash Player Versions archived page on the Adobe Web site.

  Please visit: http://forums.adobe.com/thread/1061194

  Please visit this page for a list of all certified devices:Flash Player certified devices

  You can check out the link posted by Ameline above for archived versions of Flash player

• How can I activate mode "Developer" on xperia Tablet z?

  Hi all

  I own a Tablet new xperia z.

  One thing that I was like is that default Chrome to the display of the Desktop version of a web page by default (rather than the mobile version of a site).

  I found information online explaining how to proceed:

  http://www.guidingtech.com/16169/desktop-mode-websites-chrome-Android-permanently/

  I wanted to perform the steps described in the "for users without Root access", because I do not want at the root of my brand new camera.

  It comes to getting the work of adb command. I could get this tool via a "mini-sdk" provided on this site:

  http://androidforums.com/FAQs/443072-ADB-guide-updated-2013-05-21-a.html

  When I run the command adb suggested, he noted:

  * demon does not. from now on port 5037 *.
  * the daemon started successfully *.
  error: device not found

  I then read this page about the adb via the "usb debugging": setting Protocol

  http://eSupport.Sony.com/info/878/us/en/

  However, when I try to visit the "USB debugging" on my camera of xperia z equivalent setting, all settings in the 'Developer Options' section are disabled.

  I then read this web page describing how to enable "developer mode":

  http://www.droidviews.com/how-to-enable-developer-optionsusb-debugging-mode-on-devices-with-Android-...

  He suggested going to 'away'and clicking on the 'Number of Build' seven times to activate this setting...

  But when I try this, it doesn't work on my device.

  I've been Googling for awhile to see if the sony devices have an unique alternative to do, so far without success.

  Then you would be able to tell me how I can configure the developer mode on my sony xperia z Tablet?

  Thanks for any help.

  Gurce

  H RyanC,

  Thanks for the link. Unfortunately, the forums are currently read-only, so had the chance to ask the Q it. I tried the the form "contact us" a few days ago, no answer yet.

  But fortunately, I was able to fall on the answer by myself. Will write the answer here, for the benefit of third parties who need to understand this point and to throw off by all the dishes google obfuscation upward:

  • Come on in "settings > developer Options"
  • Notice in the upper right of the screen there is a switch small horizontal slider
    (it is in the 'Settings' title aligned to the right bar)
  • The slider is currently set to the left, then drag it to the correct position
  • A popup appears saying:

    "Authorize the parameters of development?
    These settings are only for development purposes. They can cause your device and applications on it to break or misbehave.

  • Click on 'OK'.
  • You can then enable options such as "USB debugging" in this menu

  I'm a happy chappy now

• How can I get dark clock widget?

  After updating to the latest version of android the dark clock widget is missing, is it possible to recover.

  @Ace_shadow

  I'm sorry to say this, but his party

  http://talk.sonymobile.com/T5/Xperia-Z3-Tablet-compact/recent-update-has-removed-dark-clocks/m-p/104...

• Xperia s slow internet

  I just got a new Xperia S Tablet but it is very slow using the internet and a few times the connection drops

  Moreover, it is not the internet. I have another connected device works fine

  Any idea?

  Hello Jose,.

  Thanks for the post.

  Do you have already updated the Firmware to the latest version?

  How to find out if there is an update available for the Tablet System.

  See the steps to perform the update system on the tablet.

  How to perform an update of the system on the tablet.

  If the problem persists, try the following steps:

  Impossible to establish network connection Wi - Fi connection is intermittent or disconnects.

  Then, contact Sony phone team:

  Contact the Sony technical support

  Please indicate the solution as accepted, if you find this information useful.

  Kind regards

  Tony.

• Data delay FlexRio (generate i/o of delay)

  Hello

  I use SMU-7961R + module NI 6583. I want to implement a synchronous digital communication IPs and I need control the master data of the clock delay.

  To contact a master external IP address, I use the struc timed loop with a clock source the strobe line where I connect the singal clock. The result is satisfactory: each master clock climbing aboard, data are generated with a specific constant delay.

  I have to control the delay (in the loop of the single clock cycle). This delay does not exceed 1 master clock cycle.

  In this case, the best is to include the buffers in the i/o path to the longest path... How can I implement this in LV FPGA...

  Note: Master clock isn't contineous.

  Thank you.

  Kay.

  Hi Marjorie,.

  Unfortunately, the maximum number of cuts will limit the total range of 5ns max, however 5ns is a period of clock at that point, you should be able to delay your data in the SCTL in LV FPGA.

  With respect to the generation on the falling edge, you have two options.

  The first can be done in LV FPGA but it's a little hard to explain. To build on the falling edge, we would first put the module in double data rate mode. Then, it will generate over and fronts. In order not to change the samples on the front, on the rising output must match the value of dashboard falling from the previous iteration of clock.

  For example, suppose you wanted the following values in the output order: T, F, F, t. you have to give a value for the rising and falling each iteration of the SCTL edge.

  Iteration 1:

  Rising - F

  Fall - T

  Iteration 2:

  Rising t

  F down

  Iteration 3:

  Rising - F

  Fall - F

  Iteration 4:

  Rising - F

  Fall t

  The one caveat to this approach is that you could generate only at 150 MHz DDR max of 300 MB/s.

  Another approach would be to reverse the polarity of the strobe in the CLIP 6583. This would require a VHDL work but definitely would make the LV FPGA implementation somewhat easier. Reverse the strobe clock in VHDL would also allow the refresh rate of 200 MHz.

  I hope this helps!

