cRIO-9002 - sees in MAX but Can not control
I have a cRIO-9002 with chassis cRIO-9201, I try to configure so that I can use it for a new project in the lab that I am working. So far I was able to get on our network and am able to see to the MAX; However, once I click on it in MAX, MAX is here trying to cool off for a while and system resources all is listed as not available (once MAX gives up on refresh). I'm not able to see the installed software and it disconnects frequently. I turned on the CONSOLE OUT on the cRIO and here is the result:
[2J
General software embedded STPC BIOS 2000 (tm) revision 5.2
Copyright (C) 2003 General Software, Inc.
Copyright (C) 2004 National Instruments Corp.
Controller OR cRIO-9002
[23; 01 H (C) 1996-2003 General Software, Inc..]
STPC - 5.2 - 01DE-EB2E [01; 01 H [06; 01 PM
00000016K low memory passed
00000512
00000589
00000000K Ext memory passed
00031744 [08; 01 pm [s [u [08; 01HWait...]]]
PCI device table.
Bus Dev Func VendID DevID class Irq
0 b 00 00 and 104 has 0201 Host Bridge
0c 00 00 104 a 0210 ISA Bridge
00 0D a 00 104, 0229 IDE Controller 11
0E 00 00 104 a 0230 Serial Bus 11
0f 00 00 104 a 0238 Ethernet 11
00 18 00 1093 705E 11 unknown device
1F 00 00 104 a 0981 Ethernet 10
[2JBIOS review: 1.1.9 (10/08/04)]
Firmware revision: 10.1.94
LabVIEW RT the start player...
FAT16
Jump to 07E0:0000
Checksum: 018D9C6A
Executive in time real LabVIEW
Construction time: June 21, 2011 01:17:21
(C) copyright 2002-2011 National Instruments Corporation
MAX system identification name: englab-fpga
LabVIEW time real Single-Core Kernel
The initialization of the network...
Device 1 - MAC addr: 00:80:2F:0 A: 7E:E2 - 131.151.115.38/22 (primary - auto)
System Web server started
NOR-RIO 4.0 Server started successfully.
NI-VISA 5.1 Server started successfully.
Welcome to LabVIEW Real-time 11.0
FTP SERVER ERROR: Cannot start threaded
FTP SERVER ERROR: Cannot start threaded
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
FTP SERVER ERROR: Could not create threaded command
Of course, there is some kind of problem here, but I don't know what it is. Any ideas?
Hi nslogan
What version of the drivers OR RIO, LabVIEW and LabVIEW RT do you have installed on your computer?
OR MAX was able to communicate the fine before? Nothing changed?
Is your cRIO executes any RT executable launch, request or communication with an FTP server?
If your computer has all the software and drivers may be easier trying to format and reinstall the cRIO, it doesn't take long and it takes a few simple steps.
How do I format my target in real time and reinstall the software?
Concerning
R. Esteban
Tags: NI Hardware
Similar Questions
-
MY PHONE SCREEN IS BLACK, PHONE WILL RING AND ICAN HEAR THROUGH THE MESSAGES BUT CAN NOT SEE ANYTHING AT ALL
Try this restart your iPhone, iPad or iPod touch - Apple Support
If this does not work, it may be a hardware problem.
Hope this helps, good luck to you.
-
Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor. The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?
What specific mouse?
-
Absent voice memo to the homescreen on IPhone SE there is no 'utility' or 'extras' anywhere; folder Siri is voice memo, but can not get to the home screen? How to apply for voice memo on the homescreen?
Try going into settings > general > reset > reset home screen presentation.
-
I download the latest version of Firefox, but when I go to sign up for google + it tells me that my browser is no longer supported. I tried uninstalling and everything, but can not get the new version appears. Any Suggestions?
Please see that.
-
I can work between my Mac and iPad, but can not get my iphone to receive transfers?
I can work on spreadsheets Numbers between my Mac and iPad, but can not get my iphone to receive transfers? The numbers icon at bottom left of the screen, but none of my worksheets appear on my iPhone.
Did you numbers is synchronization correctly via iCloud on your iPhone? You could check that the connection of numbers to iCloud is turned on at two places:
Settings > iCloud > iCloud Drive > numbers
and,
Settings > numbers > use iCloud
SG
-
Hi everyone, this is my first post, also help on the post would be appreciated.
I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.
Thanks in advance
Newbie
The only way to install an ipad app is through the app store. PC or Mac software does not run on the ipad. Search in the contacts link at the bottom right of this page. Give apple a call.
I guess is the icon for pages in icloud for storing documents pages. At the same time, apple had a cloud based pages. Not sure what happened to her.
R
-
Webcam is displayed in devices and printers, but can not get turned on?
Original title: webcam 270
Webcam is displayed in devices and printers, but can not get turned on?Hello
· What operating system do you use?
· You're using a built-in or external webcam?
· What is the brand and model of the webcam?
· Were there recent changes made on the computer before the show?
