Tablet Z to HX950 XBR tv mirror screen

Similar Questions

• Mirror screen?

  Is it possible to mirror screen Pro of your iPad on a TV screen and also show, in real-time, of annotations, you make using the pencil to Apple?

  For example, if you have a document and you want to highlight certain sections or graphic you want to annotate.

  Thank you.

  Hello

  The best was to do this mirroring is to use an apple TV.

  See you soon

  Brian

• Hi I have a mirror screen ACER Aspire R3 - 131T 11.6 2 in 1 sound on my TV problems

  Hi people

  I have problems with the sound when I use display showing the pic in my sony bravia tv via bluetooth is ok, but the sound is static type crackling noise cound would this little lappy is not up to the job its ok when I use the set method in Explorer, but I have no control over the size of the screen but works very well with the sound I use the sound control on the sound bar I up memory 8gig and the operating system is always on the 8.1 that I think w10 he would kill (unless you know different lol thank you for any input

  Hello

  have a 3050 so I surpose it's the problem

  If I use the game command it works fine but no control over the video or sound settings

  But if I try to use the mirror screen it crackles badly so I guess that I'm stuck to enter the folder and use the flat order no hard real ship so far unfortunately sony withdrew their software to use just for this hunted everywhere for her much luck so far

  Thanks for your help

• problem getting my laptop screen to my TV in mirror screen

  Hello

  I was able to watch my movies on my external hard drive to my LCD tv, but I clicked on the wrong page, where it says don't not portable mirror. as I tried to find the problem on the control/customization panel. I've done worse and now when I plug the cable vga, tv says (no support) and two screens will drain. IM lost on what to do now for even the chance to see the screen of my computer to my tv. any ideas would be great?

  Hi cutehunter22,

  You can try the following steps after you have reconnected the cable VGA/SVGA PC to TVand check if you can solve the problem.

  1. Select the PC on the TV input.

  2. turn the external on laptop screen. It would be a good to consult your manual file or using portable instructions since this procedure varies from a model. On most laptops, there is a F key that allows the external monitor. Generally, you will see an icon on one of the F keys that look like a monitor. Don't forget that you will also need to press the function (FN) key at the same time.

  3 display Windows Configure properties.

  1. right-click on the desktop and left click on Customize

  2. left click on display settings

  3. left-click on the Advanced button.

  4. you should see a tab on the row of the top for your portable video card.

  5. left click on it.

  6. you should see a big button that says Launch Control Panel.

  7 click left on big button.

  8. you should see a window with screens as one of the options.

  9 left-click on display , and then choose display change Configuration.

  10 choose Clone or mirror.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• X 61 Tablet wireless towers off accidents / on the screen Rotation

  New and strange problem with my X 61 (vista race, perfectly up-to-date, 4 GB ram, etc.)

  When I turn in slate mode, the wireless disconnects and refuses to properly reconnect until I reboot. I checked this behavior several times. More confusing: the icon for wireless connection on the right side of the taskbar remains in connected mode, but if you click on it, it will not give you used windows control panel allowing you to access the Networking screens. Still unknown, if you close physically radios with the switch located on the front, the radio LED remains on and using Fn + F5 to bring up the screen of the radio, does not allow me on the radio or turn off or cycle.

  Possible cause: I uninstalled "Access Connections" because it is nothing but trouble for me:

  It may be a variant of the old 'display cannot operate wireless WAN secondary when landscape mode' is active message that I used to get. Basically, this computer does not WAN wireless, never, but for some time, when I tried to use the secondary display landscape in slate mode, it gives me this message and to reactivate the screen in a different direction. It was clearly unacceptable, and I uninstalled the logins that seems to fix the problem.

  With a recent automatic update of lenovo, he reinstalled logins and started this problem again, this is why I uninstalled it again. But now, it.

  Anyone see this? I think remember that screen orientation has been accused of being tied to ActiveProtection (which should automatically detect the orientation of the computer and rotate the screen accordingly, thing which never worked on my machine, this is why I also uninstalled that.)