• Tablet Z to HX950 XBR tv mirror screen

  Hello

  I recently bought the xperia Z Tablet and would like to mirror my HX950 XBR screen.

  I tried the direct wi - fi and the activation of mirror screen on my tablet, but it's apparently not how to do it.

  I've heard of Miracast, but nothing in the manual of my TV about?

  all ideas

  Very appreciated

  Johnny

  Yes, you need a DLNA app on your tablet. The application will play or push the content stored on the device to the TV.

• Create a waveform using PCI-6723 AO with various time intervals on the trailing edge of the sample of 200 Hz clock and 0.1% duty cycle

  I use the PCI-6723 card and I am trying to produce a model of waveform using the analog output channel. The wave consists of 5 different voltage levels. The main problem is that the first 4 voltage levels are supposed to have 926 microseconds time intervals and the time interval the last voltage level is supposed to be 1,296 milliseconds. In addition, the waveform must be triggered on the trailing edge of a sample clock of 200 Hz with a 0.1% Duty Cycle. Is it still possible? If so, any help would be greatly appreciated. Thanks in advance!

  Here is what I currently have, but it does not fulfill my purpose.

   int32   written;
      float64 data[5] = {-0.23, 0.38, 1.12, 1.78, 0.10};  //volts
      //long  time[5] = {  926,  926,  926,  926, 1296};  //microseconds
  
      // DAQmx Configure Clock
      DAQmxErrChk (DAQmxCreateTask("",&taskHandleFRQ));
      DAQmxErrChk (DAQmxCreateCOPulseChanFreq(taskHandleFRQ,"Dev3/ctr0","",DAQmx_Val_Hz,DAQmx_Val_Low,0,200,0.001));
      DAQmxErrChk (DAQmxCfgImplicitTiming(taskHandleFRQ,DAQmx_Val_ContSamps,1));
  
      // DAQmx Start Code
      DAQmxErrChk (DAQmxStartTask(taskHandleFRQ));
  
      // DAQmx Configure Code
      DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
      DAQmxErrChk (DAQmxCreateAOVoltageChan(taskHandle,"Dev3/ao0","",-10.0,10.0,DAQmx_Val_Volts,NULL));
      DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"/Dev3/Ctr0Out",1000.0,DAQmx_Val_Falling,DAQmx_Val_ContSamps,5));
  
      // DAQmx Write Code
      DAQmxErrChk (DAQmxWriteAnalogF64(taskHandle,5,0,10.0,DAQmx_Val_GroupByChannel,data,&written,NULL));
  
      // DAQmx Start Code
      DAQmxErrChk (DAQmxStartTask(taskHandle));
  

  Bingo. This code seems to work much better. Looks like I had to reduce my number of samples per 1 to fit the waveform desired in 5 milliseconds of the sample clock delay.

  However, if someone knows a better way to achieve these results, I am open to all ideas.

  void CDevDlg::OnRdr1e1()
  {
      float64     data[4000];
      float64     volt[5] = {-0.23, 0.38, 1.12, 1.78, 0.10};  //volts
      int x=0,d;
  
      for(int v=0; v<4; v++)
      {
          for(d=0; d<741; d++)
          {
              data[x++] = volt[v];
          }
      }
      for(d=0; d<1036; d++)
      {
          data[x++] = volt[4];
      }
  
      // DAQmx Configure Clock
      DAQmxErrChk (DAQmxCreateTask("",&taskHandleFRQ));
      DAQmxErrChk (DAQmxCreateCOPulseChanFreq(taskHandleFRQ,"Dev3/ctr0","",DAQmx_Val_Hz,DAQmx_Val_Low,0,200,0.001));
      DAQmxErrChk (DAQmxCfgImplicitTiming(taskHandleFRQ,DAQmx_Val_ContSamps,800000));
  
      // DAQmx Start Code
      DAQmxErrChk (DAQmxStartTask(taskHandleFRQ));
  
      // DAQmx Configure Code
      DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
      DAQmxErrChk (DAQmxCreateAOVoltageChan(taskHandle,"Dev3/ao0","",-0.5,2.0,DAQmx_Val_Volts,NULL));
      DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"",800000,DAQmx_Val_Rising,DAQmx_Val_ContSamps,4000));
      DAQmxErrChk (DAQmxCfgDigEdgeStartTrig(taskHandle,"/Dev3/Ctr0Out",DAQmx_Val_Falling));
  
      // DAQmx Write Code
      DAQmxErrChk (DAQmxWriteAnalogF64(taskHandle,4000,1,10.0,DAQmx_Val_GroupByChannel,data,NULL,NULL));
  }
  

• Is it a good place to ask questions about the slow s Tablet touchscreen response?

  Is it a good place to ask questions about the slow s Tablet touchscreen response?

  You experience slow response on normal s tablet, the first gen one or the Xperia s tablet, a new.

  If you experience a slow response, it may be because you use too many apps at the time and slowing down of your tablet. How long it lasts?

• My boss dott is blocked and I did not indicate a Gmail, how to unlock? Xperia S compresses

  Hi all

  Yesterday I did a data factory reset on my Xperia S tablet, I didn't have the wifi so I couldn't put my gmail account. Then (I'm a fool) I put a pattern polka dot in the night and when I woke up I could not remember it.
  So basically I'm stuck with this because the possibility of "You forgot your boss?" do not appear because as I said, I did not have my gmail account.

  How can I solve this?

  Thank you.

  Under normal circumstances, the 'forgotten' model should appear after 5 incorrect entires.

  If it does not appear when no google account was never penetrated, I'm afraid that you have to perform a factory reset.