Method 1:
I suggest you to check in Device Manager if you can detect the webcam. See the link below to open the Device Manager in windows 7:
http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
Method 2:
Try to update the drivers for the webcam from the manufacturing site and check if it works:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Method 3:
Use the hardware and devices Troubleshooter to fix the problem.
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 4:
I also suggest that you run the Microsoft fixit tool and check if that helps:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
-
After update readers, my cdrom can play music but can not burn a cd
ORIGINAL TITLE: Windows audio
Hello...
WELL, AFTER UPDATING READERS, NOW MY CDROM (2 OF THEM) CAN PLAY MUSIC BUT CAN NOT BURN A CD.
CAN YOU HELP ME?
Thank you.
RESPECTFULLY,.
JOE.
Hello
1. what operating system is installed on the computer?
2. What is the full and exact error message?
I suggest to see the link and try to run the fix it:
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
If the problem is not resolved, please provide more information to help you best.
-
share external hard drive
I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office. I want to be able to back up my laptop hard disk external. Advice please.
geraintjo
I do not use homegroups, but 'true' to share, so I don't know how this is supposed to work with homegroups. But usually he should share a drive or folder, first before you can access it from another machine. (for example, click on the drive/folder properties and go to the sharing tab)
-
When I double click on an email to open, the following component is too left. I tried getting a double arrow and sliding to the right, but can not.
original title: Windows Mail issue.You are the very welcome.
-
The update wants to do a net framework 1.1 sp1 on Windows xp, vista and windows swrver 2008 x 86 (KB2656353), but can not. Why not? He simply has it again and again without updating.
I finally got by a 'person' and he took over the computer. It took almost 2 hours, but he finally managed to fix the problem and get the update installed. Hooray!
-
prospects for bt infinity
I recently changed my home to infinity of BT broadband. Now I can't access my email works through outlook over a VPN. The signin VPN works ok, I can see my network co., but can not use outlook. I get the following error at startup of outlook.
Task 'Microsoft Exchange Server' reported an error (0 x 80040115): ' the connection to the Microsoft Exchange Server is unavailable. Outlook must be online or connected to complete this action. »
Anyone have any ideas?
Allan M
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.
Ramata Thakur
-
When I start my computer, it tries to find the solution center but can not be found how can I download this program?
original title: Solution Center?I think that the solution center is a part of HP. I go to programs - run and type msconfig. Click the Startup tab and look for Solution Center, then uncheck the box so that it will not start then click on apply and restart the computer
OrYou can put in the HP printer drive and re install the printer that can also work. Hope this helps -
Compacted Outlook Express and save some of my emails. Now, I need access to the following, but can not open them. How to reopen these emails?
Hi Redtiger1705,
Lost emails immediately after compact preforming?If so, Outlook Express creates BAK files before compaction. They are copied there as a precaution, in case something goes wrong with the compaction. The following steps should help those rear:
1) open Outlook Express and go to tools, Options, maintenance, store folder. Copy the entire path to the storage folder, and then click OK. Close Outlook Express.(2) go to the basket and search for all files with the .bak extension. Restore the most recent .bak files. That he will put in the OE store folder, but still like a BAK file.
(3) click on start, run and paste the path that you copied in step 1 in the run box, and then press ENTER.
4) click Tools, Folder Options. In the Folder Options window, click the view tab.(5) less advanced, uncheck the "Hide extensions for known file types".(6) you should see the two sent a Sent Items.dbx from the file as well as the Items.bak. Rename the Sent Items.DBX to Sentold.dbx and Rename Items.Bak sent to Sent Items.DBX. When you open OE, your messages sent items must be restored.Please let me know if I can be of further assistance!Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
hear the headphones instead of speakers
On an Z210 workstation, I plug in a headset to work known with headphones and microphone in the sockets on the front or back and hear the sounds through the speakers from the computer instead of the helmet headset. Microphone seems to work because t
-
ENVY 15 NOTEBOOK PC: Laptop memory internal reference
I have a PORTABLE PC ENVY 15 product number: E2B61LA / 16 GB RAM / 512 GB SSD and is excellent / update Win10 whiout problems. What is the memory of reference, which can be inserted in the internal slot of your laptop?This isn't a memory slot? Is the
-
Pavilion F9J38UA #ABA: lack of Ethernet on Win 7 install drivers
I bought a laptop Pavilion, and the first thing I did was to downgrade to windows 7. Now, I have no drivers for the following items: However the two I care most are my ethernet and network controller. I have tried everything I know (and apparently ev
-
Aloha, as he attempted to remove all kinds of excess programs I think I didn't need, I think I deleted something that I do. When you plug my headphones for personal use, the speakers continue to work but the headphones does not work. Can someone help
-
No sound in Vista Ultimate SP2 WMC for DVD movies
Hi all. Vista Ultimate SP2 x 32, I want to watch movies on my HP Pavilion zv6000 DVD. The WMC play the DVD very well, but there is no sound. The sound works well otherwise game and music DVD OK. It is only the film DVD with no sound. I installed the