  It seems impossible that Lenovo could fudge wifi wireless connectivity by writing software that binds the radios to useless (non-functional) modules as protection against shock, but the only thing that has changed over the last few days is my uninstall these programs, so I can't think of any other reason, suddenly, this radio would operate this way.

  Funny you should post this because I literally just signed up to this forum so I could add a post for this problem (such as a temporary solution) in the hope that Lenovo would quickly remedy the situation.  I'm kind of a newbie tech and only recently started problems my computer on my own please excuse any lack of jargon appropriate during this post.

  Anyway, the problem I thought that (like you) has been the connections access version 5.02 update version which was recently published by Lenovo automatically updates for my tablet.  So I uninstalled 5.02 and reinstalled the old version 4.52.  After restarting my computer, I tried turning my tablet mode screen has frozen--> the wireless disabled, connections to wireless LED remain lit and would evict me of secondary landscape mode with the wireless enabled, even if I tried to disable the wireless with the button on the front of the keyboard.  Same problem exactly where you have posted.

  Then I went to my ThinkVantage System Update and looked at my history of update to see what other recent updates may have been originally.  I came across a version called "Intel Wireless WiFi for Vista 32 bit" 12.00.4000.  After doing some research on the Lenovo Web site, I found the driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-70505

  In any case, I thought that it would be worth to back off this update to try to see if it is solved the problem since the update and was installed on my computer was the same exact day I started to notice problems with my wireless in slate mode.  Anyway, long story short I used the tutorial at the bottom of the page of the pilot (pasted below) to access my Vista Device Manager to find the wireless driver and then back to an earlier version:

  Determine which version is installed

  1. Click Start, then click Control Panel.
  2. Click system and Maintenance.
  3. Click on System. In the left pane, click Device Manager.
  4. Click network adapters.
  5. Double click on in the software of Intel (r) PRO Wireless WIFI.
  6. Click the driver tab. The driver version will be displayed.
  7. (Now restore it previous version!)

  Ok.  So once this process is finished, I rebooted and everything worked perfectly again.  However, I have never reinstalled the new version 5.02 access connections and am always running the pilot 4.52.  I didn't mess with it more and push my luck by reinstalling the 5.02 connections more recent access again because it seems to work with 4.52.

  I'm sure that, after losing three days on it to try to fix the problem that it is the responsibility of the new version of the driver "Intel Wireless WiFi for Vista 32-bit" 12.00.4000.  Please if someone Lenovo bed this thread we should try and patch this driver ASAP?  I'm a student and this problem set my Tablet out of operation for several days, which was very frustrating as I rely on my tablet every day to take notes and internet access in the classroom and clinic.  Fortunately, I found a solution but not really a permanent one.  In any case, let me know if this help - it worked for me and I hope it will help someone else out there with the same questions without phone/tablet.  Good luck - and thanks to Lenovo for additional help with this.

• Tablet draws a leak out of the screen directly to the left, whenever I have down Flash CC

  My TS-6608 Turcom / Oh P608N Tablet (people say that they are the same model and I tried both the original driver P608N installation and driver installation Turcom TS-6608 slightly modified for Windows 10 Turcomdrivers)

  draws a line from leaking out of the screen directly to the left whenever I have support with my pen pressure instead of my way of drawing. In Adobe Photoshop CC, it works perfectly fine. Why is this happening and how can I solve this problem?

  A line for every time I press. It is the only blue because that's the color of pen, I had chosen. This happens with the pencil tool and the Brush tool. I happen to run two monitors. Flash is open on the right monitor but I tried to swap around, drop down to a monitor, and it doesn't seem to change. I don't know if this is specific to my tablet or a problem with the program.

  

  It seems that there is a split second after the contact where it does not read my travels before putting in the left straight down.

  

  

  In Flash CS6, there seems to be a similar problem. When I press down, the first point shows but it stops to record the pressure down almost instantly even if I continue upward with the pen pressure. He holds the State pressed down but is not to follow the movement. With my mouse, I can then move around to draw the path, but it is not picking up the pen.

  

  Post edited by: Christopher Navarre

  Post edited by: Christopher Navarre 11:14 August 26, 2015

  In Flash CS3, it goes the same way as Flash CS5.5 where appears a point, it will not save the press which took place or release of the pen tip. If I move the mouse after pressing the pen, I can drag it around the same way. The problem seems to be that flash is not just reading presses pen continues but I don't know how to fix it. In other programs, it seems to work very well (Paint, Photoshop, etc.)

  Another thing I discovered is that if I have another program that is not selected in the active window flash but try to draw in flash using the Brush tool and then he reacts appropriately, but the second I drop the brush stroke and let Flash CC 2015 be the active window again it does not recognize my movements.

  I think it might be a simple driver issue.

  ANSWER:

  There seems to be a bug in the driver Turcom code. If you disconnect a monitor then you can normally draw in flash. What happens with two monitors, it's that the pen cursor position instantly repositioned correctly when you press down. Because I was drawing on my right monitor, it tended to be left (maybe because thought Flash that I worked on monitor 1 or something).

  I have an e-ticket with Turcom as a permanent solution, but for now, simply using a monitor works fine.

• Mirror screen Macbook Pro, iMac 21.5

  I want to use my iMac 21.5 inches (end of 2015) as a screen of my Macbook Pro retina (2015), but were not able to do so via a cable thunderbolt. Can someone help me please?

  Use your iMac as a display with the target - Apple Support Display Mode

• Stream 7 (5709): flow 7/Miracasting (mirror screen) on Windows 10

  I can't miracasting to work on my 7 stream even if all my drivers are updated and other devices (laptop 10 Windows and Windows Phone 8.1) on my network are able to use it. It is not 'see' my wireless display (roku), although it looks if I search for other devices.

  Does anyone else have this problem? If it works for you, what version of the Intel Graphics driver WLAN driver and do you use?

  Thank you!

  Canaws, don't know if it's the same problem but my stream Tablet 8 wouldn't connect to the adapter microsoft wireless (the same as miracast as far as I know) until I rolled back the driver the recommended current wireless lan win 10 version to the previous version (I now use Realtek RTL8723BS wireless adapter date version number 2015-05-15 3008.8.401.2015) and no problems since

• Sony Xperia Tablet S has the space between the screen and back

  Hey,.

  I just discovered that the space between my front and back is! I checked out the site to see if it was one of the tablets known with the question, but it wasn't. Although he did not share the same problem as the Xperia which have been requested to return.

  Here are some pictures:

  http://i350.Photobucket.com/albums/q429/Silasje1/DSC_0082.jpg

  http://i350.Photobucket.com/albums/q429/Silasje1/DSC_0063.jpg

  http://i350.Photobucket.com/albums/q429/Silasje1/DSC_0085.jpg

  Really weird that it can be done!

  I checked here:

  http://www.Sony.nl/support/NL/product/SGPT121GB_S/news/Xperia_S_series_notice2

  But he said that my tablet was not part of the known :/

  I can put my nail enters the length of more than 13 cm

  
  

• X 201 Tablet woes mouse and stylus and touch screen just started three weeks ago

  
  

  Solved.

  The driver of tablet of DSI is a Wacom product published by Lenovo.

  When I uninstalled the version 7.0.2 - 10 and redownloaded and installed the version 7.0.2 - 19, it sets the pen is lost in portrait orientation, he fixed the No calibration of the stylus, and set the mouse lost on reboot.

  

  Barry

• HP Streem 7 Tablet 5701: Blocking of the HP Tablet screen

  HP updated the Tablet when I turned it on. After the update has been completed and the Tablet has restarted (for upgrade), the splash screen appeared (with the icons of the apps) and locked. I hit apps and crept to the screen and press the windows key, etc., and nothing happened. The screen remains locked. All I can do is to turn it on or off, no other work.

  Hello @DLC1,

  I guess you mean set Windows to update and now the touchscreen does not work.

  1. you have access to a card GTA you can connect a mouse with in order to operate the slider, so we can trouble shoot the problem? Better yet, use a usb hub to connect a keyboard and a wired mouse?

  or

  2. otherwise, the only alternative would be to a zero factory that will erase what you have now and redefine the tablet on the way it was at the factory.

  To do a factory reset:

  With the Tablet off the coast and the battery fully charged, press the power button / stop and Volume for about 5 seconds until the opening of the Startup Options window.

  Choose F11 to start the process, and follow the prompts.

  The touchscreen should work for this process that Windows does not work during this period.

  I would like to know which option you are using and I can help with.

  Thank you.

• Portege Z20t-C-121 screen does not automatically turn into tablet mode

  Hello

  We bought a Portege Z20t-C-121 to test as a replacement for some of our leaders. I have built with Windows 10 company and installed all the drivers latest on the Toshiba site. A WiFi Intel driver did not work properly so I downloaded and installed from the Intel Web site.

  The only thing that I can't work seems to be the automatic rotation of the screen; When I dock the screen to use as a Windows Tablet detects this and goes into tablet mode, but however I turn the screen remains in the same landscape as it was when it was docked.

  Name of the operating system: Microsoft Windows Enterprise 10
  OS version: 10.0.10586 n/a build 10586

  Can someone tell me what I need to do to get this feature works please?

  Have you installed the drivers Win8 or Win10?

  Have you installed the driver system of Toshiba and Toshiba system settings?

• Satellite C660 - white, mirrored stripes, white screen

  Hello
  I just got a problem with my laptop. It seems that there is a bad connection between my screen and the light-emitting diode: only got white strips, a mirror screen, a white screen or a screen flashing right now so I can not even move my mouse cause, I don't see anything.
  A few pictures: [1 | http://tinypic.com/r/11ae96t/5] [2 | http://tinypic.com/r/2qkmesi/5] [3 | http://tinypic.com/r/2jb7jmu/5] [4 | http://tinypic.com/r/fkwbhj/5] [5 | http://tinypic.com/r/2q2lbpv/5]
  Thanks in advance.

  This issue related material should be checked and repaired by the authorized service provider. Laptop must be disassembled and checked.

  Is your laptop still under warranty?

• Dell coming Pro 8 with 10 Windows, all of a sudden not in tablet mode on-screen keyboard

  Yesterday it worked.  -Although I'm worried I'm headed on a bad road for the last month, I started to have to hold the power button about 5 seconds to turn it on.   I upgraded from Windows 8 to 10 Windows on this tablet more than 6 months, in August 2015.

  This new problem is that when I'm in tablet mode and use an application non-tablette as the browser Chrome, the on-screen keyboard fails to materialize when I type an entry field.  The same thing happens when I use another Windows program which is a map file.  But he can't, it's that the on-screen keyboard is launched even in tablet mode, when using Office programs such as Word or Excel or Microsoft browser instead of Chrome Edge.

  If I manually switch non-tablette mode, on-screen keyboard doesn't show when I type an entry, either field, but at least I put in place so that the keyboard icon appears in the taskbar in non-tablette mode.  So I can choose the keyboard from there I can enter data into the search field of the browser.

  This used to work, up until yesterday, while without having to manually switch off the table mode, I could choose the browser from Google app from the START screen, he'd jump open on the screen and when I typed an entry field research, the on-screen keyboard will be launched automatically.

  Hi, I had the same problem and found a way around - hold - click the lower panel until a small window with 4 options of additional icons will appear. One of the options is 'See the keyboard key' - check it.

  In case that the keyboard does not appear in Chrome automatically, you can fill it with this button.

  It will be useful.

  Miro

• Support on the mirror of the screen and Windows 7 implementation

  Can I enjoy with my Windows 7 mirror screen or not? What are the steps I need to follow?

  Hi John,.

  When you connect an additional monitor to your laptop, Windows automatically detects the monitor and displays your computer's desktop. You can then choose how you want your desktop to appear and customize the display settings, such as the color depth and screen resolution. You can view the following for more information Microsoft article.

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows/move-Windows-between-multiple-monitors#1TC=Windows-7

  Work and play better with multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.